Ru(bpy)3-doped silica nanoparticle DNA probe for the electrogenerated chemiluminescence detection of DNA hybridization

A sensitive electrogenerated chemiluminescence (ECL) detection of DNA hybridization, based on tris(2,2′-bipyridyl)ruthenium(II)-doped silica nanoparticles (Ru(bpy)₃²⁺-doped SNPs) as DNA tags, is described. In this protocol, Ru(bpy)₃²⁺-doped SNPs was used for DNA labeling with trimethoxysilylpropydiethylenetriamine(DETA) and glutaraldehyde as linking agents. The Ru(bpy)₃²⁺-doped SNPs labeled DNA probe was hybridized with target DNA immobilized on the surface of polypyrrole (PPy) modified Pt electrode. The hybridization events were evaluated by ECL measurements and only the complementary sequence could form a double-stranded DNA (dsDNA) with DNA probe and give strong ECL signals. A three-base mismatch sequence and a non-complementary sequence had almost negligible responses. Due to the large number of Ru(bpy)₃²⁺ molecules inside SNPs, the assay allows detection at levels as low as 1.0 × 10⁻¹³ mol l⁻¹ of the target DNA. The intensity of ECL was linearly related to the concentration of the complementary sequence in the range of 2.0 × 10⁻¹³ to 2.0 × 10⁻⁹ mol l⁻¹.     

Metal-organic framework Cu3 (BTC)2(H2O)3 catalyzed Aldol synthesis of pyrimidine-chalcone hybrids

A typical metal organic framework, [Cu₃ (BTC)₂(H₂O)₃, BTC = 1,3,5-benzene tricarboxylate] has been used for the synthesis of pyrimidine-chalcones. We have explored a green synthesis of pyrimidine chalcones under Cu₃(BTC)₂ catalysis by Aldol condensation. Easy isolation of product, excellent yield, and recyclable catalyst makes this reaction eco-friendly. The technology was demonstrated to be applicable to the synthesis of a host of chemical hybrids.     

Mn influence on the electrochemical behaviour of Li3V2(PO4)3 cathode material

The role played by the substitution of Mn on the electrochemical behaviour of Li₃V₂(PO₄)₃ has been investigated. Independently of the synthesis route, the Mn doping improves the electrochemical features with respect to the undoped samples. Different reasons can be taken into consideration to explain the electrochemical enhancement. In the sol–gel synthesis the capacity slightly enhances due to the Mn substitution on both the V sites, within the solubility limit x = 0.124 in Li₃V_2−xMn_x(PO₄)₃. In the solid state synthesis the significant capacity enhancement is preferentially due to the microstructural features of the crystallites and to the LiMnPO₄ phase formation.     

A novel method to synthesize whisker-like Co(OH)2 and its electrochemical properties as an electrochemical capacitor electrode

A loose whisker-like Co(OH)₂ was synthesized by means of polyethylene glycol 4000 as soft template under ultrasonic condition, and investigated as an active electrode material for electrochemical capacitors. The composition and microstructure of the as-prepared Co(OH)₂ were investigated by X-ray diffraction spectroscopy and transmission electron microscopy. The formation mechanism of the whisker-like Co(OH)₂ was attentively proposed based on Fourier transform infrared spectroscopy analysis. Electrochemical studies revealed that the whisker-like Co(OH)₂ delivered a specific capacitance of 325 F/g at a current density of 20 mA/cm² (ca. 1.3 A/g) and even 279 F/g at 80 mA/cm² (ca. 5.3 A/g) due to its special nanostructure, indicating its fast electrochemical response property. A capacitance attenuation of ca. 7% over 1000 cycles meant the good cyclic stability of the whisker-like Co(OH)₂ for electrochemical capacitors application.     

A reddish orange stoichiometric phosphor LiEu(PO3)4 for white light-emitting diodes

Stoichiometric phosphors LiGd_1−xEu_x(PO₃)₄(x=0, 0.2, 0.4, 0.6, 0.8, 1.0) were synthesized via traditional solid state reactions. The X-ray powder diffraction measurements show that all prepared samples are isostructural with LiNd(PO₃)₄. Eu³⁺ doped phosphors can emit intense reddish orange light under the excitation of near ultraviolet light from 370 to 410 nm. The strongest two at 591 and 613 nm can be attributed to the transitions from excited state ⁵D₀ to ground states ⁷F₁ and ⁷F₂, respectively. The typical chromaticity coordinates (x=0.620, y=0.368) of Eu³⁺ doped phosphors are in red area. The recorded absorbance spectra indicate that there is effective absorbance in the near UV region for all Eu³⁺ doped samples. Present research indicates that LiGd_1–xEu_x(PO₃)₄ is a promising phosphor for white light-emitting diodes.     

Self-assembled monolayers of Vitamin B12 disulphide derivatives on gold

Using the self-assembly technique, novel monolayers on gold have been prepared from new cobyrinate dialkyl disulphide derivatives. The successful formation is proved by cyclic voltammetry and by in situ ellipsometry. The electrochemical characterisation by reductive desorption allows to estimate the surface coverage and reveals that the presence of two cobyrinates introduces some disorganisation in the monolayer. More packed and organised monolayers have been observed in systems containing only one terminal redox centre. From ellipsometric measurements a possible orientation of the cobyrinate centre in the adsorbed monolayer is modelled. The modified electrodes display electrocatalytic activity for the reduction of dissolved oxygen.     

PLFX-Co(phen)2+3复合物与CT-DNA的结合性质及切割活性

利用荧光光谱及流体动力学等方法,研究了普利沙星(PLFX)-Co(phen)32+与CT-DNA间的作用机理.荧光光谱测量结果表明:普利沙星和Co(phen)32+发生了结合作用形成了复合物;配比为2,1;向PLFX-Co(phen)32+体系中,加入CT-DNA后,复合物进一步与DNA相结合,结合常数为2.18×105L/mol.通过粘度法、熔点测定及凝胶电泳实验研究了复合物与CT-DNA的相互作用.结果表明体系与CT-DNA间主要是沟槽作用;PLFX-Co(phen)32+能够有效切割质粒DNA.     

Chemical instability of Cu3(BTC)2 by reaction with thiols

In contrast to Fe(BTC) (BTC: 1,3,5-benzenetricarboxylate), the crystal structure of Cu₃(BTC)₂, a commercial metal organic framework widely used as solid catalyst, collapses when contacted with thiols under mild reaction conditions forming copper nanoparticles.     

All-solid-state lithium battery with a three-dimensionally ordered Li1.5Al0.5Ti1.5(PO4)3 electrode

To fabricate all-solid-state Li batteries using three-dimensionally ordered macroporous Li_1.5Al_0.5Ti_1.5(PO₄)₃ (3DOM LATP) electrodes, the compatibilities of two anode materials (Li₄Mn₅O₁₂ and Li₄Ti₅O₁₂) with a LATP solid electrolyte were tested. Pure Li₄Ti₅O₁₂ with high crystallinity was not obtained because of the formation of a TiO₂ impurity phase. Li₄Mn₅O₁₂ with high crystallinity was produced without an impurity phase, suggesting that Li₄Mn₅O₁₂ is a better anode material for the LATP system. A Li₄Mn₅O₁₂/3DOM LATP composite anode was fabricated by the colloidal crystal templating method and a sol-gel process. Reversible Li insertion into the fabricated Li₄Mn₅O₁₂/3DOM LATP anode was observed, and its discharge capacity was measured to be 27 mA h g⁻¹. An all-solid-state battery composed of LiMn₂O₄/3DOM LATP cathode, Li₄Mn₅O₁₂/3DOM LATP anode, and a polymer electrolyte was fabricated and shown to operate successfully. It had a potential plateau that corresponds to the potential difference expected from the intrinsic redox potentials of LiMn₂O₄ and Li₄Mn₅O₁₂. The discharge capacity of the all-solid-state battery was 480 μA h cm⁻².     

Enhanced photoelectrocatalytic activity of FTO/WO3/BiVO4 electrode modified with gold nanoparticles for water oxidation under visible light irradiation

Gold nanoparticles were successfully deposited on FTO/WO₃/BiVO₄ electrode surface by means of electrolysis of AuCl₄⁻ ions. The composite films were characterized by SEM, XPS and XRD techniques. An increase in photocurrent and a negative shift of onset potential for water oxidation were observed upon modification of the electrode surface with the Au particles. The electrochemical impedance spectroscopy was used to confirm the acceleration of charge transfer process by Au deposition at the electrode surface. The photocurrent action spectrum did not correlate with the plasmonic absorbance of Au nanoparticles at 560 nm, suggesting that the Au nanoparticles increased charge separation without undergoing a plasmon resonance effect under visible light irradiation.     

Structure and electrochemical properties of nanocarbon-coated Li3V2(PO4)3 prepared by sol-gel method

A liquid-based sol-gel method was developed to synthesize nanocarbon-coated Li₃V₂(PO₄)₃. The products were characterized by XRD, SEM and electrochemical measurements. The results of Rietveld refinement analysis indicate that single-phase Li₃V₂(PO₄)₃ with monoclinic structure can be obtained in our experimental process. The discharge capacity of carbon-coated Li₃V₂(PO₄)₃ was 152.6 mAh/g at the 50th cycle under 1C rate, with 95.4% retention rate of initial capacity. A high discharge capacity of 184.1 mAh/g can be obtained under 0.12C rate, and a capacity of 140.0 mAh/g can still be held at 3C rate. The cyclic voltammetric measurements indicate that the electrode reaction reversibility is enhanced due to the carbon-coating. SEM images show that the reduced particle size and well-dispersed carbon-coating can be responsible for the good electrochemical performance obtained in our experiments.     

Facile synthesis and flame retardant performance of NaAl(OH)2CO3 whiskers

The regular and well-dispersed NaAl(OH)₂CO₃ whiskers were successfully synthesized via facile hydrothermal route using aluminium isopropoxide and NaHCO₃. The effects of reactants and reaction temperature on the structure and morphology of NaAl(OH)₂CO₃ whiskers have been investigated. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermo-gravimetric analysis (TGA) were employed to characterize the synthesized samples. Most NaAl(OH)₂CO₃ whiskers possess an average diameter of about 500 nm and lengths ranging from 10 to 30 μm. NaAl(OH)₂CO₃ whiskers exhibit excellent flame retardant performance and mechanical strength in poly(ethylene-co-vinyl acetate) matrix (EVA).     

Influence of nature, concentration and pH of buffer acid-base system on rate determining step of the electrochemiluminescence of Ru(bpy)3 with tertiary aliphatic amines

The electrogenerated chemiluminescence (ECL) of Ru(bpy)₃²⁺ (bpy = 2,2′-bipyridyl) with tertiary aliphatic amines as co-reactants, was theoretically and experimentally studied as a function of the pre-equilibria involved in the ammonium proton lost and in relation to the nature of the rate determining step. Transient potential steps were used with a 3-mm glassy carbon disk electrode or carbon fiber ultramicroelectrodes array to investigate emission behavior in a variety of aqueous solution types, containing phosphate, tartrate and phthalate acid-base systems at differing pH values. The emission of Ru(bpy)₃²⁺ resulting from the reaction with n-tripropylamine (TPrA), tri-isobutylamine (TisoBuA), n-tributylamine (TBuA), methyl-di-n-propylamine (MeDPrA) and triethylamine (TEtA) in varying acid-base media was interpreted on the basis of the quoted pre-equilibria, ammonium pK_a being known. The nature of the rate determining steps changes depending on pH. Above pH ≈ 5 the amine neutral radical formation is the rate determining step and, is independent of pH with rate constant close to 10³ s⁻¹; below pH ≈ 5 the rate determining step becomes the deprotonation of the ammonium ion, operated by different bases present in solution. Different amines in the same acid-base system showed analogous ECL behavior, conditioned by the chosen acid base system. A single amine in different acid-base systems showed different kinetic behaviors, due to the dissociation constants of the chosen buffers. The concentration of the acid-base system also played an important role and influenced emission intensity and shape. ECL emission were simulated by finite difference methods, implementing a previously proposed mechanism by including the relevant pre-equilibria. Simulation may also give estimates of the pK_a values of the ammonium ions. An ion pair formation between R₃N⁺ and the mostly charged species present in solution is hypothesized to explain the contradictory experimental results concerning the reaction mechanism of the proton lost of the radical cation.     

Electrochemical assembling of aligned porous Nd(OH)3 nanobelts with high performance in water treatment

In this study, aligned Nd(OH)₃ nanobelts with abundant mesopores are successfully assembled by a facile, and template-free electrochemical method. The well-defined porous structure in Nd(OH)₃ nanobelts leads to its superior adsorption and the remove rate of Congo red contained in wastewater reach to 99.1% in 30 min.     

The preparation of Mg3Si2O5(OH)4 nanotubes under solvothermal conditions

With magnesium carbonate hydroxide and nanoporous silica as the starting materials, chrysotile (Mg₃Si₂O₅(OH)₄) nanotubes were prepared by using a solvothermal method at 400^∘C within four hours. This new method needs no strong alkali medium and the reaction time is very short. EDX analysis showed a molar ratio of 3Mg:2Si:9O of the product. Selected Area Electron Diffraction (SAED) pattern indicated that the tube axis is along [100] direction. HRTEM image showed the nanotubes were multi-walled and the distance between the two close layers was about 0.75 nm, which is very near to the distance of {001} planes. Thus, combining the results of SAED and HRTEM, we can conclude that the {001} planes of serpentine roll up along the [100] direction to form the tubular structure. The effects of various reaction conditions and the formation mechanism were also discussed.     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries

Cr-doped Li₃V_2−xCr_x(PO₄)₃/C (x = 0, 0.05, 0.1, 0.2, 0.5, 1) compounds have been prepared using sol–gel method. The Rietveld refinement results indicate that single-phase Li₃V_2−xCr_x(PO₄)₃/C with monoclinic structure can be obtained. Although the initial specific capacity decreased with Cr content at a lower current rate, both cycle performance and rate capability have excited improvement with moderate Cr-doping content in Li₃V_2−xCr_x(PO₄)₃/C. Li₃V_1.9Cr_0.1(PO₄)₃/C compound presents an initial capacity of 171.4 mAh g⁻¹ and 78.6% capacity retention after 100 cycles at 0.2C rate. At 4C rate, the Li₃V_1.9Cr_0.1(PO₄)₃/C can give an initial capacity of 130.2 mAh g⁻¹ and 10.8% capacity loss after 100 cycles where the Li₃V₂(PO₄)₃/C presents the initial capacity of 127.4 mAh g⁻¹ and capacity loss of 14.9%. Enhanced rate and cyclic capability may be attributed to the optimizing particle size, carbon coating quality, and structural stability during the proper amount of Cr-doping (x = 0.1) in V sites.     

Study of a gold electrode modified by trans-[Ru(NH3)4(Ist)SO4] to produce an electrochemical sensor for nitric oxide

The modification of a gold electrode surface by electropolymerization of trans-[Ru(NH₃)₄(Ist)SO₄]⁺ to produce an electrochemical sensor for nitric oxide was investigated. The influence of dopamine, serotonin and nitrite as interferents for NO detection was also examined using square-wave voltammetry (SWV). The characterization of the modified electrode was carried out by cyclic voltammetry, electrochemical quartz crystal microbalance (EQCM) and SERS techniques. The gold electrode was successfully modified by the trans-[Ru(NH₃)₄(Ist)SO₄]⁺ complex ion using cyclic voltammetry. The experiments show that a monolayer of the film is achieved after ten voltammetric cycles, that NO in solution can coordinate to the metal present in the layer, that dopamine, serotonin and nitrite are interferents for the detection of NO, and that the response for the nitrite is much less significant than the responses for dopamine and serotonin. The proposed modified electrode has the potential to be applied as a sensor for NO.     

Effect of HfO2 content on the microstructure and piezoelectric properties of (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃–xHfO₂ [BNBT–xHfO₂] lead-free ceramics were prepared using the conventional solid-state reaction method. Effects of HfO₂ content on their microstructures and electrical properties were systematically studied. A pure perovskite phase was observed in all the ceramics with x=0–0.07 wt%. Adding optimum HfO₂ content can induce dense microstructures and improve their piezoelectric properties, and a high depolarization temperature was also obtained. The ceramics with x=0.03 wt% possess optimum electrical properties (i.e., d₃₃~168 pC/N, k_p~32.1%, Q_m~130, ε_r~715, tan δ~0.026, and T_d~106 °C, showing that HfO₂-modified BNBT ceramics are promising materials for piezoelectric applications.