Enhanced Ionic Conductivity in Poly(ethylene oxide)/Layered Double Hydroxide Nanocomposite Electrolytes

All solid-state poly(ethylene oxide) (PEO) nanocomposite electrolytes were made containing nanoscale fillers of layered double hydroxides (LDHs). Two kinds of oligo(ethylene oxide) modified LDHs were prepared by template method, and added into PEO/LiClO₄ matrix (with EO/Li molar ratio of 8) to study the effect on the ionic conductivity of PEO/LDH nanocomposite electrolytes. The structures of the modified LDHs were characterized by infrared spectra, thermogravimetric analysis and wide-angle X-ray diffraction. The results show that the oligo(ethylene oxide) with phosphonate anion can be effectively intercalated into the gallery region of LDHs and formed as an organic-inorganic hybrid (PLDH). With enhanced compatibility of LDH sheets by oligo(ethylene oxide) surface modification, the PEO/PLDH nanocomposite exhibits fully exfoliation morphology. The well dispersed LDH layers in PEO/LiClO₄/PLDH nanocomposite electrolytes rendering the formation of amorphous phase, results in an enhancement of ionic conductivity by three orders of magnitude compared to the pure PEO/LiClO₄ polymer electrolyte. This novel nanocomposite electrolytes system with high ionic conductivity will be benefited to fabricate the thin-film type of Li-polymer secondary battery. This revised version was published online in July 2006 with corrections to the Cover Date.     

Nanocomposite polymer electrolytes containing silica nanoparticles: Comparison between poly(ethylene glycol) and poly(ethylene oxide) dimethyl ether

Nanocomposite polymer electrolytes consisting of low molecular weight poly(ethylene oxide) (PEO), iodine salt MI (M = K⁺, imidazolium⁺), and fumed silica nanoparticles have been prepared and characterized. The effect of terminal group in PEO, i.e., hydroxyl (? OH) and methyl (CH₃) using poly(ethylene glycol) (PEG) and PEO dimethyl ether (PEODME), respectively, was investigated on the interactions, structures, and ionic conductivities of polymer electrolytes. Wide angle X‐ray scattering (WAXS), differential scanning calorimetry (DSC), and complex viscositymeasurements clearly showed that the gelation of PEG electrolytes occurred more effectively than that of PEODME electrolytes. It was attributed to the fact that the hydroxyl groups of PEG participated in the hydrogen‐bonding interaction between silica nanoparticles, and consequently helped to accelerate the gelation reaction, as confirmed by FTIR spectroscopy. Because of its interaction, the ionic conductivities of PEG electrolytes (maximum value ～ 6.9 × 10^?4 S/cm) were lower than that of PEODME electrolytes (2.3 × 10^?3 S/cm). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Fabrication and characterization of PEO/PPC polymer electrolyte for lithium‐ion battery

A new poly(propylene carbonate)/poly(ethylene oxide) (PEO/PPC) polymer electrolytes (PEs) have been developed by solution‐casting technique using biodegradable PPC and PEO. The morphology, structure, and thermal properties of the PEO/PPC polymer electrolytes were investigated by scanning electron microscopy, X‐ray diffraction, and differential scanning calorimetry methods. The ionic conductivity and the electrochemical stability window of the PEO/PPC polymer electrolytes were also measured. The results showed that the T_g and the crystallinity of PEO decrease, and consequently, the ionic conductivity increases because of the addition of amorphous PPC. The PEO/50%PPC/10%LiClO₄ polymer electrolyte possesses good properties such as 6.83 × 10^?5 S cm^?1 of ionic conductivity at room temperature and 4.5 V of the electrochemical stability window. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Morphology,crystallinity, and electrochemical properties of in situ formed poly(ethylene oxide)/TiO2 nanocomposite polymer electrolytes

A method to produce nanocomposite polymer electrolytes consisting of poly(ethylene oxide) (PEO) as the polymer matrix, lithium tetrafluoroborate (LiBF₄) as the lithium salt, and TiO₂ as the inert ceramic filler is described. The ceramic filler, TiO₂, was synthesized in situ by a sol–gel process. The morphology and crystallinity of the nanocomposite polymer electrolytes were examined by scanning electron microscopy and differential scanning calorimetry, respectively. The electrochemical properties of interest to battery applications, such as ionic conductivity, Li⁺ transference number, and stability window were investigated. The room‐temperature ionic conductivity of these polymer electrolytes was an order of magnitude higher than that of the TiO₂ free sample. A high Li⁺ transference number of 0.51 was recorded, and the nanocomposite electrolyte was found to be electrochemically stable up to 4.5 V versus Li⁺/Li. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2815–2822, 2003     

In situ study of ionic conductivity for polyether-LiCF3SO3 electrolytes with subcritical and supercritical CO2

In situ measurements of the ionic conductivity were performed on polyethers, poly(ethylene oxide) (PEO) and poly(oligo oxyethylene methacrylate) (PMEO), with lithium triflate (LiCF₃SO₃) as crystalline and amorphous electrolytes, and at CO₂ pressures up to 20 MPa. Both PEO and PMEO systems in subcritical and supercritical CO₂ increased more than five fold in ionic conductivity at 40 °C composed to atmospheric pressure. The pressure dependence of the ionic conductivity for PEO electrolytes was positive under CO₂, and increased by two orders of magnitude under pressurization from 0 to 20 MPa, whereas it decreases with increasing pressure of N₂. The enhancement is caused by the plasticizing effect of CO₂ molecules that penetrate into the electrolytes.     

Ionic conductivity and interfacial properties of polymer electrolytes based on PEO and boroxine ring polymer

Blended polymer electrolytes based on poly(ethylene oxide) (PEO) and boroxine ring polymer (BP) solvated with lithium triflate were formulated and evaluated. Compared to PEO–salt polymer electrolyte, ionic conductivities of blended polymer electrolytes were two orders of magnitude higher in a low‐temperature range; as well, lithium transference numbers were increased to ～ 0.4. These were due to the increased mobility and anion trapping of boroxine rings. BP also exhibited the stabilizing effect on lithium–polymer electrolyte interface, and a reduced interfacial resistance between lithium metal and the polymer electrolyte was found with increasing of BP content. Polymer electrolytes based on PEO and BP are suitable for use in lithium secondary battery. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 17–21, 2002; DOI 10.1002/app.10090     

Enhancement of ionic conductivity of PEO-LiTFSI electrolyte upon incorporation of plasticizing lithium borate

By dissolving plasticizing lithium borate (Salt A) and LiN(SO₂CF₃)₂ (LiTFSI) at different ratios in poly(ethylene oxide) (PEO), a series of solid-state mix-salt polymer electrolytes were prepared. Higher ionic conductivities were determined for the mix-salt polymer electrolytes than for the pure-salt counterparts. The optimum mixing ratio of the two salts was explored. The electrochemical stability and interfacial performance of the mix-salt polymer electrolytes were also investigated. A battery testing using LiNi_0.8Co_0.2O₂ as cathode material and lithium as anode material was executed to assess the cyclic performance of the electrolyte.     

Polymer electrolytes from PEO and novel quaternary ammonium iodides for dye-sensitized solar cells

Polymer electrolytes were prepared by blending high molecular weight poly(ethylene oxide) (PEO) and a series of novel quaternary ammonium iodides, the polysiloxanes with oligo(oxyethylene) side chains and quaternary ammonium groups. X-ray diffraction (XRD) measurements ensured relatively low crystallinity when the quaternary ammonium iodides were incorporated into the PEO host. The ionic conductivity of these complexes was improved with the addition of plasticizers. The improvement in the ionic conductivity was determined by the polarity, viscosity and amounts of plasticizers. A plasticized electrolyte containing the novel quaternary ammonium iodide was successfully used in fabricating a quasi-solid-state dye-sensitized solar cell for the first time. The fill factor and energy conversion efficiency of the cell were calculated to be 0.68 and 1.39%, respectively.     

Nanocomposite polymer electrolytes for solid-state lithium-ion batteries with enhanced electrochemical properties

Solid-state polymer electrolytes (SPEs) have attracted significant attention owing to their improvement in high energy density and high safety performance. However, the low lithium-ion conductivity of SPEs at room temperature restricts their further application in lithium-ion batteries (LIBs). Herein, we propose a novel poly (ethylene oxide) (PEO)-based nanocomposite polymer electrolytes by blending boron-containing nanoparticles (BNs) in the PEO matrix (abbreviated as: PEO/BNs NPEs). The boron atom of BNs is sp²-hybridized and contains an empty p-orbital that can interact with the anion of lithium salt, promoting the dissociation of the lithium salts. In addition, the introduction of the BNs could reduce the crystallinity of PEO. And thus, the ionic conductivity of PEO/BNs NPEs could reach as high as 1.19 × 10⁻³ S cm⁻¹ at 60°C. Compared to the pure PEO solid polymer electrolyte (PEO SPEs), the PEO/BNs NPEs showed a wider electrochemical window (5.5 V) and larger lithium-ion migration number (0.43). In addition, the cells assembled with PEO/BNs NPEs exhibited good cycle performance with an initial discharge capacity of 142.5 mA h g⁻¹ and capacity retention of 87.7% after 200 cycles at 2 C (60°C).     

Morphological,structural, dielectric and electrical properties of PEO–ZnO nanodielectric films

The morphological, structural, dielectric and electrical properties of aqueous solution-cast prepared poly(ethylene oxide)–zinc oxide (PEO–ZnO) nanocomposite films have been investigated as a function of ZnO nanoparticle concentrations up to 5 wt%. Scanning electron microscopy (SEM) images of these films show that the morphology of pristine PEO aggregated spherulites changes into fluffy, voluminous and highly porous with dispersion of ZnO nanoparticles into the PEO matrix. X-ray diffraction (XRD) study confirms that the crystalline phase of PEO greatly reduces at 1 wt% ZnO, and it again increases gradually with further increase of ZnO concentration. The dielectric relaxation spectroscopy (DRS) over the frequency range 20 Hz–1 MHz reveals that the real part of complex dielectric permittivity at audio frequencies decreases non-linearly whereas it remains almost constant at radio frequencies for these polymeric nanocomposites. Dispersion of nanosize ZnO particles into the PEO matrix reduces the values of dielectric permittivity which also exhibits a correlation with the dispersivity of ZnO nanoparticles. The relaxation peaks observed in the dielectric loss tangent and electric modulus spectra reveal that the electrostatic interactions of nanoscale ZnO particles with the ethylene oxide functional dipolar group of PEO monomer units decrease the local chain segmental dynamics of the polymer. Real part of ac conductivity spectra of these films have been analyzed by power law fit over the audio and radio frequency regions, respectively, and the obtained dc conductivity values for these regions differ by more than two orders of magnitude. The temperature dependent relaxation time and dc conductivity values of the nanodielectric material obey the Arrhenius relation of activation energies and confirm a correlation between dc conductivity and PEO chain segmental motion which is exactly identical to the characteristics of solid polymer electrolytes. Results imply that these nanocomposite materials can serve as low permittivity flexible nanodielectric for radio frequency microelectronic devices and also as electrical insulator for audio frequency operating conventional devices in addition to their suitability in preparation of solid polymer electrolytes.     

Synthesis,characterization and electrical properties of the novel polymer electrolytes based on polyesters containing ethylene oxide moiety

The relationship between the structure and ionic conductivities of the polymer electrolytes formed with the aliphatic polyesters containing a different number of ethylene oxide (EO) units and lithium perchlorate has been investigated. These complexes were observed to be completely amorphous and showed the ionic conductivities up to 10⁻⁵ ~ 10⁻⁴ S/cm at 25 °C. The main factor that affects the ionic conductivity in these systems was proved to be a solvating capacity of the matrix polymer caused by the difference in the density of polar groups.     

Solid polymer electrolytes based on nanocomposites of ethylene oxide–epichlorohydrin copolymers and cellulose whiskers

With the aim of developing ion‐conducting solid polymer electrolytes that combine high ionic conductivity with good mechanical properties, we prepared and investigated nanocomposites of LiClO₄‐doped ethylene oxide‐epichlorohydrin (EO‐EPI) copolymers and nanoscale cellulose whiskers derived from tunicates. We show that homogeneous nanocomposite films based on EO‐EPI copolymers, LiClO₄, and tunicate whiskers can be produced by solution‐casting THF/water mixtures comprising these components and subsequent compression‐molding. The Young's moduli of the nanocomposites thus produced are increased by a factor of up to >50, when compared to the copolymers, whereas the electrical conductivities experience only comparably small reductions upon introduction of the whiskers. The nanocomposite with the best combination of conductivity (1.6 × 10^?4 S/cm at room temperature and a relative humidity of 75%) and Young's modulus (7 MPa) was obtained with a copolymer having an EO‐EPI ratio of 84 : 16, a whisker content of 10% w/w, and a LiClO₄ concentration of 5.8% w/w. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2883–2888, 2004     

Structural and dielectric studies of amorphous and semicrystalline polymers blend‐based nanocomposite electrolytes

The solid polymeric nanocomposite electrolyte (SPNE) films based on the blend of amorphous poly(methyl methacrylate) (PMMA) and semicrystalline poly(ethylene oxide) (PEO) (PMMA:PEO = 80:20 wt %) doped with lithium perchlorate (LiClO₄) salt and montmorillonite (MMT) clay nanofiller were prepared by classical solution cast, ultrasonic assisted solution cast and ultrasonication along with microwave irradiated solution cast followed by melt‐pressing methods. The X‐ray diffraction study of these electrolytes revealed the amorphous behavior with intercalated MMT structures. The suppressed crystallinity of PEO in the blend electrolyte complexes confirmed the existence of single discrete PEO chains confined within the PMMA domains. The dielectric relaxation spectroscopy of these materials was performed over the frequency range 20 Hz to 1 MHz, at ambient temperature. The presence of a singular relaxation peak in the loss tangent and electric modulus spectra of these electrolytes confirms a coupled cooperative chain segmental dynamics of the blend polymer owing to their miscible amorphous morphology. The behavior of transient complexes formed between the polymers functional groups, lithium cations and the intercalated MMT nanoplatelets was explored. The ambient temperature ionic conductivity of these electrolytes depends on the structural dynamics and the sample preparation methods. It is revealed that the presence of PEO in the PMMA matrix mainly governs the structural, dielectric, and ionic properties of these SPNE films. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41311.     

Ionic conductivity in polyethylene-b-poly(ethylene oxide)/lithium perchlorate solid polymer electrolytes

The ionic conductivity and phase arrangement of solid polymeric electrolytes based on the block copolymer polyethylene-b-poly(ethylene oxide) (PE-b-PEO) and LiClO₄ have been investigated. One set of electrolytes was prepared from copolymers with 75% of PEO units and another set was based on a blend of copolymer with 50% PEO units and homopolymers. The differential scanning calorimetry (DSC) results, for electrolytes based on the copolymer with 75% of PEO units, were dominated by the PEO phase. The PEO block crystallinity dropped and the glass transition increased with salt addition due to the coordination of the cation by PEO oxygen. The conductivity for copolymers 75% PEO-based electrolyte with 15 wt% of salt was higher than 10⁻⁵ S/cm at room temperature and reached to 10⁻³ S/cm at 100 °C on a heating measurement. The blend of PE-b-PEO (50% PEO)/PEO/PE showed a complex thermal behavior with decoupled melting of the blocks and the homopolymers. Upon salt addition the endotherms associated with PEO domains disappeared and the PE crystals remained untouched. The conductivity results were limited at 100 °C to values close to 10⁻⁴ S/cm and at room temperature values close to 3 × 10⁻⁶ S/cm were obtained for the 15 wt% salt electrolyte. Raman study showed that the ionic association of the highly concentrated blend electrolytes at room temperature is not significant. Therefore, the lower values of conductivity in the case of the blend with 50% PEO can be assigned to the higher content of PE domains leading to a morphology with lower connectivity for ionic conduction both in the crystalline and melted state of the PE domains.     

Influence of molar mass on the thermal properties,conductivity and intermolecular interaction of poly(ethylene oxide) solid polymer electrolytes

The sample preparation pathway of solid polymer electrolytes (SPEs ) influences their thermal properties, which in turn governs the ionic conductivity of the materials especially for systems consisting of a crystallizable constituent. Majority of poly(ethylene oxide) (PEO)‐based SPEs with molar masses of PEO well above 10⁴ g mol^?1 (where PEO is crystallizable and should reach an asymptote in thermal behaviour) display molar mass dependence of the thermal properties and ionic conductivities in non‐equilibrium conditions, as reported in the literature. In this study, PEO of different viscosity‐molar masses (M _η = 3 × 10⁵, 6 × 10⁵, 1 × 10⁶, 4 × 10⁶ g mol^?1) and LiClO₄ salt (0 to 16.7 wt%) were used. The SPEs were thermally treated under inert atmosphere above the melting temperature of PEO and then cooled down for subsequent isothermal crystallization for sufficient experimental time to develop morphology close to equilibrium conditions. The thermal properties (e.g. glass transition temperature, melting temperature, crystallinity) according to differential scanning calorimetry and the ionic conductivity obtained from impedance spectroscopy at room temperature (σ _DC ～ 10^?6 S cm^?1) demonstrate insignificant variation with respect to the molar mass of PEO at constant salt concentration. These findings are in agreement with the PEO crystalline structures using X‐ray diffraction and ion ? dipole interaction by Fourier transform infrared results. © 2017 Society of Chemical Industry     

Thermal, electrical and mechanical properties of plasticized polymer electrolytes based on PEO/P(VDF-HFP) blends

The polymer electrolytes composed of a blend of poly(ethylene oxide) (PEO) and poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) as a host polymer, mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and LiClO₄ as a salt were prepared by a solution casting technique. SEM micrographs show that P(VDF-HFP) is very compatible with PEO. The ionic conductivity of the electrolytes increases with increasing plasticizer content, while the mechanical properties become obviously worse. By addition of a certain content of PEO in P(VDF-HFP) matrix, a good compromise between high ionic conductivity and mechanical stability can be obtained.     

Melt-compounded salt-containing poly(ethylene oxide)/clay nanocomposites for polymer electrolyte membranes

The present study demonstrates the use of a simple and versatile melt-compounding route to prepare NaClO₄-containing poly(ethylene oxide) PEO/clay nanocomposites combining excellent mechanical properties with a competitive level of the ionic conductivity. The nanostructure and the resulting thermal, mechanical and conductive properties of the salt-containing PEO/clay nanocomposites were found to be highly sensitive to the clay type, i.e. aspect ratio of the clay, to the presence of an organic modifier in the intergallery spacing, and to the salt concentration. The highest increase of the shear storage modulus is obtained in the presence of single silicate layers, thus an exfoliated nanostructure, having a high aspect ratio. These structures are only obtained with an (polar) organically modified clay (Cloisite 30B), regardless of the presence of salt. The use of non-organically modified clays (Cloisite Na⁺ and Laponite) resulted in intercalated nanocomposites, with only a minor improvement in stiffness. A strong interaction between the Na⁺ from NaClO₄ and the Cloisite 30B silicate layers might be responsible for an increased PEO crystallinity and resultant additional increase in stiffness. A mechanism is proposed whereby the Na⁺ ions are drawn away from the PEO phase, to be complexed by the silicate layers, or even ion-exchanged with modifier cations. The addition of clay did not greatly affect the ion conductivity below the melt temperature of PEO. At higher temperatures, the nanocomposites displayed only slightly lower conductivities compared to the PEO/NaClO₄ complex, due to the presence of the clay platelets.     

Polymer electrolytes based on poly(ethylene glycol) dimethyl ether and the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate: Preparation, physico-chemical characterization, and theoretical study

Polymer electrolytes based on poly(ethylene glycol) dimethyl ether (PEGdME) and the ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) have been prepared and characterized by different techniques. Coordination of the IL by the polymer occurs mainly in the amorphous phase. This finding was correlated with previous theoretical investigations of a similar model for polymer electrolytes based on poly(ethylene oxide), PEO, and IL. It has been obtained ionic conductivity σ ∼ 10⁻³ S cm⁻¹ for the polymer electrolyte with 35 wt% of IL at 100 °C. The same order of magnitude for σ was obtained by molecular dynamics simulation of PEO/IL. This work demonstrates consistency between experimental and theoretical results for polymer electrolytes containing ionic liquids.     

Fabrication,antistatic ability,thermal properties,and morphology of a SPE‐based antistatic HIPS composite

Permanently antistatic composites composed of high impact polystyrene (HIPS) and LiClO₄ doped thermoplastic polyurethane/poly(ethylene oxide) (TPU/PEO) solid‐polymer‐electrolyte (SPE) were successfully prepared in a Haake torque rheometer. The HIPS/SPE composites with different ionic conductivities could be fabricated by a normal thermoplastic processing method instead of the conventional solvent‐based casting technique used in SPE. Studies of the rheological and conductive properties of the composites indicated that the fusion time of the composites increased with the PEO content. The surface resistivity of the composites was below 10¹⁰ ohm sq^?1 orders of magnitude, and able to satisfy the requirement of the antistatic packaging field when the PEO content reached 4 phr. The addition of PEO to the composites was helpful for enhancing the conductivity of the HIPS/SPE composites. Thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), tensile tests, and scanning electron microscope (SEM) were used to investigate the thermal, mechanical properties, and morphology of the composites, respectively. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

聚氧化乙烯-蒙脱土复合聚合物电解质室温电导率的研究

采用溶液浇铸法对蒙脱土与聚氧乙烯、LiClO4进行复合制备了聚合物电解质膜。用X射线衍射对蒙脱土及电解质膜进行了结构表征。采用交流阻抗法对复合型电解质膜的离子电导率进行了测试。结果表明：一定量的蒙脱土可以使（PEO）16LiClO4的离子电导率提高几倍。蒙脱土对基体离子电导率提高程度的不同取决于蒙脱土的含量。