Critical conditions for onset of mould growth under varying climate conditions

A performance-based service life design format based on climatic exposure on one hand and “resistance” of materials against mould growth on the other hand, is presented in this paper. A limit state for onset of mould growth is defined as the occurrence of traces of mould observed by microscopy. A dose–response model is proposed by which onset of mould growth can be predicted for an arbitrary climate history of combined relative humidity ? and temperature T. The model is calibrated and verified against a comprehensive set of experimental data published by Viitanen et al. [Viitanen H, Ritschkoff A-C. Mould growth in pine and spruce sapwood in relation to air humidity and temperature. Uppsala: Swedish University of Agricultural Sciences, Department of Forest Products; 1991. Report No. 221, 49 p.; Viitanen H. Modelling the time factor in the development of mould fungi – effect of critical humidity and temperature conditions in pine and spruce sapwood. Holzforschung 1997;51(1):6–14; Viitanen H. Modelling the time factor in the development of brown rot decay in pine and spruce sapwood – the effect of critical humidity and temperature conditions. Holzforschung 1997;51(2):99–106; Viitanen H, Bjurman J. Mould growth on wood under fluctuating humidity conditions. Material und Organismen 1995;29(1):27–46] describing mould development on spruce and pine sapwood as a function of climatic exposure. The model is applied to predict time to onset of mould growth under natural outdoor climate (under shelter) as well as mould development in building attics and in crawl space foundations. The predicted response shows reasonable agreement with experimental observations and proven experience, although biological processes of this type display great variability. The results show that a generally applicable, quantitative model can be used as a powerful tool for moisture safe design in practice. The model is designed to facilitate continuous improvement of prediction capability by further laboratory testing of various materials under specified climate conditions. In combination with currently available building physics software the model is suitable for moisture safe design of wood-based components in the building envelope.     

Titanium dioxide coated cementitious materials for air purifying purposes: Preparation,characterization and toluene removal potential

This work presents promising results for air purification by heterogeneous photocatalysis on new titanium dioxide loaded cementitious materials. A set of eight concretes and plasters is enriched with TiO₂ photocatalyst by dip-coating and/or sol–gel methods.     

Identifying the microbial communities and operational conditions for optimized wastewater treatment in microbial fuel cells

Microbial fuel cells (MFCs) are devices that exploit microorganisms as “biocatalysts” to recover energy from organic matter in the form of electricity. MFCs have been explored as possible energy neutral wastewater treatment systems; however, fundamental knowledge is still required about how MFC-associated microbial communities are affected by different operational conditions and can be optimized for accelerated wastewater treatment rates. In this study, we explored how electricity-generating microbial biofilms were established at MFC anodes and responded to three different operational conditions during wastewater treatment: 1) MFC operation using a 750 Ω external resistor (0.3 mA current production); 2) set-potential (SP) operation with the anode electrode potentiostatically controlled to +100 mV vs SHE (4.0 mA current production); and 3) open circuit (OC) operation (zero current generation). For all reactors, primary clarifier effluent collected from a municipal wastewater plant was used as the sole carbon and microbial source. Batch operation demonstrated nearly complete organic matter consumption after a residence time of 8–12 days for the MFC condition, 4–6 days for the SP condition, and 15–20 days for the OC condition. These results indicate that higher current generation accelerates organic matter degradation during MFC wastewater treatment. The microbial community analysis was conducted for the three reactors using 16S rRNA gene sequencing. Although the inoculated wastewater was dominated by members of Epsilonproteobacteria, Gammaproteobacteria, and Bacteroidetes species, the electricity-generating biofilms in MFC and SP reactors were dominated by Deltaproteobacteria and Bacteroidetes. Within Deltaproteobacteria, phylotypes classified to family Desulfobulbaceae and Geobacteraceae increased significantly under the SP condition with higher current generation; however those phylotypes were not found in the OC reactor. These analyses suggest that species related to family Desulfobulbaceae and Geobacteraceae are correlated with the electricity generation in the biofilm and may be key players for optimizing wastewater treatment rates and energy recovery in applied MFC systems.     

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.     

Water movement in porous building materials—II. Hydraulic suction and sorptivity of brick and other masonry materials

Philip's sorptivity parameter (S) is discussed in the context of porous building materials. Experimental sorptivity values are reported for a variety of building stones, bricks, mortars and plasters. Data on the temperature dependence of the sorptivity and absorption of organic liquids are included.     

Mass occurrence of Penicillium corylophilum in crawl spaces, south Sweden

Buildings with crawl space foundations are looked upon as high-risk constructions with respect to mould growth, especially on the blind floor. This mould growth can be extensive and cover several square meters of the blind floor with potential health risks as a consequence.Mould occurrence and mould species diversity were investigated in a large small-house area in the south of Sweden, comprising 212 buildings. The crawl spaces were inspected and samples from the blind floor were taken. The relative humidity was measured and reached 80–100% for several consecutive months. Subsets of the samples were cultured and the fungi isolated were further analyzed by sequencing of the Internal Transcribed Spacer (ITS) region of nuclear ribosomal Deoxyribo Nucleic Acid (DNA). The results were compared with results from other, relevant studies and confirm that Penicillium corylophilum is the completely dominating mould species in crawl spaces. The occurrences could not be explained as accidental since the extensive occurrence in many dwellings had developed over several years.     

Influence of paints on drying and salt distribution processes in porous building materials

Paints are widely used as finishing coats on all kinds of buildings. Aiming at a better understanding of how paints influence salt decay processes, experiments were performed on painted and unpainted specimens: (a) crystallization tests on specimens composed of a plaster on brick substrate; (b) drying experiments on stone specimens, monitored by means of a two-dimensional magnetic resonance imaging technique. The results of these experiments suggest that: (i) paints tend to increase the presence of moisture and salt deposition on or close to the surface of walls; (ii) the salt-accumulation behaviour and related features of different plasters/renders may be differently affected by paint layers.     

围护结构霉菌种类识别及生长风险研究

围护结构霉菌生长不仅会影响围护结构的热工性能,还会危害室内空气质量和人员健康.以上海市某居民小区为研究对象,通过现场采集和DNA高通量测序,对围护结构中的霉菌种类进行了识别.基于菌种识别结果,选择文献中相应菌属的培养数据,建立了用于霉菌生长风险预测的等值线模型.基于最佳温度下霉菌生长速率和相对湿度的函数关系式对该模型进...     

In-situ identification of iron electrocoagulation speciation and application for natural organic matter (NOM) removal

In this work, iron speciation in electrocoagulation (EC) was studied to determine the impact of operating parameters on natural organic matter (NOM) removal from natural water. Two electrochemical EC parameters, current density (i) and charge loading rate (CLR), were investigated. Variation of these parameters led to a near unity current efficiency (φ = 0.957 ± 0.03), at any combination of i in a range of 1–25 mA/cm² and CLR in a range of 12–300 C/L/min. Higher i and CLR led to a higher bulk pH and limited the amount of dissolved oxygen (DO) reduced at the cathode surface due to mass transfer limitations. A low i (1 mA/cm²) and intermediate CLR (60 C/L/min) resulted in low bulk DO (<2.5 mg/L), where green rust (GR) was identified by in-situ Raman spectroscopy as the primary crystalline electrochemical product. Longer electrolysis times at higher i led to magnetite (Fe₃O₄) formation. Both higher (300 C/L/min) and lower (12 C/L/min) CLR values led to increased DO and/or increased pH, with lepidocrocite (γ-FeOOH) as the only crystalline species observed. The NOM removal of the three identified species was compared, with conditions leading to GR formation showing the greatest dissolved organic carbon removal, and highest removal of the low apparent molecular weight (<550 Da) chromophoric NOM fraction, determined by high performance size exclusion chromatography.     

Investigation of timber harvesting impacts on herbaceous cover,forest floor and surface soil properties on skid road in an oak (Quercus petrea L.) stand

In this study, we investigated the timber harvesting effects on some soil properties (sand, silt, clay, pH, electrical conductivity, fine soil <2 mm, coarse soil >2 mm, root mass, organic carbon, moisture equivalent, total porosity, bulk density, moisture and compaction) at soil depths (0–5 and 5–10 cm), herbaceous cover and forest floor (unit mass, organic matter and moisture) on skid road of an oak (Quercus petrea L.) stand in Istanbul Belgrad Forest of Turkey.     

Influence of environmental conditions on production of volatiles by Trichoderma atroviride in relation with the sick building syndrome

A Trichoderma atroviride strain was isolated from a water-damaged office and the production of microbial volatile organic compounds (MVOCs) was investigated by means of headspace solid phase microextraction GC–MS. Different growth conditions (substrate, temperature, relative humidity) were selected, resembling indoor parameters, to elucidate a possible relationship between MVOCs, produced by Trichoderma atroviride, and the Sick Building Syndrome. In general, the range of MVOCs and the emitted quantities were larger on malt extract agar (MEA) than on wallpaper and plasterboard. Particular attention was dedicated to the volatile marker 6-pentyl-2-pyrone, a compound produced in high quantities on MEA, and its mucosal irritation potency was shown in a slug mucosal irritation assay. Some compounds characteristic for growth on specific building materials were detected, e.g. 2-ethylcyclopentanone, menthone, iso-menthone and trans-p-menth-2-en-7-ol on plasterboard and 4-heptanone and 1-octen-3-ol on wallpaper. Relative humidity and substrate had a more important effect on MVOC production than temperature.     

Artificial vs natural Stachybotrys infestation—Comparison of mycotoxin production on various building materials

The genus Stachybotrys belongs to filamentous fungi found in indoor environment, mostly on cellulose-rich substrates after water-damage. The major purpose of this study was to investigate the influence of different building materials in case of mold infestation on the mycotoxin production of Stachybotrys species. Fifteen Stachybotrys mycotoxins including satratoxins, phenylspirodrimanes, and recently discovered stachybotrychromenes were in the focus of the investigations. Artificial and natural infestations were compared to determine whether environmental factors, for example, time of growth, temperature, humidity, and material additives have an influence on the observed mycotoxin profiles. It turned out that mycotoxin profiles from Stachybotrys spp. on building materials can be influenced by cellulose, paints, and paste of the materials. The total toxin levels of artificially and naturally contaminated gypsum board samples ranged up to 30 µg/cm², whereas wallpaper samples showed total toxin levels in the range of 20-66 µg/cm². A naturally infested sample disclosed the conversion of the dialdehyde components to the corresponding lactone isomers under the influence of light.     

Determination of iodide,iodate and organo-iodine in waters with a new total organic iodine measurement approach

The dissolved iodine species that dominate aquatic systems are iodide, iodate and organo-iodine. These species may undergo transformation to one another and thus affect the formation of iodinated disinfection byproducts during disinfection of drinking waters or wastewater effluents. In this study, a fast, sensitive and accurate method for determining these iodine species in waters was developed by derivatizing iodide and iodate to organic iodine and measuring organic iodine with a total organic iodine (TOI) measurement approach. Within this method, organo-iodine was determined directly by TOI measurement; iodide was oxidized by monochloramine to hypoiodous acid and then hypoiodous acid reacted with phenol to form organic iodine, which was determined by TOI measurement; iodate was reduced by ascorbic acid to iodide and then determined as iodide. The quantitation limit of organo-iodine or sum of organo-iodine and iodide or sum of organo-iodine, iodide and iodate was 5 μg/L as I for a 40 mL water sample (or 2.5 μg/L as I for an 80 mL water sample, or 1.25 μg/L as I for a 160 mL water sample). This method was successfully applied to the determination of iodide, iodate and organo-iodine in a variety of water samples, including tap water, seawater, urine and wastewater. The recoveries of iodide, iodate and organo-iodine were 91–109%, 90–108% and 91–108%, respectively. The concentrations and distributions of iodine species in different water samples were obtained and compared.     

Alternating anoxic feast/aerobic famine condition for improving granular sludge formation in sequencing batch airlift reactor at reduced aeration rate

In this study the influence of a pre-anoxic feast period on granular sludge formation in a sequencing batch airlift reactor is evaluated. Whereas a purely aerobic SBR was operated as a reference (reactor R2), another reactor (R1) was run with a reduced aeration rate and an alternating anoxic-aerobic cycle reinforced by nitrate feeding. The presence of pre-anoxic phase clearly improved the densification of aggregates and allowed granular sludge formation at reduced air flow rate (superficial air velocity (SAV) = 0.63 cm s⁻¹). A low sludge volume index (SVI₃₀ = 45 mL g⁻¹) and a high MLSS concentration (9–10 g L⁻¹) were obtained in the anoxic/aerobic system compared to more conventional results for the aerobic reactor. A granular sludge was observed in the anoxic/aerobic system whilst only flocs were observed in the aerobic reference even when operated at a high aeration rate (SAV = 2.83 cm s⁻¹). Nitrification was maintained efficiently in the anoxic/aerobic system even when organic loading rate (OLR) was increased up to 2.8 kg COD m⁻³ d⁻¹. In the contrary nitrification was unstable in the aerobic system and dropped at high OLR due to competition between autotrophic and heterotrophic growth. The presence of a pre-anoxic period positively affected granulation process via different mechanisms: enhancing heterotrophic growth/storage deeper in the internal anoxic layer of granule, reducing the competition between autotrophic and heterotrophic growth. These processes help to develop dense granular sludge at a moderate aeration rate. This tends to confirm that oxygen transfer is the most limiting factor for granulation at reduced aeration. Hence the use of an alternative electron acceptor (nitrate or nitrite) should be encouraged during feast period for reducing energy demand of the granular sludge process.     

Exposure to Volatile Organic Compounds of Microbial Origin (MVOC) during Indoor Application of Water-based Paints

The market for water-based paints (WBP) is growing, and these paints are favoured due to their low emission of volatile organic compounds (VOC). Because of the risk for microbial growth, biocides are usually added to WBP. Our study aimed to measure exposure to VOCs potentially of microbial origin (MVOC), during indoor application of typical Scandinavian WBP. Low concentrations of three MVOCs, 3-methyl-furan, 1-octen-3-ol, and 2-octen-1-ol, were detected during 5 out of 20 painting operations (25%). Mean exposures to MVOC and TVOC were 0.15 and 5000 μg/m³, respectively. No relation between MVOC and TVOC was observed. The highest exposure to MVOC was measured from an ecological paint, claimed to be low in VOCs and chemical additives. The results suggest that microbial growth in WBP may occur, and that measurements of MVOCs could be used as a means of quality control for WBP. The use of biocides in paint should be guided by the principle of a balance between the risk of contact allergies or other possible health hazards from the biocides, and the risk of microbial growth. If microbial growth occurs in paint, it may cause both unpleasant odor and potential health hazards for house painters and dwellers.     

Fossil organic carbon in wastewater and its fate in treatment plants

This study reports the presence of fossil organic carbon in wastewater and its fate in wastewater treatment plants. The findings pinpoint the inaccuracy of current greenhouse gas accounting guidelines which defines all organic carbon in wastewater to be of biogenic origin. Stable and radiocarbon isotopes (¹³C and ¹⁴C) were measured throughout the process train in four municipal wastewater treatment plants equipped with secondary activated sludge treatment. Isotopic mass balance analyses indicate that 4–14% of influent total organic carbon (TOC) is of fossil origin with concentrations between 6 and 35 mg/L; 88–98% of this is removed from the wastewater. The TOC mass balance analysis suggests that 39–65% of the fossil organic carbon from the influent is incorporated into the activated sludge through adsorption or from cell assimilation while 29–50% is likely transformed to carbon dioxide (CO₂) during secondary treatment. The fossil organic carbon fraction in the sludge undergoes further biodegradation during anaerobic digestion with a 12% decrease in mass. 1.4–6.3% of the influent TOC consists of both biogenic and fossil carbon is estimated to be emitted as fossil CO₂ from activated sludge treatment alone. The results suggest that current greenhouse gas accounting guidelines, which assume that all CO₂ emission from wastewater is biogenic may lead to underestimation of emissions.     

Growth-Phase-Related Production of Potential Volatile-Organic Tracer Compounds by Moulds on Wood

Abstract The growth-dependent production of known and new potential tracer compounds for moulds of the genus Penicillium on pine wood is shown. The analytical method used involves diffusive sampling by an adsorbent tube (Tenax-TA), thermal desorption, gas chromatography and a mass selective detector. Mass spectra of identified and unidentified potential tracer compounds are presented. Identified compounds are l-Octene-3-ol, 2-Heptanone, 4-Allylanisole and 3-Methyl-l-butanol. In addition, several other compounds were tentatively identified or recognized in different samples by their retention time and mass spectra. The microbiologically produced volatile organic compounds (MVOC) are produced during different time periods of the mould growth cycle. The impact of these results on screening measurements for houses with mould problems is discussed together with the applicability and need for new and more tracer compounds for mould growth in buildings.     

Impact of paint and wall-paper on mould growth on plasterboards and aluminum

Biocide-free and biocide-treated plasterboards as well as aluminum plate as a reference material normally considered as being insensitive to mould growth have been used as substrate to check the influence of different common wall coverings, i.e. paints and wall papers, on fungal growth. The results described in this paper show that any non-biodegradable material (such as aluminum) can become a substrate to fungal infestation once painted or wall paper applied, depending on the type of paint or wall paper used. Moreover, a biodegradable material treated with a biocide (biocide-treated plasterboard) offers partial resistance to fungal growth at a biodegradable surface covering.     

Removal of arsenic from water: Effect of calcium ions on As(III) removal in the KMnO4–Fe(II) process

A novel KMnO₄–Fe(II) process was developed in this study for As(III) removal. The optimum As(III) removal was achieved at a permanganate dosage of 18.6 μM. At the optimum dosage of permanganate, the KMnO₄–Fe(II) process was much more efficient than the KMnO₄–Fe(III) process for As(III) removal by 15–38% at pH 5–9. The great difference in As(III) removal in these two processes was not ascribed to the uptake of arsenic by the MnO₂ formed in situ but to the different properties of conventional Fe(III) and the Fe(III) formed in situ. It was found that the presence of Ca²⁺ had limited effects on As(III) removal under acidic conditions but resulted in a significant increase in As(III) removal under neutral and alkaline conditions in the KMnO₄–Fe(II) process. Moreover, the effects of Ca²⁺ on As(III) removal in the KMnO₄–Fe(II) process were greater at lower permanganate dosage when Fe(II) was not completely oxidized by permanganate. This study revealed that the improvement of As(III) removal at pH 7–9 in the KMnO₄–Fe(II) process by Ca²⁺ was associated with three reasons: (1) the specific adsorption of Ca²⁺ increased the surface charge; (2) the formation of amorphous calcium carbonate and calcite precipitate that could co-precipitate arsenate; (3) the introduction of calcium resulted in more precipitated ferrous hydroxide or ferric hydroxide. On the other hand, the enhancement of arsenic removal by Ca²⁺ under acidic conditions was ascribed to the increase of Fe retained in the precipitate. FTIR tests demonstrated that As(III) was removed as arsenate by forming monodentate complex with Fe(III) formed in situ in the KMnO₄–Fe(II) process when KMnO₄ was applied at 18.6 μM. The strength of the “non-surface complexed” As–O bonds of the precipitated arsenate species was enhanced by the presence of Ca²⁺ and the complexation reactions of arsenate with Fe(III) formed in situ in the presence or absence of Ca²⁺ were proposed.     

Heterogeneous photocatalytic removal of toluene from air on building materials enriched with TiO2

This paper reports the potential of heterogeneous photocatalysis as an advanced oxidation technology for removal of toluene from air using TiO₂ as a photocatalyst in building materials. First, the photocatalytic activity of two types of TiO₂ containing building materials, i.e. roofing tiles and corrugated sheets, has been investigated at ambient conditions (T=25.0 °C; relative humidity RH=47%; toluene inlet concentration [TOL]_in=17–35 ppbv). Toluene removal efficiencies up to 63% were observed at a gas residence time (τ) of 17 s. Second, the effect of RH (1–77%), [TOL]_in (23–465 ppmv) and τ (17–115 s) on toluene removal has been systematically investigated using TiO₂ containing roofing tiles as photocatalytic building materials. Results revealed lower toluene removal efficiencies at higher RH and [TOL]_in, whereas a positive effect was observed with increased τ. Under optimal conditions, toluene removal efficiencies up to 78±2% and elimination rates higher than 100 mg h⁻¹ m⁻² roofing tile were obtained. A decline in photocatalytic activity by a factor of 2 was observed after operation at gas residence times shorter than 69 s and [TOL]_in higher than 76 ppmv. Washing the building materials with deionized water, simulating rainfall, could partially (i.e. by a factor 1.3) regenerate the catalyst activity.