反应堆压力容器下降环腔在有安全注入流动时的瞬态温度变化

在1／10的比例模型上完成了反应堆压力容器下降环腔在有安全注入流动时的瞬态温度变化。实验考察了有一回路流动和无一回路流动对瞬态温度变化的影响。实验证明：无一回路流动时，下降环腔内瞬态温度的变化速度和幅值随安全注入充速的增加而增加；有一回路流动时，下降环腔内瞬态温度的变化幅值比同安全注入流速时无一回路流动的变化幅值要小。     

承压热冲击下AP1000压力容器直接安注瞬态数值模拟研究

基于计算流体动力学(CFD)分析方法,采用流固共轭传热方式,对非能动堆芯冷却系统(PXS)的堆芯补水箱(CMT)热态功能试验、CMT注入同时自动减压系统(ADS)动作、蓄压安注箱(ACC)安注后CMT再注入以及常规余热排出系统运行等4种工况下反应堆压力容器(RPV)环腔内流动传热状态进行瞬态数值模拟,研究RPV壁面温度瞬态变化以及环腔下降段内流体的混合特性。结果表明:4种工况下直接安注(DVI)接管管嘴与RPV内壁面相交斜面处冷却水混合剧烈,冷段是否有流体注入环腔对其内流体温度分布变化影响巨大,且DVI接管管嘴局部区域将发生较大的温度变化。     

直接安注反应堆压力容器下降环腔内射流传热试验研究

失水事故工况 (LOCA)下反应堆下降环腔内的流动和传热研究 ,对反应堆压力容器 (RPV)的安全具有重要的意义。通过对一种直接安注的反应堆压力容器内流动和传热的研究 ,将流动分为横穿射流和冲击射流 ,比较了在两种射流下下降环腔内流动和传热的特点 ,分析了流速比和对流换热系数及温度的关系 ,当流速比在 1～ 1 0时 ,流动属于横穿射流 ,对流换热主要由环腔流速决定 ;流速比大于 1 0后 ,属于冲击射流 ,环腔内对流换热主要决定于安注流速 ,此时局部对流换热能力随安注流速的增加而增加     

承压热冲击下压水堆压力容器壁面换热特性的数值模拟研究

为了研究压水堆因安注冷水直接注入反应堆压力容器下降环腔而导致的承压热冲击（PTS）热工水力问题，基于1∶10比例模型，应用计算流体力学商用软件FLUENT5．4进行了紊流流动换热的数值模拟分析，同时进行了常压传热实验研究。针对下降环腔折算流速0．5m/s，安注流速10m/s的典型工况，研究了压力容器下降环腔的壁面换热特性。通过分析下降环腔内的流动及混合特性，从流动机理上解释了压力容器内壁上准重接触点附近换热强烈的现象，并指出壁面换热强弱与近壁流体紊流脉动动能密切相关，为热冲击分析提供参考。     

高压安注条件下冷管段和环腔流体混合特性的数值分析

压水堆高压安注条件下冷热流体混合会导致承压热冲击现象,影响压力容器的使用寿命。本文基于ROCOM实验装置的实验数据,使用CFD方法对高压安注条件下有密度差的冷热流体混合现象进行了模拟,并对模拟结果进行了验证与分析。结果表明,在冷管段和下降段环腔中流体混合的主导因素分别为强迫流动混合和浮升力驱动混合。在仅有1条冷管段注入的情况下,进入下腔室的流体会再次回流至环腔,从而对冷却剂的混合特性产生影响。     

PTS瞬态流动与换热数值模拟研究

为了研究压水堆因“直接安注”冷水注入压力容器下降环腔而导致的承压热冲击（PTS）热工水力问题,基于1:10比例模型,应用计算流体力学软件FLUENT5.4进行了紊流流动换热的数值模拟分析,同时进行了常压瞬态传热实验研究。针对下降环腔折算流速0.5 m/s,安注流速10m/s的典型工况,研究了安注水开启后下降环腔内的瞬态流动换热特性,数值模拟与实验结果吻合良好。考察了压力容器安注接管出口区环形焊缝区及堆芯段筒体中子强辐照区所承受的热冲击状况,基于稳态流动研究了下降环腔内流体混合特性及流动机理,为热冲击分析提供参考。     

华龙一号反应堆堆腔注水冷却系统设计与安全特性研究

华龙一号反应堆采用堆腔注水冷却系统作为严重亊故的关键缓解措施,通过压力容器外部冷却实现熔融物压力容器内滞留(IVR)。针对系统的安全特性开展了深入的研究论证,包括严重亊故序列分析、熔融物失效迁移行为研究、临界热流密度(CHF)试验以及基于CISER程序的热工有效性论证。结果表明,华龙一号堆腔注水冷却系统(CIS)具有足够安全裕量,在严重亊故下可保证压力容器的完整性。     

反应堆压力容器直接安注热分布特性研究

我国非能动系列压水堆将应急冷却系统冷却水的注入管道直接连接于压力容器上,与传统的冷管段安注不同,这种安注方式被称之为反应堆压力容器直接安注。本文以安注条件下的反应堆压力容器为研究对象,采用物理实验与数值分析结合的方法,对安注流体在压力容器表面形成的热分布形态进行研究。研究发现,不同于传统的主管道冷段斜接管安注方式,直接安注条件下安注流体在下降环腔中的分布形态接近于等腰三角形。以实验结果为基础,结合数值计算验证,发现了压力容器热分布角与流速比成正比关系,并进一步提出了安注流体分布计算模型,从而为反应堆安全设计提供参考。      

反应堆压力容器下降段水-蒸汽CCFL实验与模型研究

为探究反应堆压力容器下降段在喷放末期冷段安注过程中的水-蒸汽逆流特性,建立下降段逆向流动限制(CCFL)模型,开展了基于压力容器模化本体的下降段CCFL实验研究以及建模分析。通过实验研究获得了不同入口安注水流量、安注水过冷度、堆芯蒸汽流量等条件下的下降段环腔内的安注特性数据,并基于实验数据进行了CCFL建模分析。结果表明,开始发生CCFL的蒸汽无量纲流速与入口安注水无量纲流速呈现正相关,基于无量纲流速建立的模型斜率与入口安注水无量纲流速呈现高度指数关联。本文建立了适用于从不发生CCFL至不完全CCFL,再到完全CCFL的下降段水-蒸汽气液逆流全过程预测模型。     

反应堆直接安注结构热工影响分析

建立了反应堆压力容器直接安注的实验模型,进行传热和流动实验。实验对比研究了文丘里管和直管两种不同安注管结构下压力容器不同区域的流动混合、传热系数以及相应的温度变化,并通过可视化实验对比验证了不同安注模型的流场,对不同结构下安注管的阻力特性进行了分析。研究结果表明,不同安注管在流动阻力上存在较大差异。研究结果为反应堆压力容器安注管的设计选择提供了重要依据。     

Preparation of Zn/TiO2 powder and its photocatalytic performance for oxidation of P-nitrophenol

Zn-doped TiO2 catalysts were prepared using a sol-gel method and characterized by XPS,UV-Vis, BET, XRD in this study. Under the irradiation of simulant sunlight, the photocatalytic activity for the degradation of p-nitrophenol was studied too. After irradiation for 2.5 h, the degradation percentage of p-nitrophenol could rise to more than 80 %. The results showed that the spectrum absorption band edge of Zn/TiO2 powder does not broaden obviously comparing with pure TiO2 powder. Zinc exists as Zn （11）. When calcined at 973 K, there is a new phase as ZnTiO3 in Zn/TiO2 catalyst. The order of photocatalytic activity of Zn/TiO2 catalysts calcined at different temperatures for p-nitrophenol is 773 K 〉 673 K 〉 873 K 〉 573 K 〉 973 K and the photocatalytic activity of Zn/TiO2 catalyst calcined at 773 K is better than TiO2 catalysts heated at the same temperature, and outclasses that of commercial TiO2 catalyst. It also showed that the photocatalytic degradation of p-nitrophenol follows first-order kinetics under the irradiation of simulant sunlight.     

Current status of radiation therapy for prostate cancer

Radiotherapy for the treatment of prostate cancer has been extensively explored in the past. Along with the comprehensive understanding of the biology of prostate cancer and rapid advances in terms of technology, the out- come of treatment for the patients with prostate cancer has improved. The authors review radiotherapy as the primary treatment for the disease, with particular emphasis on the technological advances from both the radiobiological and radiophysics aspects. Nonconventional fractionated irradiation like hyper- or hypo-fractionation has been imple- mented in the clinic, the final results still need to be confirmed in the future. Technological advances like IMRT, IGRT, in the last two decades have significantly improved the delivery of external radiotherapy to the prostate. This has re- sulted in an overall increase in the total dose that can be safely delivered to the prostate, which has led to modest im- provements in the biochemical outcome. However, establishing the standard therapy for prostate cancer remains con- troversial. It is hoped that the next decades will bring continued advances in the development of biologicals that will further improve current clinical outcomes.     

水平管内含空气蒸汽强制对流冷凝换热模型研究

为研究含空气蒸汽在水平管内强制对流冷凝换热特性,基于对传热传质过程的分析,建立了管内为环状流与波状流条件下的流动冷凝换热模型。从潜热、显热和液膜3个环节对整个换热过程进行建模,最终得到计算局部冷凝换热系数的理论关系式。模型预测结果与实验数据的对比表明,二者相对偏差在±20%以内,验证了该换热模型的准确性与适用性。通过进一步的研究发现：从换热管入口至出口,随着冷凝的进行,管内换热主要热阻由液膜热阻向气液界面的凝结热阻转变;主流气体对流换热过程基本可忽略。     

Investigations on landmine detection by BF3 detector

Experiments were carried out to investigate the possible use of neutron backscattering for the detection of polyethylene (PE) sample buried in the soil. In detection of landmine by neutrons, the neutron detector and its shield play an important role. In this paper, the effects of graphite, heavy water, polyethylene and boric acid moderators on the flux of back scattered neutrons were investigated. We have also experimentally verified the effect of BF3 detector shield and obtained good agreement with theory.     

Web Services interface of SSRF archive data analysis system

Accelerator database stores various static parameters and real-time data of accelerator. SSRF (Shanghai Synchrotron Radiation Facility) adopts relational database to save the data. We developed a data retrieval system based on XML Web Services for accessing the archive data. It includes a bottom layer interface and an interface applicable for accelerator physics. Client samples exemplifying how to consume the interface are given. The users can browse, retrieve and plot data by the client samples. Also, we give a method to test its stability. The test result and performance are described.     

Assessment of radioactivity levels in some oil samples from the western desert, Egypt

Distributions of natural gamma-emitting radionuclides were determined in 93 oil samples collected from some petroleum fields in the western desert of Egypt. The radioisotope activities in the area under investigation lay in the range of (21 ± 4) to (38 ± 13) Bq?L-1 for 226Ra, (9 ± 2) to (15 ± 5) Bq?L-1 for 232Th, and (154 ± 28) to (303 ± 54) Bq?L-1 for 40K. The mean values were 27, 12, and 201 Bq?L-1, respectively. Among oils, variations in radionuclide ac- tivities could be on account of differences in TDS, HCO3, and Ba, with high or low pH. In this environment, oil prop- erties differently affected the mobilization of natural radionuclides. The range of 226Ra variation had been compared with available data from other countries. The calculated absorbed dose rate ranged from 22.33 to 32.66 nGy?h-1 in lo- cation (B) and (E) respectively, which was less than the accepted value.     

Preparation and properties of 117m Sn(IV)-TTHMP in in-vitro and in small animals

In this work,TTHMP was synthesized and labelled with 117m Sn.The preparation conditions,stability and lipophilicity of 117m Sn(IV)-TTHMP were investigated.Biodistribution of the complex in rabbits and mice was studied.It was found that the quantity of TTHMP and pH value of the prepararion solution had vital effects on the labeling yield of 117m Sn(IV)-TTHMP.It was also found that 117m Sn(IV)-TTHMP was hydrophilic and stable at room temperature and 37℃ in open air 117m Sn(IV)-TTHMP showed unexpectedly high bone uptake and bone-to-blood ratio in the animals.This made it potentially useful as an reagent for skeletal scintigraphy and radiotherapy of bone tumors.     

The role of AGFA high-energy CR in the calibration and quality control of multileaf collimators （MLC）

Linear accelerators equipped with multileaf collimators （MLC） are becoming more common and are widely used in the intensity-modulated radiotherapy （IMRT）. There is an imperative need to ensure the commissioning specification of the linear accelerators for the sake of quality assurance （QA） and quality control （QC）. This paper is aimed to investigate the role of AGFA high-energy CR （Computed Radiography） in calibrating dynamic multileaf collimators and evaluating the accuracy of the leaf position. The result shows that AGFA high-energy CR can easily and conveniently be used to calibrate MLC and verify its position. Hence, the application of AGFA high-energy CR is proved to be an accurate and time-saving method for routine MLC QC, especially when MLC calibration adjustments are required.     

微型X射线管空气比释动能和能谱的测量

为研究微型X射线管的特性,通过电离室测量光管出射口30 cm远处的空气比释动能,使用高纯锗探测器分别测量了Ag过滤和Cu过滤下的X射线能谱。结果表明,空气比释动能随电流的增加有线性增加的趋势,能谱图明显的观察到银的两个特征X射线。完成了微型X射线管空气比释动能和能谱的测量方法以及实验测量的工作,为微型x射线管下辐射质的建立提够了条件基础。     

Gamma-ray attenuation technique for measuring void fraction in horizontal gas-liquid two-phase flow

The measurement of void fraction is of importance to the oil industry and chemical industry. In this article, the principle and mathematical method of determining the void fraction of horizontal gas-liquid flow by using a single-energy γ-ray system is described. The γ-ray source is the radioactive isotope of 241Am with γ-ray energy of 59.5 keV. The time-averaged value of the void fraction in a 50.0-mm i.d. transparent horizontal pipeline is measured under various combinations of the liquid flow and gas flow. It is found that increasing the gas flow rate at a fixed liquid flow rate would increase the void fraction. Test data are compared with the predictions of the correlations and a good agreement is found. The result shows that the designed γ-ray system can be used for measuring the void fraction in a horizontal gas-liquid two-phase flow with high accuracy.