A non-classical third-order shear deformation plate model based on a modified couple stress theory

A non-classical third-order shear deformation plate model is developed using a modified couple stress theory and Hamilton’s principle. The equations of motion and boundary conditions are simultaneously obtained through a variational formulation. This newly developed plate model contains one material length scale parameter and can capture both the size effect and the quadratic variation of shear strains and shear stresses along the plate thickness direction. It is shown that the new third-order shear deformation plate model recovers the non-classical Reddy-Levinson beam model and Mindlin plate model based on the modified couple stress theory as special cases. Also, the current non-classical plate model reduces to the classical elasticity-based third-order shear deformation plate model when the material length scale parameter is taken to be zero. To illustrate the new model, analytical solutions for the static bending and free vibration problems of a simply supported plate are obtained by directly applying the general forms of the governing equations and boundary conditions of the model. The numerical results show that the deflection and rotations predicted by the new plate model are smaller than those predicted by its classical elasticity-based counterpart, while the natural frequency of the plate predicted by the former is higher than that by the latter. It is further seen that the differences between the two sets of predicted values are significant when the plate thickness is small, but they are diminishing with increasing plate thickness.     

A model of composite laminated Reddy plate based on new modified couple stress theory

Based on new modified couple stress theory a model for composite laminated Reddy plate is developed in first time. In this theory a new curvature tensor is defined for establishing the constitutive relations of laminated plate. The characterization of anisotropy is incorporated into higher-order laminated plate theories based on the modified couple stress theory by Yang et al. in 2002. The form of new curvature tensor is asymmetric, however it can result in same as the symmetric curvature tensor in the isotropic elasticity. The present model of thick plate can be viewed as a simplified couple stress theory in engineering mechanics. Moreover, a more simplified model for cross-ply composite laminated Reddy plate of couple stress theory with one material’s length constant is used to demonstrate the scale effects. Numerical results show that the present plate model can capture the scale effects of microstructure. Additionally, the present model of thick plate model can be degenerated to the model of composite cross-ply laminated Kirchhoff plate and Mindlin plate of couple stress theory.     

A nonlinear Timoshenko beam formulation based on the modified couple stress theory

This paper presents a nonlinear size-dependent Timoshenko beam model based on the modified couple stress theory, a non-classical continuum theory capable of capturing the size effects. The nonlinear behavior of the new model is due to the present of induced mid-plane stretching, a prevalent phenomenon in beams with two immovable supports. The Hamilton principle is employed to determine the governing partial differential equations as well as the boundary conditions. A hinged–hinged beam is chosen as an example to delineate the nonlinear size-dependent static and free-vibration behaviors of the derived formulation. The solution for the static bending is obtained numerically. The solution for the free-vibration is presented analytically utilizing the method of multiple scales, one of the perturbation techniques.     

基于新修正偶应力理论的斜交铺设层合Kirchhoff板模型与尺度效应

基于新修正偶应力理论, 建立了只含有1个尺度参数的复合材料斜交铺设层合Kirchhoff板模型, 并分析了铺设角对尺度效应的影响。采用虚功原理推导了任意铺设角的层合Kirchhoff板的弯曲方程和边界条件。通过新模型给出了四边简支反对称角铺设微尺度层合Kirchhoff板的解析解。结果表明:细观尺度各向异性层合板的尺度效应并不仅仅受其几何尺寸的影响, 还受铺设角的影响;铺设角对尺度效应可能产生非常显著的影响。      

Geometrically nonlinear micro-plate formulation based on the modified couple stress theory

The couple stress theory is a non-classical continuum theory which is capable to capture size effects in small-scale structures. This property makes it appropriate for modeling the structures in micron and sub-micron scales. The purpose of this paper is the derivation of the governing motion equations and boundary conditions for the geometrically nonlinear micro-plates with arbitrary shapes based on the modified version of the couple stress theory. The consistent boundary conditions are provided at smooth parts of the plate periphery and also at the sharp corners of the periphery using variational approach.     

A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation

This communication discusses a 4-node plate bending element for linear elastic analysis which is obtained, as a special case, from a general nonlinear continuum mechanics based 4-node shell element formulation. The formulation of the plate element is presented and the results of various example solutions are given that yield insight into the predictive capability of the plate (and shell) element.     

Size effect on dynamic stability of functionally graded microbeams based on a modified couple stress theory

Dynamic stability of microbeams made of functionally graded materials (FGMs) is investigated in this paper based on the modified couple stress theory and Timoshenko beam theory. This non-classical Timoshenko beam model contains a material length scale parameter and can interpret the size effect. The material properties of FGM microbeams are assumed to vary in the thickness direction and are estimated though Mori–Tanaka homogenization technique. The higher-order governing equations and boundary conditions are derived by using the Hamilton’s principle. The differential quadrature (DQ) method is employed to convert the governing differential equations into a linear system of Mathieu–Hill equations from which the boundary points on the unstable regions are determined by Bolotin’s method. Free vibration and static buckling are also discussed as subset problems. A parametric study is conducted to investigate the influences of the length scale parameter, gradient index and length-to-thickness ratio on the dynamic stability characteristics of FGM microbeams with hinged–hinged and clamped–clamped end supports. Results show that the size effect on the dynamic stability characteristics is significant only when the thickness of beam has a similar value to the material length scale parameter.     

基于一种新修正偶应力理论的平面正交各向异性功能梯度梁静弯曲模型及尺度效应

基于一种新修正偶应力理论建立了微尺度平面正交各向异性功能梯度梁模型。模型中包含两个材料尺度参数,因此能够分别描述在两个正交方向上由尺度效应带来的不同大小弯曲刚度增强。基于最小势能原理推导了平衡方程和边界条件,并以自由端受集中载荷作用的悬臂梁为例给出了弯曲问题的解析解。该梁模型的控制方程以及解的形式和经典梁模型是一致的,只是在刚度项中增加了一项和尺度效应有关的项。算例结果表明:采用本文模型所预测的梁挠度总是小于经典理论的结果,即捕捉到了尺度效应。尺度效应会随着梁几何尺寸的减小而增大,并在梁的几何尺寸远大于尺度参数时逐渐消失。     

Free vibration of magneto-electro-elastic nanobeams based on modified couple stress theory in thermal environment

In this paper, the size-dependent free vibration of magneto-electro-elastic (MEE) nanobeams in thermal environment is investigated. Size effects are taken into account using the modified couple stress theory, which is capable of accounting for higher-order electromechanical coupling, and the equations are developed on the basis of Euler–Bernoulli beam model and using von Karman nonlinear strain. The vibration of hinged–hinged nanobeams is investigated by way of example. Effects of various parameters such as temperature, thickness, and length on natural frequencies are demonstrated, and it is indicated that increased length and decreased thickness lead to decreased nanobeam natural frequencies.     

Thermoelastic damping in a micro-beam resonator using modified couple stress theory

In this paper, analytical expressions for the quality factor (QF) of thermoelastic damping (TED) applying modified couple stress theory (MCST) are presented for plane stress and strain conditions. For gold and nickel micro-beam resonators, which have a considerable length-scale parameter as case studies, the effect of the length-scale parameter on the QF of TED has been discussed in details. Results for the QF of TED show that when the beam thickness is close to the length-scale parameter of the material, the MCST diverges from the classical theory; otherwise, the two theories converge to each other. Also critical thickness variation due to applying MCST is studied.     

Dynamic analysis of an embedded microbeam carrying a moving microparticle based on the modified couple stress theory

In this study, analytical and numerical solution procedures are proposed for vibration of an embedded microbeam under action of a moving microparticle based on the modified couple stress theory (MCST) within the framework of Euler–Bernoulli beam theory. The governing equation and the related boundary conditions are derived by using Hamilton’s principle. The closed form solution of the transverse deflections of the embedded microbeam is obtained using the finite Fourier sine transformation. In the numerical solution, the dynamic deflections are computed by using the Lagrange’s equations in conjunction with the direct integration method of Newmark. The static deflections are also obtained analytically. A detailed parametric study is conducted to study the influences of the material length scale parameter, the Poisson’s ratio, the velocity of the microparticle and the elastic medium constant as well as the solution procedures on the dynamic responses of the microbeam. For comparison purpose, static deflections and free vibration frequencies of the microbeam are obtained and compared with previously published studies. Good agreement is observed. The results show that the above mentioned effects play an important role on the dynamic behavior of the microbeam.     

A model of composite laminated Reddy plate of the global-local theory based on new modified couple-stress theory

In this article, based on the global-local theory, a model for a composite laminated Reddy plate of new modified couple-stress theory is developed for the first time. This model satisfies free surface conditions and the geometric and stresses continuity conditions at interfaces. Differing from existing modified couple-stress theory, an anisotropic constitutive relation is suggested. There is only one micro material characteristic length constant in each layer of the composite laminated plate. Principle of virtual work is employed to derive the equilibrium equations and the corresponding boundary conditions. With the example of a cross-ply simple-supported Reddy plate subjected to the bending load q₀ = sin?(πx/L)sin?(πy/L), the transverse shear stresses at interfaces are addressed. Additionally, the numerical results show that the present plate model can capture the scale effect, especially the scale effect of the transverse shear stresses at interfaces of the composite laminated plate.     

基于新修正偶应力的增强型Reddy层合板热尺度效应分析

基于新修正偶应力理论,提出复合材料增强型Reddy层合板热尺度效应模型.该模型只含有一个材料长度参数l,同时将首次引入厚度方向的旋转变量.通过虚功原理推导出平衡方程,并且利用纳维方法,分析热载作用下细观复合材料层合/夹层方板的位移和应力.数值计算表明:该模型能够很好地捕捉板的热尺度效应,随着材料长度参数增大,板的热尺度...     

On the stability of a microbeam conveying fluid considering modified couple stress theory

In this paper, the size-dependent vibrational behavior of a microbeam conveying fluid was investigated using the Modified Couple Stress Theory. For cantilever and clamped-clamped microbeams, the small amplitude vibration equation of the micro-beams was solved using a Galerkin based reduced order model and the effects of material length-scale parameter on its natural frequencies were evaluated. It was found that for the both cantilever and clamped-clamped conditions, the critical fluid velocities predicted by the modified couple stress theory are higher than those predicted by the classical beam theory. In addition, the differences between the eigen-frequencies and the critical fluid velocities predicted by the modified couple stress theory and classical beam theory depends on the ratio of the material length-scale parameter to the beam height. In addition an unexpected result in the difference between the first eigen-frequency of the cantilever micro-beam obtained by the classical and the modified couple stress theory has been achieved.     

The investigation of the nonlocal longitudinal stress waves with modified couple stress theory

In the present work, the propagation of longitudinal stress waves is investigated using a modified couple stress theory. The analysis of wave motion is based on a Love rod model including the effects of lateral deformation. The present analysis also considers the effect of shear stress components. By applying Hamilton??s principle, the explicit nonlocal elasticity solution is obtained, and the effects of shear stress and length scale parameter are discussed.     

Postbuckling of viscoelastic micro/nanobeams embedded in visco-Pasternak foundations based on the modified couple stress theory

This paper investigates the postbuckling analysis of a viscoelastic microbeam embedded in a double layer viscoelastic foundation. This viscoelastic microbeam is modeled using the Kelvin–Voigt model and the modified couple stress theory. A material length scale parameter is utilized to describe the size-dependent behavior of the viscoelastic microbeam. The visco-Pasternak foundation used in this study contains a viscoelastic medium and a shear layer. This microbeam is subjected to an axial compressive load at the beam ends which can change as a function of time. According to the Euler–Bernoulli beam theory and von-Karman nonlinearity, the time-dependent equations of motion are derived by Hamilton’s principle. The nonlinear equations of motion are directly solved under the simply supported boundary condition. Both time-dependent deflection and viscoelastic buckling load are investigated. Finally, the influences of the material length scale parameter, parameters of the visco-Pasternak foundation and the material viscosity coefficient on the dynamic postbuckling response are studied.

     

Transverse vibration of rotary tapered microbeam based on modified couple stress theory and generalized differential quadrature element method

The transverse vibration of a rotary tapered microbeam is studied based on a modified couple stress theory and Euler–Bernoulli beam model. The governing differential equation and boundary conditions are derived according to Hamilton's principle. The generalized differential quadrature element method is then used to solve the governing equation for cantilever and propped cantilever boundary conditions. The effect of the small-scale parameter, beam length, rate of cross-section change, hub radius, and nondimensional angular velocity on the vibration behavior of the microbeam is presented.