Reduced graphene oxide anchored with δ-MnO2 nanoscrolls as anode materials for enhanced Li-ion storage

We developed a one-pot in situ synthesis procedure to form nanocomposite of reduced graphene oxide (RGO) sheets anchored with 1D δ-MnO₂ nanoscrolls for Li-ion batteries. The as-prepared products were characterized by X-ray diffraction (XRD), Raman spectra, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The electrochemical performance of the δ-MnO₂ nanoscrolls/RGO composite was measured by galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. The results show that the δ-MnO₂ nanoscrolls/RGO composite displays superior Li-ion battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1520 and 810 mAh g⁻¹, respectively. After 50 cycles, the reversible discharge capacity is still maintained at 528 mAh g⁻¹ at the current density of 100 mAh g⁻¹. The excellent electrochemical performance is attributed to the unique nanostructure of the δ-MnO₂ nanoscrolls/RGO composite, the high capacity of MnO₂ and superior electrical conductivity of RGO.     

Promising graphene/carbon nanotube foam@π-conjugated polymer self-supporting composite cathodes for high-performance rechargeable lithium batteries

Three-dimensional (3D) graphene foam materials are highly favored due to large accessible surface and excellent conductive network, which can be commendably applied as self-supporting electrodes for advanced rechargeable lithium batteries (RLBs). Here, promising graphene nanosheets/acid-treated multi-walled carbon nanotubes (GNS/aMWCNT)-supported 1,5-diaminoanthraquinone (DAA) organic foams [oGCTF(DAA)] are prepared by organic solvent displacement method followed by solvothermal reaction. And then electrochemical polymerization is carried out to obtain 3D porous GNS/aMWCNT organic foam-supported poly(1,5-diaminoanthraquinone) (oGCTF@PDAA) nanocomposites, which achieves the ordered growth of homogeneous PDAA nanoparticles on GNS/aMWCNT surface due to the role of oGCTF(DAA). Such structure largely improves PDAA utilization, facilitates charge transportation and suppresses the dissolution of PDAA. As a result, the oGCTF@PDAA cathode for RLBs delivers a high discharge capacity of 289 mAh g⁻¹ at 30 mA g⁻¹ and still retains 122 mAh g⁻¹ at extreme 10 A g⁻¹ for rapid charging/discharging. Moreover, superior cycling stability is achieved with only 14.8% capacity loss after 2000 cycles even at a high current density of 1 A g⁻¹.     

Microwave autoclave synthesized multi-layer graphene/single-walled carbon nanotube composites for free-standing lithium-ion battery anodes

Multi-layer graphene sheets have been synthesized by a time-efficient microwave autoclave method and used to form composites in situ with single-walled carbon nanotubes. The application of these composites as flexible free-standing film electrodes was then investigated. According to the transmission electron microscopy and X-ray diffraction characterizations, the average d-spacing of the graphene–single-walled carbon nanotube composites was 0.41 nm, which was obviously larger than that of the as-prepared pure graphene (0.36 nm). The reversible Li-cycling properties of the free-standing films have been evaluated by galvanostatic discharge–charge cycling and electrochemical impedance spectroscopy. Results showed that the free-standing composite film with 70 wt% graphene exhibited the lowest charge transfer resistance and the highest charge capacity of about 303 mAh g⁻¹ after 50 cycles, without any noticeable fading.     

Porous Fe2O3 nanorods anchored on nitrogen-doped graphenes and ultrathin Al2O3 coating by atomic layer deposition for long-lived lithium ion battery anode

Porous iron oxide (Fe₂O₃) nanorods anchored on nitrogen-doped graphene sheets (NGr) were synthesized by a one-step hydrothermal route. After a simple microwave treatment, the iron oxide and graphene composite (NGr-I-M) exhibits excellent electrochemical performances as an anode for lithium ion battery (LIB). A high reversible capacity of 1016 mAh g⁻¹ can be reached at 0.1 A g⁻¹. When NGr-I-M electrode was further coated by 2 ALD cycles of ultrathin Al₂O₃ film, the first cycle Coulombic efficiency (CE), rate performance and cycling stability of the coated electrode can be greatly improved. A stable capacity of 508 mAh g⁻¹ can be achieved at 2 A g⁻¹ for 200 cycles, and an impressive capacity of 249 mAh g⁻¹ at 20 A g⁻¹ can be maintained without capacity fading for 2000 cycles. The excellent electrochemical performance can be attributed to the synergy of porous iron oxide structures, nitrogen-doped graphene framework, and ultrathin Al₂O₃ film coating. These results highlight the importance of a rational design of electrode materials improving ionic and electron transports, and potential of using ALD ultrathin coatings to mitigate capacity fading for ultrafast and long-life battery electrodes.     

Nanodiamond particles/reduced graphene oxide composites as efficient supercapacitor electrodes

The paper reports on the preparation of reduced graphene oxide (rGO) modified with nanodiamond particles composites by a simple solution phase and their use as efficient electrode in electrochemical supercapacitors. The technique relies on heating aqueous solutions of graphene oxide (GO) and nanodiamond particles (NDs) at different ratios at 100 °C for 48 h. The morphological properties, chemical composition and electrochemical behavior of the resulting rGO/NDs nanocomposites were investigated using UV/vis spectrometry, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM) and electrochemical means. The electrochemical performance, including the capacitive behavior of the rGO/NDs composites were investigated by cyclic voltammetry and galvanostatic charge/discharge curves at 1 and 2 A g⁻¹ in 1 M H₂SO₄. The rGO/ND matrix with 10/1 ratio displayed the best performance with a specific capacitance of 186 ± 10 F g⁻¹ and excellent cycling stability.     

An easy one-step electrosynthesis of graphene/polyaniline composites and electrochemical capacitor

An easy electrochemical technique is proposed to prepare electrochemically reduced graphene oxide (ERGO)/polyaniline (PANI) composites in a single step. The technique uses a two-electrode cell in which a separator soaked with an acid solution is sandwiched between graphene oxide (GO)/aniline films deposited on conductive substrates and an alternating voltage was applied to the electrodes. Successful preparations of ERGO/PANI composites were evidenced by characterizations due to UV–vis-NIR, FT-IR, XPS, XRD, and SEM measurements with free-standing films of ERGO/PANI obtained easily by disassembling the two-electrode cells. The ERGO/PANI films exhibited a high mechanical stability, flexibility, and conductivity (68 S cm⁻¹ for the composite film containing 80% ERGO) with nanostructured PANI particles (smaller than 20 nm) embedded homogeneously between the ERGO layers. The two-electrode cells acted as electrochemical capacitors (ECs) after a sufficient voltage cycling and exhibited relatively large specific capacitances (195–243 F g⁻¹ at a scan rate of 100 mV s⁻¹) with an excellent cycle life (retention of 83% capacitance after 20,000 charge–discharge cycles). Influences of the GO/aniline ratio, the sort of electrolytes, and the weight of the composite on the energy storage characteristics of ECs comprising the ERGO/PANI composites were also studied.     

Enhanced rate capability of nanostructured three-dimensional graphene/Ni3S2 composite for supercapacitor electrode

Three-dimensional graphene/Ni₃S₂ (3DG/Ni₃S₂) composite electrodes were produced by a facile two-step synthesis route involving chemical vapor deposition (CVD) growth of graphene foam and in situ hydrothermal synthesis of Ni₃S₂. The porous structure of the prepared 3DG is ideal for use as a scaffold for fabricating monolithic composite electrodes. The relative content of Ni₃S₂ initially increased and then decreased with increasing hydrothermal reaction time. The basal surface of the electrode was completely covered after 6 h of hydrothermal reaction. The size of the Ni₃S₂ microspheres also increased with increasing hydrothermal reaction time. The composite electrodes exhibited good specific capacitance (11.529 F cm⁻² at 2 mA cm⁻², i.e., 2611.9 F g⁻¹ at 5 mV s⁻¹) and cyclability (retention of 88.97% capacitance after 1000 charge/discharge cycles at 20 mA cm⁻²). These results are attributed to the fact that the uniform distribution of the Ni₃S₂ microspheres increased the specific surface area of the electrode and facilitated electron transfer and ion diffusion. The 3D multiplexed and highly conductive pathways provided by the defect-free graphene foam also ensured rapid charge transfer and conduction to improve the rate capability of the supercapacitors.     

Simple self-assembly of SnS2 entrapped graphene aerogel and its enhanced lithium storage performance

In this work, SnS₂ nanoplates entrapped graphene aerogel has been successfully prepared by simple self-assembly of reduced graphene oxide obtained through mild chemical reduction. Structural and morphological investigations demonstrated that SnS₂ nanoplates are highly dispersed in the three dimensional (3D) porous graphene matrix. When served as anode material for lithium-ion batteries, the electrochemical properties of SnS₂/graphene aerogel (SnS₂/GA) were evaluated by galvanostatic discharge–charge tests, cyclic voltammetry and impedance spectroscopy measurement. Compared with pristine SnS₂, the SnS₂/GA nanocomposite achieved a much higher initial reversible capacity (1186 mAh g⁻¹), superior cyclic stability (1004 mAh g⁻¹ after 60 cycles, corresponding to 84.7% of the initial reversible capacity), as well as better rate capability (650 mAh g⁻¹ at a current density of 1000 mA g⁻¹). This significantly improved lithium storage performance can be attributed to the good integration of SnS₂ nanoplates with 3D porous graphene network, which can not only provide much more active sites and easy access for Li ions intercalation, but also prevent the aggregation of SnS₂ nanoplates and facilitate fast transportation of Li ions and surface electrons during the electrochemical process.     

Iodine doped graphene as anode material for lithium ion battery

I-doped graphene is synthesized by a facile heat treatment method and used as anode material for lithium ion battery. The doped graphene exhibits high reversible capacity (1690 mAh g⁻¹ at 100 mA g⁻¹), good cyclability (retaining 92.6% reversible capacity after 200 cycles) and excellent rate performance compared with undoped graphene. The superior electrochemical performance of the I-doped graphene is explained by the change of graphene lattice, defects and positive charge density introduced by the doping of I atoms.     

Synthesis of cross-linked graphene aerogel/Fe2O3 nanocomposite with enhanced supercapacitive performance

In this work, cross-linked graphene aerogel (CL-GA) and its composite with Fe₂O₃ nanoparticles (NPs) were synthesized through a one-step hydrothermal procedure by using p-phenylenediamine (PPD). Structural characterizations revealed that in the preparation of the composite PPD acts as a cross-liker and provides high surface area by decreasing restacking of graphene sheets and functions as nitrogen source simultaneously. The electrochemical characteristics of the nanocomposite were investigated by cyclic voltammetry (CV), galvanostatic charge/discharge, electrochemical impedance spectroscopy (EIS) and Fast Fourier transform continues cyclic voltammetry (FFTCCV). The results show that cross-linked graphene aerogel/Fe₂O₃ (CL-GA/Fe₂O₃) nanocomposite displays enhanced supercapacitive performance, where it has capacitance of 445 at 1 A g⁻¹, high energy density of 63 W h Kg⁻¹, and 89% capacitance retention after 5000 cycles in 3 M KOH. Presence of PPD considerably improved supercapacitive performance of nanocomposite as a result it could be promising material in synthesis of efficient graphene/metal oxide-based electrode material for high performance supercapacitors.     

Improved activity of a graphene–TiO2 hybrid electrode in an electrochemical supercapacitor

We present a simple and fast approach for the synthesis of a graphene–TiO₂ hybrid nanostructure using a microwave-assisted technique. The microstructure, composition, and morphology were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, Raman microscopy, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy. The electrochemical properties were evaluated using cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge–discharge tests. Structural analysis revealed a homogeneous distribution of nanosized TiO₂ particles on graphene nanosheets. The material exhibited a high specific capacitance of 165 F g⁻¹ at a scan rate of 5 mV s⁻¹ in 1 M Na₂SO₄ electrolyte solution. Theenhanced supercapacitance property of these materials could be ascribed to the increased conductivity of TiO₂ and better utilization of graphene. Moreover, the material exhibited long-term cycle stability, retaining ∼90% specific capacitance after 5000 cycles, which suggests that it has potential as an electrode material for high-performance electrochemical supercapacitors.     

Hydrazine hydrate-induced hydrothermal synthesis of MnFe2O4 nanoparticles dispersed on graphene as high-performance anode material for lithium ion batteries

Herein, a MnFe₂O₄/graphene (MnFe₂O₄/G) nanocomposite has been synthesized via a facile N₂H₄·H₂O-induced hydrothermal method. During the synthesis, N₂H₄·H₂O is employed to not only reduce graphene oxide to graphene, but also prevent the oxidation of Mn²⁺ in alkaline aqueous solution, thus ensuring the formation of MnFe₂O₄/G. Moreover, MnFe₂O₄ nanoparticles (5–20 nm) are uniformly anchored on graphene. MnFe₂O₄/G electrode delivers a large reversible capacity of 768 mA h g⁻¹ at 1 A g⁻¹ after 200 cycles and high rate capability of 517 mA h g⁻¹ at 5 A g⁻¹. MnFe₂O₄/G holds great promise as anode material in practical applications due to the outstanding electrochemical performance combined with the facile synthesis strategy.     

One-step hydrothermal synthesis of Sb2S3/reduced graphene oxide nanocomposites for high-performance sodium ion batteries anode materials

Sb₂S₃/reduced graphene oxide (SSR) nanocomposites were successfully synthesized through a facile one-step hydrothermal process, as used as anode materials for sodium ion batteries (SIBs). The characterization and electrochemical performance of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption isotherms, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of reduced graphene oxide (RGO) can improve the electrochemical performances of SSR nanocomposites. SSR nanocomposites with 10 wt% RGO exhibits the highest reversible capacity of 581.2 mAh g⁻¹ at the current density of 50 mA g⁻¹ after 50 cycles, and excellent rate performance for SIBs. The improved electrochemical performance is attributed to the smaller Sb₂S₃ nanoparticles dispersed on RGO crumpled structure and synergetic effects between Sb₂S₃ and RGO matrix, which can increase specific surface area and improve electrical conductivity, reduce sodium ion diffusion distance, and effectively buffer volume changes during cycling process.     

Ag nanoparticles anchored NiO/GO composites for enhanced capacitive performance

Hierarchical nickel oxide/graphene oxide (NiO/GO) and nickel oxide/graphene oxide/silver (NiO/GO/Ag) heterostructures were sucessfully fabricated as high-performance supercapacitors electrode materials by using a hydrothermal process and a photoreduction process. The experimental results showed that the NiO/GO/Ag heterostructure electrodes showed better electrochemical performance than those of NiO/GO and bare NiO nanosheets. The NiO/GO/Ag electrode exhibited a higher specific capacitance of 229 F g⁻¹ at a current density of 1 A g⁻¹, higher than that of 161 F g⁻¹ for NiO/GO composites. Furthermore, NiO/GO/Ag electrode also showed good rate capability (still 200 F g⁻¹ at 6 A g⁻¹) and cycling stability (24% loss after 2000 repetitive cycles at a scan rate of 20 mV s⁻¹). The enhanced capacitive performance of the NiO/GO/Ag composites was mainly attributed to the introduction of Ag nanoparticles, which increased the electrical conductivities of the composites, and promoted the electron transfer between the active components. This study suggested that NiO/GO/Ag composites were a promising class of electrode materials for high performance energy storage applications.     

A high capacity NiFe2O4/RGO nanocomposites as superior anode materials for sodium-ion batteries

NiFe₂O₄/reduced graphene oxide (NFO/RGO) nanocomposites were prepared by a facile one-step hydrothermal method and used as anode for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of as-prepared samples were evaluated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge tests. The results show that NFO/RGO-20 (20 wt%) delivers the highest reversible capacity of ~450 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability. The excellent sodium storage performance of NFO/RGO should be attributed to the synergistic effect between NFO and RGO to form conductive network structure, which offers the increased specific surface area, the facilitated electron transfer ability and the buffering of volume expansion.     

MoO3/reduced graphene oxide composites as anode material for sodium ion batteries

MoO₃/reduced graphene oxide (MoO₃/RGO) composites were successfully prepared via a facile one-step hydrothermal method, and evaluated as anode materials for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of RGO can enhance the electrochemical performances of MoO₃/RGO composites. MoO₃/RGO composite with 6 wt% RGO delivers the highest reversible capacity of ~208 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability and excellent rate performance for SIBs. The excellent sodium storage performance of MoO₃/RGO should be attributed to the synergistic effect between MoO₃ and RGO, which offers the increased electrical conductivity, the facilitated electron transfer ability and the buffering of volume expansion.     

Hollow ZnSnO3 cubes@carbon/reduced graphene oxide ternary composite as anode of lithium ion batteries with enhanced electrochemical performance

The ternary composite, carbon coated hollow ZnSnO₃ (ZS@C) cubes encapsulated in reduced graphene oxide sheets (ZS@C/rGO), was synthesized via low-temperature coprecipitation and colloid electrostatic self-assembly. The uniform carbon-coating layer not only plays a role in buffering the volume change of ZnSnO₃ cubes in the charging/discharging processes, but also forms three-dimensional network with the cooperation of graphene to maintain the structural integrity and improve the electrical conductivity. The results show that the reduced graphene oxide sheets encapsulated ZS@C microcubes with a typical core-shell structure of ~700 nm in size exhibit an improved electrochemical performance compared with bare ZS@C microcubes. The ZS@C/rGO electrode delivered an initial discharge capacity of 1984 mA h g⁻¹ at a current density of 0.1 A g⁻¹ and maintained a capacity of 1040 mA h g⁻¹ after 45 cycles. High specific capacity and superior cycle stability indicate that the ZS@C/rGO composite has a great potential for the application of lithium-ion anode material.     

3D NiCo2S4 nanorod arrays as electrode materials for electrochemical energy storage application

It is essential to develop new electrode materials for electrochemical energy storage to meet the increasing energy demands, reduce environmental pollution and develop low-carbon economy. In this work, binder-free NiCo₂S₄ nanorod arrays (NCS NRAs) on nickel foam electrodes are prepared by an easy and low energy-consuming route. The electrodes exhibit superior electrochemical properties both for alkaline and Li-ion batteries. In 3 M KOH electrolyte, the NCS NRAs achieve a specific capacity of 240.5 mA h g⁻¹ at a current density of 0.2 A g⁻¹, and 105.7 mA h g⁻¹ after 1500 cycles at the current density of 5 A g⁻¹ with capacity retention of 87.3%. As the anode for LIBs, it shows a high initial capacity of 1760.7 mA h g⁻¹ at the current density of 100 mA g⁻¹, corresponding coulombic efficiency of 87.6%, and a rate capacity of 945 mA h g⁻¹ when the current density is improved 10 times. Hence, the NiCo₂S₄ nanorod arrays are promised as electrode materials with competitive performance.     

Low-temperature preparation of nitrogen-doped graphene for supercapacitors

A simple method to prepare nitrogen-doped graphene (NG) by a pressure-promoted process at relatively low temperatures is demonstrated. The NG with an atomic N content higher than 10% can be obtained by heating graphene oxide and NH₄HCO₃ in a sealed autoclave at a temperature as low as 150 °C. The product exhibits a specific capacitance of 170 F g⁻¹ at 0.5 A g⁻¹ in 5 M KOH, and a high retention rate of 96.4% of its initial capacitance after 10,000 charge/discharge cycles at a current density of 10 A g⁻¹. Such an easy, cost-effective and low-temperature doping process will be promising for preparing devices based on NG.     

The additive-free electrode based on the layered MnO2 nanoflowers/reduced,graphene oxide film for high performance supercapacitor

The MnO₂ nanoflowers/reduced graphene oxide composite is coated on a nickel foam substrate (denoted as MnO₂ NF/RGO @ Ni foam) via the layer by layer (LBL) self-assembly technology without any polymer additive, following the soft chemical reduction. The layered MnO₂ NF/RGO composite is uniformly anchored on the Ni foam skeleton to form the 3D porous framework, and the interlayers have access to lots of ions channels to improve the electron transfer and diffusion. This special construction of 3D porous structure is beneficial to the enhancement of electrochemical property. The specific capacitance is up to 246 F g⁻¹ under the current density of 0.5 A g⁻¹. After 1000 cycles, it can retain about 93%, exhibiting excellent cycle stability. The electrochemical impedance spectroscopy measurements confirm that MnO₂ NF/RGO @ Ni foam electrode has lower R_ESR and R_CT values when compared to MnO₂ @ Ni foam and RGO @ Ni foam. This study opens a new door to the preparation of composite electrodes for high performance supercapacitor.