Synthesis and photocatalytic activity of ring-like anatase TiO2 with {001} facts exposed

Developing photocatalysts with specific morphology and good photocatalytic activities promises good opportunities to discover the geometry-dependent properties. In the present work, ring-like anatase TiO₂ with dominant {001} facets exposed were successfully synthesized via a one-pot solvothermal process of tetrabutyl titanate and hydrofluoric acid solution at 180 °C for 8 h. We found that hydrofluoric acid plays an important role in the formation of ring-like TiO₂. The morphology and microstructure were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Brunauer–Emmett–Teller N₂ gas adsorption–desorption isotherms. The photocatalytic activity was evaluated by photocatalytic oxidation degradation of methylene blue aqueous solution under UV light. Results showed that ring-like TiO₂ with {001} facets exposed exhibited an excellent photocatalytic activities due to its unique structure: Nanosheets with hole.     

Photocatalytic performance of plasma sprayed Pt-modified TiO2 coatings under visible light irradiation

Plasma sprayed Pt/TiO₂ coatings were prepared by Atmospheric Plasma Spraying process. As-sprayed coatings were characterized by TEM, XRD and XPS. The photocatalytic performance was evaluated through the photo mineralization of methylene blue. All the Pt modified titanium dioxide coatings show significant absorption in the visible light range, while the pure titania coating reflects almost all the visible light. The photocatalytic efficiencies of as-sprayed pure TiO₂ coating and Pt/TiO₂ coatings are almost same under the irradiation of visible light. However, the efficiencies of all Pt/TiO₂ coating are greatly improved comparing with that of pure TiO₂ coating by applying 15 V external bias under the irradiation of visible light.     

The photo-catalytic activities of neodymium and fluorine doped TiO2 nanoparticles

A series of photo-catalysts were synthesized by neodymium and fluorine doped TiO₂, and their characteristics evaluated by X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (UV–vis), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Neodymium and fluorine doped TiO₂ has obvious absorption in the visible light and the absorption edge shifts toward red wavelength. In addition, compared with pure TiO₂, the doped catalyst has intense absorption at 528, 587, 750, 808, and 881 nm. The catalytic efficiency was tested by monitoring the photo-catalytic degradation of methylene blue (MB) in visible light and ultraviolet light. The results showed that the optimum doping content was Nd:F:TiO₂ = 0.5:5:100 (molar ratio) heat treated at 500 °C, and the reaction rates of MB degradation were estimated to be about 1.76 times and 1.45 times higher than undoped TiO₂ in ultraviolet light and visible light.     

Sacrificial template synthesis of core-shell SrTiO3/TiO2 heterostructured microspheres photocatalyst

The core-shell SrTiO₃/TiO₂ heterostructure was obtained via a combined hydrothermal route and calcination treatment using amorphous spherical TiO₂ as both template and reactant. Adjusting the hydrothermal environments can control the morphology of the post-calcined sample when it is hydrothermally treated at 180 °C/3 h and 200 °C/6 h, respectively. Following the heat treatment at 700 °C/4 h, the obtained powder illustrates the core-shell heterostructure with a hierarchical surface, and the diameter of the microsphere is about 700 nm. This synthesizing route facilitates the formation of a concentration gradient of SrTiO₃ and TiO₂, and subsequently constructs a gradient energy level, which helps the samples exhibited an excellent de-colorize activity over the methylene blue. The possible formation mechanism of core-shell SrTiO₃/TiO₂ heterostructures was proposed to guide the further improvement of their photocatalytic activity.     

Photocatalytic Nb2O5-doped TiO2 nanoparticles for glazed ceramic tiles

TiO₂ nanoparticles are currently used as coating for self-cleaning building products. In order to achieve high self-cleaning efficiency for outdoor applications, it is important that titania is present as anatase phase. Moreover, it is desirable that the particle sizes are in nano-range, so that a large enough surface area is available for enhanced catalytic performance. In this work, TiO₂ nanoparticles doped with 0–5 mol% Nb₂O₅ were synthesized by co-precipitation. Nb₂O₅ postponed the anatase to rutile transformation of TiO₂ by about 200 °C, such that after calcination at 700 °C, no rutile was detected for 5 mol% Nb₂O₅-doped TiO₂, while undoped TiO₂ presented 90 wt% of the rutile phase. A systematic decreasing on crystallite size and increasing on specific surface area of TiO₂ were observed with higher concentration of Nb₂O₅ dopant. Photocatalytic activity of anatase polymorph was measured by the decomposition rate of methylene blue under ultraviolet and daylight illumination and compared to commercial standard catalyst (P25). The results showed enhanced catalysis under UV and visible light for Nb₂O₅-doped TiO₂ as compared to pure TiO₂. In addition, 5 mol% Nb₂O₅-doped TiO₂ presented higher photocatalytic activity than P25 under visible light. The enhanced performance was attributed to surface chemistry change associated with a slight shift in the band gap.     

From AgI/TiO2 to Ag/TiO2: effects of the annealing temperature on the compositions,porous nanostructures,and visible-light photocatalytic properties

AgI/TiO₂ and Ag/TiO₂ porous nanostructures were synthesized using AgNO₃, KI, thioglycollic acid, and tetrabutyl orthotitanate as a precursor. AgI nanoparticles were used as seeds to initiate the nucleation of a precursor TiO₂ shell, and thioglycollic acid acted as a hydrolysis inhibitor and porosity promoter. The hybridized samples were annealed at different temperatures. Porous AgI/TiO₂ nanostructures were formed at low annealing temperatures (300 and 400 °C). At 600 °C, the porous Ag/TiO₂ nanostructures exhibited a plasmon resonance effect. The formation mechanism of the different porous nanostructures was also investigated. Methylene blue solutions were used as wastewater to evaluate the visible-light photocatalytic activity of the samples. The porous nanostructured photocatalyst exhibited substantially high visible-light-induced photocatalytic activity for the photodegradation of methylene blue compared with pristine AgI and TiO₂ nanoparticles.     

Visible-light-induced photocatalytic activity of TiO2−xNy prepared by solvothermal process in urea–alcohol system

Nitrogen-doped anatase, rutile and brookite titania photocatalyst TiO_2−xN_y which can be excited by visible light were prepared by mixing aqueous TiCl₃ solutions with urea ((NH₂)₂CO) and various type of alcohols followed by solvothermal treatment at 190 °C. The phase composition, crystallinity, microstructure and specific surface area of titania powders greatly changed depending on the pH and type of solvents. Violet, yellowish and grayish TiO_2−xN_y with excellent visible light absorption and photocatalytic activity were prepared. The TiO_2−xN_y powders prepared in urea–methanol solution showed excellent photocatalytic ability for the oxidative destruction of nitrogen monoxide under irradiation of visible light λ > 510 nm.     

Freestanding hematite nanofiber membrane for visible-light-responsive photocatalyst

Freestanding mesoporous hematite (α-Fe₂O₃) nanofiber membranes were successfully fabricated by sol–gel electrospinning process using ferratrane precursor for use as a high-performance material for visible-light-responsive photocatalyst. Non-porous nanofiber membranes spun on the heated collector at 300 °C were crystalline α-Fe₂O₃ phase. Upon calcination, pure mesoporous nanofiber membranes were obtained even at a low temperature of 400 °C. The photocatalytic membrane calcined at 400 °C showed the highest efficiency for methylene blue (MB) degradation under visible-light irradiation. The synergetic effects of higher surface area, pore volume and pore diameter promoted the photocatalytic efficiency for MB degradation under visible light. The utilization of photocatalyst in the form of membrane could not only solve the problems of catalyst separation and recovery, but also produce high photodegradation efficiency for both systems without and with hydrogen peroxide even at a catalyst loading as low as 0.04 g/L. No appreciable loss in photocatalytic activity was observed and structural integrity was retained, even after five cycles of photodegradation, which predicted the stability and reusability of these nanofiber membranes for practical use in environmental applications.     

Decomposition of nonionic surfactant on a nitrogen-doped photocatalyst under visible-light irradiation

A visible-light-active N-containing TiO₂ photocatalysts were prepared from crude amorphous titanium dioxide by heating amorphous TiO₂ in gaseous NH₃ atmosphere. The calcination temperatures ranged from 200 to 1000 °C, respectively. UV–vis/DR spectra indicated that the N-doped catalysts prepared at temperatures <400 °C absorbed only UV light (E_g = 3.3 eV), whereas samples prepared at temperatures ≥400 °C absorbed both, UV (E_g = 3.10–3.31 eV) and vis (E_g = 2.54–2.66 eV) light. The chemical structure of the modified photocatalysts was investigated using FT-IR/DRS spectroscopy. All the spectra exhibited bands indicating nitrogen presence in the catalysts structure. The photocatalytic activity of the investigated catalysts was determined on a basis of a decomposition rate of nonionic surfactant (polyoxyethylenenonylphenol ether, Rokafenol N9). The most photoactive catalysts were those calcinated at 300, 500 and 600 °C. For the catalysts heated at temperatures of 500 and 600 °C Rokafenol N9 removal was equal to 61 and 60%, whereas TOC removal amounted to 40 and 35%, respectively. In case of the catalyst calcinated at 300 °C surfactant was degraded by 54% and TOC was removed by 35%. The phase composition of the most active photocatalysts was as follows: (a) catalyst calcinated at 300 °C—49.1% of amorphous TiO₂, 47.4% of anatase and 3.5% of rutile; (b) catalyst calcinated at 500 °C—7.1% of amorphous TiO₂, 89.4% of anatase and 3.5% of rutile; (c) catalyst calcinated at 600 °C—94.2% of anatase and 5.8% of rutile.     

Preparation of novel nanometer TiO2 catalyst doped with upconversion luminescence agent and investigation on degradation of acid red B dye using visible light

An unreported nanometer TiO₂ photocatalyst doped with upconversion luminescence agent (40CdF₂ · 60BaF₂ · 0.8Er₂O₃) utilizing visible light was prepared. Its photocatalytic activity was checked through the photocatalytic degradation of acid red B as a model compound under visible light irradiation. Results show that the upconversion luminescence agent prepared as dopant can effectively turn visible lights to ultraviolet lights, which can be absorbed by nanometer TiO₂ particles to produce the electron-cavity pairs. Therefore, the photocatalytic ability of this novel TiO₂ photocatalyst has greatly been enhanced compared with undoped and common TiO₂ photocatalyst.     

Template-assisted hydrothermal synthesis and photocatalytic activity of novel TiO2 hollow nanostructures

TiO₂ hollow nanostructures were successfully synthesized by a controlled hydrothermal precipitation reaction using Resorcinol–Formaldehyde resin spheres as templates in aqueous solution, and then removal of the RF resins spheres by calcination in air at 450 °C for 4 h. The obtained TiO₂ hollow spheres were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption analysis, and UV–visible diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic decolorization of rhodamine B aqueous solution at ambient temperature under UV illumination. The results indicated TiO₂ hollow nanostructures exhibit the excellent photocatalytic activity probably due to the unique hollow micro-architectures.     

Preparation of graphene film decorated TiO2 nano-tube array photoelectrode and its enhanced visible light photocatalytic mechanism

Graphene film decorated TiO₂ nano-tube array (GF/TiO₂ NTA) photoelectrodes were prepared through anodization, followed by electrodeposition strategy. Morphologies and structures of the resulting GF/TiO₂ NTA samples were characterized by scanning electrons microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy. In addition, the optical and photoelectrochemical properties were investigated through UV–visible light diffuse reflection spectroscopy, photocurrent response and Mott–Schottky analysis. Furthermore, the photodecomposition performances were investigated through yield of hydroxyl radicals and photocatalytic (PC) degradation of methyl blue (MB) under visible light irradiation. It was found that GF/TiO₂ NTA photoelectrode exhibited intense light absorption both in UV light and visible region, higher transient photoinduced current of 0.107 mA cm⁻² and charge carrier concentration of 0.84 × 10¹⁹ cm⁻³, as well as effective PC performance of 65.9% for the degradation of MB. Furthermore, contribution of several reactive species to the PC efficiency of GF/TiO₂ NTA photoelectrode was distinguished. Moreover, the enhanced visible light PC mechanism was proposed and confirmed in detail.     

Photocatalytic activity of porous titania nanocrystals prepared by nanoscale permeation process in supercritical CO2: Effects of supercritical conditions

Porous TiO₂ nanocrystals (PTN) were synthesized using activated carbon templates with supercritical CO₂ by using the nanoscale permeation (NP) process. The photoactivity of PTN was tested by methylene blue (MB) degradation. Compared with the commercially available P-25, all PTN exhibited significant photocatalytic degradation of MB mainly due to their porous structure with high surface area, high hydroxy concentration and small crystalline size. The optimum temperature and pressure are found to be 60 °C and 26 MPa, under which obtained PTN-1 shows the highest photoactivity and slow deactivation for MB degradation after 15 trials.     

Novel nitrogen-doped anatase TiO2 mesoporous bead photocatalysts for enhanced visible light response

This work reports the synthesis and characterization of a novel, high surface area N-doped anatase TiO₂ mesoporous bead as a photocatalyst for visible light photodegradation. The beads were prepared using a two-cycle microwave-assisted hydrothermal method using three different types of nitrogen dopants: diaminohexane, triethylamine, and urea. In the first cycle, TiO₂mesoporous beads with controlled structures were synthesized at 200 °C without further calcination. The obtained beads were then subjected to a second cycle of microwave -assisted hydrothermal process for nitrogen doping. The photocatalytic activity of the N-doped mesoporous TiO₂ beads was determined by measuring the decomposition of a methyl blue aqueous solution under UV and visible light. It was found that different precursors lead to different degrees of doping which enhances the light absorption primarily in the visible light region. We demonstrate that the photocatalytic activity or photodegradation is enhanced in the visible light region.     

TiO2 nanofibers doped with rare earth elements and their photocatalytic activity

In the present study rare earth doped (Ln³⁺–TiO₂, Ln = La, Ce and Nd) TiO₂ nanofibers were prepared by the sol–gel electrospinning method and characterized by XRD, SEM, EDX, TEM, and UV-DRS. The photocatalytic activity of the samples was evaluated by Rhodamine 6G (R6G) dye degradation under UV light irradiation. XRD analysis showed that all the synthesized pure and doped titania nanofibers contain pure anatase phase at 500 °C but at 700 °C it shows both anatase and rutile phase. XRD result also shows that Ln³⁺-doped titania probably inhibits the phase transformation. The diameter of nanofibers for all samples ranges from 200 to 700 nm. It was also observed that the presence of rare-earth oxides in the host TiO₂ could decrease the band gap and accelerate the separation of photogenerated electron–hole pairs, which eventually led to higher photocatalytic activity. To sum up, our study demonstrates that Ln³⁺-doped TiO₂ samples exhibit higher photocatalytic activity than pure TiO₂ whereas Nd³⁺-doped TiO₂ catalyst showed the highest photocatalytic activity among the rare earth doped samples.     

Synergic effect of cation doping and phase composition on the photocatalytic performance of TiO2 under visible light

The synergic effect of cation doping and phase composition for the further improvement of the photocatalytic activity of TiO₂ under visible light is reported for the first time. Fe^3 + and Sn^4 + co-doped TiO₂ with optimized phase composition were synthesized through a simple soft-chemical solution method. The visible-light-driven photocatalytic activity of Fe^3 + and Sn^4 + co-doped TiO₂ was 5 times of that of Evonik P25 TiO₂ using degradation of methylene blue as model reaction. The synthesized photocatalysts were characterized by powder X-ray diffraction, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, ¹¹⁹Sn Mössbauer spectroscopy, and X-ray absorption fine structure spectroscopy. It is indicated that Sn^4 + doping can facilitate the phase transition from anatase to rutile. The different ratios of anatase and rutile can be achieved by tuning the amount of Sn^4 + doped into the lattice. Furthermore, the doping of Sn^4 + into TiO₂ lattice can stabilize the phase composition when Fe^3 + is co-doped. In the Fe^3 + and Sn^4 + co-doped TiO₂, Sn^4 + is mainly used to tune and stabilize the phase composition of TiO₂ and Fe^3 + acts as a doping cation to narrow the band gap of TiO₂. Both band gap and phase composition of TiO₂ can be tuned effectively by the simultaneous introduction of Fe^3 + and Sn^4 +. The synergic effect of optimized phase composition (anatase/rutile = 25/75) and narrowed band gap should be the two main reasons for the promoted photocatalytic activity of TiO₂ under visible light.     

Study on properties and synthesis of sulfonated coal supported nanostructure TiO2 photocatalysts

Nano-TiO₂ was synthesized with titanium sulfate by a simple economical microwave-assisted-hydrolysis method, and it was successfully coated on semi-organic-matter sulfonated coal (SC). SC as a semi-organic matter was first chosen as the substrate of nano-TiO₂. Their surface morphology and structure were investigated by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The hybrid nano-composite photocatalyst exhibited a good photocatalytic activity in degrading methylene blue (MB). Results revealed that under the assistance of microwave-process, the anatase TiO₂ can be synthesized at low temperature (around 100 °C), presents a strong crystalline and has a good photocatalytic performance.     

Enhanced photocatalytic activity of TiO2-ZnO thin films deposited by dc reactive magnetron sputtering

The effect of deposition conditions on the photocatalytic activity of TiO₂-ZnO thin films was studied. By using a (Ti)₉₀-(Zn)₁₀ alloy target, the samples were deposited at room temperature on glass substrates by dc reactive magnetron sputtering and post-annealed in air at 500 °C. The dependence of the physical properties of the films on the O₂/Ar gas ratio and the deposition working pressure was investigated. XRD patterns showed mainly the formation of the anatase phase of TiO₂. Optical absorption measurements exhibited a blue shift of the band-gap energy with increasing working pressure. XPS spectra indicated the presence of the Ti⁴⁺ and Zn²⁺ oxidation states, which correspond to TiO₂ and ZnO, respectively. The chemical state of Ti was further analyzed by means of the modified Auger parameter, α’, which gave a value of ca. 873 eV. The photocatalytic property of the films was assessed by the degradation of a methylene blue aqueous solution. The maximum photocatalytic performance was observed for the samples deposited at 3.0 mTorr and O₂/Ar gas ratio of 10/90. These results are explained in terms of the structural, optical, and morphological properties of the films.     

Photocatalytic activity of titanium dioxide coatings: Influence of the firing temperature of the chemical gel

Heterogeneous photocatalysis can be exploited for the decomposition of micro-organisms which have developed on the surfaces of building materials. In this work, the efficiency of titanium dioxide coatings on fired clay products is examined. The sol–gel method is used to synthesize a fine TiO₂ powder with a specific surface area of 180 m² g^?1. Thermal treatment of the chemical gel at 340 °C leads to crystallisation in the anatase phase and with further temperature increase, crystallite growth. For thermal treatments in the range 580–800 °C, there is a progressive transition from anatase to rutile. However, despite a decrease in specific surface area of the powder attributed to aggregation/agglomeration, the coherent domain size deduced from X-ray diffraction measurements remains almost constant at 23 nm. Once the transition is completed, increase of thermal treatment temperature above 800 °C leads to further crystallite growth in the rutile phase. The thermally treated titania powders were then sprayed onto fired clay substrates and the photocatalytic activity was assessed by the aptitude of the coating to degrade methylene blue when exposed to ultraviolet light. These tests revealed that the crystallite size is the important controlling factor for photocatalytic activity rather than the powder specific surface area or the anatase/rutile polymorph ratio.     

Preparation and photocatalytic activity of silver and TiO2 nanoparticles/montmorillonite composites

Ag–TiO₂/montmorillonite (Ag–TiO₂/MMT) was synthesized as photocatalyst using TiCl₄ hydrolysis to introduce nanosized TiO₂ into the interlayer space of the montmorillonite (MMT). Stable pillared TiO₂/MMT was obtained by calcination at 500 °C, then silver was loaded by reduction of silver nitrate. The physico–chemical properties of the photocatalyst were determined by X-ray diffraction (XRD), infrared spectroscopy (IR), atomic absorption spectrophotometer (AAS), nitrogen gas adsorption (BET method) and UV–Visible spectra. The photooxidation activity for methylene blue (M.B.) degradation was as follows: Ag–TiO₂/MMT > TiO₂/MMT > TiO₂(P25). Among them Ag–TiO₂/MMT had the highest photooxidation activity because of its larger specific surface caused by pillaring and loading of silver for improving its light absorption.