Doped polyaniline/multiwalled carbon nanotube composites: Preparation and characterization

Polyaniline (PANI)/multiwalled carbon nanotube (MWNT) composites with a uniform tubular structure were prepared from in situ polymerization by dissolving amino‐functionalized MWNT (a‐MWNT) in aniline monomer. For this the oxidized multiwalled nanotube was functionalized with ethylenediamine, which provided ethylenediamine functional group on the MWNT surface confirmed by Fourier‐transform infrared spectra (FT‐IR). The a‐MWNT was dissolved in aniline monomer, and the in situ polymerization of aniline in the presence of these well dispersed nanotubes yielded a novel tubular composite of carbon nanotube having an ordered uniform encapsulation of doped polyaniline. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that the nanotubes were coated with a PANI layer. The thermal stability and electrical conductivity of the PANI /MWNTs composites were characterized by thermogravimetric analysis (TGA) and conventional four‐probe method respectively. Compared with pure PANI, the electrical conductivity and the decomposition temperature of the MWNTs/PANI composites increased with the enhancement of MWNT content in PANI matrix. POLYM. COMPOS., 34:1119–1125, 2013. © 2013 Society of Plastics Engineers     

Preparation and characterization of melt‐processed polycarbonate/multiwalled carbon nanotube composites

This study describes the preparation of polycarbonate (PC)/multiwalled carbon nanotube (MWCNT) composites by melt processing the PC and PC/MWCNT master batch at 260°C. The PC/MWCNT master batch was prepared using ultrasonic mixing the carboxylic acid containing MWCNT and PC in a tetrahydrofuran (THF) solution. The HRTEM images of PC/MWCNT master batch and PC/MWCNT nanocomposites show that the MWCNT is well separated and uniformly distributed in the PC matrices. Mechanical properties of the fabricated nanocomposites measured by dynamic mechanical analysis indicate significant improvements in the storage modulus when compared with that of pure PC matrix. The conductivities of 2 and 5 wt% PC/MWCNT nanocomposites are more than four and seven orders in magnitude higher than that of PC without MWCNT, respectively. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Polyethylene multiwalled carbon nanotube composites

Polyethylene (PE) multiwalled carbon nanotubes (MWCNTs) with weight fractions ranging from 0.1 to 10 wt% were prepared by melt blending using a mini-twin screw extruder. The morphology and degree of dispersion of the MWCNTs in the PE matrix at different length scales was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and wide-angle X-ray diffraction (WAXD). Both individual and agglomerations of MWCNTs were evident. An up-shift of 17 cm⁻¹ for the G band and the evolution of a shoulder to this peak were obtained in the Raman spectra of the nanocomposites, probably due to compressive forces exerted on the MWCNTs by PE chains and indicating intercalation of PE into the MWCNT bundles. The electrical conductivity and linear viscoelastic behaviour of these nanocomposites were investigated. A percolation threshold of about 7.5 wt% was obtained and the electrical conductivity of PE was increased significantly, by 16 orders of magnitude, from 10⁻²⁰ to 10⁻⁴ S/cm. The storage modulus (G′) versus frequency curves approached a plateau above the percolation threshold with the formation of an interconnected nanotube structure, indicative of ‘pseudo-solid-like’ behaviour. The ultimate tensile strength and elongation at break of the nanocomposites decreased with addition of MWCNTs. The diminution of mechanical properties of the nanocomposites, though concomitant with a significant increase in electrical conductivity, implies the mechanism for mechanical reinforcement for PE/MWCNT composites is filler-matrix interfacial interactions and not filler percolation. The temperature of crystallisation (T_c) and fraction of PE that was crystalline (F_c) were modified by incorporating MWCNTs. The thermal decomposition temperature of PE was enhanced by 20 K on addition of 10 wt% MWCNT.     

Preparation and properties of multiwalled carbon nanotube/epoxy‐amine composites

Different amounts of multiwalled carbon tubes (MWCNTs) were incorporated into an epoxy resin based on diglycidyl ether of bisphenol A and both epoxy precursor and composite were cured with 4,4′‐diamino diphenyl sulfone. Transmission and scanning electron microscopy demonstrated that the carbon nanotubes are dispersed well in the epoxy matrix. Differential scanning calorimetry measurements confirmed the decrease in overall cure by the addition of MWCNTs. A decrease in volume shrinkage of the epoxy matrix caused by the addition of MWCNTs was observed by pressure–volume–temperature measurements. Thermomechanical and dynamic mechanical analysis were performed for the MWCNT/epoxy composites, showing that the T_g was slightly affected, whereas the dimensional stability and stiffness are improved by the addition of MWCNTs. Electrical conductivity measurements of the composite samples showed that an insulator to conductor transition takes place between 0.019 and 0.037 wt % MWCNTs. The addition of MWCNTs induces an increase in both impact strength (18%) and fracture toughness (38%) of the epoxy matrix with very low filler content. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of polyaniline/multi-walled carbon nanotube composites

This study describes the synthesis of doped polyaniline in its emeraldine salt form (PANI-ES) with carboxylic groups containing multi-walled carbon nanotubes (c-MWNTs) via in situ polymerization. Both Raman and FTIR spectra indicate that carboxylic acid groups formed at both ends and on the sidewalls of the MWNTs. Based on the π-π* electron interaction between aniline monomers and MWNT and hydrogen bonding interaction between the amino groups of aniline monomers and the carboxylic acid group of c-MWNT, aniline molecules were adsorbed and polymerized on the surface of MWNTs. Structural analysis using FESEM and HRTEM showed that PANI-ES/c-MWNT composites are core (c-MWNT)-shell (doped-PANI-ES) tubular structures with diameters of several tens to hundreds of nanometers, depending on the PANI content. The conductivities of these PANI-ES/c-MWNT composites are 50-70% higher than those of PANI without MWNT.     

Thermosetting polyurethane multiwalled carbon nanotube composites

Thermosetting polyurethane (PU) multi‐walled carbon nanotube (MWCNT) nanocomposites at loadings up to 1 wt % were prepared via an addition polymerization reaction. The morphology of the nanocomposites and degree of dispersion of the MWCNTs was studied using a combination of scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and wide angle X‐ray diffraction (WAXD), and revealed the nanotubes to be highly dispersed in the PU matrix. Addition of just 0.1 wt % MWCNTs resulted in significant enhancements in stiffness, strength and toughness. Increases in Young's modulus, % elongation at break and ultimate tensile strength of 561, 302 and 397% were measured for the nanocomposites compared to the unfilled PU. The effect of the MWCNTs on the modulus of the PU was evaluated using the Rule of Mixtures, Krenchel and Halpin‐Tsai models. Only the Halpin‐Tsai model applied to high aspect ratio nanotubes was in good agreement with the modulus values determined experimentally. Strong interfacial shear stress was found between PU chains and nanotubes, up to 439 MPa, calculated using a modified Kelly‐Tyson model. Evidence for strong interfacial interactions was obtained from the Raman spectra of both the precursor materials and nanocomposites. When the MWCNTs were added to the isophorone diisocyanate an up‐shift of 14 cm^?1 and on average 40 cm^?1 was obtained for the position of the carbon‐hydrogen (C? H) out‐of plane bending (766 cm^?1) and isocyanate symmetric stretch (1420 cm^?1) modes respectively. Moreover, an up‐shift of 24 cm^?1 was recorded for the nanotube tangential mode (G‐band) for the 1.0 wt % nanocomposite because of the compressive forces of the PU matrix acting on the MWCNTs. The dynamic mechanical (DMA) properties of the PU thermoset and the nanocomposites were measured as a function of temperature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Rheological behavior of multiwalled carbon nanotube/polycarbonate composites

The rheological behavior of compression molded mixtures of polycarbonate containing between 0.5 and 15 wt% carbon nanotubes was investigated using oscillatory rheometry at 260 °C. The nanotubes have diameters between 10 and 15 nm and lengths ranging from 1 to 10 μm. The composites were obtained by diluting a masterbatch containing 15 wt% nanotubes using a twin-screw extruder. The increase in viscosity associated with the addition of nanotubes is much higher than viscosity changes reported for carbon nanofibers having larger diameters and for carbon black composites; this can be explained by the higher aspect ratio of the nanotubes. The viscosity increase is accompanied by an increase in the elastic melt properties, represented by the storage modulus G′, which is much higher than the increase in the loss modulus G″. The viscosity curves above 2 wt% nanotubes exhibit a larger decrease with frequency than samples containing lower nanotube loadings. Composites containing more than 2 wt% nanotubes exhibit non-Newtonian behavior at lower frequencies. A step increase at approximately 2 wt% nanotubes was observed in the viscosity-composition curves at low frequencies. This step change may be regarded as a rheological threshold. Ultimately, the rheological threshold coincides with the electrical conductivity percolation threshold which was found to be between 1 and 2 wt% nanotubes.     

Synthesis and characterization of multiwalled carbon nanotube/polyurethane composites via surface modification multiwalled carbon nanotubes using silane coupling agent

Well‐dispersed multiwalled carbon nanotubes/polyurethane (MWCNTs/PU) composites were synthesized in situ polymerization based on treating MWCNTs with nitric acid and silane coupling agent. The morphology and degree of dispersion of the MWCNTs were studied using a high resolution transmission electron microscopy (HR‐TEM) and X‐ray powder diffraction (XRD). The result showed that MWCNTs could be dispersed still in the PU matrix well with the addition of 2 wt% MWCNTs. The thermal and mechanical properties of the composites were characterized by dynamic mechanical thermal analysis, thermogravimetric analysis, tensile, and impact testing. The result suggested that the glass transition temperature (T_g) of composites increased greatly with increasing MWCNTs content slightly, and the MWCNTs is also helpful to improve mechanical properties of composites. Furthermore, the composites have an excellent mechanical property with the addition of 0.5 wt% MWCNTs. The electrical property testing indicates that the MWCNTs can improve evidently the electrical properties of composites when adding 1 wt% MWCNTs to the PU matrix. The volume resistivity of composites reaches to an equilibrium value. POLYM. COMPOS., 33:1866–1873, 2012. © 2012 Society of Plastics Engineers     

Preparation and characterization of nylon610/functionalized multiwalled carbon nanotubes composites

Nylon610 nanocomposites containing functionalized multiwalled carbon nanotubes (MWCNTs) were prepared using wet melt blending method, which is a novel preparation technique. In comparison with the pure nylon610, the elastic modulus, tensile strength, bending modulus, and bending strength of the composites increase significantly with the increase of MWCNTs content, and the mechanical properties of the composites are also improved significantly by adding a small amount of MWCNTs (0.1 wt %). The crystallization peak of the composites shifts to higher temperature with the addition of MWCNTs, and among the two melting peaks, the intensity of melting peak at low temperature decreases with increasing MWCNTs content. The composites are more stable than pure PA610 and decompose at higher temperature, suggesting that the accession of MWCNTs can improve the composites' thermal stability. The storage modulus of the composites decreases with the temperature increasing, but under lower temperature it increases significantly with the addition of MWCNTs–COOH except for PANT‐0.1 sample. Transmission electron microscope (TEM) images of composites exhibit that the wet melt blending technique can avoid the excess agglomeration of MWCNTs under vacuum dryness, which benefits MWCNTs to disperse uniformly in matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Broadband dielectric properties of multiwalled carbon nanotube/polystyrene composites

This study investigates the dielectric properties of multiwalled carbon nanotube (MWCNT)/polystyrene (PS) composites over the broadband frequency range, i.e., 10^?1 to 10⁶ Hz. The results showed that the real permittivity and imaginary permittivity increased remarkably with increased MWCNT concentration. For instance, at 100 Hz, the real permittivity and imaginary permittivity of the pristine PS was 2.71 and 0.01, respectively, which increased to 5.22 × 10⁴ and 3.28 × 10⁷ at 3.50 wt%, respectively. The increase in the real permittivity was related to the formation of a large number of nanocapacitor structures, i.e., MWCNTs as nanoelectrodes and polymer matrix as dielectric material, i.e., interfacial polarization. The increase in the imaginary permittivity with MWCNT loading was attributed greater number of dissipating charges, enhanced conductive network formation, and boosted polarization loss arising from interfacial polarization. It was also observed that the real and imaginary permittivities were frequency independent in the insulative region, whereas they decreased drastically with frequency in the conductive region. The descending trend of real permittivity with frequency in the conductive region was related to charge polarization relaxation, whereas the reduction in imaginary permittivity with frequency was attributed to lower Ohmic loss and polarization loss. POLYM. ENG. SCI., 55:173–179, 2015. © 2014 Society of Plastics Engineers     

Crystallization behavior of polyamide 11/multiwalled carbon nanotube composites

Differential scanning calorimetry (DSC) was used to investigate the isothermal and nonisothermal crystallization kinetics of polyamide11 (PA11)/multiwalled carbon nanotube (MWNTs) composites. The Avrami equation was used for describing the isothermal crystallization behavior of neat PA11 and its nanocomposites. For nonisothermal studies, the Avrami model, the Ozawa model, and the method combining the Avrami and Ozawa theories were employed. It was found that the Avrami exponent n decreased with the addition of MWNTs during the isothermal crystallization, indicating that the MWNTs accelerated the crystallization process as nucleating agent. The kinetic analysis of nonisothermal crystallization process showed that the presence of carbon nanotubes hindered the mobility of polymer chain segments and dominated the nonisothermal crystallization process. The MWNTs played two competing roles on the crystallization of PA11 nanocomposites: on the one hand, the MWNTs serve as heterogeneous nucleating agent promoting the crystallization process of PA11; on the other hand, the MWNTs hinder the mobility of the polymer chains thus retarding the crystal growth process of PA11. The activation energies of PA11/MWNTs composites for the isothermal and nonisothermal crystallization are lower than neat PA11. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Network behavior of thermosetting polyimide/multiwalled carbon nanotube composites

In previous published research, network formation has been used to understand morphology and properties in polymer nanocomposites containing carbon nanotubes (CNTs) through measurements of rheological and electrical percolation thresholds, largely in thermoplastic matrices. In this research, these tools are explored as a means to understand network transport mechanisms and changes in CNT dispersion during curing in a thermosetting matrix. Specifically, rheological and electrical measurements were performed on the uncured nanocomposites, and electrical measurements were performed on the cured nanocomposites. The resulting data were applied to a percolation model. The results showed that the uncured resin played a limited role in mediating rheological transport and that little CNT aggregation occurred during curing. The results of this initial work suggest that such a combination of techniques is applicable to understanding dispersion changes resulting from curing and provides complementary insight to that provided by electron microscopy imaging of the same phenomenon.     

Preparation and properties of multiwalled carbon nanotube/polycaprolactone nanocomposites

Multiwalled carbon nanotube/polycaprolactone nanocomposites (MWNT/PCL) were prepared by in situ polymerization, whereby as‐received MWNTs (P‐MWNTs) and purified MWNTs (A‐MWNTs) were used as reinforcing materials. The A‐MWNTs were purified by nitric acid treatment, which introduced the carboxyl groups (COOH) on the MWNT. The micrographs of the fractured surfaces of the nanocomposites showed that the A‐MWNTs in A‐MWNT/PCL were better dispersed than P‐MWNTs in PCL matrix (P‐MWNT/PCL). Percolation thresholds of the P‐MWNT/PCL and A‐MWNT/PCL, which were studied by rheological properties, were found at ～2 wt % of the MWNT. The conductivity of the P‐MWNT/PCL was between 10^?1 and 10^?2 S/cm by loading of 2 wt % of MWNT although that of the A‐MWNT/PCL reached ～10^?2 S/cm by loading of 7 wt % of MWNT. The conductivity of the P‐MWNT/PCL was higher than that of the A‐MWNT/PCL at the entire range of the studied MWNT loading, which might be due to the destruction of π‐network of the MWNT by acid treatment, although the A‐MWNT/PCL was better dispersed than the P‐MWNT/PCL. The amount of the MWNT at which the conductivity of the nanocomposite started to increase was strongly correlated with the percolation threshold. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1957–1963, 2007     

纳米分子筛/氧化铝复合材料的制备与表征

本文采用溶胶-凝胶法由自制的纳米分子筛和氧化铝制备纳米分子筛/Al2O3复合材料,做了制备纳米分子筛/Al2O3复合材料条件实验(如Al2O3凝胶浓度、煅烧温度、纳米分子筛和Al2O3配比等)。纳米分子筛/Al2O3复合材料进行了傅利叶变换红外光谱(FTIR)、X射线衍射仪(XRD)结构表征。测试了纳米分子筛/Al2O3复合材料的吸水率和吸油性,得出最佳吸水性和吸油性的制备条件。     

Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites

The electrical conductivity of oxidized multiwalled carbon nanotubes (MWNT)/epoxy composites is investigated with respect to the chemical treatment of the MWNT. The oxidation is carried out by refluxing the as-received MWNT in concentrated HNO₃ and H₂O₂/NH₄OH solutions, respectively, under several different treatment conditions. The oxidized MWNT are negatively charged and functionalized with carboxylic groups by both solutions. The MWNT oxidized under severe conditions are well purified, but their crystalline structures are partially damaged. It is recognized that the damage to the MWNT has considerable influence on the electrical properties of the MWNT composites, causing the electrical conductivity to be lowered at a low content of MWNT and the percolation threshold to be raised. The MWNT oxidized by the mixture of H₂O₂ and NH₄OH solution provides epoxy composites with a higher conductivity than those produced with the MWNT oxidized by nitric acid over the whole range of MWNT, independently of the oxidation conditions.     

Mechanical and thermal properties of polyphenylene sulfide/multiwalled carbon nanotube composites

Polyphenylene sulfide (PPS)/multiwalled carbon nanotube (MWCNT) composites were prepared using a melt‐blending procedure combining twin‐screw extrusion with centrifugal premixing. A homogeneous dispersion of MWCNTs throughout the matrix was revealed by scanning electron microscopy for the nanocomposites with MWCNT contents ranging from 0.5 to 8.0 wt %. The mechanical properties of PPS were markedly enhanced by the incorporation of MWCNTs. Halpin‐Tsai equations, modified with an efficiency factor, were used to model the elastic properties of the nanocomposites. The calculated modulus showed good agreement with the experimental data. The presence of the MWCNTs exhibited both promotion and retardation effects on the crystallization of PPS. The competition between these two effects results in an unusual change of the degree of crystallinity with increasing MWCNT content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and thermal properties of multiwalled carbon nanotube/polybenzoxazine nanocomposites

In this study, we prepared nanocomposites comprising multiwalled carbon nanotubes (MWCNTs) and polybenzoxazine (PBZ). The MWCNTs were purified through microwave digestion to remove most of the amorphous carbon and metal impurities. After purification, MWCNTs were treated with H₂SO₄/HNO₃ (3 : 1) to introduce hydroxyl and carboxyl groups onto their surfaces. Raman spectroscopy revealed the percentage of nanotube content improved after prolonged microwave treatment, as evidenced by the decrease in the ratio of the D (1328 cm^?1) and G (1583 cm^?1) bands. For the untreated MWCNTs, the I_D/I_G ratio was 0.56. After microwave treatment for 40 min, the value decreased to 0.29, indicating that the percentage of nanotube content improved. Dynamic mechanical analyses (DMAs) revealed that the storage moduli and the T_gs of the MWCNTs/PBZ nanocomposites were higher than that of the pristine PBZ. This is due to the nanometer‐scale MWCNTs restricting the motion of the macromolecular chains in the nanocomposites. Transmission electron microscopy (TEM) image revealed that the MWCNTs were well dispersed within the PBZ matrix on the nanoscale when the MWCNT content was less than 2.0 phr. The coefficient of thermal expansion (CTE) of the nanocomposites decreased on increasing the MWCNTs content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyester and multiwalled carbon nanotube composites: characterization,electrical conductivity and antibacterial activity

Poly(butylene terephthalate) (PBT) composites containing multiwalled carbon nanotubes (MWCNTs) were prepared using a melt‐blending process and used to examine the effects on the composite structure and properties of replacing PBT with acrylic acid‐grafted PBT (PBT‐g‐AA). PBT‐g‐AA and multihydroxyl‐functionalized MWCNTs (MWCNTs‐OH) were used to improve the compatibility and dispersibility of the MWCNTs within the PBT matrix. The composites were characterized morphologically using transmission electron microscopy, and chemically using Fourier transform infrared, solid‐state ¹³C NMR and UV‐visible absorption spectroscopy. The antibacterial and electrical conductivity properties of the composites were also evaluated. MWCNTs or MWCNTs‐OH enhanced the antibacterial activity and electrical conductivity of the PBT/MWCNT or PBT‐g‐AA/MWCNTs‐OH composites. The functionalized PBT‐g‐AA/MWCNTs‐OH composites showed markedly enhanced antibacterial properties and electrical conductivity due to the formation of ester bonds from the condensation of the carboxylic acid groups of PBT‐g‐AA with the hydroxyl groups of MWCNTs‐OH. The optimal proportion of MWCNTs‐OH in the composites was 1 wt%; in excess of this amount, the compatibility between the organic and inorganic phases was compromised. Copyright © 2011 Society of Chemical Industry     

Preparation and characterization of polydiphenylamine/multi‐walled carbon nanotube composites

We describe the synthesis of methane sulfonic acid (MeSA)‐doped poly(diphenylamine) (PDPA) with carboxylic groups containing multi‐walled carbon nanotubes (c‐MWNTs) via in situ polymerization. Diphenylamine monomers were adsorbed on to the surface of c‐MWNTs and polymerized to form PDPA/c‐MWNT composites. SEM and TEM images indicated two different types of materials: the thinner fibrous phase and the larger globular phase. The individual fibrous phase had a diameter around 100–130 nm, which should be the carbon nanotubes (diameter 20–30 nm) coated with a PDPA layer. The structure of PDPA/c‐MWNT composites was characterized by FTIR, UV‐visible spectroscopy and X‐ray diffraction patterns. The electrical conductivities of PDPA/c‐MWNT composites were much higher than that of PDPA without c‐MWNTs. Copyright © 2006 Society of Chemical Industry     

Preparation and characterization of carboxylated multiwalled carbon nanotube/polyamide composite nanofiltration membranes with improved performance

Polyamide thin‐film composite nanofiltration (NF) membranes were prepared via the interfacial polymerization (IP) process of piperazine and 1,3,5‐trimesoyl chloride on the polysulfone/nonwoven fabric ultrafiltration membrane surface. Carboxylated multiwalled carbon nanotubes (cMWNTs) were incorporated into the aqueous phase during the IP process to improve the membrane performance. The composition and morphology of the membrane surface were examined by means of attenuated total reflectance–Fourier transform infrared spectroscopy, scanning electron microscopy–energy dispersive spectrometry, and atomic force microscopy. The effects of the cMWNTs content on the membrane hydrophilicity, separation performance, and antifouling properties were characterized through water contact angle and crossflow filtration measurements. The experimental results show that membrane surface hydrophilicity, water permeability, salt rejection (R ), and antifouling properties all improved. In particular, when the cMWNTs content was 50 ppm, the magnesium sulfate R of the composite NF membrane reached a maximum value of 98.5%; meanwhile, the membrane obtained an obviously enhanced water flux (62.1 L m^?2 h^?1 at 0.7 MPa), which was two times larger than that of the original NF membrane. The modified NF membranes showed enhanced antifouling properties; this was mainly attributed to changes in the microstructures and surface features of the polyamide layer after the addition of the cMWNTs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45268.