Synthesis of CaWO4：Eu3＋ phosphor powders via ethylene glycol route and its optical properties

Eu3+ doped CaWO4 with tetragonal system were prepared at comparatively low temperature (125 ?C) in ethylene glycol medium. The phosphor was further investigated by X-ray diffractometer (XRD), photoluminescence spectrophotometer (PL), Fourier transform infra red (FT-IR) spectroscopy and transmission electron microscopy (TEM). XRD analysis indicated a decrease in the unit cell volume of CaWO4 with increasing Eu3+ ion concentration. It indicated the homogeneous substitution of Ca2+ ions in CaWO4 by the Eu3+ ions. TEM images showed that the particle size ranged from 20 to 200 nm and it could extend the application of the nanoparticles. The photoluminescence study showed that the intensity of electric dipole transition (5D0→7F2) at 614 nm dominated over the magnetic dipole transition (5D0→7F1) at 592 nm. The optimum concentration of Eu3+ for the highest luminescence was found to be 20 at.%. The as prepared samples were found to be dis-persible in water and methanol.     

Luminescence properties of a single-host phosphor Bal.8-wSrwLi0.4SiO4： cea＋,Eu2＋,Mn2＋ for WLED

In order to obtain a single-host-white-light phosphor,a series of Ba1.8-w-x-y-zSrwLi0.4-xCexEuyMnzSiO4(BSLS:Ce3+,Eu2+,Mn2+)powder samples were synthesized via high temperature solid-state reaction.The structure and photoluminescence properties were investigated.Under ultraviolet excitation,the emission spectra contained three bands:the 370-470 nm blue band,the 470-570 nm green band and the 570-700 nm red band,which arose from the 5d→4f transitions of Ce3+ and Eu2+,and the 4T1→6A1 transition of Mn2+,respectively.The excitation spectra of the emissions of Ce3+ and Mn2+ ions showed the energy transfer from Ce3+ to Mn2+.White light emission was obtained from the tri-doped samples of appropriate doping concentration under 310-360 nm excitation.     

Spectroscopic properties of Gd2Oa：Dy3＋ nanocrystals

Gd2O3:Dy3+ nanocrystals were synthesized via solvothermal method followed by a subsequent calcination.The samples were characterized by X-ray diffraction(XRD),transmission electron microsopy(TEM),Electronic dispersive X-ray spectroscopy(EDX),photoluminescence(PL)spectrum and decay curves.The effect of the annealing temperature on the crystallinity and particle size was studied;heat treatment improved the crystallinity of as-prepared nanocrystals as well as increased their particle size.The nanocryatals presented monodispersed spherical shape under TEM.Photoluminescence spectra showed that nanocrystal exhibited strong yellow emission corresponding to 4F9/2→6H13/2 transition(573 nm)of Dy3+ under UV light excitation,which broadened with the particle size decreased without structure changed.The theoretical mechanism of luminescence was explored and surface effect was thought to be the main reason.     

Luminescent properties of red phosphors K2Ba（MoO4）2：Eu3＋ for white light emitting diodes

K2Ba(MoO4)2:Eu3+ phosphors were synthesized by solid-state reaction. The emission and excitation spectra of K2 Ba(MoO4)2:Eu3+ phosphors exhibited that the phosphors could be effectively excited by near ultraviolet (394 nm) and blue (465 nm) light, and emitted red light at 616 nm. The influence of Eu3+concentration, sintering temperature and charge compensators (K+, Na+ or Li+ ) on the emission intensity were investigated. The results indicated that concentration quenching of Eu3+ was not observed within 30mol.% Eu 3+, 600 oC was a suitable sintering temperature for preparation of K2 Ba(MoO4)2:Eu3+phosphors, and K+ ions gave the best improvement to enhance the emission intensity. The CIE chromaticity coordinates of K2 Ba(MoO4)2:0.05Eu3+phosphor were calculated to be (0.68, 0.32), and color purity was 97.4%.     

Synthesis and luminescence properties of a novel red Sr3Bi（PO4）3：Sm^3＋ phosphor

A series of Sr3Bi1-x(PO4)3: xSm3+phosphors were prepared by solid state method at 1250 °C for 4 h. X-ray diffraction (XRD) indi-cated that the sample was of a pure phase of Sr3Bi(PO4)3. The main excitation peaks were located at 343 (6H5/2→4H9/2), 360 (6H5/2→4D3/2), 373 (6H5/2→6P7/2), 400 (6H5/2→4F7/2), 414 (6H5/2→6P5/2) and 467 nm (6H5/2→4I13/2). The main emission were located at 563 (4G5/2→6H5/2), 599 (4G5/2→6H7/2), 646 (4G5/2→6H9/2) and 708 nm (4G5/2→6H11/2). The intensest emission was excited by 400 nm. We studied the effect of differ-ent doping concentrations of Sm3+ activator on the luminescence properties and found that the luminescent intensity first increased with Sm3+ concentration increasing, and then decreased. The luminescent intensity had the best value when x=0.04. The chromaticity coordinates of the sample Sr3Bi0.96(PO4)3:0.04Sm3+ were (x=0.57, y=0.36), and the lifetime was 2.12 ms.     

Luminescent properties of MMgP_2O_7：Eu~（3＋）（M=Ca,Sr,Ba） phosphor

A series of red phosphors Eu3+-doped MMgP2O7(M=Ca,Sr,Ba) were synthesized by solid-state reaction method.X-ray powder diffraction(XRD) analysis confirmed the formation of pure CaMgP2O7,SrMgP2O7 and BaMgP2O7 phase.Photoluminescence spectra of MMgP2O7(M=Ca,Sr,Ba):Eu3+ phosphors showed a strong excitation peak at around 400 nm,which was coupled with the characteristic emission(350-400 nm) from UV light-emitting diode.The CaMgP2O7:Eu3+,SrMgP2O7:Eu3+ and BaMgP2O7:Eu3+ phosphors showed strong emission bands peaking at 612,593 and 587 nm,respectively.Due to the difference of the ion sizes between Ba2+(0.142 nm),Sr2+(0.126 nm),Ca2+(0.112 nm),Mg2+(0.072 nm) and Eu3+(0.107 nm),Eu3+ ions were expected to substitute for different sites in CaMgP2O7,SrMgP2O7 and BaMgP2O7 lattice.     

Luminescence properties of Mn2） ions doped Lu2CaMg2Si3O1） garnet phosphors

Yttrium aluminum garnet structure phosphors Lu2CaMg2Si3O12:Mn2+ were synthesized by conventional high temperature solid-state reaction in reductive atmosphere. The structure and optical properties of samples were characterized by application of powder X-ray diffraction (XRD) and photoluminescence spectroscopy. Results of X-ray diffraction (XRD) analysis showed that the phosphors mainly presented garnet structure with a few weak peaks of impurity phases. Lu2-xCaMg2Si3O12:xMn2+ (x=0.01-0.8) phosphors showed a broad emission band peaking at around 590 nm under ultraviolet (UV) light of 408 nm when Mn2+ concentration was less than 0.08 mol. With an increase in the Mn2+ concentration (above 0.08), another broad emission band peaking at 720 nm besides 590 nm was observed, which may be due to manganese ion having different valence and occupying different host lattice. The critical quenching concentrations of manganese ion in the wavelength of 590 and 720 nm were about 0.06 and 0.2 mol, respectively. With 408 nm excitation wavelength, emission color of the samples had a red shift trend as the Mn2+ concentration increased. All the results indicated that the Lu2CaMg2Si3O12:Mn2+ phosphors could be applicable to n-UV based white LEDs.     

Luminescence properties of Eu3＋ and Ho3＋ in SreTiO4

Eu3+ and Ho3+ doped Sr2TiO4 were synthesized by using solid-state reactions. Samples sintered at 1300 oC for 6 h could be indexed to Sr2TiO4 with a single phase. Eu3+ in Sr2TiO4 emitted orange light under the excitation at 365 nm in a broad band which was coupled well with the strongest emission of high pressure mercury vapor lamps. Ho3+ in Sr2TiO4 emitted yellow light under blue excitation from 450 to 460 nm which agreed well with the emission of blue InGaN-based light-emitting diodes. The present results indicated that Sr2TiO4 was a promising host for high pressure mercury vapor lamps or white light-emitting diodes.     

Factors affecting afterglow properties of red-emitting phosphor MgSiO3：Mn^2＋,Nd^3＋ for luminescent fiber

With stable physical properties,the rare-earth silicate phosphor of MgSiO3:Mn2+,Nd3+ is one of the suitable luminescent materials used in preparing functional fibers.In order to promote the afterglow properties of red-emitting phosphors,we prepared it by means of solid-state reaction,and the effect of manufacturing elements including H3BO3 and environmental factor of calcining temperature,type of flux on its luminescence property were investigated through evaluating their afterglow properties.The results showed that with the concentration of Nd 3+ increasing,the amounts of H3BO3 doping and calcining temperature,the afterglow time and initial brightness of the rare-earth silicate phosphor increased and then decreased gradually.The afterglow properties of different flux concentration were different from one to another as:H3BO3 >Na+>K+>No flux.     

Preparation and luminescence properties of Ce3＋/Dy3＋-codoped fluorosilicate glass ceramics

The Ce3+and Dy3+ co-doped fluorosilicate glass and glass ceramics containing SrF2 or CeF3 nanocrystals were prepared under re-ducing atmosphere. The precipitated nano-crystalline phase shifted from cubic SrF2 to hexagonal CeF3 gradually with the heat treatment tem-perature increasing from 620 to 680 °C. The glass and glass ceramics emitted white light, deriving from a combination of the Ce3+ blue and the Dy3+ yellow light. The CIE coordinates could be tuned by adjusting the ratio of Ce3+/Dy3+ concentration. The luminescence could be en-hanced significantly by annealing the samples at the temperatures lower than 640 °C.     

Combustion synthesis and luminescence properties of blue NaBaPO4:Eu2+ phosphor

The blue-emitting phosphor NaBaPO4:Eu2+ was prepared by the combustion method. The phase structure and microstructure of the as-prepared samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Under the excita-tion wavelength of 360 nm, the emission spectrum exhibited only one blue band centering at 435 nm, which was ascribed to the 4f65d1→4f7 transition on Eu2+ ions. Compared with the phosphor obtained by solid-state reaction method, the relative emission intensity of sample ob-tained by combustion method increased slightly. The decay times and the temperature dependence luminescence intensities (25-300 oC) were discussed in order to further investigate the potential applications. Furthermore, Eu2+-doped NaBaPO4 phosphor showed higher thermally sta-ble luminescence comparable to commercially available Y3Al5O12:Ce3+ (YAG:Ce3+) phosphor. All the investigated suggestions that Na-BaPO4:Eu2+ is a good phosphor candidate applied in white light emitting diode.     

Luminescence properties of Eu2＋ -doped Ba3Si6O12N2 green phosphor： concentration quenching and thermal stability

The efficient Eu2+ -doped Ba3 Si6O12N2 green phosphors were prepared by a traditional solid state reaction method under N2 /H2 atmosphere at a temperature up to 1350 oC for 12h. Photoluminescence (PL) properties showed a broad emission band with a peak of 525 nm and the full width of half-emission maximums (FWHM) of 70 nm under 460 nm light irradiation. The X-ray diffraction patterns (XRD) and scanning electron microscope (SEM) images of the synthesized powder demonstrated its pure phase and excellent crystallization. Quenching concentration in this phosphor was found to be 0.3. The mechanisms of concentration quenching and redshift of emission peak with increasing concentration of Eu2+ were studied. The temperature dependence measurement of this green phosphor revealed excellent thermal quenching property compared to silicate green phosphor. It is believed that Ba3 Si6O12N2 :Eu2+ is an excellent green phosphor for UV or blue chip based white LEDs.     

Synthesis and luminescence properties of SrAleO4：Eue＋,Dy3＋ hollow microspheres via a solvothermal co-precipitation method

SrAl2O4:Eu2+,Dy3+ hollow microspheres were successfully prepared through a facile and mild solvothermal co-precipitation combining with a postcalcining process.The structure and particle morphology were investigated by X-ray diffraction(XRD),scanning and transmission electron microscopy(SEM and TEM)pictures,respectively.The mechanism for the formation of spherical SrAl2O4:Eu2+,Dy3+ phosphor was preliminary presented.After being irradiated with ultraviolet(UV)light,the spherical phosphor emitted long-lasting green phosphorescence.Both the photoluminescence(PL)spectra and luminance decay,compared with that of commercial bulky powders,revealed that the phosphors had efficient luminescent and long lasting properties.It was considered that the SrAl2O4:Eu2+,Dy3+ hollow microspheres had promising long-lasting phosphorescence with potential scale-dependent applications in photonic devices.     

Broadband downconversion in YVO4：Tm3＋,Yb3＋ phosphors

An efficient near-infrared (NIR) downconversion (DC) by converting broadband ultraviolet (UV) into NIR was demonstrated in YVO4:Tm3+,Yb3+ phosphors. The phosphors were extensively characterized using various methods such as X-ray diffraction, photoluminescence excitation, photoluminescence spectra and decay lifetime to provide supporting evidence for DC process. Upon UV light varying from 260 to 350 nm or blue light (473 nm) excitation, an intense NIR emission of Yb3+ corresponding to transition of 2F5/2→2F7/2 peaking at 985 nm was generated. The visible emission, the NIR mission and the decay lifetime of the phosphors of various Yb3+ concentrations were investigated. Experimental results showed that the energy transfer from vanadate group to Yb3+ via Tm3+ was very efficient. Application of the broadband DC YVO4:Tm3+,Yb3+ phosphors might greatly enhance response of siliconbased solar cells.     

Photoluminescence properties of Ce3+ doped YSiO2N blue-emitting phosphors

Oxonitridosilicate phosphors with compositions of Y 1-x Ce x SiO 2 N (x=0-0.1) were synthesized by a new synthetic route based on a solid state reaction among YSi, CeSi, SiO 2 and Y 2 O 3 compounds at high temperature and high pressure. The photoluminescence properties dependent on Ce concentration and temperature were investigated. Concentration quenching occurred when the doped Ce 3+ concentration was more than 3 mol.%. The emission spectra showed red shifts from 430 to 447 nm with the increased Ce concentration from 0.5 mol.% to 10 mol.%. The quenching temperature was estimated as ～380 K. The chromaticity coordinates of the excitation and emission spectra were stable against the temperature. This study showed these YSiO 2 N:Ce 3+ phosphors the potential applications in the three-RGB phosphor-converted white LEDs.     

Luminescence properties of composite material Sr2MgSi2O7:Eu2+,Dy3+/light conversion agent with multilayer structure

In order to improve the red luminescent properties,Sr₂ MgSi₂ O₇:Eu²⁺,Dy³⁺was selected as a blue persistent luminescent donor phosphor,while light conversion agent was utilized to tune the persistent luminescent spectra from blue to red.Composite red luminescent material Sr₂ MgSi₂ O₇:Eu²⁺,Dy³⁺/light conversion agent(SMED/LCA) was fabricated with light conversion agent and Sr₂ M...     

Effects of crystal field on photoluminescence properties of Ca2Al2SiO7:Eu2+ phosphors

A series of single-phased Ca₂Al₂SiO₇:Eu²⁺ phosphors were synthesized by the solid-state reaction. Their structure and photolumi-nescence properties were investigated by the X-ray powder diffraction （XRD） and excitation and emission spectra in detail. The emission spectra of Ca₂Al₂SiO₇:Eu²⁺ phosphors consisted of blue and green band located at419 and542 nm, respectively. The relative intensities of the blue and green emission changed with Eu²⁺ concentration and were sensitive to the excitation wavelength. The unique photoluminescence property originated from the 4f⁷→4f⁶5d transition of Eu²+ at different energy levels, on which the effect of the crystal field strength was con-sidered to be tailed by adjusting the host composition.