共查询到20条相似文献,搜索用时 93 毫秒
1.
提出利用FANUC系统辅助功能与PMC功能对加工中心机床旋转分度工作台进行数字化控制的新方法。根据零件的多工序加工工艺要求,制订分度台分度控制方案,对辅助功能进行开发,设计PMC控制程序对CNC代码进行译码和逻辑运算,完成CNC与分度台的信息交换,在低成本投入的基础上,实现用CNC程序对旋转工作台进行分度控制的目的。 相似文献
2.
作为FANUC系统的附加功能,PMC轴能独立于CNC轴,具有控制灵活、没有硬件限制的特点。讨论了FANUC PMC轴功能在数控喷丸机中对数控回转工作台的控制方法和应用实例。分析回转工作台的控制方案,给出了数控系统硬件连接图。根据回转工作台的具体控制要求,阐述了PMC轴控制的关键步骤,列出了相关的程序流程图,并给出了部分控制梯形图。 相似文献
3.
每当数控机床出现故障时,维修人员往往都会首先观察CRT上显示的报警提示,借助于检查PMC的工作状态信息窗口进行诊断,或通过对梯形图的动态分析来确定故障发生的部位。但是,当CRT出现黑屏时,维修人员在排除故障中就会失去“眼睛”,使排故变得棘手。为此,下面根据笔者的维修经验及有关资料,就CRT出现黑屏时如何排故提出一些方法,供大家参考。1 CRT黑屏故障的表现形式1·1机床电源接通后,CRT及伺服单元无任何显示,机床不能进行任何动作。这多半是由于:a·电源侧故障;b·CNC主板电源线路故障。1·2机床电源接通后,CRT无显示,但输入单… 相似文献
4.
5.
以牧野MAKINO A92卧式加工中心为例,说明开放式数控系统的PMC伺服轴控制刀库的故障诊断与维修方法。 相似文献
6.
范业鹏 《组合机床与自动化加工技术》2008,(9)
介绍了一种在嵌入式系统中开发的车床数控系统的PMC控制模块的设计方法.实现了PMC指令编程和梯形图任意方式编辑PMC程序,高速PMC和低速PMC扫描运算等所有常用的PMC功能.文中讨论了该车床数控系统的工作原理、硬件组成和PMC功能软件设计思想. 相似文献
7.
采用PMC程序和宏程序相结合的方法控制配备FANUC 0i-MD系统加工中心的凸轮式刀库,详细介绍刀库I/O接线图、随机换刀PMC程序和宏程序.该控制方法设计合理,使用方便,稳定可靠,对同类加工中心设计调试具有借鉴作用. 相似文献
8.
机床数据是数控系统与机床以及伺服驱动之间匹配的媒介,是数控机床能否发挥其工作性能的关键。维修人员了解机床数据的作用和保护方法是保证数控机床正常工作的前提条件。针对西门子SINUMERIK 802D数控系统的数据备份与恢复方法进行总结,系统介绍了SINUMERIK 802D数控系统内部存储器结构、数据的内部备份和外部备份方法。 相似文献
9.
10.
结合卧式加工中心数控系统内置PLC软件的设计,给出了NC、PMC和机床侧逻辑信号之间的关系以及PMC软件的总体结构;介绍了报警程序的构建、报警信息显示和故障诊断方法,通过合理设计报警软件和报警提示信息,实现了故障的正确诊断。 相似文献
11.
12.
13.
14.
A. A. Babakov 《Metal Science and Heat Treatment》1967,9(10):764-770
Conclusions Highly alloyed steels and alloys are produced in conformity with GOST or technical specifications in thick and thin sheets, beams and channels, bars, hot-rolled and cold-rolled pipe, and rod. Castings are produced in the specialized plant of the Ministry of Chemical and Petroleum Machine Building.The technology of welding stainless steels and alloys is given in [15] and [16].TsNIIChERMET. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 10, pp. 43–50, October, 1967. 相似文献
15.
模具渗硼工艺及其发展应用 总被引:4,自引:0,他引:4
渗硼是提高模具使用寿命的重要途径,是在金属表面形成高硬度的金属硼化层,显著提高其耐磨性,且具有良好的耐热性和耐蚀性。近年来,随着渗硼工艺逐步改进和完善,已发展了复合渗、多元共渗及低温渗硼工艺,取得了良好的经济效果。 相似文献
16.
17.
《稀有金属材料与工程》2006,23(4):23-26
结合近年来现场试验与施工实践,分析研究了中小型镍材(工业纯镍)设备与管道的特点、性能、焊接缺陷与产生原因,以及防止与消除其缺陷、优化制造施焊质量的工艺措施,并总结了若干条注意事项。 相似文献
18.
19.
A. Yu. Tsivadze G. V. Ionova V. K. Mikhalko 《Protection of Metals and Physical Chemistry of Surfaces》2010,46(2):149-169
The possibility of using unique properties of lanthanides in the nanotechnology is demonstrated. The origination of linear
and nonlinear optical properties of lanthanide compounds with phthalocyanines, porphyrins, naphthalocyanines, and their analogs
in solutions and condensed state and the prospects of obtaining novel materials on their basis are discussed. Based on the
electronic structure and properties of lanthanides and their compounds, namely, optical and magnetic characteristics, electronic
and ionic conductivity, and fluctuating valence, molecular engines are classified. High-speed storage engines or memory storage
engines; photoconversion molecular engines based on Ln(II) and Ln(III); electrochemical molecular engines involving silicate
and phosphate glasses; molecular engines whose operation is based on insulatorsemiconductor, semiconductor-metal, and metal-superconductor
types of conductivity phase transitions; solid electrolyte molecular engines; and miniaturized molecular engines for medical
analysis are distinguished. It is shown that thermodynamically stable nanoparticles of Ln
x
M
y
composition can be formed by d elements of the second halves of the series, i.e., those arranged after M = Mn, Tc, and Re.
Prospects of using lanthanide superconductors in nanotechnology are considered. 相似文献