Direct extraction of Mo(Ⅵ) from sulfate solution by synergistic extractants in the rotation column

Direct extraction of molybdenum from sulfate solution with synergistic extractants(mixture of D_2EHPA and TBP)was studied in the rotation column. The influence of extractant concentration and initial pH of aqueous phase was studied in the bench scale experiments. The outcomes demonstrated that the synergistic solvent extraction enhances the constancy of the extracted complexes for transfer into the organic phase. In the continuous experiments, the effect of different operating parameters such as speed of agitation, inlet solvent flow rate and inlet aqueous flow rate on the holdup, mean drop size, drop size distribution, slip and characteristic velocities and extraction percentage were examined. Modified correlations were proposed for prediction of hydrodynamic parameters with consideration of reaction extraction condition in the rotation column. Furthermore, these correlations were compared with the experimental data. According to the results, the direct extraction of Mo(Ⅵ) from aqueous solution and sulfuric media with extraction efficiency of 90.4% was obtained at higher rotor speed(240 r·min~(–1) rpm) in this column.     

A STUDY ON SUPERCRITICAL FLUID EXTRACTION OF L-PROLINE

The extraction of L-proline from the fermentation broth filtrate with the supercritical fluid was studied. It has been proved that L-proline and most amino acids are hardly dissolved in the pure supercritical carbon dioxide fluid. When the methyl alcohol was added as an entrainer in L-proline solution or carbon dioxide fluid, the solubility of L-proline in the supercritical fluid would be greatly increased, but ethyl alcohol was unsatisfactory as an entrainer.The influences of extraction pressure, temperature, time, flow rate of fluid, concentrations of L-proline and entrainer on the yield of L-proline have been investigated for searching the optimal extraction conditions.     

大孔吸附树脂精制鱼腥草黄酮类化合物

Flavonoids are one main kind of effective components in Houttuynia cordata Thunb., which display a wide range of pharmacological activity. In this study supercritical fluid extraction （SFE） with carbon dioxide was first used as preparat ion step to remove the volatile components, which are also active components, from Hout-tuynia cordata Thunb. Then ultrasound-assisted extraction was used to obtain the crude flavonoids and the macro-porous resin adsorption technology was further employed to purify the flavonoids. Nine kinds of macroporous resins with different properties were tested through static adsorption, and one macroporous resin labeled as D101 was selected. The effect of several factors, such as the ratio of column height to diameter, initial concentration and pH, on both flavonoids yield and content were explored by dynamic adsorption to obtain reasonable conditions of adsorption and desorption. The experimental results show that the content of fiavonoids can be above 60% with fia- vonoids recovery of 93.3 % under the optimum conditions of purification. HPLC analysis of the final flavonoids product shows it contains quercitrin, hypefin, rutin and quercetin.     

BREAKAGE AND COALESCENCE RATES OF DROPLETS IN KARR COLUMNS

Breakage and coalescence rates of droplets in reciprocating plate extraction columns were investigated bystep change in mixing intensity.Mean drop size was measured by laser light transmission technique combinedwith measurement of local holdup.Batch and countercurrent flow experiments with and without mass transferoccurring show that the dispersion mechanisms are different.The Monte Carlo simulation by digital computerwas used to treat the experimental data and models of breakage and coalescence rates were obtained.     

α-细辛醚在超临界CO2中溶解度的测定和计算

Solubility of α -asarone in supercritical carbon dioxide was measured and calculated by P-R equation and Chrastil method. Compared with experimental data, the average relative deviation of the calculated solubility of α -asarone is 25% and 8% for P-R equation and Chrastil method respectively,which indicates that the experimental results can be correlated well with Chrastil method.The Chrastil equation for the solubility of α -asarone in supercritical carbon dioxide was subsequently given, which can be applied to the prediction of solubility according to the practical supercritical conditions.     

散相液滴在搅拌萃取塔内的停留时间分布

A resident time model is proposed to evaluate the performance of agitated extraction columns. In this model, the resident time of dispersed drops is simulated with the discrete phase modeling, where the continuous phase and the dispersed phase （drops） are described by the single-phase Navier-Stokes （turbulence） model and Lagrangian model, respectively. The interaction of dispersed phase and continuous phase is neglected for the low concentration of drop in the cases studied. The statistical parameters of drops （the average resident time and standard deviation） under different operation conditions are computed for four columns. The relation of the above statistical parameters with the performance of columns is discussed and the criterions for an optimal compartment are outlined. Our results indicate that the resident time model is useful to evaluate the performance and optimize the design of extraction columns.     

GRAVITY SETTLING OF DISPERSED PHASE DROP SWARMS IN EXTRACTION COLUMNS IN ABSENCE OF MASS TRANSFER

Taking into account the effect of velocity profiles of the continuous phase in interstices of drops,dragcoefficient and relative motion correlations for dispersed liquid-liquid two-phase flow in absence of mass transferwere developed in terms of the pseudo-fluid concept based on the simple similarity criteria and the mixtureviscosity model suggested by Ishii and Zuber.The present model was compared with the experimental data fromfive(different sources and also with seven other pertinent correlations available in literature.Fairly goodpredictions were obtained under wide ranges of the dispersed phase holdup and Reynolds number.The validity ofthe present model has also been checked against the experimental slip velocity data and holdup data obtained ina Karr reciprocating plate extraction column by the author of the present paper and satisfactory agreement isachieved、The results show that the equations of the motion of a multi-droplet system can be formulated in aform identical with those for a single dr     

规整填料塔内两相流动的三维计算流体力学建模(英文)

Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed two-phase flow inside the columns. The present paper presents a three-dimensional computational fluid dy- namics （CFD） model to simulate the two-phase flow in a representative unit of the column. The unit consists of an CFD calculations on column packed with Flexipak 1Y were implemented within the volume of fluid （VOF） mathe- matical framework. The CFD model was validated by comparing the calculated thickness of liquid film with the available experimental data. Special attention was given to quantitative analysis of the effects of gravity on the hy- drodynamics. Fluctuations in the liquid mass flow rate and the calculated pressure drop loss were found to be quali- tatively in agreement with the experimental observations.     

Experimental and Numerical Investigations of Single Drop Mass Transfer in Solvent Extraction Systems with Resistance in Both Phases

Numerical simulation of transient mass transfer to a single drop controlled by the internal resistance or by the resistance in both phases was mathematically formulated and simulated in a boundary-fitted orthogonal coordinate system. The simulated results on the transient mass transfer dominated by the internal resistance are in good agreement with the Newman and Kronig-Brink models for drops with low Reynolds number. When the drop Reynolds number is up to 200, the mass transfer coefficient from numerical simulation is very low as compared with the Handlos-Baron model. The cases with mass transfer resistance residing in both the continuous and drop phases were simulated successfully and compared with the experimental data in three extraction systems recommended by European Confederation of Chemical Engineering (EFCE). For single drops with Re < 200, the numerically predicted values of the extraction fraction and overall mass transfer coefficient are in reasonable coincidence with the experimental data. I     

超临界 CO2萃取辣椒籽油的动力学研究简

A mathematical model for extraction of red pepper seed oil with supercritical CO2 was proposed. Some factors influencing the process were investigated, including operation pressure, temperature and extraction yield Xe （%）. The model was solved by the method of weighted residuals and used to simulate the process numerically. The kinetic equation is expressed as Xe =-16.8606exp（-t/9.98177） ＋ 16.95457 and the simulation results are in excellent agreement with the experimental data. The optimal operating parameters are 30 MPa, 318 K and 60 min.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Novel polyurethane coating technology through glycidyl carbamate chemistry

Glycidyl carbamate chemistry combines the excellent properties of polyurethanes with the crosslinking chemistry of epoxy resins. Glycidyl carbamate functional oligomers were synthesized by the reaction of polyfunctional isocyanate oligomers and glycidol. The oligomers were formulated into coatings with several amine functional crosslinkers at varying stoichiometric ratios and cured at different temperatures. Properties such as solvent resistance, hardness, and impact resistance were dependent on the composition and cure conditions. Most coatings had an excellent combination of properties. Studies were carried out to determine the kinetics of the curing reaction of the glycidyl carbamate functional oligomers with multifunctional and model amines. Detailed kinetic analysis of the curing reactions was also undertaken. The results indicated that the glycidyl carbamate functional group is more reactive than a glycidyl ether group. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, on October 27–29, 2004, in Chicago, IL.     

Highly moisture-proof polysilsesquioxane coating prepared via facile sol-gel process

A highly moisture-proof polysilsesquioxane coating was obtained from a new bis-silylated precursor, which was synthesized from 3-aminopropyltriethoxysilane (APTES) and m-xylylene diisocyanate (m-XDI) in tetrahydrofuran (THF) and verified by ¹H MAS NMR. For direct comparison purposes, an SiO₂ coating was also prepared by the Stöber method using tetraethoxysilane (TEOS) as the reactant. Interestingly, the coating obtained from the polysilsesquioxane sol exhibited a much higher moisture resistance capability than its counterpart, which was attributed to its more compact feature between nanoparticles as characterized by N₂ absorption experiment and transmission electron microscopy (TEM). Furthermore, its high transparency of about 92% showed potential for application in the protection of optical crystals.