周期操作全回流间歇精馏的动态模型(英文)

Cyclic total reflux (CTR) batch distillation is a promising mode of the process but lacking of appropriate modeling for the period of filling the reflux drum. A new dynamic modeling method for the simulation of CTR batch distillation is proposed in this work, in which the changes in column holdup and liquid flow rate during the filling of the drum, and the consequent change in valid number of theoretical plates are considered. The effect of drum holdup on operation time is investigated and the optimal drum holdup is obtained from the simulation. The dynamic modeling is compared to the conventional modeling without consideration of change in liquid flow rate. The experimental result shows that the present modeling is more reliable and more accurate, especially for the col-umn with large liquid holdup.     

Soft-sensing modeling and intelligent optimal control strategy for distillation yield rate of atmospheric distillation oil refining process

It is a challenge to conserve energy for the large-scale petrochemical enterprises due to complex production process and energy diversification. As critical energy consumption equipment of atmospheric distillation oil refining process, the atmospheric distillation column is paid more attention to save energy. In this paper, the optimal problem of energy utilization efficiency of the atmospheric distillation column is solved by defining a new energy efficiency indicator — the distillation yield rate of unit energy consumption from the perspective of material flow and energy flow, and a soft-sensing model for this new energy efficiency indicator with respect to the multiple working conditions and intelligent optimizing control strategy are suggested for both increasing distillation yield and decreasing energy consumption in oil refining process. It is found that the energy utilization efficiency level of the atmospheric distillation column depends closely on the typical working conditions of the oil refining process, which result by changing the outlet temperature, the overhead temperature, and the bottom liquid level of the atmospheric pressure tower. The fuzzy C-means algorithm is used to classify the typical operation conditions of atmospheric distillation in oil refining process. Furthermore, the LSSVM method optimized with the improved particle swarm optimization is used to model the distillation rate of unit energy consumption. Then online optimization of oil refining process is realized by optimizing the outlet temperature, the overhead temperature with IPSO again. Simulation comparative analyses are made by empirical data to verify the effectiveness of the proposed solution.     

内部热耦合精馏塔基于非理想物系的最优评价

Internal thermally coupled distillation column(ITCDIC) is a frontier in energy saving distillation research. In this paper, the optimal assessment on the energy saving and the operating cost for ITCDIC of nonideal mixture is explored. An evaluating method is proposed, and the pertinent optimization model is then derived. The ethanol-water system is studied as an illustrative example. The optimization results show that the maximum energy saving in ITCDIC process is about 35% and the maximum operating cost saving in ITCDIC process is about 30%,as compared with a conventional distillation column(CDIC) under the minimum reflux ratio operating; the optimal operating pressure of the rectifying section is found to be around 0.25 MPa; the effects of the feed composition,operating pressure and the heat transfer rate on operation are also found and analyzed. It is revealed that ITCDIC process possesses high energy saving potential and promising economical prospect.     

间歇提馏塔的操作

A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed to be the same as those of a rectifier. However, the control system of a stripper is different. In this paper, we explore three different control methods with Hysys (Hyprotech Ltd. 1997) for a batch stripper. The main difference is the control scheme for reboiler liquid level: (a) controlled by reflux flow; (b) controlled by reboiler heat duty; (c)controlled by bottom product flow. The main characteristics of operating a batch stripper with different control scheme are presented in this paper. Guidelines are provided for the startup of a batch stripper, the effects of some control tuning parameters on the column performance are discussed.     

高纯度精馏过程的集成控制与在线优化策略

For high-purity distillation processes, it is difficult to achieve a good direct product quality control using traditional pro-portional-integral-differential (PID) control or multivariable predictive control technique due to some difficulties, such as long re-sponse time, many un-measurable disturbances, and the reliability and precision issues of product quality soft-sensors. In this paper, based on the first principle analysis and dynamic simulation of a distillation process, a new predictive control scheme is proposed by using the split ratio of distillate flow rate to that of bottoms as an essential controlled variable. Correspondingly, a new strategy with integrated control and on-line optimization is developed, which consists of model predictive control of the split ratio, surrogate model based on radial basis function neural network for optimization, and modified differential evolution optimization algorithm. With the strategy, the process achieves its steady state quickly, so more profit can be obtained. The proposed strategy has been successfully applied to a gas separation plant for more than three years, which shows that the strategy is feasible and effective.     

分批精馏过渡段放持液操作方式

The new mode of operation for slop cut withdrawal in batch distillation, i.e., draining Column liquid holdup at the end of slop cut period, was proposed. And the stopping criterion for the operation was investigated, Experiments were carded out with isopropanol-n-propanol binary system and isopropanol-n-propanol-n-butanol ternary system in a distillation column with a liquid collector installed between the reboiler and the column section, Experimental results in a Ф 45mm batch column show that the proposed policy can overcome the flywheel effect caused by column liquid holdup and thus cut down operation time and energy consumption 31%-61%.     

工业流化床乙烯共聚合生产过程中牌号切换的最优化研究

A model of grade transition is presented for a commercialized fluidized bed gas-phase polyethylene production process.The quantity of off-specification product and the time of grade transition can be minimized by the optimization of operating variables,such as polymerization temperature,the ratio of hydrogen to ethylene,the ratio of co-monomer to ethylene,feed rate of catalyst,and bed level.A new performance index,the ratio of melt flow(MFR),is included in the objective function,for restraining the sharp adjustment of operation variables and narrowing the distribution of molecular weight of the resion.It is recommended that catalyst feed rate and bed level are decreased in order to reduce the grade transition time and the quantity of off-specification product.This optimization problem is solved by an algorithm of sequential quadratic programming (SQP) in MATLAB. There is considerable difference between the forward transition and reverse transition of grade with regard to the operating variables due to the non-linearity of the system.The grade transition model is extended to a high space time yield(STY)Process with the so-called condensed model operation.In the end,an optimization strategy for multi-product transition is proposed with two-level optimization of the objective function J(x,u) on the the basis of the optimal grade transition model.A sequential transition of six commercial polyethylene grades in illustrated for an optimal multi-product operation.     

MASS TRANSFER IN MEMBRANE ABSORPTIONDESORPTION OF AMMONIA FROM AMMONIA WATER

Hydrophobic membrane can provide fast mass transfer for absorption-desorption of gasesform liquid to absorbent.The removal of ammonia from ammonia water and absorption with dilutesulphuric acid was studied in a pilot plant with polypropylene hollow fiber column,The removalrate and influences of operation temperature,flow rate and concentration on mass transferperformances were discussed mathematically.Experimental results and computer calculation show thatthe ammonia removal rate is not affected by the feed concentration for a given system.Both partialand overall mass transfer coefficients vary along the axis of the fiber,and the mass transfer for themembrane process is controlled by membrane resistance.     

周期全回流间歇精馏中全采出操作时的塔顶浓度平台期(英文)

The total withdrawal operation is an inevitable section in cyclic total reflux batch distillation.In the operation,an interesting phenomenon "overhead concentration platform"(OCP) appears,which is defined as a period of time with high overhead concentrations when the operation is changed from total reflux to total withdrawal.The OCP phenomenon and its influential factors,such as the theoretical stage number,feed concentration,and feed composition,are examined by simulations and experiments.The experimental equipment is a column with random packings.It is shown that the number of theoretical stages influences the OCP more significantly than the other factors.     

Total Reflux Operation of Multivessel Batch Distillation for Separation of Binary Mixtures

Multivessel batch distillation （MVBD） is mainly used to separate mixtures with more than two compo-nents. In this article, a new operation mode with MVBD is proposed for separation of binary mixtures under total reflux. A mathematic model is setup for the simulation. The proposed operation policy and the regular operation with constant reflux are compared theoretically and experimentally. The results show that the new operation mode has great advantages in time saving and operation flexibility. MVBD presents great potential for separation with high efficiency.     

浓度极稀物中回收微量重组分的精馏操作策略-准间歇精馏

A new operation policy-quasi-batch distillation for recovering infinitesimal amounts species existing in a mixture is presented. In quasi-batch distillation operation, feed is introduced with a constant flow rate onto the feed stage of the column, and the flow rate of the distillate is the same as that of the feed, whereas the bottom product is withdrawn periodically. The behavior of quasi-batch distillation is simulated and analyzed through an example on heavy water separation. Comparing with continuous or batch distillation, the new operation policy is more reliable and efficient to achieve higher recovery of dilute component. This is especially suitable for separating small amount of precious species from large amount of raw material.     

Falling film distillation column with heat transfer by means of a vapor chamber – part I: isothermal operation

We describe a new configuration for falling film distillation columns: a heating system provided by a vapor chamber along the entire column with the operation at atmospheric pressure. Experimental tests were carried out with an ethanol–water mixture by providing isothermal while varying the feed flow rate and the temperatures of the feed and vapor chamber. This heating proposal allowed the formation of a temperature gradient inside the distillation column, which was attributed to the mass and heat axial transfer that occurred along the entire length of the unit. Different from the usual recommendation for film units, higher flow rates are more suitable for distillation of ethanol and water, which was attributed to the heat transfer method and the operation being held at atmospheric pressure. Also, it was observed that there is a strong relationship between the feed temperature and vapor chamber temperature. The results are promising and encourage further studies with this new heat transfer proposal.     

分子蒸馏技术提纯帕罗西汀碱

应用刮膜式分子蒸馏装置对帕罗西汀的提纯进行了研究。考察了多种分离工艺参数对帕罗西汀质量分数、纯度和馏出率的影响。得到了分子蒸馏技术提纯帕罗西汀的最适宜工艺条件:进料速度60 mL/h,进料温度80℃,蒸发温度163℃,蒸发压力0.1 Pa。通过对该生产过程技术经济的初步分析,以年产1000 kg帕罗西汀计算,可产生利润约7000万元。     

乙酸甲酯与甲醇共沸物催化精馏水解工艺

以乙酸甲酯与甲醇共沸物为原料,采用阳离子交换树脂为催化剂,研究了乙酸甲酯催化精馏水解工艺。在实验中以捆扎包作为催化剂的装填方式,系统地研究了催化精馏段和提馏段的高度、进料位置、进料中含甲醇、水酯物质的量比、回流进料比和空速等对酯分解率的影响,获得了最佳的工艺条件。分析了传统的水解分离工艺,提出了可行的新工艺。在最佳工艺条件下,新工艺系统的能耗比传统的固定床工艺降低39.99%。     

热集成变压精馏乙二醇脱水系统的控制方案优化

针对热集成变压精馏乙二醇脱水再生系统存在的操作不稳定等问题,基于Aspen Plus和Aspen Dynamics软件,在全流程稳态模拟的基础上,对其进行了动态模拟及控制方案优化。设计了改进型控制方案CS2,与常规控制方案CS1相比,两个塔的操作压力的控制回路是相互独立的,高压塔的塔釜液位由再沸器的导热油流量控制,低压塔的塔釜温度由塔釜的采出流量控制,再分别对进料流量和进料组成中乙二醇含量的阶跃变动的动态响应特性进行分析。结果表明,控制方案CS1基本能够抵抗进料流量和进料组成扰动对系统的影响,但相关控制响应会出现一定的滞后性,难以保证产品满足要求。改进的控制方案CS2对相同的进料流量和进料组成扰动有更好的抵抗能力,控制性能显著提高,保证乙二醇的质量分数不低88%,趋于稳定时产品质量变化幅度小于2%,且该方案在实际应用中涉及到的操作相对简单。本文为相关双塔耦合过程的稳定控制提供了一种新思路,对于双塔耦合在其他体系的工程应用也有借鉴作用。     

Falling film distillation column with heat transfer by means of a vapor chamber. Part II: operation with a temperature profile

Based on previous results and a new proposal for the configuration of falling film distillation columns heated by a vapor chamber operating at atmospheric pressure, the present study analyzed a different application for heat transfer by means of an the axial temperature profile in the same vapor chamber, generated by the presence of non-condensable gases. Experimental tests were performed with an ethanol–water mixture by varying the feed flow rate and vapor chamber temperature. This new heat transfer proposal allowed the formation of a temperature gradient inside the distillation tube (similarly to the isothermal proposal previously reported), thus indicating that this heat transfer method is feasible for a distillation unit. The results demonstrated that higher flow rates are suitable for the distillation of ethanol and water in this new proposal; the temperature profile operation shows the feasibility of this new heat transfer proposal in falling film distillation columns and encourages further studies on the optimization of the process and the evaluation of the energy consumption.     

Understanding and enhancing the direct contact membrane distillation performance by modified heat transfer correlation

The sensitivity of direct contact membrane distillation to feed temperatures and feed flow rate is investigated experimentally. At very low flow rates, the process becomes heat transfer limited where the thermal energy of the aqueous feed solution is lost by the conduction resistance minimizing the distillate production. At high flow rates, the film heat transfer coefficient for both liquid solutions increases, creating a larger temperature difference across the membrane boundaries. Hence, the mass fluxes increase linearly with the water flow rate. These findings are also assessed by simulating the heat and mass transfer equations that describe the membrane distillation (MD) thermo-physical operation. It is found that the underlying physics of the MD module must faithfully capture and explain the true process behaviour. Hence, a modified correlation for the Nusselt number is developed and tested.     

Optimal operation of distillation processes under uncertain inflows accumulated in a feed tank

A new method of optimizing the operation of distillation processes with uncertain inflow streams from upstream plants is discussed. The case considered is the streams that will be first accumulated in a tank before feeding to the column. To minimize the total amount of operating energy while keeping a stable column operation under these inflows, a novel decomposed optimization strategy consisting of two steps was used. For an optimal planning of the dynamic operation, a smooth feed flow policy to the column is developed in the first step by stochastic optimization under chance constraints by ensuring a predefined probability of holding the tank level inside the desired range. An easy-to-use method developed computes the maximum reachable probability of holding the constraints so that a feasible solution of the chance constrained problem can be guaranteed. Since the uncertainty in the inflow stream variability is absorbed in the stochastic optimization over the tank, the operation of the dowstream distillation column is deterministic. Therefore, in the second step, the reflux and reboiler duty policies of the column are developed by deterministic dynamic optimization. The optimal overall strategy is obtained by the maximized smoothness of the feed flow to the distillation column. The approach is applied to a pilot column, and the developed operating policies are implemented on the real plant by experiment.     

分子蒸馏技术提纯茄尼醇的工艺研究

分子蒸馏技术是一种在高真空条件下进行的连续蒸馏过程,适合于分离高沸点、高粘性、热敏性及具有生物活性的混合物.应用刮膜式分子蒸馏装置对茄尼醇的提纯进行了研究,实验过程中茄尼酵粗品不需要进行脱色等方法预处理,通过两次分子蒸馏,即可得到高纯度茄尼醇.考察了多种分离工艺参数对茄尼醇纯度和收率的影响.得到了用分子蒸馏技术提纯茄尼醇的最佳工艺条件:进料速度350-400 mL·h-1,进料温度100℃,蒸馏温度为200～220℃,蒸发压力为10 Pa,刮膜器转速300～400 r·min-1,最终产品纯度和收率分别达到97.6%和 77.1%,达到了用分子蒸馏分离茄尼醇的目的,说明采用分子蒸馏设备提纯茄尼醇粗品是可行的.     

Undergraduate design of experiment laboratory on analysis and optimization of distillation column

A two-level full factorial design and/or a central composite design are used to optimize the operation of a distillation column by manipulating three variables: the feed flow rate, the reflux ratio and the steam flow to the reboiler. The response variable of interest is a profit function where the objective of this experiment is to examine the effect of each of the three factors and their interactions on this profit function. This is accomplished in a sieve tray type continuous distillation column operated at ambient pressure to separate a methanol–isopropanol mixture. Students were asked to determine the significant variables and the optimal operating conditions for steam rate, reflux ratio and feed rate such that the profit is maximized. As a result, this experiment not only exposes students to an industrially relevant unit operation but it also helps complement the classroom teaching on design of experiment concepts.