厚膜铂电阻测温元件的研制

本文重点总结了作者所进行的厚膜铂电阻测温元件研制过程和所取得的成果。该产品性能符合国家专业标准ZBY301-85的要求,达到了国外同类产品八十年代中期的水平,已在军、民品中应用。     

降膜蒸发器制造过程中的质量控制

介绍了降膜蒸发器制造过程中的质量控制重点及制造难点,从设计、工艺、采购与材料、焊接、无损检测、检验、水压试验等各控制环节进行了阐述,对其它容器的制造质量控制也有一定的指导意义。     

浸入式中空纤维膜元件的优化设计

在浸入式中空纤维膜元件纯净水测试实验基础上,研究了膜通量的分布情况,提出了膜元件的优化参数——单位产水膜成本,讨论了膜丝尺寸、出水方式、成本构成、应用场合等对膜元件的优化设计的影响,建立了一种中空纤维膜元件优化设计的方法.     

BOPP烟膜检测项目以及质量控制指标

本介绍了BOPP烟膜各项实验室检测项目以及相应的质量控制指标，并对各控制指标相对应的使用效果进行了阐述。     

U 型桥台桥梁施工及质量控制

U 型桥台因其台身是由前墙和两个侧墙构成的 U 字形结构而得名。本文详细介绍了对 U 型桥台桥梁施工工艺,并对质量控制进行叙述。     

压电元件的机械阻抗及在被动控制中的应用

从分析压电元件的机械阻抗出发。推导出具有外部电路压电元件系统的机械阻抗与电气阻抗的关系；得到了具有压电元件减振系统主系统的传递函数。用解动力减振器最优值的方法求得了具有最大减振效果时LR外部电路的最佳值。实验验证了具有外部电路压电元件系统的减振效果。结果表明：将最佳LR外部电路压电元件减振系统用于两端支持的简支梁时。其一阶模态的减振效果达到19dB左右。     

检验过程的质量控制

本文分析了检验工作中可能存原检验误判，探讨应用控制为监视过程的稳定性，并提出了考核检验质量的具体指标。     

控制图在检测实验室质量控制中的应用

0前言 在ISO/IEC 17025<检测和校准实验室能力的通用要求>中,技术要求的第9个要素"检测和校准结果质量的保证"(即5.9条)要求实验室在实际可行的情况下采用统计技术对检测结果数据进行技术核查,以监控检测的有效性,预防问题的发生.目前,各检测实验室正开始积极探索统计技术在检测质量控制方面的应用.本文通过运用 (-X)-R控制图分析钢勾心抗弯刚度的检测数据,说明控制图在检测实验室质量控制中的应用.     

灰色系统理论在质控图数据分析中的应用

文章基于灰色系统理论,结合动态不确定度评定的方法,通过系统误差的判别、标准差的计算、动态不确定的模型的建立,为质控图分析及动态不确定度的评定提供新的思路和方法.     

A New Control Technique with Quality Characteristic Shifting with Time

In this paper, a new quality control technique is discussed, in which the quality characteristic shifts with time. A trends semi‐circle control chart is proposed to control this type of processes effectively. An optimization model is suggested to determine the optimal interval of adjustment. We also discuss the average run length of the proposed control chart and the extension to the EWMA chart. An example is used to illustrate its application in a production process. Copyright © 2015 John Wiley & Sons, Ltd.     

基于小批量多品种生产环境的统计过程质量控制研究

分析了先进制造技术环境下实施统计过程质量控制所存在的问题，给出了一种基于正态过程的改进的标准化控制图，适用于小批量多品种生产环境下对过程均值、过程方差的有效控制。     

汽车零部件供应质量的现代控制模式

介绍了一种现代汽车制造厂对零部件供应商进行质量控制的先进管理模式，它包括对零部件的设计、生产、包装、交付等环节进行全面控制。主机厂通过对供应商质量能力的评估、零部件设计的认可、生产工艺流程的确认、样件的接受、预批量供货验证、批量供货零部件的验收、供应商质量能力的再评估、供货零部件免检验收、供应商巡视等过程来实现对零部件供应质量的保证与控制。     

城市高层建筑桩基础爆破开挖质量控制探讨

总结了高层建筑物桩基础爆破开挖质量控制体系 ,指出技术方案、爆破参数和安全管理措施是质量控制的根本 ,监理工程师的督促检查是质量控制的保证。文中进行了工程实际检验 ,取得了良好的效果     

Simultaneous Use of Runs Rules and Auxiliary Information With Exponentially Weighted Moving Average Control Charts

Quality has become a key determinant of success in all aspects of industry. Exponentially weighted moving average control chart is an important tool of statistical process control used to monitor and improve quality of industrial processes. To enhance the performance of control charts, there are many strategies including the choice of an efficient plotting statistic, the choice of an efficient sampling design, the application of runs rules, and the use auxiliary information among many others. In this study, we propose nine different signaling schemes to enhance the performance of an exponentially weighted moving average control chart for location parameter, which is based on the exploitation of auxiliary information. Performance evaluation of the proposed schemes is carried out in terms of average run length. Comparisons of proposals are made with the classical as well as the auxiliary based exponentially weighted moving average and cumulative sum charts, which indicate that the proposed schemes perform better than the comparative counterparts under discussion. Copyright © 2016 John Wiley & Sons, Ltd.     

空调房间的空气品质及其控制研究

以典型的空调房间为例,分析了新风和回风对室内空气品质的影响。研究表明室内污染源的不断增加 是室内空气品质恶化的主要原因,新风的质量直接影响室内空气品质,回风是室内空气的二次污染源。导出了新 风和回风对室内空气污染的理论计算公式,通过仿真表明：基于室内空气中典型的有害气体体积分数（以CO２为 代表）的变化来控制新风量,是非常有效的。     

A Generalized Likelihood Ratio Control Chart for Monitoring the Process Mean Subject to Linear Drifts

This article considers the problem of monitoring a normally distributed process variable when a special cause may produce a time‐varying linear drift in the mean. The design and application of a generalized likelihood ratio (GLR) control chart for drift detection are evaluated. The GLR drift chart does not require specification of any tuning parameters by the practitioner and has the advantage that, at the time of the signal, estimates of both the change point and the drift size are immediately available. An equation to accurately approximate the control limit is provided. The performance of the GLR drift chart is compared with that of other control charts such as a standard cumulative sum chart and a cumulative score chart designed for drift detection. We also compare the GLR chart designed for drift detection with the GLR chart designed for sustained shift detection because both of them require only a control limit to be specified. In terms of the expected time for detection and in terms of the bias and mean squared error of the change‐point estimators, the GLR drift chart has better performance for a wide range of drift rates relative to the GLR shift chart when the out‐of‐control process is truly a linear drift. Copyright © 2012 John Wiley & Sons, Ltd.     

预浸料的质量控制

预浸料的原料质量尤其是树脂质量是保证预浸料性能的基础,在预浸料制备过程中,及时、有效、无损的在线监测是预浸料发挥性能的保证。简要介绍了几种常用的在线监测手段,包括β射线监测、超声波监测、红外光谱监测及近红外光谱监测等。此外,预浸料成品的质量控制是复合材料性能的关键,其中凝胶时间、树脂流动性、挥发分含量、树脂含量、单位面积纤维质量等是预浸料重要的质量指标。