双燃料HCCI燃烧的优化策略

对有废气再循环(EGR)的情况下单一二甲基醚(DME)、DME／甲醇(Methanol)和DME/天然气(CNG)双燃料的均质压燃(HCCI)燃烧进行了实验研究．研究结果表明,单一DME的HCCI只能在小负荷下实现．采用DME／甲醇双燃料后,HCCI的负荷范围达到了原柴油机中高负荷水平．EGR能扩大双燃料HCCI的可控燃烧范围,但对扩展双燃料HCCI燃烧的负荷范围作用不大．分层燃烧技术有扩大双燃料发动机的负荷范围到大负荷的潜力．DME／甲醇双燃料HCCI的指示热效率要优于DME／CNG．在低负荷工况,采用单一DME加EGR的HCCI燃烧能获得更好的经济性指标．     

Fundamental phenomena affecting low temperature combustion and HCCI engines,high load limits and strategies for extending these limits

Low temperature combustion (LTC) engines are an emerging engine technology that offers an alternative to spark-ignited and diesel engines. One type of LTC engine, the homogeneous charge compression ignition (HCCI) engine, uses a well-mixed fuel–air charge like spark-ignited engines and relies on compression ignition like diesel engines. Similar to diesel engines, the use of high compression ratios and removal of the throttling valve in HCCI allow for high efficiency operation, thereby allowing lower CO₂ emissions per unit of work delivered by the engine. The use of a highly diluted well-mixed fuel–air charge allows for low emissions of nitrogen oxides, soot and particulate matters, and the use of oxidation catalysts can allow low emissions of unburned hydrocarbons and carbon monoxide. As a result, HCCI offers the ability to achieve high efficiencies comparable with diesel while also allowing clean emissions while using relatively inexpensive aftertreatment technologies.     

Progress and recent trends in homogeneous charge compression ignition (HCCI) engines

HCCI combustion has been drawing the considerable attention due to high efficiency and lower nitrogen oxide (NO_x) and particulate matter (PM) emissions. However, there are still tough challenges in the successful operation of HCCI engines, such as controlling the combustion phasing, extending the operating range, and high unburned hydrocarbon and CO emissions. Massive research throughout the world has led to great progress in the control of HCCI combustion. The first thing paid attention to is that a great deal of fundamental theoretical research has been carried out. First, numerical simulation has become a good observation and a powerful tool to investigate HCCI and to develop control strategies for HCCI because of its greater flexibility and lower cost compared with engine experiments. Five types of models applied to HCCI engine modelling are discussed in the present paper. Second, HCCI can be applied to a variety of fuel types. Combustion phasing and operation range can be controlled by the modification of fuel characteristics. Third, it has been realized that advanced control strategies of fuel/air mixture are more important than simple homogeneous charge in the process of the controlling of HCCI combustion processes. The stratification strategy has the potential to extend the HCCI operation range to higher loads, and low temperature combustion (LTC) diluted by exhaust gas recirculation (EGR) has the potential to extend the operation range to high loads; even to full loads, for diesel engines. Fourth, optical diagnostics has been applied widely to reveal in-cylinder combustion processes. In addition, the key to diesel-fuelled HCCI combustion control is mixture preparation, while EGR is the main path to achieve gasoline-fuelled HCCI combustion. Specific strategies for diesel-fuelled, gasoline-fuelled and other alternative fuelled HCCI combustion are also discussed in the present paper.     

Homogeneous charge compression ignition (HCCI) combustion of diesel fuel with external mixture formation

HCCI (Homogeneous Charge Compression Ignition) has been touted for many years as the alternate technology of choice for future engines, preserving the inherent efficiency of CIDI (Compression Ignition Direct Injection) engines while significantly reducing emissions. The current direction for all published diesel HCCI research is mixture preparation using the direct injection – system, referred to as internal mixture formation. The benefit of internal mixture formation is that it utilizes an already available direct injection system. Direct injected diesel HCCI can be divided into two areas, early injection (early in the compression stroke) and late injection (usually after Top Dead Center (aTDC)). Early direct injection HCCI requires carefully designed fuel injector to minimize the fuel wall-wetting that can cause combustion inefficiency and oil dilution. Late direct injection HCCI requires a long ignition delay and rapid mixing rate to achieve the homogeneous mixture. The ignition delay is extended by retarding the injection timing and rapid mixing rate was achieved by combining high swirl with toroidal combustion-bowl geometry. There is a compromise between Direct Injection (DI) and HCCI combustion regimes. Even under ideal conditions, it can prove difficult to form a truly homogeneous charge, which leads to elevated emissions when compared to true homogenous charge combustion and also strongly contribute to the high sensitivity of the combustion phasing to external parameters. The alternative to the internal mixture formation is, predictably, external mixture formation. By introducing the fuel external to the combustion chamber one can use the turbulence intake process to create a homogeneous charge regardless of engine conditions. This eliminates the need for combustion system changes which were necessary for the internal mixture formation method. With this method, the combustion system remains fully optimized for direct injection and also capable of running in HCCI combustion mode with nearly ideal mixture preparation. The key to the external mixture formation with diesel fuel is proper mixture preparation.     

Experimental investigation on the effect of intake air temperature and air–fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters

Combustion in HCCI engines is a controlled auto ignition of well-mixed fuel, air and residual gas. Since onset of HCCI combustion depends on the auto ignition of fuel/air mixture, there is no direct control on the start of combustion process. Therefore, HCCI combustion becomes unstable rather easily, especially at lower and higher engine loads. In this study, cycle-to-cycle variations of a HCCI combustion engine fuelled with ethanol were investigated on a modified two-cylinder engine. Port injection technique is used for preparing homogeneous charge for HCCI combustion. The experiments were conducted at varying intake air temperatures and air–fuel ratios at constant engine speed of 1500 rpm and P-θ diagram of 100 consecutive combustion cycles for each test conditions at steady state operation were recorded. Consequently, cycle-to-cycle variations of the main combustion parameters and performance parameters were analyzed. To evaluate the cycle-to-cycle variations of HCCI combustion parameters, coefficient of variation (COV) of every parameter were calculated for every engine operating condition. The critical optimum parameters that can be used to define HCCI operating ranges are ‘maximum rate of pressure rise’ and ‘COV of indicated mean effective pressure (IMEP)’.     

天然气发动机的研究现状

天然气能降低发动机的有害物排放,是一种比较理想的发动机代用燃料。稀燃天然气发动机具有较高的热效率和较低的NOx排放。均质充量压缩着火(HCCI)燃烧也是提高稀燃天然气发动机热效率的方法之一,并有很低的NOx排放。本文综述了稀燃天然气发动机和HCCI天然气发动机的研究进展,尤其是燃烧室形状、点火系统、充量分层、加氢等对天然气发动机性能的影响及天然气HCCI发动机的燃烧与排放特点。     

Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine

The homogeneous charge compression ignition (HCCI) is an alternative combustion concept for in reciprocating engines. The HCCI combustion engine offers significant benefits in terms of its high efficiency and ultra low emissions. In this investigation, port injection technique is used for preparing homogeneous charge. The combustion and emission characteristics of a HCCI engine fuelled with ethanol were investigated on a modified two-cylinder, four-stroke engine. The experiment is conducted with varying intake air temperature (120–150 °C) and at different air–fuel ratios, for which stable HCCI combustion is achieved. In-cylinder pressure, heat release analysis and exhaust emission measurements were employed for combustion diagnostics. In this study, effect of intake air temperature on combustion parameters, thermal efficiency, combustion efficiency and emissions in HCCI combustion engine is analyzed and discussed in detail. The experimental results indicate that the air–fuel ratio and intake air temperature have significant effect on the maximum in-cylinder pressure and its position, gas exchange efficiency, thermal efficiency, combustion efficiency, maximum rate of pressure rise and the heat release rate. Results show that for all stable operation points, NO_x emissions are lower than 10 ppm however HC and CO emissions are higher.     

废气再循环和发动机运转参数对不同辛烷值燃料HCCI燃烧的影响

考察了废气再循环(EGR)、进气温度、冷却水出水温度和转速等发动机运转参数对HCCI发动机燃烧特征和排放特性的影响。实验结果表明：随EGR率提高,各种燃料的两阶段着火时刻推迟,燃烧持续期延长;高十六烷值燃料可以容许较高的EGR率,RON75最高仅可以采用45％的EGR;EGR对高十六烷值燃料的CO和UHC影响不大,对高辛烷值燃料的CO影响明显,并随EGR率增加CO排放升高。在其它运转参数中,进气温度对HCCI燃烧影响最为显著,随进气温度提高、冷却水温度升高,HCCI燃烧的着火时刻提前、燃烧持续期缩短,高辛烷值燃料的UHC和CO显著降低。转速升高,着火延迟,燃烧持续期延长。此外,研究发现,高辛烷值燃料对HCCI发动机的运转参数更为敏感。     

Energy efficiency improvement strategies for a diesel engine in low‐temperature combustion

The lowered combustion temperature in diesel engines is capable of reducing nitrogen oxides and soot simultaneously, which can be implemented by the heavy use of exhaust gas recirculation (EGR) or the homogeneous charge compression ignition (HCCI) type of combustion. However, the fuel efficiency of the low‐temperature combustion (LTC) cycles is commonly compromised by the high levels of hydrocarbon and carbon monoxide emissions. More seriously, the scheduling of fuel delivery in HCCI engines has lesser leverage on the exact timing of auto‐ignition that may even occur before the compression stroke is completed, which may cause excessive efficiency reduction and combustion roughness. New LTC control strategies have been explored experimentally to achieve ultralow emissions under independently controlled EGR, intake boost, exhaust backpressure, and multi‐event fuel‐injection events. Empirical comparisons have been made between the fuel efficiencies of LTC and conventional diesel cycles. Preliminary adaptive control strategies based on cylinder pressure characteristics have been implemented to enable and stabilize the LTC when heavy EGR is applied. The impact of heat‐release phasing, duration, shaping, and splitting on the thermal efficiency has also been analyzed with engine cycle simulations. This research intends to identify the major parameters that affect diesel LTC engine thermal efficiency. Copyright © 2008 John Wiley & Sons, Ltd.     

活性添加剂对高辛烷值燃料HCCI着火时刻与燃烧速率的影响

为研讨活性添加剂过氧化二叔丁基(DTBP)对高辛烷值燃料以HCCI燃烧模式运行时的放热率特征、着火时刻、燃烧持续期和排放特性的影响,在一台单缸发动机上,在辛烷值为90(RON90)(90％的异辛烷和10％的正庚烷)的混合燃料中加入不同比例(0～4％)的DTBP,考察5种燃料在1800r／min下不同负荷时的燃烧特性和排放特性．实验结果表明：RON90中没有添加剂时,只能在高温、高负荷下才能以HCCI燃烧模式运行;在其中加入少量的DTBP后,RON90实现HCCI燃烧的工况范围向低温低负荷下大幅度拓展．各种燃料的HCCI燃烧冷焰反应发生在850K左右,到950K结束,进入负温度系数区(NTC),在1125K左右突破NTC区而发生热着火．随DTBP含量增加,系统温度达到冷焰反应和热焰反应的化学时间尺度缩短,因此着火时刻提前,燃烧持续期缩短,特别是提高了低负荷下的燃烧速率．添加剂使各种当量比下未燃碳氢(UHC)和一氧化碳(CO)排放显著改善,NOx排放也保持在很低的水平．     

Active fuel design—A way to manage the right fuel for HCCI engines

Homogenous charge compression ignition (HCCI) engines feature high thermal efficiency and ultralow emissions compared to gasoline engines. However, unlike SI engines, HCCI combustion does not have a direct way to trigger the in-cylinder combustion. Therefore, gasoline HCCI combustion is facing challenges in the control of ignition and, combustion, and operational range extension. In this paper, an active fuel design concept was proposed to explore a potential pathway to optimize the HCCI engine combustion and broaden its operational range. The active fuel design concept was realized by real time control of dual-fuel (gasoline and n-heptane) port injection, with exhaust gas recirculation (EGR) rate and intake temperature adjusted. It was found that the cylinderto- cylinder variation in HCCI combustion could be effectively reduced by the optimization in fuel injection proportion, and that the rapid transition process from SI to HCCI could be realized. The active fuel design technology could significantly increase the adaptability of HCCI combustion to increased EGR rate and reduced intake temperature. Active fuel design was shown to broaden the operational HCCI load to 9.3 bar indicated mean effective pressure (IMEP). HCCI operation was used by up to 70% of the SI mode load while reducing fuel consumption and nitrogen oxides emissions. Therefore, the active fuel design technology could manage the right fuel for clean engine combustion, and provide a potential pathway for engine fuel diversification and future engine concept.     

DME/LPG燃料比例实时优化的HCCI燃烧控制新方法

根据燃料设计的思想,提出了混合燃料比例实时优化的HCCI燃烧控制新方法。在一台2135柴油机上,通过燃料成分设计（DME／LPG混合燃料）、混合气成分设计（进气添加二氧化碳）、发动机参数调整（改变压缩比）等多种模式对二甲醚HCCI燃烧进行了研究和比较。试验结果表明,在不同工况下实时进行DME／LPG比例优化,通过改变燃料的理化特性和可燃混合气的成分,实现了HCCI着火与燃烧的有效控制,能够显著拓展二甲醚HCCI燃烧的运行负荷范围,并且各个工况下热效率最高、HC和CO排放最低。     

一种新的燃烧方式——均匀充量压缩着火的研究进展

本文分析了均质充量压缩着火的特点，国外将均质充理压缩着火方式应用于往复式发动机中的研究现状，阐述了燃料系统的设计，并探讨了在我国开展均质充量压缩着火研究工作的必要性和方案。     

一种新的燃烧方式——均匀充量压缩着火的研究进展

分析均质充量压缩着火的特点,国外将均质充量压缩着火方式应用于往复式发动机中的研究现状,阐述燃料系统的设计,并探讨在我国开展均质充量压缩着火研究工作的必要性和方案。     

HCCI甲醇发动机的燃烧与排放特性

在Ricardo Hydra单缸四冲程发动机上利用内部废气再循环策略实现了甲醇燃料的HCCI燃烧.通过调整HCCI发动机的过量空气系数和转速,研究了HCCI甲醇发动机的燃烧和排放特性.结果表明,甲醇燃料的HCCI燃烧不同于普通汽油,其着火更早、燃烧更快,但在低转速时,平均指示压力相对较低.甲醇燃料可以在更稀的混合气条件下实现HCCI燃烧.在相同的转速和过量空气系数下,甲醇燃料的NOx和HC排放低于汽油.     

催化燃烧对均质压燃发动机燃烧特性影响的数值模拟

通过运用DETCHEM软件包,对甲烷在催化剂Rh表面的详细反应机理进行了分析,结果表明数值模拟结果与实验数据相当吻合;通过耦合DETCHEM软件包及CHEMKIN软件包中的SENKIN模块,对活塞顶涂有催化剂铑的均质压燃(HCCI)发动机的燃烧过程进行了数值计算,建立了单区和多区模型．利用单区模型分析了催化燃烧对HCCI发动机着火时刻的影响,同时讨论了催化燃烧对燃烧过程中主要化学组分浓度变化的影响,结果表明催化燃烧会使HCCI发动机着火时刻提前;利用多区模型分析了催化燃烧对HCCI发动机的未燃碳氢化合物(UHC)、氮氧化合物(NOx)排放的影响,结果表明催化燃烧能降低UHC的排放,但会提高NOx的排放．     

废气再循环与燃料辛烷值对均质压燃燃烧特性影响的试验研究

在一台单缸直喷式柴油机上研究了废气再循环（EGR）对不同辛烷值燃料均质压燃（HCCI）燃烧特性及排放特性的影响.结果表明,EGR使HCCI着火燃烧推迟、燃烧反应速度降低、缸内压力和平均温度降低,HCCI工况范围向大负荷工况扩展;混合气浓度增大或燃料辛烷值增大,EGR对燃烧效率的影响增大,EGR率升高,燃烧效率降低;不同辛烷值燃料最高燃烧效率出现在高比例EGR率、混合气较浓、靠近爆震燃烧边界的区域.试验结果也表明,辛烷值为60的燃料采用EGR后HCCI覆盖的工况范围最宽.     

Evolution,challenges and path forward for low temperature combustion engines

Universal concerns about degradation in ambient environment, stringent emission legislations, depletion of petroleum reserves, security of fuel supply and global warming have motivated research and development of engines operating on alternative combustion concepts, which also have capability of using renewable as well as conventional fuels. Low temperature combustion (LTC) is an advanced combustion concept for internal combustion (IC) engines, which has attracted global attention in recent years. LTC concept is different from the conventional spark ignition (SI) combustion as well as compression ignition (CI) diffusion combustion concepts. LTC technology offers prominent benefits in terms of simultaneous reduction of both oxides of nitrogen (NO_x) and particulate matter (PM), in addition to reduction in specific fuel consumption (SFC). However, controlling ignition timing and combustion rate are primary challenges to be tackled before LTC technology can be implemented in automotive engines commercially. This review covers fundamental aspects of development of LTC engines and its evolution, historical background and origin of LTC concept, encompassing LTC principle, its advantages, challenges and prospects. Detailed insights into preparation of homogeneous charge by external and internal measures for mineral diesel and gasoline like fuels are covered. Fuel requirements and fuel induction system design aspect for LTC engines are also discussed. Combustion characteristics of LTC engines including combustion chemistry, heat release rate (HRR), combustion duration, knock characteristics, high load limit, fuel conversion efficiencies and combustion instability are summarized. Emission characteristics are reviewed along with insights into PM and NO_x emissions from LTC engines. Finally, different strategies for controlling combustion rate and combustion timings for gasoline and mineral diesel like fuels are discussed, showing the way forward for this technology in future towards its commercialization.     

Experimental study of fuel stratification for HCCI high load extension

Fuel stratification has the potential to extend the high load limits of homogeneous charge compression ignition (HCCI) combustion by improving the control over the combustion phase as well as reducing the maximum rate of pressure rise. In this work, experiments were carried out on a single-cylinder engine equipped with a dual-fuel-injection system – a port injector for preparing a homogeneous charge and a direct in-cylinder injector for creating the desired fuel stratification. The homogeneous charge was prepared using gasoline fuel while the fuel stratification was created with the in-cylinder injection of either gasoline or methanol during the compression stroke. The test results indicate that high load extension using gasoline for fuel stratification is limited by the trade-off between CO and NO_x emissions. Weak gasoline stratification leads to an advanced combustion phase and an increase in NO_x emission, while increasing the stratification with a higher quantity of gasoline direct injection, results in a significant deterioration in both the combustion efficiency and the CO emission. Engine tests using methanol for the stratification retarded the ignition timing and prolonged the combustion duration, resulting in a substantial reduction in the maximum rate of pressure rise and the maximum cylinder pressure – a prerequisite for HCCI high load extension. Further tests were then conducted with methanol stratification to extend the HCCI load limit and to optimize the stratified methanol-to-gasoline fuel ratio. Compared to gasoline HCCI, a 50% increase in the maximum IMEP attained was achieved with an acceptable maximum pressure rise rate of 0.5 MPa/°CA while maintaining a high thermal efficiency.     

辛烷值对均质压燃发动机燃烧特性和性能的影响

通过不同比例的正庚烷和异辛烷混合得到不同辛烷值的混合燃料，在一台单缸直喷式柴油机上研究燃料辛烷值对均质压燃发动机燃烧特性、性能和排放特性的影响．研究结果表明，燃料辛烷值增加，着火始点推迟，燃烧反应速率降低，缸内爆发压力降低．燃料辛烷值增高，均质压燃向大负荷工况拓宽，燃料辛烷值较高时，存在极限转速，辛烷值增加，极限转速降低．对于每一工况，存在一个最佳经济性的燃料辛烷值，负荷增大，最佳辛烷值增高；随着燃料辛烷值增高，发动机NO、HC和CO排放增加，尤其是HC排放增加更为明显．对于均质压燃发动机，低负荷工况适合燃用低辛烷值燃料，高负荷工况适合燃用高辛烷值燃料。