A MAC/PHY cross-layer design for efficient ARQ protocols

In many wireless data systems, automatic repeat request (ARQ) and hybrid automatic repeat request (HARQ) work independently. In this paper, we introduce a new ARQ feedback scheme called Cross-Layer ARQ (CL-ARQ), where ARQ closely interoperates with HARQ by making use of the acknowledgement of HARQ internally. By doing so, CL-ARQ not only removes the overhead for ARQ acknowledgement messages, but also improves the average delivery delay and TCP throughput. Especially, when the entities in charge of HARQ and ARQ are located far apart geographically, CL-ARQ remarkably outperforms the legacy scheme.     

Energy-efficient MAC protocols for Wireless Sensor Networks

Designing energy-efficient Medium Access Control (MAC) protocols has a significant influence on the energy performance of wireless sensor network (WSN). In this paper we present a survey of the recent typical MAC protocols regarding energy effi ciency for WSN. According to channel access policies, we classify these protocols into four categories:contention-based, TDMA-based, hybrid, and cross layer protocols, in which the advantages and disadvantages in each class of MAC protocols are discussed. Finally, we point out open research issues that need to carry on to achieve high energy efficiency for the design of MAC protocols in WSN.     

Slot reuse in MAC protocols for MAN's

Most of the medium-access control (MAC) sublayer protocols recently proposed for application in very high-speed local and metropolitan area networks (LANs and MANs) are based on a slotted transmission scheme. Slotting guarantees very good throughput efficiencies, but further gains are possible if slots can be freed after reaching their destination, thus being available for repeated use as they propagate in the network. The authors describe a simulation-based quantitative analysis of the performance gains obtained by introducing slot reuse in distributed-queue dual-bus (DQDB) and cyclic reservation multiaccess (CRMA) MANs. CRMA-II, the latest evolution of CRMA, naturally incorporates slot reuse in the MAC protocol operations and is considered in the study for comparison purposes. In the case of the standard DQDB protocol, some existing proposals are considered. In the case of CRMA, both a previous IBM proposal and a novel approach, leading to very good performances, are studied     

Energy considerations for topology-unaware TDMA MAC protocols

Since the energy budget of mobile nodes is limited, the performance of a networking protocol for such users should be evaluated in terms of its energy efficiency, in addition to the more traditional metrics such as throughput. In this paper, two topology-unaware MAC protocols—in which the scheduling time slots are allocated irrespectively of the underline topology—are considered and their energy consumption is derived. It turns out that the per frame power consumption is lower for the less throughput-efficient protocol, suggesting that energy savings are achieved at the expense of throughput.A finer energy consumption study is carried out in the sequel, focusing on the amount of energy consumed to successfully transmit a certain number of packets, or equivalently, on the per successful transmission power consumption. It is shown that the more throughput-efficient protocol consumes less energy per successful transmission under certain conditions (which are derived), due to the lower number of transmission attempts before a data packet is successfully transmitted. The same energy-efficiency relation is observed under certain conditions (which are derived) when data packets are delay constrained and, thus, may become obsolete if not transmitted successfully within a specific time interval. The conditions under which the per successful transmission power consumption is minimized for delay-constrained packets, are also established in this work and it is observed that when the system throughput is maximized, the power consumed is close to the minimum. Simulation results support the claims and the expectations of the aforementioned analysis.     

Multiple feedback algorithm for RFID MAC protocols

This letter introduces a new tree-based anti-collision scheme using multiple feedbacks for uplink tag random access in a single-cell scenario. We examine MAC efficiency improvements that result from the proposed scheme in terms of uplink (UL) throughput for emerging radio frequency identification (RFID) networks, and compare it with the conventional tree based RFID MAC in ISO 18000-6 Type B standard.     

Performance evaluation of CSMA/ID MAC protocol for IP over WDM ring networks

In this paper, a packet pre‐classification media access control protocol based on a carrier sense multiple access with idle detection (CSMA/ID) scheme is investigated for supporting IP packets over all‐optical WDM ring networks. The purpose of the protocol is to increase throughput and to decrease the packet transmission delay of IP packets over optical networks in a metropolitan area network. This protocol avoids both packet collision and packet fragmentation. In order to improve the utilization of the network, the packets transmitted from a local area network are first pre‐classified into various class queues of an access point (AP) according to their length. After checking the available space based on the wavelength received by the receivers of the AP, the packets in the queues are transmitted. An analytical model is developed to evaluate the performance of the protocol, with simulation results showing good network efficiency. The proposed network has short‐term variations that introduce unfairness conditions. This problem could be overcome by assigning a quota on individual queues to allow all queues fair access. Copyright © 2008 John Wiley & Sons, Ltd.     

Performance analysis of MAC layer protocols in the IEEE 802.11 wireless LAN

In recent years, WLANs (Wireless Local Area Networks) based on the IEEE 802.11 standard have been taken a growing interest and developed widely all over the world. CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) protocols are the most popular MAC (Medium Access Control) protocols for WLANs. The performance of CSMA/CA protocols over wireless channels has been investigated over the past years. In this paper, we obtain the probability distribution function of the MAC layer packet service time, and we present the comprehensive performance analysis of IEEE 802.11 MAC protocol by investigating the queue dynamics of a wireless station based on the MAC layer packet service time. We adopt an MMPP(Markov Modulated Poisson Process) as the input traffic model that describes well the bursty nature of Internet traffic. The analysis on the throughput and the delay performance has been carried out by using the MMPP/G/1/K queueing model. We have some numerical results that represent the system throughput and the queue dynamics including the mean packet waiting time and packet blocking probability.     

Meta-MAC protocols: automatic combination of MAC protocols tooptimize performance for unknown conditions

A systematic and automatic method to dynamically combine any set of existing MAC protocols into a single higher layer, or meta-MAC protocol, is presented. The new approach makes it possible to always achieve the performance of the best component protocol, without knowing in advance which protocol will match the potentially changing and unpredictable network conditions. Moreover, this dynamic optimization is entirely automatic and runs without any centralized control or any exchange of messages, using only local network feedback information. We describe the method and prove that the resulting meta-MAC protocol achieves optimal performance in a well-defined sense. Through simulation on different types of networks and with different component MAC protocols, we demonstrate that our simple and practical combination algorithm yields highly adaptive and scalable MAC solutions     

Planar reflector for LMCS applications

A novel planar reflector is presented for dual orthogonal polarisation applications. The proposed dual polarised planar reflector is composed of two sets of rectangular gratings with perpendicular alignments with respect to each other. The proposed structure maintains high isolation between the two polarisations     

Performance evaluation of ad hoc routing protocols for military communications

Mobile ad hoc networks (MANETs) are of much interest to both the research community and the military because of the potential to establish a communication network in any situation that involves emergencies. Examples are search‐and‐rescue operations, military deployment in hostile environments, and several types of police operations. One critical open issue is how to route messages considering the characteristics of these networks. The nodes act as routers in an environment without a fixed infrastructure, the nodes are mobile, the wireless medium has its own limitations compared to wired networks, and existing routing protocols cannot be employed, at least without modifications. Over the last few years, a number of routing protocols have been proposed and enhanced to address the issue of routing in MANETs. It is not clear how those different protocols perform under different environments. One protocol may be the best in one network configuration but the worst in another. This article provides an analysis and performance evaluation of those protocols that may be suitable for military communications. The evaluation is conducted in two phases. In the first phase, we compare the protocols based on qualitative metrics to locate those that may fit our evaluation criteria. In the second phase, we evaluate the selected protocols from the first phase based on quantitative metrics in a mobility scenario that reflects tactical military movements. The results disclose that there is no routing protocol in the current stage without modifications that can provide efficient routing to any size of network, regardless of the number of nodes and the network load and mobility. Copyright © 2011 John Wiley & Sons, Ltd.     

A survey of MAC protocols proposed for wireless ATM

Wireless ATM (W-ATM) networks have been studied extensively. The extension of ATM network services to the wireless environment faces many interesting problems. The original ATM network was designed for high-speed noiseless, reliable channels. None of these characteristics are applicable to the wireless channel. One of the most critical aspects of a W-ATM network is the medium access control (MAC) protocol used by mobile terminals (MTs) to request service from the base station (BS), which has to consider the quality of service (QoS) of the specific application. In this article the authors analyze some MAC protocols, particularly those for TDMA systems, and discuss their advantages and disadvantages     

Adaptive MAC protocols for broadcast networks with bursty traffic

An adaptive medium access control protocol for broadcast networks, which is capable of operating efficiently under bursty traffic conditions, is introduced. According to the proposed protocol, the station which grants permission to transmit at each time slot is selected by taking into account the network feedback information. In this way, the number of idle slots is minimized and the network performance is significantly improved. Furthermore, the portion of the bandwidth assigned to each station is dynamically adapted to the station's needs.     

On the implant communication and MAC protocols for WBAN

Recent advances in micro‐electro‐mechanical systems, wireless communication, low‐power intelligent sensors, and semiconductor technologies have allowed the realization of a wireless body area network (WBAN). A WBAN provides unobtrusive health monitoring for a long period of time with real‐time updates to the physician. It is widely used for ubiquitous health care, entertainment, and military applications. The implantable and wearable medical devices have several critical requirements such as power consumption, data rate, size, and low‐power medium access control (MAC) protocols. This article consists of two parts: body implant communication, which is concerned with the communication to and from a human body using radio frequency (RF) technology, and WBAN MAC protocols, which presents several low‐power MAC protocols for a WBAN with useful guidelines including a case study of IEEE 802.15.4, PB‐TDMA, and SMAC protocols. In body implant communication, the in‐body RF performance is affected considerably by the implant's depth and different polarization combinations inside the human body as well as by the muscle and fat. We observe best performance at a depth of 3 to 5 cm and not close to the human skin. Furthermore, the study of low‐power MAC protocols highlights the most important aspects of developing a novel low‐power and reliable MAC protocol for a WBAN. Copyright © 2010 John Wiley & Sons, Ltd.     

MAC protocols for wireless sensor networks: a survey

Wireless sensor networks are appealing to researchers due to their wide range of application potential in areas such as target detection and tracking, environmental monitoring, industrial process monitoring, and tactical systems. However, low sensing ranges result in dense networks and thus it becomes necessary to achieve an efficient medium-access protocol subject to power constraints. Various medium-access control (MAC) protocols with different objectives have been proposed for wireless sensor networks. In this article, we first outline the sensor network properties that are crucial for the design of MAC layer protocols. Then, we describe several MAC protocols proposed for sensor networks, emphasizing their strengths and weaknesses. Finally, we point out open research issues with regard to MAC layer design.     

WDM突发交换环网的多令牌MAC协议的设计和性能评价

提出了应用于WDM突发交换环网的一系列多令牌MAC协议,其中网络系统中的节点采用TT-TR的节点结构,在即使是像IP这样高度自相似的信息结构大幅度改变的时候,仍能有效地利用网络资源且具有良好的扩展性.最后通过OPNET仿真评估了这些MAC协议的性能,比较了它们的平均包延迟、信道利用率和丢包率.仿真结果表明它们在提高网络性能的同时降低了每个节点的处理开销.     

Design of multichannel MAC protocols for wireless ad hoc networks

Medium access control (MAC) protocols coordinate channel access between wireless stations, and they significantly affect the network throughput of wireless ad hoc networks. MAC protocols that are based on a multichannel model can increase the throughput by enabling more simultaneous transmission pairs in the network. In this paper, we comprehensively compare different design methods for multichannel MAC protocols. We classify existing protocols into different categories according to the channel negotiation strategies they employ. The common problems that may be encountered in multichannel design are discussed. We then propose a hybrid protocol that combines the advantages of the two methods of a common control channel and a common control period. The simulation results show that our proposed protocol can significantly outperform two representative protocols. Copyright © 2008 John Wiley & Sons, Ltd.     

无线传感网混合类MAC协议研究综述

在无线传感网( WSN)体系结构中,介质访问控制( MAC)协议负责调配网络中节点的信道接入,具有保障网络高效通信的重要作用。混合类MAC 协议综合了竞争类MAC 协议以及调度类MAC协议的特点,在融合两种机制的优点的同时克服其缺点,为无线信道资源的分配提供了更加灵活和全面的策略。首先概述了无线传感网MAC协议设计要点及分类,然后重点分析了无线传感网中经典的混合类MAC协议及国内外前沿的研究进展,并进一步归纳对比了各协议运行机制、性能及不足,得出混合类MAC协议的应用相关性及差异性的结论,最后总结了无线传感网混合类MAC协议研究现状并指出了未来的研究重点,以期为相关领域的研究人员提供参考。     

On designing MAC protocols for wireless networks using directional antennas

We investigate the possibility of using directional antennas for medium access control in wireless ad hoc networks. Previous research in ad hoc networks typically assumes the use of omnidirectional antennas at all nodes. With omnidirectional antennas, while two nodes are communicating using a given channel, MAC protocols such as IEEE 802.11 require all other nodes in the vicinity to remain silent. With directional antennas, two pairs of nodes located in each other's vicinity may potentially communicate simultaneously, increasing spatial reuse of the wireless channel. Range extension due to higher gain of directional antennas can also be useful in discovering fewer hop routes. However, new problems arise when using directional beams that simple modifications to 802.11 may not be able to mitigate. This paper identifies these problems and evaluates the tradeoffs associated with them. We also design a directional MAC protocol (MMAC) that uses multihop RTSs to establish links between distant nodes and then transmits CTS, DATA, and ACK over a single hop. While MMAC does not address all the problems identified with directional communication, it is an attempt to exploit the primary benefits of beamforming in the presence of some of these problems. Results show that MMAC can perform better than IEEE 802.11, although we find that the performance is dependent on the topology and flow patterns in the system.     

无线传感器网络及其MAC层协议

无线传感器网络（WSN）是当今信息领域的一大研究热点，在军事、环境、医疗护理和智能家居等方面有着广阔的应用前景，引起了世界各国的广泛关注。首先介绍了无线传感器网络的相关理论知识，然后对无线传感器网络目前所采用的典型的MAC协议按类型进行了介绍。