可逆加成-断裂链转移聚合制备聚氯乙烯-b-聚乙二醇-b-聚氯乙烯共聚物

合成了含黄原酸酯端基的聚乙二醇(X-PEG-X)大分子链转移剂,并以其为可逆加成-断裂链转移试剂调控氯乙烯(VC)溶液和悬浮聚合,合成聚氯乙烯-b-聚乙二醇-b-聚氯乙烯(PVC-b-PEG-b-PVC)三嵌段共聚物。X-PEG-X调控VC溶液聚合得到的共聚物的分子量随聚合时间增加而增大,分子量分布指数小于1.65。X-PEG-X具有水/油两相分配和可显著降低水/油界面张力的特性,以X-PEG-X为链转移剂和分散剂,通过自稳定悬浮聚合也可合成PVC-b-PEG-b-PVC共聚物,共聚物颗粒无皮膜结构,分子量随聚合时间增加而增大;由于VC悬浮聚合具有聚合物富相和单体富相两相聚合特性,共聚物分子量分布指数略大于溶液聚合共聚物。通过乙酸乙烯酯(VAc)扩链反应进一步证实了PVC-b-PEG-b-PVC的"活性",并合成PVAc-b-PVC-b-PEG-b-PVC-b-PVAc共聚物。水接触角测试表明PVC-b-PEG-b-PVC的亲水性优于PVC。     

黄原酸酯调控的氯乙烯的可逆-加成断裂链转移聚合

以三种不同结构的黄原酸酯为调控剂,进行氯乙烯（VC）溶液和细乳液可逆加成-断裂链转移（RAFT）聚合,发现O-乙基黄原酸丙酸乙酯对VC聚合的调控效果良好,氯乙烯RAFT细乳液聚合速率明显大于溶液聚合,VC聚合12 h转化率大于90%,但聚氯乙烯（PVC）的分子量分布宽于溶液聚合产物。核磁共振和紫外可见吸收光谱分析证明合成的PVC具有黄原酸酯基端基结构,结构缺陷少。含黄原酸酯基PVC可进一步调控VC及醋酸乙烯酯聚合,进行扩链或得到嵌段共聚物。结合聚合动力学,说明黄原酸酯调控的氯乙烯聚合具有活性特征。     

黄原酸酯调控的氯乙烯的可逆-加成断裂链转移聚合

以三种不同结构的黄原酸酯为调控剂,进行氯乙烯(VC)溶液和细乳液可逆加成-断裂链转移(RAFT)聚合,发现O-乙基黄原酸丙酸乙酯对VC聚合的调控效果良好,氯乙烯RAFT细乳液聚合速率明显大于溶液聚合,VC聚合12h转化率大于90%,但聚氯乙烯(PVC)的分子量分布宽于溶液聚合产物。核磁共振和紫外可见吸收光谱分析证明合成的PVC具有黄原酸酯基端基结构,结构缺陷少。含黄原酸酯基PVC可进一步调控VC及醋酸乙烯酯聚合,进行扩链或得到嵌段共聚物。结合聚合动力学,说明黄原酸酯调控的氯乙烯聚合具有活性特征。     

PACMO-b-PVC-b-PACMO共聚物的合成和表征

为拓展聚氯乙烯(PVC)嵌段共聚改性,以由单电子转移-蜕化链转移(SET-DT)活性自由基聚合制备的含活性碘末端的PVC(I-PVC-I)为大分子引发剂、Na2S2O4/NaHCO3为催化体系,进行丙烯酰吗啉SET-DT活性自由基溶液聚合,合成聚丙烯酰吗啉-b-聚氯乙烯-b-聚丙烯酰吗啉(PACMO-b-PVC-b-P...     

P2VP-b-PS-b-PI三嵌段共聚物的RAFT合成及表征

以S-十二烷基-S’-(α,α’-二甲基-α’’-乙酸)-三硫代碳酸酯(DDMAT)为链转移剂,通过可逆加成-断裂链转移自由基聚合(RAFT)方法制备了窄分布的聚2-乙烯基吡啶。再以该聚合物为大分子链转移剂,引发苯乙烯的RAFT聚合,得到聚2-乙烯基吡啶-b-聚苯乙烯(P2VP-b-PS)的两嵌段共聚物。以P2VP-b-PS为RAFT试剂,合成聚2-乙烯基吡啶-b-聚苯乙烯-b-聚异戊二烯(P2VP-b-PS-b-PI)的三嵌段共聚物。运用1H NMR、IR和凝胶渗透色谱(GPC)等技术对产物的结构和分子量及分子量分布进行表征,采用原子力显微镜(AFM)观察三嵌段共聚物薄膜的微相分离结构。结果表明,所得三嵌段共聚物P2VP72-b-PS136-b-PI300分子量分布较窄(PDI=1.69),合成过程具有活性/可控聚合特征,聚合物薄膜经溶剂退火处理后出现了明显的微观相分离结构。     

聚乙二醇-b-聚对苯二甲酸丁二醇酯嵌段共聚物在模拟土壤环境中的降解行为

根据降解过程中聚乙二醇-b-聚对苯二甲酸丁二醇酯(PEGT-b-PBT)嵌段共聚物失重率、特性黏度、表面形态等方面的变化初步评价了其在实验室模拟土壤环境中的降解行为.实验结果表明嵌段共聚物的降解与其组成密切相关,共聚物的特性黏度变化率和失重率随PBT组分含量的增大而降低,通过调节共聚物的组成可以达到调节降解速率的目的,水介质有助于降解产物的扩散.     

耐热聚氯乙烯的合成技术研究

研究了耐热聚氯乙烯（PVC）的合成工艺,考察了PMI用量及聚合温度对VC／PMI聚合技术的影响。在此基础上,对VC／PMI／AN三元悬浮共聚体系进行了研究,从引发剂的种类及用量的选择角度,讨论了AN用量及聚合温度对此体系聚合技术的影响     

胺基双酚钴在合成极性单体与苯乙烯嵌段共聚物中的应用

采用低成本、高活性胺基-双酚钴配合物调控的自由基聚合(CMRP)和催化链转移反应(CCT)对乙酸乙烯酯或丙烯酸叔丁酯与苯乙烯单体进行了共聚反应。以钴配合物为催化剂、偶氮二异丁腈(AIBN)为引发剂、聚乙烯吡咯烷酮(PVP)为分散剂,通过溶液聚合方法得到的聚乙酸乙烯酯和聚丙烯酸叔丁酯作为大分子引发剂,引发苯乙烯的分散聚合,从而获得具有较低分子量分布(～1.93)的丙烯酸叔丁酯和苯乙烯的共聚物及乙酸乙烯酯和苯乙烯的共聚物(PVAc-b-PS和PtBA-b-PS),数均分子量随单体转化率线性增加。运用凝胶渗透色谱、核磁共振波谱、扫描电子显微镜等测试手段对合成的嵌段共聚物进行了表征。     

双硫酯作为链转移剂的苯乙烯本体聚合研究

研究了二硫代苯甲酸苄基酯（BDB）、二硫代苯甲酸苯乙基酯（PEDB）及二硫代苯甲酸异丙苯基酯（CDB）三种RAFT试剂作为链转移剂的苯乙烯本体聚合。动力学研究表明,当BDB及PEDB浓度和偶氮二异丁腈（AIBN）浓度同时增大时,AIBN浓度提高所导致的聚合反应速率提高起主导作用：当CDB和AIBN浓度同时提高时,CDB浓度提高所导致的聚合速率降低作用影响更显著。对CDB体系,随转化率提高分子量分布变宽。对BDB体系,当其浓度较高时,随转化率提高分子量分布变窄;当其浓度较低时,不利于实现可控,活性聚合,反应后期分子量分布变宽。动力学和GPC分析均表明以BDB为链转移剂时苯乙烯本体聚合的可控性最好。在同时考虑链转移剂和引发剂作用的基础上,提出了修正的聚合物分子量预测模型,该模型可有效预测以双硫酯为链转移剂的苯乙烯RAFT聚合体系的分子量。     

两亲性苯乙烯嵌段共聚物的合成及结构表征

以α,α'-二甲基-α-乙酸-三硫代碳酸酯(BDATC)为链转移剂,采用可逆-加成-断裂链转移(RAFT)自由基聚合方法合成了末端带有—COOH官能团的两亲性嵌段共聚物聚苯乙烯-b-聚甲基丙烯酸聚乙二醇单甲醚-b-聚苯乙烯(PSt-b-POEOMA-b-PSt),这种含有亲水性端基的嵌段共聚物可以自组装成核-壳结构的纳米微粒,用于载药高分子的模板研究。利用FTIR、1HNMR、GPC对产物结构进行表征,用热失重(TG)和差示扫描量热(DSC)的方法研究了3种不同比例的嵌段共聚物的热性能。实验结果表明,通过RAFT聚合方法得到了所设计的嵌段共聚物,相对分子质量(简称分子量,下同)分布1.35左右;嵌段共聚物的热稳定性较好,通过玻璃化转变温度(Tg)的变化推测出嵌段共聚物中两种嵌段比例对两嵌段相容性的影响。     

Synthesis of random and block copolymers of vinyl chloride and vinyl acetate by RAFT miniemulsion polymerizations mediated by a fluorinated xanthate

Reversible addition–fragmentation chain transfer miniemulsion (co)polymerizations of vinyl acetate (VAc) and vinyl chloride (VC) are conducted in the presence of a fluorinated xthanate (X1). VAc miniemulsion polymerization can be well controlled by X1, and PVAc with small polydispersity index (PDI, <1.20) are obtained. X1 also shows well mediative effect to VC‐VAc miniemulsion copolymerization, while the PDI of VC‐VAc copolymer is greater than that of PVAc since a chain transfer rate to VC is greater than that to VAc. PVAc‐b‐PVC copolymers are synthesized by VC miniemulsion polymerizations mediated by X1‐terminated PVAc. PDIs of PVAc‐b‐PVC copolymers are greater than that of PVAc and VC‐VAc random copolymers with close monomer compositions, and increase with the increase of VC conversion. This is caused by the increased chain transfer to monomer and the formation of monomer‐rich and polymer‐rich phases during the VC polymerization stage. As‐prepared PVAc‐b‐PVC copolymers exhibit a micro‐phase separated morphology. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45074.     

Properties of Poly(vinyl chloride)/poly(ethylene oxide)/polyaniline Conductive Films: The Effect of Poly(ethylene glycol) Diglycidyl Ether

The effect of polyaniline and poly(ethylene glycol) diglycidyl ether on tensile properties, morphology, thermal degradation, and electrical conductivity of poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films was studied. The poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films were prepared using a solution casting technique at room temperature until a homogeneous solution was produced. Poly(vinyl chloride)/poly(ethylene oxide)/polyaniline/poly(ethylene glycol) diglycidyl ether conductive films exhibit higher electrical properties, tensile strength, modulus of elasticity but lower final decomposition temperature than poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films. Scanning electron microscopy morphology showed that the polyaniline more widely dispersed in the poly(vinyl chloride)/poly(ethylene oxide) blends with the addition of poly(ethylene glycol) diglycidyl ether as surface modifier.     

Controlled free‐radical polymerization of vinyl chloride

Owing to the importance of poly(vinyl chloride) (PVC) as the second‐largest plastic in volume after the polyolefins and above styrene polymers, the control of the free‐radical polymerization of vinyl chloride (VC) is of high industrial and academic interest. But still the term “controlled” polymerization is not yet clearly defined. Often it is used for quasi‐living polymerizations with equilibrium reactions in the initiation and/or termination step or for the control of the molecular weight distribution (MWD), but it can also be applied to several structural aspects such as stereochemistry, branching, or special technical properties. In the present article, the control of chain growth and chain transfer is discussed. It has been well known for many years that the propagation step in the VC polymerization is terminated to a large degree by the rather frequent and temperature‐dependent chain transfer of the growing macromolecules to the monomer. Therefore, the degree of polymerization is strongly governed by the polymerization temperature. However, this transfer step does not result in a controlled or a narrow MWD. By means of free‐radical nitroxide‐mediated polymerization of VC in suspension, PVC with a narrower MWD can be obtained also at higher polymerization temperatures. The resulting PVC with nitroxide end groups can act as a macro‐initiator for various monomers, resulting in two‐block copolymers, which are, e.g., interesting compatibilizers in blends with PVC. J. VINYL ADDIT. TECHNOL., 11:86–90, 2005. © 2005 Society of Plastics Engineers     

Preparation of well‐defined block copolymer having one polystyrene segment and another poly(styrene‐alt‐maleic anhydride) segment with RAFT polymerization

Block copolymers, polystyrene‐b‐poly(styrene‐co‐maleic anhydride), have been prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization technique using three different approaches: 1‐phenylethyl phenyldithioacetate (PEPDTA) directly as RAFT agent, mediated polystyrene (PS) block as the macromolecular PS‐RAFT agent and mediated poly(styrene‐maleic anhydride) (SMA) block with alternating sequence as the macromolecular SMA‐RAFT agent. Copolymers synthesized in the one‐step method using PEPDTA as RAFT agent possess one PS block and one SMA block with gradient structure. When the macromolecular RAFT agents are employed, copolymers with one PS block and one alternating SMA block can be produced. However, block copolymers with narrow molecular weight distribution (MWD) can only be obtained using the PS‐RAFT agent. The MWD deviates considerably from the typical RAFT polymerization system when the SMA is used as the RAFT agent. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

聚偏氟乙烯-b-聚乙烯基吡咯烷酮嵌段共聚物的制备和结构

以C₆F₁₃I为链转移剂,通过碘转移乳液聚合制得碘封端的聚偏氟乙烯（PVDF-I）,再以PVDF-I为大分子链转移剂进行N-乙烯基吡咯烷酮碘转移溶液聚合,得到聚偏氟乙烯-b-聚乙烯基吡咯烷酮（PVDF-b-PVP）两亲性嵌段共聚物;采用NMR、IR、XRD、DSC和AFM等对PVDF-b-PVP嵌段共聚物的分子和相态结构进行了表征。发现PVP能有效嵌入PVDF与末端碘之间,PVDF嵌段PVP后,PVDF分子链的有序度明显降低,产生γ晶型PVDF,同时结晶温度和结晶度降低。PVDF-b-PVP嵌段共聚物表现微相分离结构,相分离尺寸约20 nm,其亲水性也优于PVDF均聚物。     

Poly(vinyl chloride)‐b‐poly(hydroxypropyl acrylate)‐b‐Poly(vinyl chloride): Understanding the synthesis of an amphiphilic PVC block copolymer on a pilot scale

The aim of this work was to develop an understanding of the major difficulties associated with the scale‐up of the technology for the synthesis of poly(vinyl chloride) (PVC) block copolymers that contain hydrophilic segments, thus providing important directions to be followed in order to produce such new materials on the industrial scale. The synthesis was carried out in a two‐step process. First, the macroinitiator α,ω‐di(iodo)poly(hydroxypropyl acrylate) was synthesized in an aqueous medium by (single electron transfer)/(degenerative chain transfer) living radical polymerization (SET‐DTRP) catalyzed by Na₂S₂O₄. The block copolymer was then prepared by SET‐DTRP of vinyl chloride (VC) from the iodine‐terminal active chain ends of the macroinitiator, thereby leading to the formation of the block copolymer poly(vinyl chloride)‐b‐poly(hydroxypropyl acrylate)‐b‐poly(vinyl chloride). This report covers important aspects related to the characterization of the block copolymer produced and to the identification of the major limitations that must be overcome in order to produce this new material on the industrial scale. The results clearly show the differences between the theoretical predictions and the block copolymer compositions obtained by using a suspension polymerization method, which is the most‐used polymerization process in the PVC industry. J. VINYL ADDIT. TECHNOL., 19:94–104, 2013. © 2013 Society of Plastics Engineers     

含聚乙二醇的嵌段共聚物的合成及自组装研究进展

综述了通过活性自由基聚合如原子转移自由基聚合（ATRP）、氮氧稳定自由基聚合（NMP）、可逆加成断裂链转移聚合（RAFT）等方法合成含聚乙二醇（PEG）的嵌段共聚物的研究进展,并对含PEG类嵌段共聚物在溶液中的自组装技术和在药物载体、介孔材料以及碳纳米管中的应用进行了归纳,指出含PEG的嵌段共聚物可以自组装成多种形貌,直接影响材料的性能和应用,所以这些结构有潜在的应用价值和应用前景,并且合成新的含PEG的嵌段共聚物和开发具有新型结构、形貌可控的自组装体以及新的应用领域是今后的一个热点问题,具有重要的科学研究意义和实际应用价值。     

宽分子量分布高聚合度PVC的合成和性能

针对高聚合度聚氯乙烯加工性能较差的缺点，采用２段聚合温度法合成了宽分子量分布的ＰＶＣ树脂，并对树脂的热稳定性、加工性能和力学性能进行了研究。     

Influences of individual and composed poly(vinyl alcohol) suspending agents on particle morphology of suspension poly(vinyl chloride) resin

Effects of individual and composed poly(vinyl alcohol) (PVA) suspending agents on the particle morphology of poly(vinyl chloride) (PVC) resins were investigated and discussed in the view of PVA absorption at the oil/water interface and interfacial behavior. It was shown that the percentage and surface coverage of PVA at the oil/water interface decreased with the increase of the degree of hydrolysis (DH) of PVA in the DH range of 70–98 mol %, while the interfacial tension of VC/PVA aqueous solution increased linearly with the increase of DH of PVA. PVC resin with more regular particle shape, increased agglomeration and fusion of primary particles, lower porosity and higher bulk density, was prepared by using PVA with a higher DH as a suspending agent. This was caused by the occurrence of drop coalescence at the very early stage of VC polymerization, the increase of particle shrinkage, and the lower colloidal protection to primary particles. It was also shown that the interfacial tension of VC/water in the presence of composed PVA suspending agents varied linearly with the weight composition of the composed PVA suspending agents. The particle properties of PVC resin prepared by using the composed PVC suspending agents were usually situated in between the properties of PVC resins prepared by using the corresponding individual PVA suspending agent. The particle morphology and properties of PVC resin could be controlled by the suitable choice of the composed PVA suspending agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3848–3855, 2003