一种改进的数据链协作MAC协议

针对基于TDMA（时分多址）的数据链网络协议在恶劣环境下时延大、业务突发性强等缺点,提出了一种改进的数据链协作MAC协议。在原有的协议中引入协作通信的思想,节点根据协作机制,利用自身时隙进行协作转发,并进一步加入中继优先权因子改进协作机制,中继节点根据节点的繁忙程度与信道条件来判定是否协作传输。通过对网络时延性能的研究与仿真,结果表明,改进后的协作协议性能优于传统的数据链协议。     

Analysis and determination of cooperative MAC strategies from throughput perspectives

In recent years, cooperative communication has been developed as a new communication strategy that incorporates a relay node to assist direct point-to-point transmission. By exploiting cooperative diversity, different types of techniques have been proposed to improve transmission reliability from the physical layer perspective. However, owing to the longer transmission time resulting from the cooperative schemes, there is no guarantee to enhance network throughput in view of the medium access control (MAC) performance. In this paper, system throughput of combined direct/cooperative communication is evaluated by exploiting the proposed analytical model based on the IEEE 802.11 MAC protocol. The feasibility of adopting either cooperative or direct communication is also studied in the analytical model. In terms of network throughput, whether to adopt cooperative schemes depends on the tradeoff between cooperative transmission delay and channel quality of direct communication. Moreover, two cooperative MAC protocols are proposed to determine the circumstances to activate cooperative communication according to the channel quality. The full-channel quality indicator based cooperative (FCC) MAC protocol is introduced to choose both the transmission scheme and the relay node according to the full channel quality information. However, the overhead caused by the FCC scheme can degrade the throughput performance as the number of available relays is significantly increased. Therefore, the bitwise competition based cooperative (BCC) MAC protocol is utilized to efficiently determine a feasible relay node for data transmission. Simulations are performed to validate the effectiveness of proposed analytical models and cooperative MAC protocols. It is observed that the proposed BCC scheme can outperform both the FCC protocol and conventional direct transmission with enhanced system throughput.     

Cooperative relay to improve diversity in cognitive radio networks

Recent studies demonstrated that dynamic spectrum access can improve spectrum utilization significantly by allowing secondary unlicensed users to dynamically share the spectrum that is not used by the primary licensed users. Cognitive radio was proposed to promote the spectrum utilization by opportunistically exploiting the existence of spectrum ?holes.? Meanwhile, cooperative relay technology is regarded widely as a key technology for increasing transmission diversity gain in various types of wireless networks, including cognitive radio networks. In this article, we first give a brief overview of the envisioned applications of: cooperative relay technology to CRNs, cooperative transmission of primary traffic by secondary users, cooperative transmission between secondary nodes to improve spatial diversity, and cooperative relay between secondary nodes to improve spectrum diversity. As the latter is a new direction, in this article we focus on this scenario and investigate a simple wireless network, where a spectrum-rich node is selected as the relay node to improve the performance between the source and the destination. With the introduction of cooperative relay, many unique problems should be considered, especially the issue for relay selection and spectrum allocation. To demonstrate the feasibility and performance of cooperative relay for cognitive radio, a new MAC protocol was proposed and implemented in a universal software radio peripheral-based testbed. Experimental results show that the throughput of the whole system is greatly increased by exploiting the benefit of cooperative relay.     

A Store-and-Forward Cooperative MAC for Wireless Ad Hoc Networks

Cooperative communications are widely used to increase the throughput of wireless networks. It is important to select the appropriate relay nodes to enhance the performance of cooperative communications. In wireless ad hoc networks, such as IEEE802.11 WLAN, the distributed MAC is used to share the wireless channel to different nodes. In this work, a simple store-and-forward cooperative MAC (SFC-MAC) is proposed, which is fully compatible with IEEE 802.11 MAC. In SSF-MAC, the relay node just stores the packets received from the sender and forward them to the receiver after it successfully contend the channel. Furthermore, an model is built to analyze the performance of relay methods in the ideal channel and imperfect channel. We utilize throughput performance as a metric to determine whether a relay node is selected. The analysis and simulation results show that the proposed simple SSF-MAC can increase the system throughput.     

An efficient MAC protocol with cooperative retransmission in mobile ad hoc networks

In emerging wireless networks, cooperative retransmission is employed to replace packet retransmission between a pair of sender and receiver with poor channel condition. A cooperative MAC protocol which utilizes such benefit is proposed in this paper to improve the network performance in mobile ad hoc networks. In the proposed protocol, relay nodes between sender and receiver are used if the sender cannot communicate with the receiver reliably. Furthermore, the receiver may also stop forwarding the received data frame if the frame is received by the next‐hop receiver on the route to the final destination node. Simulation results show that the proposed protocol outperforms previous works in terms of increased transmission reliability and reduced delay time. Copyright © 2010 John Wiley & Sons, Ltd.     

无线移动网络的协作通信方案研究

结合具体的无线Ad hoc网络,提出了机会性的根据网络实时状况选择最佳中继的协作MAC协议,并在NS-2仿真平台上实现,仿真结果表明,较常规的802.11 DCF协议,协作MAC方案有效地提高了网络的递交率。此外对采用RCPC编码协作的MAC协议进行了数值仿真。这些协议和方案可以直接或修改后应用于现有的Ad hoc等无线网络,在一定程度上可以实现跨层的机会协作通信和组网方案。     

无线自组织网络MAC帧传输技术研究

无线自组织网络是近年来科学研究的热点领域之一,具有很强的实际应用价值和广泛的应用前景。实现MAC帧传输是无线自组织网络要解决的关键问题之一。采用基于路由的传输方式,可以有效实现MAC帧传输。首先通过路由生成协议和路由维护协议建立起稳定的路由,然后MAC帧将源节点中的路由封装到MAC帧头作为传输路径,最后MAC帧沿路由预定的路径,以多跳中继的方式到达目的节点。     

Exact Outage Probability of Two-Way Decode-and-Forward Scheme with Opportunistic Relay Selection Under Physical Layer Security

The combination of cooperative communication and physical layer security is an effective approach to overcome the disadvantages of the fading environment as well as to increase the security capacity of the wireless network. In this paper, we propose a two-way decode-and-forward scheme with a relay selection method. In the proposed protocol, two source nodes communicate with each other with the help of intermediate relays under the eavesdropping of another wireless node, called the eavesdropper node. The best relay, which is chosen by the max–min strategy, uses digital network coding to enhance secure communication and spectrum use efficiency. The system performance is analyzed and evaluated in terms of the exact closed-form outage probability over Rayleigh fading channels. The Monte-Carlo simulation results are presented to verify the theoretical analysis. Finally, the proposed protocol is compared with the two-way protocol, which does not use digital network coding.     

IAMMAC: an interference‐aware multichannel MAC protocol for wireless sensor–actor networks

In this paper, we discuss an interference aware multichannel MAC (IAMMAC) protocol assign channels for communication in wireless sensor‐actor networks. An actor acts as a cluster head for k‐hop sensors and computes the shortest path for all the sensors. Then, the actor partitions the cluster into multiple subtrees and assigns a noninterference channel to each subtree. The actor 1‐hop sensors are represented as relay nodes. The actor selects a relay node as a backup cluster head (BCH) based on the residual energy and node degree. After selecting a BCH from the relay nodes, the actor broadcast this information to the remaining relay nodes using the common control channel. The relay sensors use the same channel of BCH to communicate with it. However, the other cluster members do not change their data channel. Further, interference‐aware and throughput‐aware multichannel MAC protocol is also proposed for actor–actor coordination. The performance of the proposed IAMMAC protocol is analyzed using standard network parameters such as packet delivery ratio, goodput, end‐to‐end delay, and energy dissipation in the network. The obtained simulation results indicate that the IAMMAC protocol has superior performance as compared with the existing MAC protocols. Copyright © 2015 John Wiley & Sons, Ltd.     

采用模拟网络编码的认知中继网络双向通信的最优功率分配

Cognitive radio and cooperative communication can greatly improve the spectrum efficiency in wireless communications. We study a cognitive radio network where two secondary source terminals exchange their information with the assistance of a relay node under interference power constraints. In order to enhance the transmit rate and maintain fairness between two source terminals, a practical 2-phase analog network coding protocol is adopted and its optimal power allocation algorithm is proposed. Numerical results verify the superiority of the proposed algorithm over the conventional direct transmission protocol and 4-phase amplify-and-forward relay protocol.     

Energy efficient network coding-based MAC for cooperative ARQ wireless networks

In this paper we introduce a network coding-aided energy efficient Medium Access Control (MAC) protocol that coordinates the transmissions among a set of relay nodes which act as helpers in cooperative Automatic Repeat reQuest-based (ARQ-based) wireless networks. Applying network coding techniques, we achieve to increase the energy efficiency of the network without compromising the system performance in terms of Quality of Service. Our proposed solution is evaluated by both analytical and simulation results.     

DEC-MAC: delay- and energy-aware cooperative medium access control protocol for wireless sensor networks

This paper deals with two critical issues in wireless sensor networks: reducing the end-to-end packet delivery delay and increasing the network lifetime through the use of cooperative communications. Here, we propose a delay- and energy-aware cooperative medium access control (DEC-MAC) protocol, which trades off between the packet delivery delay and a node’s energy consumption while selecting a cooperative relay node. DEC-MAC attempts to balance the energy consumption of the sensor nodes by taking into account a node’s residual energy as part of the relay selection metric, thus increasing the network’s lifetime. The relay selection algorithm exploits the process of elimination and the complementary cumulative distribution function for determining the most optimal relay within the shortest time period. Our numerical analysis demonstrates that the DEC-MAC protocol is able to determine the optimal relay in no more than three mini slots. Our simulation results show that the DEC-MAC protocol improves the end-to-end packet delivery latency and the network lifetime significantly compared to the state-of-the-art protocols, LC-MAC and CoopMAC.     

An efficient MAC protocol for cooperative diversity in mobile ad hoc networks

Cooperative diversity is proposed to combat the detrimental effects of channel fading. In this paper, we investigate the effectiveness of cooperative diversity in interference limited ad hoc networks. The negative effects due to relay blocking on the network throughput are investigated. We show that the relay blocking problem is mainly dependent on the relay selection criterion. To overcome this problem, we propose a new cooperative diversity technique based on a modified IEEE 802.11 Medium Access Control (MAC) protocol. The throughput performance of the proposed MAC protocol is analyzed using a random structured network where nodes are assumed to be equipped with multiple antennas. In our simulations, we consider both single‐ and multiple‐relay scenarios over fading channels. Copyright © 2007 John Wiley & Sons, Ltd.     

Cooperative quadrature physical layer network coding in wireless relay networks

This paper proposes a cooperative quadrature physical layer network coding (CQPNC) scheme for a dual‐hop cooperative relay network, which consists of two source nodes, one relay node and one destination node. All nodes in the network have one antenna, and the two source nodes transmit their signals modulated with quadrature carriers. In this paper, a cooperative quadrature physical layer network coded decode‐and‐forward (DF) relay protocol (CQPNC‐DF) is proposed to transmit the composite information from the two source nodes via the relay node to the destination node simultaneously to reduce the number of time slots required for a transmission. The proposed CQPNC‐DF relay protocol is compared with time‐division multiple‐access amplify‐and‐forward (TDMA‐AF), TDMA‐DF, cooperative network coded DF (CNC‐DF) and cooperative analog network coded AF (CANC‐AF) relay protocols to demonstrate its effectiveness in terms of bit error rate (BER) and system throughput under different propagation conditions. The simulation results reveal that the proposed CQPNC‐DF relay protocol can significantly improve the network performance. Compared with two TDMA schemes and CNC‐DF, the proposal can provide up to 100% and 50% throughput gains, respectively. Moreover, no matter what the scene, the proposed scheme always has the lowest BER in the low SNR region. Copyright © 2013 John Wiley & Sons, Ltd.     

Trust establishment in cooperative wireless relaying networks

In cooperative wireless networks, relay nodes are employed to improve the performance of the network in terms of throughput and reliability. However, the presence of malicious relay nodes in the network may severely degrade the performance of the system. When a relay node behaves maliciously, there exists a possibility that such a node refuses to cooperate when it is selected for cooperation or deliberately drops the received packets. Trust establishment is a mechanism to detect misbehaving nodes in a network. In this paper, we propose a trust establishment method for cooperative wireless networks by using Bayesian framework. In contrast with the previous schemes proposed in wireless networks, this approach takes the channel state information and the relay selection decisions into account to derive a pure trust value for each relay node. The proposed method can be applied to any cooperative system with a general relay selection policy whose decisions in each cooperative transmission are independent of the previous ones. Moreover, it does not impose additional communication overhead on the system as it uses the available information in relay selection procedure. Copyright © 2012 John Wiley & Sons, Ltd.     

基于SMAC的无线传感器网络MAC协议的分析与优化

首先对MAC协议进行了相关介绍。然后重点介绍了一种基于竞争的无线传感器网络MAC层协议S-MAC协议。其核心是提出了一种新的无线传感器网络的MAC协议设计方案。基于动态调整占空比的思想,提出了ATC-SMAC协议。该协议在S-MAC协议的基础上改进了固定占空比的劣势,根据每个节点上的数据包的平均延迟调整占空比。通过动态地调整每个节点的占空比,使不同流量的节点拥有不同的工作时间,协议根据不同节点的流量情况自适应地对其占空比进行调整。经过仿真试验,得到ATC-MAC在网络端对端延迟、能量消耗以及吞吐量方面较S-MAC协议都有比较明显的提高。     

基于中继的协作频谱感知

频谱感知技术是认知无线电系统实现的前提和基础。由于无线衰落环境下单节点频谱感知结果可靠性不高,主要讨论协作频谱感知中的中继协作频谱感知技术。针对单个中继节点的协作频谱感知网络,分析了在AF协议下的频谱感知结果。导出了在瑞利衰落环境下中继节点参与协作感知的检测概率上限的闭合表达式,并进行了数值仿真。数值分析结果表明中继节点参与协作能够提高频谱感知性能。     

基于网络编码与空时编码的协作MAC协议

针对无线ad hoc网络中协作造成的中继效率低以及不同QoS需求难以满足等问题,提出了一种联合网络编码和空时编码的协作MAC协议(NSTCMAC)。NSTCMAC将网络编码与空时编码技术相结合,设计出区分业务类型的协作MAC协议传输机制,以满足不同业务类型的QoS需求;进一步通过马尔科夫链模型分析了区分业务类型的协作机制及性能。仿真结果表明,相比传统的DCF、COOPMAC以及CD-MAC协议,NSTCMAC协议能更好地保证不同的QoS需求,并能有效地解决协作造成的中继效率低的问题。     

一种用于AdHoc网络的协同MAC协议

基于IEEE802．11 DCF模型,利用协同分集技术,提出了一种适用于AdHoc网络的协同MAC协议。此协议在目的节点实时选择传输模式和协同节点,可有效减小节点移动和信道变化对网络性能产生的影响。同时,利用分集技术,对源节点和协同节点的数据信号进行最大比合并（MRC）,可有效提高系统的可靠性。仿真结果表明,在文中的仿真条件下,和传统IEEE802．11DCF协议相比,该协议在系统分组递交率和延迟性能上分别提高了20％和50％。     

Minimum Error Probability Cooperative Relay Design

In wireless networks, user cooperation has been proposed to mitigate the effect of multipath fading channels. Recognizing the connection between cooperative relay with finite alphabet sources and the distributed detection problem, we design relay signaling via channel aware distributed detection theory. Focusing on a wireless relay network composed of a single source-destination pair with L relay nodes, we derive the necessary conditions for optimal relay signaling that minimizes the error probability at the destination node. The derived conditions are person-by-person optimal: each local relay rule is optimized by assuming fixed relay rules at all other relay nodes and fixed decoding rule at the destination node. An iterative algorithm is proposed for finding a set of relay signaling approaches that are simultaneously person-by-person optimal. Numerical examples indicate that the proposed scheme provides performance improvement over the two existing cooperative relay strategies, namely amplify-forward and decode-forward