Fluorescent polymer with CdTe quantum dots and 1,8‐naphthahmide fluorescent polymer: Synthesis,characterization, and FRET

In this paper, we reported a new method to fabricate CdTe quantum dots (CdTe QDs), which were synthesized in aqueous solution using thioglycolic acid and L ‐phenylalanine (L ‐Phe) as costabilizing agent. Then, they were transferred into organic phase with the assistance of cetyltrimethylammonium bromide (CTAB) for further utilization. Finally, we use toluene diisocyanate as a bridge between CdTe QDs and polyacrylate (CPA), whose side chain has hydroxyl group, to synthesize a fluorescent composite polymer CdTe‐CPA. In addition, we synthesized an organic substance 4‐[2,4‐di(tert‐butyl)]phenoxy‐N‐(2‐hydroxyethyl)‐1,8‐naphthalimide (N), and obtained 1,8‐naphthahmide fluorescent polymer N‐CPA in the same way as it did on CdTe‐CPA. The resulting materials were characterized by Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), transmission electron microscope (TEM), and photoluminescence (PL). Then, we studied the fluorescence resonance energy transfer (FRET) between CdTe‐CPA and N‐CPA. The data obtained from absorption and fluorescence emission spectral indicated that the FRET from N‐CPA to CdTe‐CPA could be efficiently triggered in the solution of chloroform. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of styrene–acrylic ester copolymers

Homopolymers and copolymers of styrene and different acrylic esters (i.e., acrylates) were synthesized by the free‐radical solution polymerization technique. Feed ratios of the monomers styrene and cyclohexyl acrylate/benzyl acrylate were 90 : 10, 75 : 25, 60 : 40, 50 : 50, 40 : 60 and 20 : 80 (v/v) in the synthesis of copolymers. All 6 homopolymerizations of acrylic ester synthesis were carried out in N,N(dimethyl formamide) except for the synthesis of poly(cyclohexyl acrylate) (PCA), where the medium was 1,4‐dioxane. Benzoyl peroxide (BPO) and azobisisobutyronitrile (AIBN) were used as initiators. The polymers synthesized were characterized by FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and viscosity measurements. The reactivity ratios were determined by the Fineman–Ross method using ¹H‐NMR spectroscopic data. The reactivity ratios (r) for the copolymerization of styrene (r_S) with cyclohexyl acrylate (r_CA) were found to be r_S = 0.930 and r_CA = 0.771, while for the copolymerization of styrene with benzyl acrylate, the ratios were found to be r_S = 0.755 and r_BA = 0.104, respectively. The activation energies of decomposition (E_a) and glass‐transition temperature (T_g) for various homo‐ and copolymers were evaluated using TGA and DSC analysis. The activation parameters of the viscous flow, voluminosity (V_E) and shape factor (ν) were also computed for all systems using viscosity data. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1513–1524, 2001     

Synthesis,characterization, and bactericidal properties of composites based on crosslinked resins containing silver

Two different commercial crosslinked resins (Amberlite GT73 and Amberlite IRC748) were employed for anchoring silver. The ? SH and ? N(CH₂COOH)₂ groups, respectively, present on these resins were used for Ag⁺ chelation from an aqueous solution. The Ag⁺ ions were reduced with three different reductants: hydrazine, hydroxylamine, and formaldehyde (under an alkaline pH). The produced composites were characterized with thermogravimetry/differential thermogravimetry and scanning electron microscopy combined with a backscattered scanning electron detector. Energy‐dispersive X‐ray spectroscopy coupled to scanning electron microscopy allowed the observation of submicrometer particles of silver, and chemical microanalysis of emitted X‐rays revealed the presence of metal on the internal and external surfaces of the composite microspheres. The amount of incorporated silver was determined by titration. The antibacterial activity of the silver/resin composites was determined toward 10³–10⁷ cells/mL dilutions of the auxotrophic AB1157 Escherichia coli strain; the networks containing anchored submicrometer silver particles were completely bactericidal within a few minutes because of the combined action of silver and functional groups of the resins. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hybrid organic/inorganic dendritic triblock copolymers: Synthesis,nanostructure characterization,and micellar behavior

A new class of amphiphilic dendritic ABA triblock copolymers, which is based on organic linear polyethylene oxide (PEO) and inorganic dendritic carbosiloxane (CSO) was synthesized. The strategy used in synthesizing these materials is based on divergent method using hydrosilylation‐alcoholysis cycles. The reaction conditions and structural features of dendrimers were analyzed by different physicochemical techniques such as: GPC, NMR, UV spectroscopy, DSC, and viscometry. The generational limit of dendrimer after the first generation, OSC‐D‐PEO‐D‐CSO, forced us to employ HSiCl₂CH₃ as branching reagent. Also further hydrosilylation of the third generation yielded an irregular structure species. Self‐assembling and morphological studies of first, OSC‐D‐PEO‐D‐CSO, and second, OSC‐D‐PEO‐D‐CSO, generations in aqueous medium were monitored by using fluorescence, TEM and DLS techniques. However, the dendritic block copolymer with third generation, OSC‐D‐PEO‐D‐CSO, could not be dispersed in aqueous phase. The diameters of denderitic micelles had a narrow distribution in the ranges of 69 and 88 nm, respectively. Although the micelles were stable even in first generation, partition equilibrium constants of pyrene and critical micelle concentration in both of dendritic micelles imply that the micellar behaviors of the supramolecules strongly depend on the hydrophobic block's size in which increasing generation effectively promoted the micelle formation. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of phosphorus‐containing flame‐retardant antistatic copolymers and their applications in polypropylene

By adjusting the molar ratios of antistatic monomer of octyl phenol ethylene oxide acrylate (denoted as AS), rigid monomer of methyl methacrylate (denoted as MMA), and flame‐retardant monomer of 2‐(phosphoryloxymethyl oxyethylene) acrylate (denoted as FR), a series of flame‐retardant antistatic copolymers poly (octyl phenol ethylene oxide acrylate‐co‐methyl methacrylate‐co‐phosphoryloxymethyl oxyethylene acrylate) (donated as AMF) were synthesized through radical polymerization. Among the obtained copolymers, two copolymers, AMF162 (the feed molar ratio of AS, MMA, and FR as 1 : 6 : 2) and AMF1104 (the feed molar ratio of AS, MMA, and FR as 1 : 10 : 4) with different concentrations were added into polypropylene (PP) to prepare PP‐AMF162 and PP‐AMF1104 series of composites. The thermal stability, limiting oxygen index, the antistatic property, and mechanical properties of PP composites were tested and analyzed. PP‐AMF162 series composites have excellent antistatic effect. When the AMF162 content was equal to or <15 wt %, the impact strength of PP‐AMF162 composites was higher than that of pure PP. The results indicated that copolymer AMF162 was a suitable flame‐retardant and antistatic additive for PP. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41677.     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of novel organotin monomers and copolymers and their antibacterial activity

Two novel organotin monomers, (N‐tri‐n‐butyltin) maleimide and m‐acryloylamino‐(tri‐n‐butyltin benzoate), were synthesized. Copolymerization of these two monomers with styrene was carried out in the bulk at 65°C using asobisisobutyronitrile as the free radical initiator. The monomers and copolymers were characterized by elemental analysis; the molecular weights of the copolymers were determined by GPC, solubility, IR, and ¹H‐NMR spectral studies. The antibacterial activities of the synthesized organotin monomers and copolymers toward various types of bacteria were also reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 740–745, 2000     

Synthesis and characterization of graft copolymers of syndiotactic polystyrene with polybutadiene and 4‐methylstyrene

The basic method for synthesizing syndiotactic polystyrene‐g‐polybutadiene graft copolymers was investigated. First, the syndiotactic polystyrene copolymer, poly(styrene‐co‐4‐methylstyrene), was prepared by the copolymerization of styrene and 4‐methylstyrene monomer with a trichloro(pentamethyl cyclopentadienyl) titanium(IV)/modified methylaluminoxane system as a metallocene catalyst at 50°C. Then, the polymerization proceeded in an argon atmosphere at the ambient pressure, and after purification by extraction, the copolymer structure was confirmed with ¹H‐NMR. Lastly, the copolymer was grafted with polybutadiene (a ready‐made commercialized unsaturated elastomer) by anionic grafting reactions with a metallation reagent. In this step, poly(styrene‐co‐4‐methylstyrene) was deprotonated at the methyl group of 4‐methylstyrene by butyl lithium and further reacted with polybutadiene to graft polybutadiene onto the deprotonated methyl of the poly(styrene‐co‐4‐methylstyrene) backbone. After purification of the graft copolymer by Soxhlet extraction, the grafting reaction copolymer structure was confirmed with ¹H‐NMR. These graft copolymers showed high melting temperatures (240–250°C) and were different from normal anionic styrene–butadiene copolymers because of the presence of crystalline syndiotactic polystyrene segments. Usually, highly syndiotactic polystyrene has a glass‐transition temperature of 100°C and behaves like a glassy polymer (possessing brittle mechanical properties) at room temperature. Thus, the graft copolymer can be used as a compatibilizer in syndiotactic polystyrene blends to modify the mechanical properties to compensate for the glassy properties of pure syndiotactic polystyrene at room temperature. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of silicon-containing graft copolymers

Poly(4-t-butoxycarbonyloxystyrene)-g-poly(dimethylsiloxane) and poly(t-butylmethacrylate)-g-poly(dimethylsiloxane) with various chemical compositions were synthesized via free radical polymerization of 4-t-butoxycarbonyloxystyrene (TBCS) or t-butylmethacrylate (TBMA) with silicone macromers. These macromers were prepared by anionic ring-opening polymerization of hexamethylcyclotrisiloxane (D₃) and subsequent termination with a chlorosilane compound having a methacrylate functionality. The morphology of the graft copolymer systems was investigated by DSC and TEM.     

Synthesis of phosphonated styrenic copolymers and their chemical modifications

We report, for the first time, the synthesis of a phosphonated styrenic monomer dimethyl vinylbenzyl phosphonate (VBP) according to the methods described in the literature for its equivalent diethyl vinylbenzyl phosphonate, and also the monodealkylation of this monomer (VBP) to the monosalt in a neutral medium and to the corresponding monoacid via a sulfonic resin. Various statistical copolymers and statistical block copolymers of styrene and VBP were prepared with different molar percentages of these comonomers. The dealkylation of statistical copolymers was carried out in the same way as for VBP. The phosphonated statistical copolymers, prepared, were characterized by various analytical methods which show good agreement with their structures. © 2002 Society of Chemical Industry     

Synthesis and characterization of soluble poly(N-heptyl indole)

In view of preparing soluble polyindole, indole was N-alkylated using bromoheptane and polymerized to poly(N-heptyl indole) which is soluble in common organic solvents. This process is being reported for the first time. Poly(N-heptyl indole) was characterized by spectral, thermal methods and it shows photoluminescence in liquid state.     

Synthesis and characterization of poly(dimethylsiloxane)–polythiophene composites

The synthesis was performed by the electropolymerization of thiophene on a poly(dimethylsiloxane) (PDMS)‐coated platinum electrode at 2.2 V with tetrabutylammoniumtetrafloroborate (TBAFB) as a supporting electrolyte and with acetonitrile as a solvent. The characterization of the PDMS–polythiophene (Pth) composites was carried out with cyclic voltammetry, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and conductivity measurements. The observed conductivities of the PDMS composites were 2.2–5.2 S/cm. The conductivity of Pth did not change appreciably with the addition of up to 30% insulating PDMS, but its processability improved. FTIR, SEM, and DSC studies showed the existence of a strong interaction, rather than physical adhesion, between PDMS and Pth. Highly flexible and foldable PDMS–Pth composites were obtained. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2113–2119, 2003     

蓝色发光纳米硫化铟的合成及表征

采用金属有机合成法在280℃下合成得到蓝色发光的In2S3纳米晶体,近似球形,平均粒径为3.09 nm。XRD结果表明,该晶体属于立方晶系,空间群为Fd-3m。HRTEM图中晶格条纹清晰且连续,表明In2S3晶体结晶度好,因而其发光具有较高的荧光量子产率(最高可达8%)。其荧光光谱的Stokes位移最高达到180 nm,可以有效消除一个纳米粒子对另一纳米粒子光致发光的再吸收,并有效抑制它们之间的能量共振转移现象。In2S3纳米晶体荧光衰减曲线符合单指数衰减公式,荧光寿命为9.28 ns,其蓝色荧光源自晶体表面的缺陷发光。     

Novel fluorene-based light-emitting copolymers containing cyanophenyl pendants and carbazole-triphenylamines: Synthesis, characterization and their PLED application

A series of novel blue light-emitting copolymers PCC-1, PCC-2, and PCC-3, composed of different ratios of electron-withdrawing segments (spirobifluorene substituted with cyanophenyl groups) and electron-donating segments (carbazole-triphenylamines), has been synthesized and characterized. In order to investigate the effect of hole/electron charge transporting segments, two reference polymers PSF and PCF, containing only one charge transporting moiety in the polymer backbone, were also synthesized. Incorporation of the rigid spirobifluorene units substituted with cyanophenyl groups into the polymer backbone improved not only the thermal stabilities but also the photoluminescence efficiencies. The polymers except PSF possess similar hole injection barriers but different hole transporting abilities. With the device configuration of ITO/PEDOT:PSS/polymers:PBD/CsF/Ca/Al, PCC-2 showed the best performance with the lowest turn-on voltage of 3.1 V, the highest luminance of 6369 cd/m², the highest current efficiency of 1.97 cd/A, and the best power efficiency of 1.40 lm/w.     

Synthesis and characterization of functionalized syndiotactic polystyrene copolymers

Functionalized syndiotactic polystyrene copolymers were synthesized and characterized. The syndiotactic polystyrene copolymers, poly(styrene‐co‐4‐methylstyrene) (sPSMS), were prepared by styrene with 4‐methylstyrene with a metallocene/methylaluminoxane catalyst. In addition, grafted copolymers, chemically grafted with isoprene onto an sPSMS backbone [poly(styrene‐co‐4‐methylstyrene)‐g‐polyisoprene (sPSMS‐g‐PIP)] were synthesized by anionic grafting polymerization with a metallation reagent. In this study, we also examined the effect of the degree of functionalization (epoxidation) on the polymer structure of the sPSMS‐g‐PIP copolymers. Experimental results indicate that the crystallinity of the sPSMS‐g‐PIP copolymer was lower than that of the ungrafted sPSMS copolymer. Moreover, the epoxy‐containing sPSMS‐g‐PIP copolymer effectively increased the thermal stability more than did the sPSMS‐g‐PIP copolymer alone. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1038–1045, 2002     

Synthesis and characterization of ZnO nanostructures templated using diblock copolymers

The development of self‐assembled ZnO nanoparticles within a diblock copolymer matrix using wet chemical processing specific to ZnO is reported. Diblock copolymers consisting of polynorbornene and poly(norbornene–dicarboxcylic acid) (NOR/NORCOOH) were synthesized with a block repeat unit ratio of 400 for the first block and 50 for the second block, to obtain spherical microphase separation. The block copolymer self‐assembly was used to template the growth of ZnO nanoparticles by introducing a ZnCl₂ precursor into the second polymer (NORCOOH) block at room temperature and processing the copolymer by wet chemical methods to substitute the chlorine atoms with oxygen. X‐ray photoemission spectroscopy (XPS) verified the conversion of ZnCl₂ to ZnO by monitoring the disappearance of the Cl 1s peak and the shift in the binding energy of the Zn 2p³ peak in the high‐resolution spectra. The substitution of Cl by O was found to be a highly preferential process, whereby only one approach using a weak base (NH₄OH) succeeded in effectively replacing Cl with O to result in spherical ZnO nanoparticles having a size ranging from 7 to 15 nm, as determined by transmission electron microscopy. The development of such block copolymer‐templated ZnO nanoparticles% is important in enabling the functionalization of large‐area nanodevice technologies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1058–1061, 2003     

Synthesis and characterization of microcrystalline cellulose‐graft‐poly(methyl methacrylate) copolymers and their application as rubber reinforcements

In this study, redox‐initiated free radical graft copolymerization of microcrystalline cellulose (MCC) and methyl methacrylate (MMA) has been carried out in aqueous media to develop a novel cellulose‐based copolymer. Cerium ammonium nitrate was used as the initiator in the presence of nitric acid. Effects of monomer concentration, initiator concentration, polymerization time, and polymerization temperature on the graft parameters of copolymers were studied. The successful grafting copolymerization between MCC and MMA was validated through attenuated total reflection, wide‐angle X‐ray diffraction, field‐emission scanning electron microscopy, and thermal gravimetric analysis. In comparison to native MCC, the resultant copolymers exhibited enhanced thermal stability and better compatibility with natural rubber, suggesting its potential application as reinforcement material in rubber industry. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42666.     

Cationic fluorene-thiophene diblock copolymers: Aggregation behaviour in methanol/water and its relation to thin film structures

Optical spectroscopy and photophysical measurements on cationic fluorene-thiophene diblock copolymers in solution show distinct properties for the two blocks, with clear indications of singlet exciton migration from the polyfluorene to polythiophene blocks. Electrical conductivity measurements and small angle X-ray scattering studies show that different aggregates are formed in water and methanol. This may be associated both with different solubilities of the two blocks and with the effect of solvent on the degree of dissociation of the ionic part. Atomic force microscopy (AFM) shows that different nanostructures are deposited from the two solvents, with large, vesicular structures deposited on mica from methanolic solution. Aggregation behavior is also found to be modulated, and to lead to more rigid thiophene blocks, by addition of the oppositely charged surfactant sodium dodecylsulfate.     

Synthesis,characterization, and swelling behavior of alginate‐g‐poly(sodium acrylate)/kaolin superabsorbent hydrogel composites

A novel superabsorbent composite based on sodium alginate and the inorganic clay kaolin was synthesized via the graft copolymerization of acrylic acid (AA) in an aqueous medium with methylene bisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The effects of reaction variables, such as the MBA, AA, and APS concentrations and the alginate/kaolin weight ratio, on the water absorbency of the composite were systematically optimized. Evidence of grafting and kaolin interactions was obtained by a comparison of the Fourier transform infrared spectra of the initial substrates with that of the superabsorbent composite, and the hydrogel structure was confirmed with scanning electron microscopy. The results indicated that with an increasing alginate/kaolin weight ratio, the swelling capacity and gel content increased. The effects of various salt media were also studied, along with the swelling kinetics. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of fluorene-carbazole and fluorene-phenothiazine copolymers with carbazole and oxadiazole pendants for organic light emitting diodes

We report the synthesis and characterization of new series of the fluorene based polymers with carbazole and oxadiazole pendants for the generation of the white emission out of the EL device. In the fluorene backbone, hole transporting units such as carbazole or phenothiazine were incorporated to improve the EL brightness and efficiency. The PFCzOxd-co-PCzs and PFCzOxd-co-PPTZs in EL spectra showed maximum peaks at around 430 nm and additional large peaks at around 530 and 500 nm, respectively. In case of PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz, the EL spectra of the polymers showed two distinct peaks comprising the maximum at 427 nm, which corresponds to the EL spectra of the conjugated backbone, and additional broad peaks at around 540 and 530 nm, respectively. The CIE coordinates of the devices from PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz were (0.28, 0.33) and (0.25, 0.32), respectively, approaching the value of the standard white of National Television System Committee (NTSC) (0.33, 0.33).