Synthesis of TiO<Subscript>2</Subscript> Nanoparticles by Microemulsion/Heat Treated Method and Photodegradation of Methylene Blue

In this work, TiO₂ nanoparticles were prepared by microemulsion (ME)/heat treated method and its photodecomposition property of methylene blue. Microemulsion (ME) consisted of water, cyclohexane and an anionic surfactant such as bis (2-ethylhexyl) sodium sulfosuccinate (AOT). Titanium tetraisopropoxide (TTIP) was dropped into the ME solution and then then TiO₂ nanoparticles were formed by the hydrolysis reaction between TTIP in the organic solvent and the water in the core of ME. The smallest diameter of the particles was 20 nm in the system of cyclohexane with surfactant when the molar ratio of water to surfactant was 2. The effect of the process parameters (water/surfactant ratio, different temperatures) on the final characteristics has been investigated, in terms of structural phase and particle size. The TiO₂ nanoparticles were characterized by means of X-ray diffraction, Transmission and scanning electron microscopy, Fourier-Transformed infrared and differential thermal analysis. TiO₂ nanoparticles prepared in this condition were collected as amorphous powder, and converted to anatase phase at less than 350 °C, which is lower than the ordinal phase transition temperature. The crystallite size and crystallinity increase with an increase of heat treated s temperature. The particles are shown to have a spherical shape and have a uniform size distribution. The size of nanoparticles raises with an increase of water/surfactant ratio. In the photocatalytic decomposition of methylene blue, the photocatalytic activity is mainly determined by the crystallinity of TiO₂. In addition, the TiO₂ heat treated at 350 °C shows the highest activity on the photocatalytic decomposition of methylene blue (k = 1.7 × 10⁻² min⁻¹).     

Preparation, crystal structure, and photocatalytic activity of TiO2 films by chemical vapor deposition

Photocatalytic activities of TiO₂ films were experimentally studied. TiO₂ films with different crystal structures (amorphous, anatase, rutile) were prepared by a Low Pressure Metal Organic Chemical Vapor Deposition (LPMOCVD) at different reaction temperatures and also by a Sol-Gel method using TTIP (Titanium Tetra Iso-Pro-poxyde). The Effect of CVD preparation method, CVD reaction conditions, crystal structure and wave-length of UV light on the photocatalytic decomposition rate of methylene blue in aqueous solution were studied. First, the characteristics of CVD preparation of TiO₂ films, such as the CVD film growth rate, crystal structure and morphology of the grown TiO₂ films, were experimentally studied as a function of CVD reaction temperature. Secondly, photocatalytic activities of TiO₂ films were evaluated by using two types of photo-reactors. The results indicated that TiO₂ films prepared by CVD exhibit higher photocatalytic activity than a catalyst prepared by the Sol-Gel method. Among the CVD grown TiO₂ films, anatase and rutile showed high photocatalytic activities. However, amorphous TiO₂ films showed lower activities. The activity of the photocatalysts of anatase films was excellent under all types of UV-lamps. The activity of CVD-prepared anatase films was four to seven times higher than that of photocatalyst films prepared by the Sol-Gel method.     

Microwave-hydrothermal synthesis of extremely high specific surface area anatase for decomposing NOx

Apparently C-doped and undoped or pure nanoparticles of anatase were synthesized using a microwave hydrothermal process in the temperature range of 140–180 °C for 1 h from several Ti precursors, such as Ti ethoxide, Ti isopropoxide and Ti oxysulfate. Nanoparticles of anatase samples were characterized by powder X-ray diffraction, transmission electron microscopy (TEM) and photocatalytic activity measurements. Results showed that nanoparticles in the size range of 4–17 nm of anatase were obtained in all cases with surface areas in the range of 151–267 m²/g. The photocatalytic activity of the prepared titanias was measured using methylene blue (MB) and NO_x molecules. Because MB has very strong adsorption on the samples, photocatalytic degradation under either solar light or black light irradiation was found to be very limited. However, the DeNO_x abilities of carbon-doped titanias were higher than those of Degussa P25 commercial titania sample and undoped or pure titanias especially under irradiation by long wavelength or visible light (>500 nm).     

Carbon-coated anatase: the role of the carbon layer for photocatalytic performance

Carbon-coated anatase-type TiO₂ was prepared by the heat treatment of powder mixtures of photocatalyst TiO₂ (ST-01) with different carbon precursors, poly(vinyl alcohol), hydroxyl propyl cellulose and poly(ethylene terephthalate), at a temperature between 700 and 900 °C for 1 h in an Ar gas flow. Since the carbon layers formed on the TiO₂ particles were porous, the samples prepared showed a high adsorptivity, in addition to the photoactivity of TiO₂. The carbon coating was shown to suppress the phase transition from photoactive anatase to much less active rutile, but seemed to reduce the amount of UV radiation reaching the surface of the TiO₂ particles. A balance among different factors controlled by the carbon layer on the TiO₂ particles was required to get high photocatalytic performance, i.e., high rate constant for the photodecomposition of methylene blue. On the sample prepared at 850 °C with a carbon content of about 3.5 wt%, the highest rate constant in the present work was obtained, in which the transition from anatase to rutile was suppressed and carbon layer was thin enough to transmit UV rays.     

Porous titania microspheres with uniform wall thickness and high photoactivity

Highly porous titania particles were prepared by depositing thin films of titania, using alternating reactions of TiCl₄ and hydrogen peroxide, on poly(styrene-divinylbenzene) (PS-DVB) template particles via atomic layer deposition (ALD) at 77 °C. The composition of the titania films was verified by XPS analysis and the titania films were directly observed by TEM. TGA/DSC was used to study the thermal decomposition of the polymer template. Porous titania particles with uniform wall thicknesses were successfully obtained after the template PS-DVB was removed by oxidation in air at 400 °C for 24 h. Verification of the resulting porous structure of the titania particles was done by cross-sectional SEM and nitrogen adsorption–desorption analysis. Porous titania particles were treated at different temperatures. XRD analysis was used to determine the microstructure and phase transformation of titania at elevated temperatures. The photocatalytic activity of these porous titania particles was studied by methylene blue decomposition under UV light at room temperature and was found to be comparable to that of commercial anatase titania nanoparticles (~20 nm). Depositing Na₂SO₄ on TiO₂ retarded the TiO₂ phase transformation from anatase to rutile during calcination and, thus, greatly increased the photoactivity of the porous titania particles.     

Simple fabrication of rod-like N-doped TiO2/Ag with enhanced visible-light photocatalytic activity

Rod-like N-doped TiO₂/Ag composites were successfully synthesized by a modified sol–gel method, without adding any surfactants. The entire preparation differs from the traditional sol–gel synthesis of TiO₂ that the reaction can get controlled by adjusting the flow speed of water vapor and NH₃. Characterization results show that as-prepared samples were uniform nanorods with an average length of ca. 3 µm and a cross section diameter of ca. 150 nm. The rod-like structure was formed during the annealing process. A possible mechanism was proposed to illustrate the formation of rod-like Ag–N–TiO₂. The degradation of methylene blue performed under visible light with the prepared nanorods as the photocatalyst demonstrated the photocatalytic activities of TiO₂ can be improved by the synergistic effect of N doping and Ag modification. In addition, as-prepared TiO₂-based photocatalyst exhibits a significantly enhanced photo-chemical stability after 5 catalytic cycles mainly due to the rod-like morphology. This indicated that they have some potential value in practical application.     

Effect of calcination temperature on the structural properties and photocatalytic activities of solvothermal synthesized TiO2 hollow nanoparticles

TiO₂ hollow nanoparticles were prepared by the solvothermal method, calcined at different temperatures and characterized by XRD, BET, SEM, PL and FT-IR. The effects of morphology, size and calcination temperature on the photocatalytic activity of the prepared materials were discussed in detail. It was found that the calcination temperature altered the crystallinity, morphology, surface area, and the porous structure. The photocatalytic activity of the TiO₂ powders evaluated through photocatalytic degradation of gaseous acetone under UV-light irradiation, showed TiO₂ calcined at 250 °C to exhibit a higher photocatalytic activity than commercial powders (Degussa P25).     

Enhanced adsorption of two azo dyes produced by carbon modification of TiO2

The process of removal of two azo dyes (Reactive Red 198 and Direct Green 99) from water was investigated. The adsorption of azo dyes onto surfaces of pristine TiO₂, P25 and carbon-modified TiO₂ (at 120 °C for 24 h) was presented. The Freundlich model of adsorption isotherm was found for pristine TiO₂ and TiO₂-P25. Modification of TiO₂ by carbon lead to the change from the Freundlich model to the Langmuir model of adsorption isotherm. For the TiO₂-C photocatalyst the adsorption capacity was determined, which was almost two times higher for Direct Green 99 than Reactive Red 198 dyes. As a result we observed the increase of photocatalytic activity of carbon-modified TiO₂ photocatalyst.     

An aqueous synthesis of photocatalyst by selective dissolution of titanium oxide/hydroxyapatite composite

A novel synthesis method of a highly active photocatalyst was proposed. Titanium dioxide (TiO₂) nano-particles were prepared by three-step procedure, precipitation of hydroxyapatite (HAp) on TiO₂ particles, heat treatment of the TiO₂/HAp composites, and acid treatment in hydrochloric acid. The unique point of this procedure is the selective dissolution of HAp to obtain exposed TiO₂ surfaces. The HAp precipitation was achieved by stirring TiO₂ powders in the mixtures of Ca(NO₃)₂ and NH₄H₂PO₄ aqueous solutions at pH 8.5. Then, the heat-treated TiO₂/HAp composites were treated with hydrochloric acid. The precipitated HAp avoided the direct contact of TiO₂ particles and suppressed the phase transformation from anatase-to-rutile >200 °C. The HAp also suppressed a decrease of specific surface area of TiO₂ during the heat treatment. The photocatalytic activities were evaluated from an absorbance decrease of methylene blue (MB) under ultraviolet (UV) irradiation. The MB photodecomposition was approximated to the first-order reaction and the reaction rate constants of the obtained TiO₂ powders heated at various temperatures were higher than those of conventional TiO₂ powders heated at same temperatures. The enhanced photocatalytic activity is attributed to the suppression effects for the phase transformation to rutile phase and the decreasing of specific surface area in the heat treatment.     

Preparation of TiO2 ultrafine nanopowder with large surface area and its photocatalytic activity for gaseous nitrogen oxides

TiO₂ nanopowder with a large surface area and high crystallinity was synthesized by a thermal decomposition process. The physicochemical properties of the prepared powders were examined by X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption isotherms. The nanocrystallites of the prepared powers were considerably smaller than those of the commercial photocatalyst (Degussa, P25), and the particles had a dense polyhedral structure. In addition, the particles had a mainly disordered mesoporous structure with a pore volume that varied according to the pore size in the range of 2-20 nm. The photocatalytic activity of the prepared photocatalyst was obviously higher than that of P25 on the photodegradation of gaseous nitrogen oxides under UV_{254 + 185 nm} lamp irradiation. Above 40% relative humidity, the NO_x removal efficiency of the prepared photocatalyst was 10% higher than that of P25. Furthermore, a suitable relative humidity and longer residence time were found to enhance the photocatalytic oxidation of gaseous nitrogen oxides by UV_{254 + 185 nm} lamp irradiation and TiO₂ nanoparticles.     

Hydrothermal synthesis of titanium dioxide using acidic peptizing agents and their photocatalytic activity

We have prepared TiO₂ nanoparticles by the hydrolysis of titanium tetraisopropoxide (TTIP) using HNO₃ as a peptizing agent in the hydrothermal method. The physical properties of nanosized TiO₂ have been investigated by TEM, XRD and FT-IR. The photocatalytic degradation of orange II has been studied by using a batch reactor in the presence of UV light. When the molar ratio of HNO₃/TTIP was 1.0, the rutile phase appeared on the titania and the photocatalytic activity decreased with an increase of HNO₃ concentration. The crystallite size of the anatase phase increased from 6.6 to 24.2 nm as the calcination temperature increased from 300 °C to 600 °C. The highest activity on the photocatalytic decomposition of orange II was obtained with titania particles dried at 105 °C without a calcination and the photocatalytic activity decreased with increasing the calcination temperature. In addition, the titania particles prepared at 180 °C showed the highest activity on the photocatalytic decomposition of orange II. This paper was prepared at the 2004 Korea/Japan/Taiwan Chemical Engineering Conference held at Busan, Korea between November 3 and 4, 2004.     

Onset coarsening-coalescence kinetics of ZrO2 and less refractory TiO2 nanoparticles: Effect of homologous temperature and phase transformation

Specific surface area change of ZrO₂ (predominant tetragonal - (t) symmetry, 30-50 nm) and less refractory TiO₂ anatase nanoparticles (20-50 nm) upon isothermal firing at 700-1000 °C in air was determined by N₂ adsorption-desorption hysteresis isotherm. The nanoparticles underwent onset coarsening-coalescence within minutes without appreciable phase transformation for TiO₂, but with extensive transformation into monoclinic (m-) symmetry for ZrO₂. The apparent activation energy of such a process being not much higher for ZrO₂ (77 ± 23 kJ/mol) than TiO₂ (56 ± 3 kJ/mol) nanoparticles can be attributed to transformation plasticity. The minimum temperature for coarsening/coalescence of the present ZrO₂ and TiO₂ nanoparticles was estimated as 710 and 641 °C, respectively.     

EIS analysis on low temperature fabrication of TiO2 porous films for dye-sensitized solar cells

A low temperature (<150 °C) fabrication method for preparation of TiO₂ porous films with high efficiency in dye-sensitized solar cells (DSSCs) has been developed. The Ti(IV) tetraisopropoxide (TTIP) was added to the paste of TiO₂ nanoparticles to interconnect the TiO₂ particles. The electrochemical impedance spectroscopy (EIS) technique was employed to quantify the charge transport resistance at the TiO₂/dye/electrolyte interface (R_ct2) and electron lifetime in the TiO₂ film (τ_e) under different molar ratios of TTIP/TiO₂ and also at various TiO₂ thicknesses. It was found that the R_ct2 decreased as the molar ratio increased from 0.02 to 0.08, however, it increased at a molar ratio of 0.2 due to the reduction in surface area for dye adsorption. In addition, the characteristic frequency peak shifted to lower frequency at a molar ratio of 0.08, indicating the longer electron lifetime. As for the thickness effect, TiO₂ film with a thickness around 17 μm achieved the best cell efficiency. EIS study also confirmed that, under illumination, the smallest R_ct2 was associated with a TiO₂ thickness of 17 μm, with the R_ct2 increased as the thickness of TiO₂ film increased. In the Bode plots, the characteristic frequency peaks shifted to higher frequency when the thickness of TiO₂ increased from 17.2 to 48.2 μm, indicating the electron recombination increases as the thickness of the TiO₂ electrode increases.Finally, to make better use of longer wavelength light, 30 wt% of larger TiO₂ particle (300 nm) was mixed with P25 TiO₂ as light scattering particles. It effectively increased the short-circuit current density and cell conversion efficiency from 7.44 to 8.80 mA cm⁻² and 3.75 to 4.20%, respectively.     

Preparation of submicron-sized porous titanium oxide particles by the swelling process

A method to prepare submicron-sized porous titanium oxide (TiO₂) particles is studied in this work. Polystyrene (PS) template particles were prepared by emulsifier-free emulsion polymerization. The polymer templates dispersed in the aqueous solution have been used for entrapping titanium(IV) isopropoxide (TTIP), by the swelling process in a suitable solvent mixture containing a swelling solvent (good solvent or poor solvent), a TiO₂ precursor (TTIP), and a chelating agent (AcAc), within the polymer templates, followed by hydrolysis/condensation reaction of TTIP confined in PS template particles by the addition of the chelating agent. The influence of various reaction parameters, such as mixtures of different weight ratios between the PS particles and desiccative TTIP, AcAc amounts, and the swelling solvent amounts and type, on the size, bulk, and composition of the particles was investigated. Porous TiO₂ particles have been prepared by thermal decomposition of the PS templates at 500 °C.     

Simple fabrication of N-doped mesoporous TiO2 nanorods with the enhanced visible light photocatalytic activity

N-doped mesoporous TiO₂ nanorods were fabricated by a modified and facile sol–gel approach without any templates. Ammonium nitrate was used as a raw source of N dopants, which could produce a lot of gasses such as N₂, NO₂, and H₂O in the process of heating samples. These gasses were proved to be vitally important to form the special mesoporous structure. The samples were characterized by the powder X-ray diffraction, X-ray photoelectron spectrometer, nitrogen adsorption isotherms, scanning electron microscopy, transmission electron microscopy, and UV-visible absorption spectra. The average length and the cross section diameter of the as-prepared samples were ca. 1.5 μm and ca. 80 nm, respectively. The photocatalytic activity was evaluated by photodegradation of methylene blue (MB) in aqueous solution. The N-doped mesoporous TiO₂ nanorods showed an excellent photocatalytic activity, which may be attributed to the enlarged surface area (106.4 m² g^-1) and the narrowed band gap (2.05 eV). Besides, the rod-like photocatalyst was found to be easy to recycle.     

Synthesis and photocatalytic behavior of BiVO4 with decahedral structure

Decahedral BiVO₄ was successfully synthesized with Tween-80 as a template by the microwave hydrothermal method. The effects of hydrothermal temperature and Tween-80 on crystal phase and morphology of the obtained BiVO₄ were investigated. The crystal phase and morphology were characterized by X-ray diffraction, field emission scanning electron microscopy and UV–vis diffuse reflectance spectroscopy. The results indicated that the as-prepared decahedral BiVO₄ was monoclinic. The photocatalytic behavior for methylene blue (MB) degradation was enhanced with the assistance of an appropriate amount of hydrogen peroxide (H₂O₂) under visible light irradiation. The photocatalytic tests indicated that the photocatalytic efficiency of decahedral BiVO₄ synthesized at 180 °C was 63.5%. However, BiVO₄ sample synthesized at 160 °C showed the highest photocatalytic degradation rate, up to 81.6%, due to its small size and crystal defects.     

Effects of heating rate on microstructures and microwave dielectric properties of (1 − x)ZnAl2O4–xTiO2 (x = 0.21) ceramics

(1 − x)ZnAl₂O₄–xTiO₂ (x = 0.21) ceramics were synthesized at 1500 °C for 3 h using the solid-state reaction at a heating rate from 1 to 7 °C/min. The effects of heating rate on the microstructure, phase composition and oxidation state of titanium in the ceramics were investigated. The XRD results show that this system is composed of two phases, i.e. ZnAl₂O₄ spinel and rutile. The “black core” phenomenon resulting from reduction of Ti⁴⁺ ion valence appears after the ceramics are sintered at the speed of 1 and 3 °C/min. As the heating rate increases, the density and quality factor (Q·f) increase initially and reach the maximum value when the heating rate is 5 °C/min, and then reduce quickly to the minimum, while the dielectric constant (?_r) and temperature coefficient of resonator frequency (τ_f) nearly do not change. The optimal microwave dielectric properties can be achieved in (1 − x)ZnAl₂O₄–xTiO₂ (x = 0.21) ceramics sintered at a heating rate of 5 °C/min with an ?_r value of 11.6, a Q·f value of 74,000 GHz (at about 6.5 GHz), and a τ_f value of −0.4 ppm/°C.     

Photoelectro-Fenton combined with photocatalytic process for degradation of an azo dye using supported TiO2 nanoparticles and carbon nanotube cathode: Neural network modeling

In this work, treatment of an azo dye solution containing C.I. Basic Red 46 (BR46) by photoelectro-Fenton (PEF) combined with photocatalytic process was studied. Carbon nanotube-polytetrafluoroethylene (CNT-PTFE) electrode was used as cathode. The investigated photocatalyst was TiO₂ nanoparticles (Degussa P25) having 80% anatase and 20% rutile, specific surface area (BET) 50 m²/g, and particle size 21 nm immobilized on glass plates. A comparison of electro-Fenton (EF), UV/TiO₂, PEF and PEF/TiO₂ processes for decolorization of BR46 solution was performed. Results showed that color removal follows the decreasing order: PEF/TiO₂ > PEF > EF > UV/TiO₂. The influence of the basic operational parameters such as initial pH of the solution, initial dye concentration, the size of anode, applied current, kind of ultraviolet (UV) light and initial Fe³⁺ concentration on the degradation efficiency of BR46 was studied. The mineralization of the dye was investigated by total organic carbon (TOC) measurements that showed 98.8% mineralization of 20 mg/l dye at 6 h using PEF/TiO₂ process. An artificial neural network (ANN) model was developed to predict the decolorization of BR46 solution. The findings indicated that artificial neural network provided reasonable predictive performance (R² = 0.986).     

Visible light photocatalytic degradation of thiophene using Ag–TiO2/multi-walled carbon nanotubes nanocomposite

Ag–TiO₂ nanocatalyst, supported on multi-walled carbon nanotubes, was synthesized successfully via a modified sol–gel method, and the prepared photocatalyst was used to remediate aqueous thiophene environmentally by photocatalytic oxidation under visible light. The prepared Ag–TiO₂/multi-walled carbon nanotubes nanocomposite photocatalyst was characterized through X-ray diffraction, Brunauer–Emmett–Teller (BET), transmission electron microscopy, and UV–vis spectra (UV–vis). The results showed that both Ag and TiO₂ nanoparticles were well-dispersed over the MWCNTs and formed a uniform nanocomposite. Ag doping can eliminate the recombination of electron–hole pairs in the catalyst, and the presence of MWCNTs in the TiO₂ composite can change surface properties to achieve sensitivity to visible light. The optimum mass ratio of MWCNT:TiO₂:Ag was 0.02:1.0:0.05, which resulted in the photocatalyst's experimental performance in oxidizing about 100% of the thiophene in a 600 mg/L solution within 30 min and with 1.4 g L⁻¹ amount of catalyst used.     

One-pot solvothermal synthesis of carbon dots/Ag nanoparticles/TiO2 nanocomposites with enhanced photocatalytic performance

In this paper, we reported a “green” and facile method for one-pot solvothermal synthesis of carbon dots (CDs)/Ag nanoparticles (AgNPs)/titanium dioxide (TiO₂, commercial Degussa P25) ternary nanocomposites with enhanced photocatalytic performance. The characterizations of this ternary photocatalyst were studied at length and our results revealed that the crystalline phase of TiO₂ component remained unchanged after the reaction. While the newborn AgNPs and CDs were tightly attached onto the surface of TiO₂ nanoparticles. The photocatalytic activities of photocatalysts were tested by measurements of photo-degradation on methylene blue (MB) under ultraviolet (UV) and visible light. It was showed that the photocatalytic performance of the ternary photocatalyst was superior to that of single TiO₂ or CDs/TiO₂ binary photocatalyst. It was probably attributed to the synergistic effect of the photoelectrical properties of CDs and the surface plasmon resonance (SPR) effect of AgNPs, which could both enhance the absorption of visible light and hinder the recombination of photogenerated electron-hole pairs.