共查询到20条相似文献,搜索用时 59 毫秒
1.
在企业建标复查及新建标考核中,建标技术报告文件常常会涉及不确定度的评定与验证。在JJF1033-1992《计量标准考核规范》中,不确定度评定提法为标准装置的总不确定度分析与评定,而今在JJF1033-2001《计量标准考核规范》及JJF1069-2000《法定计量检定机构考核规范》中其提法是被检对象示值误差的扩展不确定度分析与评定。下面结合学习JJF1059-1999《测量不确定度评定与表示》,对我所量程为10MPa,准确度为0.4级的精密压力表做一个扩展不确定度分析,以供同行参考。一、依据及测量方法1.检定依据:JJG49-1999《弹簧管式精密压力表及真空表… 相似文献
2.
JJF1033-2008<计量标准考核规范>中明确规定,在<计量标准技术报告>中要对测量不确定度进行分析评定.按JJF1069-2007<法定计量检定机构考核规范>之7.3.6的要求:"机构应制定评价其校准测量能力的程序.评价应适应机构所开展项目的参数和量程."也就是说,机构应对其所开展项目的所有参数和量程都要进行校准测量能力的计算.鉴于计量标准考核中的测量不确定度评定同校准测量能力的评定容易产生混淆,本文在对它们的定义进行分析之后,通过实例分别讲述它们各自的评定方法及评定过程中需注意的方面. 相似文献
3.
4.
为了修订JJG 63-1994<刀口形直尺>国家计量检定规程,根据JJF 1059-1999<测量不确定度评定与表示>国家计量技术规范给出的测量不确定度评估原则,运用JJF 1130-2005<几何量测量设备校准中的不确定度评定指南>国家计量技术规范给出的测量不确定度近似评估思想、不确定度概算技术和不确定度报告编写格式,对刀口尺工作棱边直线度的测量过程(测量条件、测量原理、测量方法、测量程序等)进行测量不确定度评估,通过评估发现JJG 63-1994国家检定规程的问题,找出解决办法,从理论上指导了对JJG 63-1994<刀口形直尺>国家计量检定规程的修订. 相似文献
5.
6.
本文根据国家计量技术规范JJF1059-1999<测量不确定度评定与表示>、国家计量检定规程JJG 59-2007<活塞式压力计>并结合实际工作经验,对0.05级活塞式压力计活塞有效面积测量结果不确定度进行评定. 相似文献
7.
本文根据国家计量技术规范JJF1059-1999<测量不确定度评定与表示>、国家计量检定规程JJG911-1996<钢丝测力仪>并结合工作中的实际经验,对钢丝测力仪示值误差测量结果不确定度进行评定. 相似文献
8.
本文结合实际检定工作,参照国家计量技术规范JJF1059-1999<测量不确定度的评定与表示>,依据JJG98-2006<机械天平>检定规程,对机械天平示值误差测量结果的不确定度进行了评定. 相似文献
9.
10.
电子秤示值误差不确定度分析 总被引:1,自引:0,他引:1
根据企业计量标准允差以不确定度进行表示的要求,经过对计量标准考核规范(JJF 1033-2001)和测量不确定度评定与表示(JJF 1059-1999)的学习研究,对目前所建立的电子秤(衡器)进行不确定度评定和分析,通过对电子秤测量重复性、四角偏载误差以及示值随电源电压变化等几个方面进行分析,来评定其不确定度. 相似文献
11.
12.
14.
15.
现如今,我国经济实力得到快速发展,综合国力得到了快速的提高。各项领域都取得了一定的成就。经济在一定程度上也取得了不错的发展。我国在各项领域中,激光领域的发展获得了突出的地位。从我国成立至今到现在,人们对于技术的追求越来越渴望,随着人们生活水平的提高,人们对于生活质量的追求也越来越高标准。所以说我们要想取得更加长远的进步,就要从科技上入手。我国激光位移测量系统在长度计量技术在最近几年获得兴起,并且在逐渐获得完善,本文主要对其中激光位移测量系统进行技术应用的研究。 相似文献
16.
李艳 《现代测量与实验室管理》2011,19(2):24-25
根据数字存储示波器校准规范和测量不确定度评定与表示规范,用9500B示波器校准仪对数字示波器幅度测量相对误差测量的测量方法进行分析,并对测量不确定度进行了评定和分析。 相似文献
17.
《IEEE transactions on instrumentation and measurement》1964,13(4):197-209
The development of the current comparator, a three-winding current ratio transformer, is reviewed and its characteristics as an alternating current ratio standard are analyzed. Particular attention is given to the use of magnetic shielding and its effect on the accuracy and usefulness of the device. Some error characteristics of three types of audio-frequency current comparators are given and possible applications discussed. These include the calibration of current transformers and impedance comparisons. The adaptation of this device to dc operation is made possible by modulation techniques. A 20 000-ampere self-balancing direct current comparator, designed specifically for the calibration in situ of transductors or direct current transformers, is described. The application of this comparator to the calibration of shunts at high currents also is discussed and some results presented. 相似文献
18.
19.
Current technological breakthroughs in the areas of digital computers and electronics and the increase in the use of automated work systems mean increased mental demands and fatigue for a large segment of the workforce. In order to determine relationships between worker mental output (performance) and the resulting fatigue, a five hour laboratory experiment was conducted. The experiment was run under two types of working conditions (Rest/ No Rest). The performance measures of interest were work output, heart rate and brain wave activity. The results supported the notion of performance deterioration due to mental fatigue. In addition, the results showed a significant difference between output for rest versus no rest task conditions. 相似文献
20.
Relations for calculating the stresses in objects from the results of measurements in them of the strains for complex forms
of loading are presented.
__________
Translated from Izmeritel'naya Tekhnika, No. 9, pp. 56–59, September, 2005. 相似文献