Preparation, Characterization of CuO／CeO2 and Cu／CeO2 Catalysts and Their Applications in Low-Temperature CO Oxidation

CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.     

Valence State of Active Copper in CuOx/CeO2 Catalysts for CO Oxidation

CuOx/CeO2 catalysts were prepared by adsorption-impregnation method, CO conversion was tested over the catalysts pretreated under different conditions for preferential CO oxidation in H2, and the catalysts were characterized with X-ray photoelectron spectroscopy and temperature programmed reduction. Experimental results show that there are two kinds of copper, which are Cu^＋ and Cu^2＋ in calcined CuOx/CeO2, Among them, the Cu^＋ is the key active component for CO oxidation. The main reason is as follows： CO is activated by copper for CO oxidation over CuOx/CeO2, while CO can not be activated by Cu^2＋. Only when Cu^2＋ is reduced to Cu ^＋ or Cu^0, the copper may be active for CO oxidation, moreover, the experimental results show that the reduction of Cu^2＋ does not lead to an increase of catalytic activity. So the active species is Cu^＋ in CuOx/CeO2 catalysts.     

CuO／CeO2 Catalysts for Selective Oxidation of Carbon Monoxide in Excess Hydrogen

CuO/CeO2 catalysts were prepared by a coprecipitation method and tested for CO removal from reformed fuels via selective oxidation. The influence of the calcination temperature on the chemical compositions and catalytic performance of CuO/CeO2 catalysts were studied. It was found that CuO/CeO2 catalysts exhibit excellent CO oxidation activity and selectivity, and the complete removal of CO is attained when the catalysts are calcined at appropriate temperatures. XRD, TPR and XPS results indicate that CuO/CeO2 catalysts exhibit higher catalytic performance in CO selective oxidation due to the strong interaction between copper oxide and cerium dioxide, which promotes the dispersion and hydrogen reduction activity of copper.     

Catalytic Oxidative Properties and Characterization of CuO／CeO2 Catalysts

ＣｅＯ2 ｏｒｍａｔｅｒｉａｌｓｃｏｎｔａｉｎｉｎｇＣｅＯ2 ｐｏｓｓｅｓｓｕｎｉｑｕｅｒｅｄｏｘｐｒｏｐｅｒｔｉｅｓｉｎｃａｔａｌｙｔｉｃｐｒｏｃｅｓｓｅｓ[1～ 3] ,ａｎｄｃａｎｉｍｐｒｏｖｅｄｉｓｐｅｒｓｉｏｎｏｆａｃｔｉｖｅｃｏｍｐｏｎｅｎｔｓｏｎｔｈｅｓｕｐ ｐｏｒｔｓａｎｄｔｈｕｓｅｎｈａｎｃｅｔｈｅｉｒｔｈｅｒｍａｌｓｔａｂｉｌｉｔｙａｎｄｃａｔａｌｙｔｉｃａｃｔｉｖｉｔｙ .ＭｏｓｔｓｔｕｄｉｅｓｈａｖｅｕｓｅｄＣｅＯ2 ａｓａｎａｄｄｉｔｉｖｅ[4 ] ａｎｄｅｘａｍｉｎｅｄｉｔｓｉｎｔｅｒａ…     

Preferential Oxidation of Carbon Monoxide in Excess Hydrogen over Au/Co3O4-CeO2 Catalysts

Fuel cells are considered to be the propulsionsystem of the near future,since they can produceelectricity without pollutingthe environment,and pos-sess the necessary specific power,power density anddurability to replace conventional internal combustioneng…     

Characterization and CO Catalytic Oxidation of CuO／Ce-Zr-La-O Catalyst

The Ce-Zr-La-O solid solution was prepared by the sol - gel method. The structure and the redox behavior of Ce-Zr-La-O solid solution and CuO/Ce-Zr-La-O catalysts were investigated by using XRD, Raman and TPR techniques. The result shows that the reduction capability of Ce0.7Zr0.3-y LayO solid solution is related to content of La. Appropriate content of La can enhance the redox capability of the solid solution. The oxidation activity of the CuO (6%)/Ce0.7Zr0.15La0. 15O catalyst is the highest. CuO, which finely dispersed and interacted with the support, is the site of oxidation activity.     

CeO2-Co3O4 Catalysts for CO Oxidation

CeO2-Co3O4 catalysts for low-temperature CO oxidation were prepared by a co-precipitation method. In combination with the characterization methods of N2 adsorption/desorption, XRD, temperature-programmed reduction （TPR）, and FT-IR, the influence of the cerium content on the catalytic performance of CeO2-Co3O4 was investigated. The results indicate that the prepared CeO2-Co3O4 catalysts exhibit a better activity than that of pure CeO2 or pure Co3O4. The catalyst with the Ce/Co atomic ratio 1 ： 16 exhibits the best activity, which converts 77% of CO at room temperature and completely oxidizes CO at 45 ℃.     

Influence of Additives Ceria and Lanthana on Performance of Pd／Al／Monolith Honeycomb Catalysts

The effects of ceria and lanthana additives on activity and thermal stabilization of the catalysts for CO oxidation were studied. The results show that the addition of CeO2 clearly improves the catalytic activity, which may derive from the synergic effect between CeO2 and PdO. The catalysts were characterized by means of temperature-programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) measurements. The XPS results of a slight increase in metal oxidation state reflect that the charge transfers from metal to ceria and ceria is slightly reduced, which leads to a decrease of the Ce-O bond strength. Pd-Ce synergism affects the reduction behavior of the catalysts. The TPR results show that the CeO2 ad-dition lowers the reduction temperature of PdO, while palladium facilitates the reduction of the ceria. For PdO/La2O3/Al2O3/monolith honeycomb catalysts, the aging test measurements at 1050 ℃ and the XRD results show that the formation of LaAlO3 which neutralizes the surface alumina defects inhibits the sintering of alumina.     

Recent Developments in Doping and Structural Modification of Ceria-Based Catalysts

Itiswellknownthatautomotiveexhaustisoneofthemajorsourcesofairpollution .Oneofthewaytosolvethisproblemsistheuseofthetree waycatalysts(TWCs) ,whichareabletoneutralizeCO ,CHandNOxsimultaneously .ThemosteffectiveTWCsarethesystemsincludingCeO2[1,2 ] sinceithas…     

CO oxidation over CuO catalysts supported on CeO2-ZrO2 prepared by microwave-assisted co-precipitation： The influence of CuO content

CeO2-ZrO2 mixed oxide(Ce0.6Zr0.4O2) prepared by microwave-assisted heating co-precipitation was used as a support to prepare a series of CuO/Ce0.6Zr0.4O2 catalysts with various CuO contents(0 wt.%–15 wt.%) via the method of incipient-wetness impregnation.The obtained CuO/Ce0.6Zr0.4O2 samples were characterized by N2 adsorption,XRD,Raman,TEM and H2-TPR technologies,and their catalytic activities for CO oxidation were investigated.The results showed that the activity of CuO/Ce0.6Zr0.4O2 catalyst was strongly influenced by the content of CuO,and the catalyst with 10 wt.% CuO exhibited the best catalytic activity in CO oxidation,which could be attributed to the high dispersion and reducibility of CuO,and high oxygen vacancy concentration in the catalyst.     

Effect of La_2O_3on Methanation of CO and CO_2over Ni-Mo/γ-Al_2O_3Catalyst

In the early 1980s, it was reported thatrare earth oxide can improve the properties ofnickel catalysts['J. In this paper, the effect ofLaZO3 on activity of methanation of CO andCOb over Ni-Mo/Y-A12O3 was studied. The relationship between catalytic activity, surfacebehaviour and the role of LaZO3 in Mi-Mo-La/Y-Allot catalyst were investigated by means oftransmission electron microscope (TEM ), Xray photoelectron spectroscopy (XPS ), andchemisorption of CO.1 Experimental1. I Prepara…     

Catalytic Behavior of CO Oxidization over Pd/ZrO2 - CeO2 Catalyst

The effects of Pd loading, cerium content, the special surface area of the support and calcination temperature on the catalytic properties of Pd-loaded zirconia-ceria mixed oxide were studied.The results show that loading Pd and increasing cerium content in the mixed oxides can enhance the catalytic activity.There is a little effect of calcination temperature on catalytic activities, implying that these catalysts are effective with good thermal stability.     

A new cathode using CeO2/MWNT for hydrogen peroxide synthesis through a fuel cell

Catalyst using CeO2/MWNT (multi-walled carbon nanotube) was prepared by chemical deposition method and was applied to prepare the cathode of fuel cell for hydrogen peroxide synthesis. Effect of catalyst loading, flow rate of aqueous solution, and KOH concentration on hydrogen peroxide synthesis were investigated. Experimental results indicated that hydrogen peroxide concentration approached 275 mmol/L given 25% of CeO2/MWNT, 18 ml/h of aqueous solution, and 5 mol/L of KOH concentration. Moreover, the reaction mechanism was further discussed. The results indicated that MWNT and cerium oxide were the synergism to produce hydrogen peroxide. Increase of KOH concentration not only reduced the apparent cell resistance but also increased the open-circuit voltage.