Monthly optimum inclination of glass cover and external reflector of a basin type solar still with internal and external reflector

In this report, we present a theoretical analysis of a basin type solar still with internal and external reflectors. The external reflector is a flat plate that extends from the back wall of the still, and can presumably be inclined forwards or backwards according to the month. We have theoretically predicted the daily amount of distillate produced by the still throughout the year, which varies according to the inclination angle of both the glass cover and the external reflector, at 30°N latitude. We found the optimum external reflector inclination for each month for a still with a glass cover inclination of 10-50°. The increase in the average daily amount of distillate throughout the year of a still with inclined external reflector with optimum inclination in addition to an internal reflector, compared to a conventional basin type still was predicted to be 29%, 43% or 67% when the glass cover inclination is 10°, 30° or 50° and the length of external reflector is half the still’s length.     

Liquid collector efficiency in solar stills

The paper deals with the results of preliminary studies on the effect of surface area on the performance of a solar still. Results on the effects of floating coal, compartmentalization and stirring of raw water are reported with respect to a reference still in terms of percentage increase in distillate output. The results show an increase in distillate output in all these cases especially at low water depths and in the presence of solar radiation. The stirring of raw water gave interesting results during daytime which have been explained on the basis of increased aquation of air within the system.     

Solar distillation of pond (muddy) water

Solar distillation tests were performed with samples of muddy water in a deep basin type solar still. Results presented show that, on a 24 h basis, the distillate output is independent of the muddiness of the water sample. However, during the daytime, periods between sunrise and sunset, the output increases with the muddiness of the water.     

Increase in distillate productivity by inclining the flat plate external reflector of a tilted-wick solar still in winter

This paper presents a theoretical analysis of a tilted-wick solar still with an inclined flat plate external reflector on a winter solstice day at 30°N latitude. The daily amount of distillate of a still with an inclined reflector would be about 15% or 27% greater than that with a vertical reflector when the reflector’s length is a half of or the same as the still’s length.     

Transient analysis of solar still

This paper presents an analysis of the transient performance of a basin type mounted still; explicit expressions for hourly variation of temperature of glass cover and water in the basin and distillate output have been obtained. The results of the analysis are in good agreement with experiments.     

Periodic theory of a greenhouse

This work presents a simple mathematical model of a greenhouse system whose top surface is covered by a solar still. The effect of various parameters such as relative humidity, ventilation/infiltration, heat capacity of basin water and plants, thickness of roof and water distillate output on the performance of the greenhouse system has been studied. It is found that the proposed system provides fresh water to cater to the needs of plants inside the greenhouse.     

Solar distillation of olive mill wastewater

A solar still was employed for the dewatering of olive mill wastewater over a series of consecutive days. The collected distillate and the remaining pulp were analyzed to test the method for treating agro-food industry wastewater. The efficiency of solar distillation of olive mill wastewaters was examined. Due to reduced energy consumption and relatively high temperatures achieved in the still, solar distillation could be applied in any process where separation of liquid and solid phase is required. A quantity of olive mill wastewater was left inside the solar still for 9 days, under outdoor conditions. Critical quality parameters (e.g. chemical oxygen demand, pH, total and volatile solids, total Kjeldahl nitrogen) were determined by daily sampling of both the distillate and the basin liquid. In addition, solar radiation and liquid, glass and ambient temperatures were recorded. It was shown that the distillate produced was free from solids, 80% lower in terms of COD and 90% in terms of TKN, while the basin residual was in solid form with only 15% water concentration and without any odor emissions.     

Double basin solar still

This paper presents a periodic analysis and observed performance of a double basin solar still, mounted on a stand. Observations on this type of still are in fair agreement with the results of analysis. The daily distillate production of such a still is on the average 36% higher than that of a single basin still. Some aspects of the operation, design and performance have also been discussed.     

Effect of inclination of external flat plate reflector of basin type still in winter

This paper presents a theoretical analysis of a basin type solar still with an internal reflector (two sides and back walls) and an inclined flat plate external reflector on a winter solstice day at 30° N latitude. We are proposing a new geometrical method for calculating the solar radiation reflected by the inclined external reflector and then absorbed on the basin liner. Using this method, we performed a numerical analysis of heat and mass transfer in the still in order to determine the effectiveness of the inclination of the external reflector. We found that the benefit of a vertical external reflector would be smaller or even negligible for a still with a larger value for the glass cover angle, while an inclined external reflector can increase the distillate productivity of the still at any glass cover angle, and the external reflector angle should be set at about 15° from vertical on a winter solstice day. The daily amount of distillate of the still with the inclined external reflector would be about 16% greater than that with the vertical external reflector, and about 2.3 times as large as that of the still with neither the internal nor the external reflector on a winter solstice day.     

Performance of solar still with a concave wick evaporation surface

Surfaces used for evaporation and condensation phenomenon play important roles in the performance of basin type solar still. In the present study, a concave wick surface was used for evaporation, whereas four sides of a pyramid shaped still were used for condensation. Use of jute wick increased the amount of absorbed solar radiation and enhanced the evaporation surface area. A concave shaped wick surface increases the evaporation area due to the capillary effect. Results show that average distillate productivity in day time was 4.1 l/m² and a maximum instantaneous system efficiency of 45% and average daily efficiency of 30% were recorded. The maximum hourly yield was 0.5 l/h. m² after solar noon. An estimated cost of 1 l of distillate was 0.065 $ for the presented solar still.     

Modeling solar still production using local weather data and artificial neural networks

A study has been performed to predict solar still distillate production from single examples of two different commercial solar stills that were operated for a year and a half. The purpose of this study was to determine the effectiveness of modeling solar still distillate production using artificial neural networks (ANNs) and local weather data. The study used the principal weather variables affecting solar still performance, which are the daily total insolation, daily average wind velocity, daily average cloud cover, daily average wind direction and daily average ambient temperature. The objectives of the study were to assess the sensitivity of the ANN predictions to different combinations of input parameters as well as to determine the minimum amount of inputs necessary to accurately model solar still performance. It was found that 31-78% of ANN model predictions were within 10% of the actual yield depending on the input variables that were selected. By using the coefficient of determination, it was found that 93-97% of the variance was accounted for by the ANN model. About one half to two thirds of the available long term input data were needed to have at least 60% of the model predictions fall within 10% of the actual yield. Satisfactory results for two different solar stills suggest that, with sufficient input data, the ANN method could be extended to predict the performance of other solar still designs in different climate regimes.     

PARAMETRIC STUDIES ON A DOUBLE BASIN SOLAR STILL

Parametric studies on a double basin solar still is presented. Explicit expressions are obtained for the temperatures of various components of the system, distillate output and the efficiency. Effects of the still parameters are also incorporated in the analysis. For appreciation of the analytical results, numerical calculations have been carried out using meteorological parameters of a typical day in Delhi. The parametric investigations reveal some worthinteresting results.     

Development of a tube-type solar still equipped with heat accumulation for irrigation

A tube-type solar still is found to be suitable for use in desert irrigation. The effectiveness of a heat accumulator with regard to distillate productivity is experimentally and numerically verified. The heat accumulator consists of tube bundles immersed in wax in order to utilize the latent heat of wax. The dynamic response to stepwise variation of irradiative intensity verified the contribution of wax to an increase of productivity only when the phase change of wax occurred. The effective distillate productivity was found to be 294.3 g/m² during the cyclic stepwise change of irradiative intensity, from 200 to 600 W/m² and back. Velocity vectors driven by natural convection and temperature contours estimated by numerical simulation verified the effectiveness of the heat accumulator especially after peak solar intensity. The latent heat of wax effectively contributed to a 15% increase in total distillate productivity per day. The still can feasibly meet irrigation water supply demands above an irrigative threshold of 17 MJ/m² d.     

Transient analysis of double basin solar still

The effect of water flowing over the upper glass cover of a double basin solar still on its transient performance has been presented. A comparative study of the daily distillate production of a double basin solar still with and without water flowing over the upper glass cover has been made, and some interesting conclusions have been drawn. Numerical calculations have been made for a typical hot day (viz 2 May 1980) in Delhi.     

Performance assessment of a solar still using blackened surface and thermocol insulation

Fluoride contaminated drinking water is a severe problem in many parts of the world because of fluoride-related health hazards, which are considered to be a major environmental problem today. The present work is aimed at utilizing solar energy for removal of fluoride from drinking water by using a “solar still”. Also tests have been conducted with the “solar still” to find out hourly output rate and “still efficiencies” with various test matrixes. It is observed that the distillate from “solar still” showed a fluoride reduction of 92–96%. Further, the efficiency of “solar still” got increased by 11% when capacity of water in the solar basin was raised from 10 to 20 L. Upon suitable modification of the solar basin with appropriate base liner and insulation, this efficiency of the “solar still” is found to be further increased by 6% with a 20 L basin capacity.     

Performance analysis of double basin solar still with evacuated tubes

Solar still is a very simple device, which is used for solar distillation process. In this research work, double basin solar still is made from locally available materials. Double basin solar still is made in such a way that, outer basin is exposed to sun and lower side of inner basin is directly connected with evacuated tubes to increase distillate output and reducing heat losses of a solar still. The overall size of the lower basin is about 1006 × 325 × 380 mm, the outer basin is about 1006 × 536 × 100 mm Black granite gravel is used to increase distillate output by reducing quantity of brackish or saline water in the both basins. Several experiments have conducted to determine the performance of a solar still in climate conditions of Mehsana (latitude of 23°59′ and longitude of 72°38′), Gujarat, like a double basin solar still alone, double basin solar still with different size black granite gravel, double basin solar still with evacuated tubes and double basin solar still with evacuated tubes and different size black granite gravel. Experimental results show that, connecting evacuated tubes with the lower side of the inner basin increases daily distillate output of 56% and is increased by 60, 63 and 67% with average 10, 20 and 30 mm size black granite gravel. Economic analysis of present double basin solar still is 195 days.     

Enhancement of distillate output of double basin solar still with vacuum tubes

The latent heat of condensation is lost to the atmosphere; hence it is not utilized to increase distillate output of single basin solar stills. This difficulty was overcome by attaching an additional basin to the main basin. The performance of the double basin solar still was also increased by attaching vacuum tubes to the lower basin; hence the lower basin possessed a higher temperature throughout the day. The latent heat of condensation of the bottom basin was also utilized to increase distillate. But the distillate output of the top basin was even lower compared with that of the bottom basin. This paper proposed a novel approach to increase the distillate output of the double basin solar still attached with vacuum tubes by introducing different sensible energy storage materials like pebbles, black granite gravel and calcium stones to increase the basin area. Experiments were conducted in climate conditions of Mehsana (23.6000° N, 72.4000° E) Gujarat from April to September 2013 with a constant water depth of 2 cm in the top basin with and without the use of basin materials. The results showed that the distillate output of basin material with calcium stones is greater (74%) compared with that of black granite gravel and pebbles. The integration of vacuum tubes with solar still greatly increases the distillate output of the solar still by providing hot water at the lower basin.     

Cost analysis of different solar still configurations

The enhancement of the productivity of the solar desalination system, in a certain location, could be attained by a proper modification in the system design. Therefore, different design configurations could be found in literatures. However, the increase in the system productivity with high system cost may increase also the average annual cost of the distillate. Cost analysis of different design configurations of solar desalination units is essential to evaluate the benefit of modification from the economical point of view. The main objective of this work is to estimate the water production cost for different types of solar stills. In this paper 17 design configurations are considered. Systems with higher and lower values of productivity are considered in this investigation. A simplified model for cost analysis is applied in this study. The results show that, the best average and maximum daily productivity are obtained from solar stills of single-slope and pyramid-shaped. The higher average annual productivity for a solar still is about 1533 l/m² using pyramid-shaped while the lower average annual productivity is about of 250 l/m² using modified solar stills with sun tracking. The lowest cost of distilled water obtained from the pyramid-shaped solar still is estimated as 0.0135 $/l while highest cost from the modified solar stills with sun tracking is estimated as 0.23 $/l.     

Analysis of solar desalination system using heat pump

This paper investigates a pilot desalination system which consists of a direct expansion solar assisted heat pump (DXSAHP) coupled to a single-effect evaporator unit. The working fluid used is R134a and distillate is obtained via falling film evaporation and flashing in the unit. Experiments have been conducted in both day and night meteorological conditions in Singapore and the effects of solar irradiation and compressor speed have been studied against the system performance. From the experiments, the Performance Ratio (PR) obtained ranges from 0.43 to 0.88, the average Coefficient of Performance (COP) was 8 and the highest distillate production recorded was 1.38 kg/h.     

Nocturnal distillation in basin-type solar stills

Nocturnal distillation, which dominates the output of deep basin stills, has been studied experimentally. From observations of continuous temperature and distillate measurements, the important factors affecting night-time distillation are identified. A dimensionless analysis of these factors was carried out in an attempt to generalise the night-time behaviour of solar stills. The results indicate that the distillate output is uniquely determined by the stored thermal energy in the still at sunset.