Evaluation of the performance of calix[8]arene derivatives as liquid phase extraction material for the removal of azo dyes

This paper presents a study on the removal of azo dyes (Reactive Black 5, Trapaeolin 000, Methyl Orange and Direct Violet 51) with calix[n]arene derivatives from aqueous solution into the organic phase in order to explore the potential use of calixarenes as low-cost efficient extractants for wastewater dye removal. The carboxylic acid derivative of calix[8]arene shows highest affinity towards the azo dyes. The influence of NaCl (present in the solution) on extraction process was also studied. The extent of the dye removal increased with the addition of NaCl. The proposed extraction mechanism involves several kinds of interactions: electrostatic repulsion between carboxylic acid groups of calix[8]arenes and sulfonate groups of azo dyes, hydrogen bonding and formation of an inclusion complex due to three dimensional cavity type calix[n]arene molecules through host-guest interactions.     

Preparation and application of calix[4]arene-grafted magnetite nanoparticles for removal of dichromate anions

Magnetic Fe₃O₄ nanoparticles were prepared by the chemical co-precipitation of Fe(III) and Fe(II) ions. Then, the nanoparticles were modified directly by 3-aminopropyltrimethoxy silane (APTMS) to introduce reactive groups onto the particles' surface, and diester derivative of calix[4]arene was immobilized onto the surface of modified-Fe₃O₄ nanoparticles by aminolysis reaction. The prepared magnetite nanoparticles (Calix-GM) were characterized by a combination of IR, TGA and TEM analyses. The extraction properties of the new material toward dichromate anions were also studied. It was observed that the prepared magnetite nanoparticles were an effective extractant for the removal of dichromate anions at pH 2.5–4.5.     

Transition metal cations extraction by ester and ketone derivatives of chromogenic azocalix[4]arenes

The molecule of azocalix[n]arene is a macrocyclic used effectively in the complexation of the heavy metal pollutants (like silver and mercury). In this work, our main aim is to prepare new chromogenic azocalix[n]arene molecules to elaborate an extractant with high extractant selectivity for metal ions able to detect this type of pollutant. The solvent extraction properties of four acetyls, four methyl ketones and four benzoyls derivatives from azocalix[4]arenes which were prepared by linking 4-ethyl, 4-n-butyl, 4-acetamid anilin and 2-aminothiazol to calix[4]arene through a diazo-coupling reaction, the alkaline earth (Sr2+) and the transition (Ag+, Hg2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Cr3+) metal cations have been determined by extraction studies with metal picrates. Both ketones are better extractants than esters, and show a strong preference for Ag+, while Cu2+ and Cr3+ are the most extracted cation with the esters. Both acetyl and benzoyl esters are good carriers for Ag+ and Hg2+.     

Interaction between calix[4]arene derivative bearing adenino units and complementary nucleosides at the air–water interface

The monolayers of the amphiphilic calix[4]arene derivatives at the lower rim with two adenino units on the surface of pure water, the aqueous subphases containing complementary nucleosides were studied by film balance measurement and relaxation experiments. LB films deposited from all subphases were investigated by UV spectra and FT-IR spectra. All the results indicate that the interaction between the adenino units in the headgroup of amphiphilic calix[4]arene derivatives and the complementary nucleosides in the subphase takes place through multiple complementary hydrogen bonding and the nucleosides in the subphases can be transferred to solid substrates along with their monolayers.     

Comparative studies on the solvent extraction of transition metal cations by calixarene, phenol and ester derivatives

The ionophore solvent extraction of various alkali metal and transition metal cations from the aqueous phase to the organic phase was carried out by using diazo-coupling calix[n]arenes [p-(4-phenylazophenylazo)calix[4]arene (L1) and p-phenylazocalix[6]arene (L2)], phenol derivatives [2,6-dimethyl-3-phenylazophenol (L3), 2-(5-bromo-2-pyridylazo)-5-diethylamino phenol (L4), 2-chloro-4-nitro(phenylazo)-5-sec-butyl-2-phenol (L5) and 2-chloro-4-nitro(phenylazo)-5-tert-butyl-2-phenol (L6)], and ester derivatives [quinoline-8-benzoate (L7), phenyl-1,4-dibenzoate (L8), p-tolyltiobenzoate (L9)]. It was found that, all the compounds (L1-L9) examined showed selectivity for transition metal cations such as Ag+, Hg+ Hg2+, and poor efficiency for alkali metal cations (Na+ and K+). The best extraction efficiency was obtained with L1 and L4.     

Self-assembled monolayer of a redox-active calix[4]arene: voltammetric recognition of the Ba2+ ion in aqueous media

The Redox-active monolayer of a novel calix[4]arene recognizing redox-inactive ionic species by voltammetry is reported. Calix[4]arene-disulfide-diquinone, which is not only redox-active but is also a highly selective ionophore for the Ba2+ ion, spontaneously forms a stable and dense monolayer film on gold. The redox-active calixarene monolayer selectively recognizes Ba2+ ion in aqueous media, and the voltammetric signals are proportional to the ionic concentration. A new voltammetric peak can be detected by square-wave voltammetry upon adding a dilute solution containing Ba2+ ion having a concentration as low as 1.0 x 10(-6) M. The Langmuir plot (1/ip vs 1/[Ba2+]) shows a linear slope in the range from 1.0 x 10(-6) M to 1.0 x 10(-4) M. This modified electrode does not show any significant interference from alkali and alkaline earth metal ions except for Sr2+ and Ca2+. Only 100- and 500-fold concentrations of Sr2+ and Ca2+ ions, respectively, can lead to voltammetric responses comparable to that of Ba2+.     

Complexation of higher fullerenes by calix[5]arene-based host molecules

The binding abilities of calix[5]arene-based host molecules for higher fullerenes (C76, C78, and C84) were investigated in organic solvents. The binding abilities of double-calix[5]arenes to higher fullerenes are high. In particular, their association constants to C76 and C78 in toluene reached at the order of 10(5) M(-1). In contrast, the binding abilities of simple calix[5]arenes decreased as increasing the size of the fullerenes. Accordingly, linking two calix[5]arenes with the covalent bonds creates the large cavities, complementary to higher fullerenes. The structure of the host-guest complex of double-calix[5]arene and C76 was discussed. The carbons of the polar end of C76 characteristically shifted upfield more than the other carbons in the host-guest complex, indicating that these polar carbons reside most deeply inside the cavity of the calix[5]arene.     

Ultra-high-sensitive extraction-photometric determination of sodium ion using flow injection analysis with a chromogenic calix[4]arene derivative and a laser interferometric photothermal detector

A novel flow injection analysis (FIA) system for ultra-high-sensitive determination of Na(+), which involves laser interferometric photothermal equipment as the detector, was designed using a proton-dissociable chromogenic calix[4]arene derivative with a dinitrophenol moiety as the extraction-photometric reagent. The chromogenic calix[4]arene derivative showed an excellent extractability toward Na(+), which reflected the cation-complexing property of the tetraethyl ester derivative of calix[4]arene. As the calibration graph of the Na(+) concentration could be successfully obtained at the nanomolar level by this method, the proposed FIA system was found to be promising for highly sensitive determination of Na(+) in very dilute samples such as supply water and cooling water in power plants.     

Removal efficiency of a calix[4]arene-based polymer for water-soluble carcinogenic direct azo dyes and aromatic amines

A Mannich base derivative of 5,11,17,23-tetrakis-[(1,4-dioxa-8-azaspiro-[4.5]decanyl)methyl]-25,26,27,28-tetrahydroxy calix[4]arene 3 was synthesized by the treatment of calix[4]arene with a cyclic secondary amine (1,4-dioxa-8-azaspiro-[4.5]decane) and formaldehyde. The compound 3 was treated with dibromoxylene to obtain a calix[4]arene-based copolymer 4. In batch sorption experiments of selected carcinogenic azo dyes and aromatic amines, the compounds 3 and 4 were found to be a better sorbent for azo dyes than for the aromatic amines. It was observed that the percentage of azo dye removal was 95-99% for compound 3 and 83-97% for 4 when the pH of the dye solution was in the range of 2.0-8.0. The sorption of azo dyes and aromatic amines by calix[4]arenes-based compounds indicates that amino groups play the major role for the formation of hydrogen bonds and electrostatic interactions.     

Molecular recognition of protonated polyamines at calix[4]crown-5 self-assembled monolayer modified electrodes by impedance measurements

Molecular recognition of protonated aliphatic polyamines has been studied at calix[4]crown-5 self-assembled monolayer modified gold electrodes by electrochemical impedance spectroscopic (EIS) experiments. The energy of complex formation between the calix [4]crown-5 molecule and a series of alkyl ammonium ions was shown by molecular modeling and EIS experiments to depend on the number of amine groups in the alkyl chain as well as the number of methylene groups between the amine groups. The structures of complexes formed between the crown ether on the lower rim of calix[4]arene and protonated amines were determined by minimizing the complex formation energies. The adducts thus formed on the SAM rendered the electron transfer from the electrode to the probe (Fe(CN)63-/4- pair) easier or more difficult depending on the number of ammonium groups and their arrangement in linear alkyl chains. Analytical procedures have been developed to detect protonated spermidine (a recognized cancer marker) in simulated urine, blood, erythrocyte, and cerebrospinal fluids.     

Surface-enhanced micro-Raman detection and characterization of calix[4]arene-polycyclic aromatic hydrocarbon host-guest complexes

Surface-enhanced micro-Raman spectroscopy (micro-SERS) was used to detect traces of the hazardous pollutant polycyclic aromatic hydrocarbons (PAHs) pyrene and benzo[c]phenanthrene deposited onto a calix[4]arene-functionalized Ag colloidal surface. High spectral reproducibility and very low molecular detection limits (10(-8) M) were obtained by using 25,27-carboethoxy-26,28-hidroxy-p-tert-butylcalix[4]arene as host molecule. Films of immobilized aggregated Ag nanoparticles, obtained by chemical reduction with hydroxylamine, were prepared by direct adhesion on a glass surface. The influence of the aggregation degree of the initial Ag nanoparticles on the micro-SERS detection effectiveness was checked. Different relative concentrations of the host (calixarene receptor) and the guest (PAHs) were attempted in order to optimize detection of the pollutant. The obtained results indicated that the detection limit is much lower in the case of benzo[c]phenanthrene than in pyrene when exciting with the 785 nm line of a diode laser. A detailed interpretation of the Raman spectra was accomplished in order to obtain more information about the interaction mechanism of the host-guest complex, which could be useful in the future for the design of powerful detection systems.     

Solvent extraction and stripping of silver ions in room-temperature ionic liquids containing calixarenes

We found that a calix[4]arene-bearing pyridine is soluble in a typical room-temperature ionic liquid (RTIL), 1-alkyl-3-methylimidazolium hexafluorophosphate. Pyridinocalix[4]arene showed a high extraction ability and selectivity for silver ions. The extraction performance of the calix[4]arene was greatly enhanced by dissolution in RTILs compared to in chloroform. In a competitive extraction test using five different metal ions (Ag+, Cu2+, Zn2+, Co2+, Ni2+), only silver ions were transferred by the calix[4]arene from the aqueous feed phase into the RTILs, through a cation-exchange mechanism. The pyridinocalix[4]arene was found to form a stable 1:1 complex with silver ions, both by slope analysis and by Job's method. Since it is easy to strip silver ions from RTILs by controlling the aqueous-phase pH, the extraction performance of calix[4]arene in RTILs was maintained after five repeated uses.     

Extraction of cesium and americium with <Emphasis Type="Italic">p</Emphasis>-alkylcalix[8]arenes from alkaline solutions

Previously unknown isononylcalix[8]arene was synthesized from commercially available isononylphenol. The properties of the product (solubility, extraction ability, tendency to aggregation) were compared with those of the known tert-butylcalix[8]arene. The extraction of ¹³⁷Cs, ^99mTc, and ²⁴¹Am from alkaline carbonate solutions with solutions of p-alkylcalix[8]arenes (alkyl = tert-butyl, isononyl) in tetrachloroethylene was studied. The dependence of the distribution ratios on pH of the aqueous phase in the interval from 11 to 13.9 and on the nature of functional groups in the calixarene core was determined. The composition of extractable solvates of cesium and americium with calix[8]arenes was found. Calix[8]arenes extract cesium from alkaline solutions more efficiently than p-tert-butylphenol, their nonmacrocyclic analog, does. tert-Butylcalix[8]arene exhibits the highest performance, which may be due to formation of aggregates 5.7 ± 0.8 nm in diameter in the organic phase at pH 13.5 of the aqueous phase. The isononyl derivative exists in the monomeric form (particle diameter 1.9 ± 0.5 nm).     

Sorption characteristics of Cu(II) ions onto silica gel-immobilized calix[4]arene polymer in aqueous solutions: batch and column studies

In the present study, Cu(II) removal from aqueous solutions by sorption was investigated. Aminopropyl silica gel-immobilized calix[4]arene polymer (APSIC[4]P) was used in sorption as sorbent. During the experimental part of this study, the effect of parameters, such as pH, initial Cu(II) concentration, temperature on Cu(II) removal was observed. In addition, sorption isotherm studies and column studies were made. Maximum Cu(II) removal was obtained at pH 6 and 25 degrees C. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was determined that the experimental data confirmed to Langmuir isotherm model. Batch sorption capacity (q0) was calculated as 5.08 mg/g. The capacity value for column study was obtained by graphical integration as 1.14 mg/g. The Thomas and the Yoon-Nelson models were applied to experimental data to predict the breakthrough curves and to determine the characteristics parameters of the column useful for process design.     

An efficient calix[4]arene based silica sorbent for the removal of endosulfan from water

The present work explores sorption behavior of calix[4]arene based silica resin to remove α and β endosulfan isomers from aqueous solution. The efficiency of resin was checked through both batch and column sorption methods. In both methods, the sorption parameters, i.e. pH, equilibrium time, shaking speed and sorbent dosage were optimized as 2, 60 min, 125 rpm and 50 mg, respectively. Freundlich and Langmuir sorption isotherm models were applied to validate the sorption process. The data obtained in both models reveal that the sorption is favorable. Column sorption data were analyzed through Thomas model to calculate kinetic coefficient k(TH) and maximum sorption capacity q(o) of the resin, which were found to be 6.18 and 5.83 cm(3) mg(-1) min(-1) as well as 1.11 and 1.08 mg g(-1) for α and β endosulfan, respectively. Kinetics of sorption shows that it follows pseudo second order rate equation. The optimized method has also been applied to real water samples and the results show that calix[4]arene based silica resin is an effective sorbent to remove endosulfan from waste waters.     

Comparison of sensing characteristics of ChemFEC devices based on spin-coated thin films of calix[n]arenes

ChemFECs (chemical field effect capacitors) or EIS (Electrolyte-Insulator-Semiconductor) devices were coated with calix[n]arene macrocycles for cation sensors development. Silicon nitride surface electrodes were spin-coated with p-tert-butylcalix[n]arene molecules for n = 8, 9 and 11. Electrochemical capacitance measurements were carried out to evaluate the sensitivity of the calix[n]arene layers towards specific cations as calcium and copper ions. Sensor responses were due to the “host-guest” specific interaction between the rigid cavity of calix[n]arene receptors (ligand) and chemical ion species. The developed chemical sensors have demonstrated good analytical characteristic in terms of: stability, selectivity and lifetime. In addition, experimental results were fitted using the site binding model in order to determine complex association constants, pK (1.9 ≤ pK ≤ 6.39) and surface density of ligands, N_L (9.10¹⁴ ≤ N_L ≤ 2.10¹⁶). All results obtained in this work were compared with those obtained using silicon dioxide EIS electrodes coated with the same calix[n]arene receptors using both spin-coating and thermal evaporation deposit processes.     

Colorimetric detection of pesticides based on calixarene modified silver nanoparticles in water

Highly stable silver nanoparticles modified with p-sulfonatocalix[n]arene (n = 4, 8) were synthesized via a one-pot protocol in aqueous media and characterized by transmission electron microscopy, FT-IR and UV-vis spectroscopy. In comparison with p-sulfonatocalix[8]arene modified silver nanoparticles, p-sulfonatocalix[4]arene modified silver nanoparticles can be utilized as a novel colorimetric probe for optunal, allowing a rapid quantitative assay of optunal down to a concentration of 10(-7)?M, showing a great potential for application to real-time in situ detection of optunal. The possible mechanism is discussed.     

Preparation, characterization of cellulose-grafted with calix[4]arene polymers for the adsorption of heavy metals and dichromate anions

In this paper, the adsorbents were prepared from cellulose-grafted with calix[4]arene polymers (CGC[4]P-1 and CGC[4]P-2) and their sorption properties studied. The polymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, thermal gravimetric analysis and scanning electron microscopy. They were then used to evaluate the sorption properties of some heavy metal cations (Co(2+), Ni(2+), Cu(2+), Cd(2+), Hg(2+) and Pb(2+)) and dichromate anions (Cr(2)O(7)(2-)/HCr(2)O(7)(-)). Results showed that CGC[4]P-2 was a good sorbent for heavy metal cations while CGC[4]P-1 was ineffective. In the studies of dichromate anion sorption, it was observed that CGC[4]P-2 was a more highly effective sorbent at pH 1.5 than was CGC[4]P-1.     

Pyrophosphate sensing by a fluorescent Zn2+ bound triazole linked imino-thiophenyl conjugate of calix[4]arene in HEPES buffer medium: spectroscopy, microscopy, and cellular studies

An in situ prepared Zn(2+) complex of triazole linked imino-thiophenyl conjugate of calix[4]arene, [ZnL], was demonstrated to be highly fluorescent in HEPES buffer solution. [ZnL] has been used as a chemo-sensing ensemble for the recognition of phosphates in general and pyrophosphates in particular among the eighteen different anions studied. The chemo-sensing behavior of the [ZnL] has been demonstrated through fluorescence, absorption, visual fluorescent color changes, ESI MS, and (1)H NMR titrations. Variations in the microstructural features of L, its zinc complex and the complex upon addition of PPi have been demonstrated through atomic force microscopy and transmission electron microscopy. Such studies have been extended to see the permeability of the conjugate into the HeLa cells by fluorescence microscopy. In accession, a reversible "write-read-erase-read" logic gate property of L has been demonstrated through a feedback loop in the presence of Zn(2+) and PPi.     

Anelastic processes in calix[n]arene-type organic molecules

We measured the anelastic spectrum of two organic molecules, calix[4]arene and p-tert-but-calix[4]arene. In both samples, a peak observed around 45–60 K for a measurement frequency of about 1 kHz was ascribed to the hopping of H atoms of the O---H groups, due to the close similarity of the physical parameters of these peaks with those obtained by a NMR relaxometry study. The present results reveal that anelastic spectroscopy is a good tool for studying atomic motion inside molecules at a mesoscopic level.