Synthesis and characterization of platinum(II) complexes with 2,2'-bipyridine derivative supporting ligands

The reaction of the [Pt(bpy-R)Cl2](bpy-R: R=H (2,2'-bipyridine); R=CH3 (4,4'-dimethyl-2,2'-biypridine (DM-bpy), 3,3'-5,5'-tertamethyl-2,2'-bipyridiyl (TM-bpy)) with 1,4-Bis(5'-2',2"-bipyridine)benzene (bpy-Ph-bpy) affords the following mono- and di-platinum complexes of [(bpy)Pt(bpy-Ph-bpy)][PF6]2 (1), [(bpy)Pt(bpy-Ph-bpy)Pt(bpy)])[PF6]4 (2), [(DM-bpy)Pt(bpy-Ph-bpy)])][PF6]2 (3), and [(TM-bpy)Pt(bpy-ph-bpy)[PF6]2 (4), respectively. These complexes were characterized by NMR, IR, UV/VIS, PL and cyclic voltammetry. The internal quantum yields of these platinum(II) complexes are very high (0.83-0.99) and these complexes emit light at deep blue regions (373-417 nm). The redox behavior of complexes 1 and 2 shows quasi-reversible process.     

Ultrathin ruthenium(II) complex-H4SiW12O40 multilayer film

A dipolar Ru(II) complex, [(bpy)2Ru(bpbh)Ru(bpy)2](ClO4)4 {where bpbh = 1,6-bis-[2-(2-pyridyl) benzimidazoyl]hexane, bpy = 2,2'-bipyridine}, was synthesized and characterized. A multilayer film of at least 18 layers was successfully prepared by alternating adsorption of H4SiW12O40 and [Ru2(bpy)4(bpbh)](ClO4)4 by electrostatic layer-by-layer self-assembly. The multilayer films were studied by ultraviolet-visible and X-ray photoelectron spectroscopy, atomic force microscopy, and cyclic voltammetry.     

Redox mediation and photomechanical oscillations involving photosensitive cyclometalated Ru(II) complexes, glucose oxidase, and peroxidase

Intact photosensitive cyclometalated RuII derivatives of 2-phenylpyridine or N,N-dimethylbenzylamine cis-[Ru-(C approximately N)(LL)X2]PF6 [C approximately N = o-C6H4-py or o-C6H4CH2NMe2; LL = 1,10-phenanththroline (phen), 2,2'-bipyridine (bpy), or 4,4'-Me2-2,2'-bipyridine (Me2bpy); X = MeCN or pyridine (py)] are efficient mediators of glucose oxidase (GO) from Aspergillus niger and horseradish peroxidase (HRP). Their redox potentials in an aqueous buffer are in the range 0.15-0.35 V versus SCE, and the rate constants for the oxidation GO(red) (where red indicates reduced) by the electrochemically generated RuIII species equal (1.7-2.5) x 10(6) M(-1) s(-1) at pH 7 and 25 degrees C. The redox potentials of all complexes decrease cathodically by 0.4-0.6 V upon irradiation by visible light because of the photoinduced solvolysis of acetonitrile or py ligands. These in situ generated species display an even better mediating performance with HRP, although their behavior toward GO is different. The loading of a ruthenium unit into the protein interior brings about large catalytic currents in a self-assembled system GO-Ru-D-glucose. The estimated rate constant for intramolecular electron transfer from FADH2 of the active site at RuIII, k(intra), equals 4.4 x 10(3) s(-1). This suggests that the distance between the redox partners is around 19 A. The value of 21 A was obtained through the docking analysis of a possible closest-to-FAD localization of a Ru-containing fragment derived from the irradiated complex cis-[Ru(o-C6H4-py)-(phen)(MeCN)2]PF6. The operational stability of the GO-Ru assemblies depends on the nature of complex used, the highest being observed for cis-[Ru(o-C6H4-py)(Me2-bpy)(MeCN)2]PF6 (2). UV-vis studies of interaction of 2 with GO revealed photomechanical oscillations in the system GO-Ru-D-glucose. When irradiated complex 2 is mixed with GO and D-glucose, the absorbance at 510 nm increases because of the enzymatic reduction of RuIII to RuII. The absorbance drops rapidly and then increases as in the first cycle after shaking the reaction solution. Many cycles are possible, and the rate of absorbance increase does not depend on a cycle number. A plausible mechanism of the oscillations is presented.     

A single calibration graph for the direct determination of ascorbic and dehydroascorbic acids by electrogenerated luminescence based on Ru(bpy)(3)2+ in aqueous solution

Ascorbic (H2A) and dehydroascorbic (DA) acids were for the first time directly determined in a single chromatographic run by means of the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)(3)2+) based electrogenerated chemiluminescence (ECL) detection. For the first time, it was demonstrated that DA, a nonelectroactive compound, is ECL active and is responsible for the ECL behavior of H2A. This fact, together with the lack of a DA standard, suggested the use of a calibration graph obtained for H2A, for determining both analytes. The proven ECL activity of DA, together with literature data relative to the standard redox potentials of the different species coming from H2A, led to a reconsideration of the proposed ECL reaction mechanism for H2A. The role of the OH- ion in the reaction mechanism of the two analytes appeared to be crucial. H2A and DA could be separated by a suitable C18-reversed-phase HPLC column using an aqueous 30 mM H3PO4 solution as the mobile phase. The optimal ECL response was achieved by polarizing the working electrode at 1.150 Vvs SCE (standard calomel electrode) (oxidation diffusion limiting potential for both H2A and Ru(bpy)(3)2+). The Ru(bpy)(3)2+ solution, at pH 10 for carbonate buffer, was mixed to the eluent solution in a postcolumn system, obtaining, still at pH 10, the final 0.25 mM Ru(bpy)(3)2+ concentration. The detection limit found for the two analytes was 1 x 10(-7) M. The method was successfully applied to the determination of the analytes in a commercially available orange fruit juice.     

Electrogenerated chemiluminescence from R(bpy)3(2+) ion-exchanged in carbon nanotube/perfluorosulfonated ionomer composite films

The electrochemistry and electrogenerated chemiluminescence (ECL) of ruthenium(II) tris(bipyridine) (Ru(bpy)(3)(2+)) ion-exchanged in carbon nanotube (CNT)/Nafion composite films were investigated with tripropylamine (TPA) as a coreactant at a glassy carbon (GC) electrode. The major goal of this work was to investigate and develop new materials and immobilization approaches for the fabrication of ECL-based sensors with improved sensitivity, reactivity, and long-term stability. Ru(bpy)(3)(2+) could be strongly incorporated into Nafion film, but the rate of charge transfer was relative slow and its stability was also problematic. The interfusion of CNT in Nafion resulted in a high peak current of Ru(bpy)(3)(2+) and high ECL intensity. The results indicated that the composite film had more open structures and a larger surface area allowing faster diffusion of Ru(bpy)(3)(2+) and that the CNT could adsorb Ru(bpy)(3)(2+) and also acted as conducting pathways to connect Ru(bpy)(3)(2+) sites to the electrode. In the present work, the sensitivity of the ECL system at the CNT/Nafion film-modified electrodes was more than 2 orders of magnitude higher than that observed at a silica/Nafion composite film-modified electrode and 3 orders of magnitude higher than that at pure Nafion films. The CNT/Nafion composite film-modified GC electrodes also exhibited long-term stability.     

Scanning electrochemical microscopy. 56. Probing outside and inside single giant liposomes containing Ru(bpy)32+

Giant liposomes containing Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) were prepared as model systems for biomembranes and cells and studied by scanning electrochemical microscopy (SECM). Conical carbon fiber tips of submicrometer size were used to approach, image, and puncture individual liposomes immobilized on glass substrates. SECM images of the liposomes were obtained, and the leakage of Ru(bpy)(3)(2+) through the lipid membrane was probed. The tip was also pushed into liposomes and characteristic breakthrough transients, corresponding to liposomes with different compartmental configurations, were obtained. Voltammograms were obtained with the tip inside a single liposome after breaking through the membrane, and the influx of mediator and efflux of encapsulant after puncture could be observed.     

新型钌联吡啶配合物光电性能研究进展

钌（Ⅱ）三联吡啶配合物及其衍生物的广泛而深入的研究,已经促进了纯粹与应用化学多个分支学科的发展,特别是在光化学、光物理、电化学、光致电化学、化学荧光、电子荧光、电子和能量转移及非线性光学等领域钌（Ⅱ）三联吡啶配合物扮演着重要的角色,并将其应用于物质的定性与定量分析和分子标定。本文我们从调研国内外有关研究出发,结合理论和研究开发技术等方面,总结了当前钌（Ⅱ）三联吡啶配合物及其衍生物的性质、用途及研究状况。     

Real-Time Electrochemical PCR with a DNA Intercalating Redox Probe

The proof-of-principle of a nonoptical real-time PCR method based on the electrochemical monitoring of a DNA intercalating redox probe that becomes considerably less easily electrochemically detectable once intercalated to the amplified double-stranded DNA is demonstrated. This has been made possible thanks to the finding of a redox intercalator that (i) strongly and specifically binds to the amplified double-stranded DNA, (ii) does not significantly inhibit PCR, (iii) is chemically stable under PCR cycling, and (iv) is sensitively detected by square wave voltammetry during PCR cycling. Among the different DNA intercalating redox probes that we have investigated, namely, methylene blue, Os[(bpy)(2)phen](2+), Os[(bpy)(2)DPPZ](2+), Os[(4,4'-dimethyl-bpy)(2)DPPZ](2+) and Os[(4,4'-diamino-bpy)(2)DPPZ](2+) (with bpy = 2,2'-bipyridine, phen = phenanthroline, and DPPZ = dipyrido[3,2-a:2',3'-c]phenazine), the one and only compound with which it has been possible to demonstrate the proof-of-concept is the Os[(bpy)(2)DPPZ](2+). In terms of analytical performances, the methodology described here compares well with optical-based real-time PCRs, offering finally the same advantages than the popular and routinely used SYBR Green-based real-time fluorescent PCR, but with the additional incomes of being potentially much cheaper and easier to integrate in a hand-held miniaturized device.     

Quenching of electrogenerated chemiluminescence by phenols, hydroquinones, catechols, and benzoquinones

Efficient quenching of Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) electrogenerated chemiluminescence has been observed in the presence of phenols, catechols, hydroquinones, and benzoquinones. In most instances, quenching is observed with 100-fold excess of quencher over Ru(bpy)(3)(2+), with complete quenching observed between 1000- and 2000-fold excess. The mechanism of quenching is believed to involve energy transfer from the excited-state luminophore to benzoquinone. In the case of phenols, catechols, and hydroquinones, quenching is believed to occur via a benzoquinone derivative formed at the electrode surface. Photoluminescence and UV-visible experiments coupled with bulk electrolysis support the formation of benzoquinone products upon electrochemical oxidation.     

Photoelectrochemical reactions of electrodes modified with composites between conjugated polymer or ruthenium complex and single-walled carbon nanotubes

Composite materials between conjugated polymer; poly[2-methoxy-5-(2'-ethylhexyloxy)-1.4-phenylene vinylene] (MEHPPV), or ruthenium(II)-tris(2,2'-bipyridine) (Ru(bpy)₃²⁺)-poly(sodium 4-styrenesulfonate) (PSS) complex and single-walled carbon nanotubes (SWNTs) were fabricated using polymer wrapping method. Formation of SWNT/MEHPPV or SWNT/PSS/Ru(bpy)₃²⁺ composite was confirmed by absorption and fluorescence spectra, and AFM images. Electrode modified with SWNT/MEHPPV or SWNT/PSS/Ru(bpy)₃²⁺ composite was prepared by casting from DMF solution of SWNT/MEHPPV or aqueous solution of SWNT/PSS/Ru(bpy)₃²⁺. The electrode modified with SWNT/MEHPPV or SWNT/PSS/Ru(bpy)₃²⁺ composite showed photocurrent response due to photoexcitation of MEHPPV or Ru(bpy)₃²⁺. The photocurrents are ascribed to photoinduced electron-transfer reaction from excited state of MEHPPV or Ru(bpy)₃²⁺ to SWNT.     

Electrochemiluminescent detection of metal cations using a ruthenium(II) bipyridyl complex containing a crown ether moiety

The effects of metal ions on the electrochemiluminescence (ECL) properties of (bpy)2Ru(AZA-bpy) (bpy = 2,2'-bipyridine; AZA-bpy = 4-(N-aza-18-crown-6-methyl-2,2'-bipyridine) have been investigated. The electrochemistry, photophysics and ECL of Ru(bpy)3(2+) in the presence of Pb2+, Hg2+, Cu2+, and K+ are reported. The anodic oxidation of Ru(bpy)3(2+) produces ECL in the presence of tri-n-propylamine (TPrA) in 50:50 (v/v) CH3CN:H2O solution. Increases in ECL efficiency (photons generated per redox event) up to 20-fold that depend on both the concentration and nature of the metal ion have been observed, making this an interesting system for electrochemiluminescence metal ion sensing.     

Directed synthesis of a new decamolybdate-encapsulated nanocage framework by mixed-ligands for light-driven hydrogen generation

Clean Technologies and Environmental Policy - A new compound [CuICuII2(bpy)(pzta)2][HMo10O34] {CuICuII2-Mo10, pzta = 3-(pyrid-4-yl) pyrazole and bpy = 4,4’-bipyridine}...     

Nafion-tris(2-2'-bipyridyl)ruthenium(II) Ultrathin Langmuir-Schaefer films: redox catalysis and electrochemiluminescent properties

A simple procedure to incorporate tris(2-2'-bipyridyl)ruthenium(II), [Ru(bpy)3]2+, into Nafion Langmuir-Schaefer (LS) films is described. Nafion LS films (tens of nanometers thick) were formed on quartz glass and indium tin oxide (ITO) directly from Nafion-[Ru(bpy)3]2+ Langmuir films assembled at the water-air interface. This procedure allowed the direct incorporation of [Ru(bpy)3]2+ into Nafion films without the need for subsequent loading. UV-vis spectroscopy confirmed the successful incorporation of [Ru(bpy)3]2+ within the LS films and showed that the amount of [Ru(bpy)3]2+ immobilized in this way scaled with film thickness. Voltammetric studies on ITO-modified electrodes confirmed the successful incorporation of [Ru(bpy)3]2+ and demonstrated that [Ru(bpy)3]2+ was retained within the ultrathin films over a long time scale. These electrodes were tested for the electrocatalytic reduction of tripropylamine. Significant catalysis was observed due to the rapid turnover of [Ru(bpy)3]2+/3+ between the electrode surface and outer boundary of the film, as a direct consequence of the ultrathin film dimensions. Concomitant electrochemiluminescence (ECL) was demonstrated highlighting the potential of this material for sensing applications.     

Electrogenerated chemiluminescence. 72. Determination of immobilized DNA and C-reactive protein on Au(111) electrodes using tris(2,2'-bipyridyl)ruthenium(II) labels

Anodic electrogenerated chemiluminescence (ECL) with tri-n-propylamine (TPrA) as a coreactant was used to determine DNA and C-reactive protein (CRP) by immobilizations on Au(111) electrodes using tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) labels. A 23-mer synthetic single-stranded (ss) DNA derived from the Bacillus anthracis with an amino-modified group at the 5' end position was covalently attached to the Au(111) substrate precoated with a self-assembled thiol monolayer of 3-mercaptopropanoic acid (3-MPA) in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDAC) and then hybridized with a target ssDNA tagged with Ru(bpy)(3)(2+) ECL labels. Similarly, biotinylated anti-CRP species were immobilized effectively onto the Au(111) substrate precovered with a layer of avidin linked covalently via the reaction between avidin and a mixed thiol monolayer of 3-MPA and 16-mercaptohexadecanoic acid on Au(111) in the presence of EDAC and N-hydroxysuccinimide. CRP and anti-CRP tagged with Ru(bpy)(3)(2+) labels were then conjugated to the surface layer. ECL responses were generated from the modified electrodes described above by immersing them in a TPrA-containing electrolyte solution. A series of electrode treatments, including blocking free -COOH groups with ethanol amine, pinhole blocking with bovine serum albumin, washing with EDTA/NaCl/Tris buffer, and spraying with inert gases, were used to reduce the nonspecific adsorption of the labeled species. The ECL peak intensity was linearly proportional to the analyte CRP concentration over the range 1-24 microg/mL. CRP concentrations of two unknown human plasma/serum specimens were measured by the standard addition method based on this technique.     

Surfactant chain length effects on the light emission of tris(2,2'-bipyridyl)ruthenium(II)/ tripropylamine electrogenerated chemiluminescence

The effects of nonionic surfactant chain length on the properties of tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)3(2+) where bpy = 2,2'-bipyridine) electrochemiluminescence (ECL) have been investigated. The electrochemistry, photophysics, and ECL of Ru(bpy)3(2+) in the presence of a series of nonionic surfactants are reported (Triton X-100, 114, 165, 405, 305, and 705-70). These surfactants differ in the number of poly(ethylene oxide) units incorporated into the surfactant molecule. The anodic oxidation of Ru(bpy)3(2+) produces ECL in the presence of tri-n-propylamine (TPrA) in aqueous surfactant solution. Increases in ECL efficiency (> or = 5-fold) and TPrA oxidation current (> or = 2-fold) have been observed in surfactant media. Slight decreases in ECL intensity are observed as the chain length of the nonionic surfactant increases. The data supports adsorption of surfactant on the electrode surface, thus facilitating TPrA and Ru(bpy)3(2+) oxidation and leading to higher ECL efficiencies.     

Spectroelectrochemical sensing based on multimode selectivity simultaneously achievable in a single device. 16. Sensing by fluorescence

A fluorescence spectroelectrochemical sensor capable of detecting very low concentrations of metal complexes is described. The sensor is based on a novel spectroelectrochemical sensor that incorporates multiple internal reflection spectroscopy at an optically transparent electrode (OTE) coated with a selective film to enhance detection limits by preconcentrating the analyte at the OTE surface. Nafion was used as the selective cation exchange film for detecting Ru(bpy)(3)(2+), the model analyte, which fluoresces at 605 nm when excited with a 441.6-nm HeCd laser. The unoptimized linear dynamic range of the sensor for Ru(bpy)(3)(2+) is between 1 x 10(-)(11) and 1 x 10(-)(7) M with a calculated 2 x 10(-)(13) M detection limit. The sensor employs extremely thin films ( approximately 12 nm) without significantly sacrificing its sensitivity. The sensor response is demonstrated with varying film thicknesses. A state-of-the-art flow cell design allows variable cell volumes as low as approximately 4 microL. Fluorescence of the sample can be controlled by electromodulation between 0.7 and 1.3 V. Sensor operation is not reversible for the chosen model film (Nafion) and sample (Ru(bpy)(3)(2+)) but it can be regenerated with ethanol for multiple uses.     

Electrogenerated chemiluminescence. 58. Ligand-sensitized electrogenerated chemiluminescence in europium labels

The electrochemistry and electrogenerated chemiluminescence (ECL) of a series of europium chelates, cryptates, and mixed-ligand chelate/cryptand complexes were studied. The complexes were of the following general forms: EuL(4)(-), where L = β-diketonate, a bis-chelating ligand (such as dibenzoylmethide), added as salts (A)EuL(4), where A = tetrabutylammonium ion or piperidinium ion (pipH(+)); Eu(crypt)(3+), where crypt = a cryptand ligand, e.g., 4,7,13,16,21-pentaoxa-1,10-diazabicyclo[8,8,5]tricosane; and Eu(crypt)(L)(2+) for the mixed-ligand systems. ECL was obtained for the chelates and mixed-ligand systems by reducing the complexes at a Pt electrode in the presence of peroxydisulfate in acetonitrile solutions and was attributed to the electron-transfer reaction between the reduced bound ligands and SO(4)(?)(-), followed by intramolecular excitation transfer from the excited ligand orbitals to the metal-centered 4f states. No ECL was observed under the same conditions for the europium complexes incorporating only the cryptand ligands in aqueous solution. The ECL spectra matched the photoluminescence spectra with a narrow emission band observed at 612 nm, corresponding to a metal-centered 4f-4f transition. The ECL efficiencies for the ECL-active species were low, about 10(-)(1)-10(-)(4)% of that of the Ru(bpy)(3)(2+)/S(2)O(8)(2)(-) system under similar conditions.     

Electrogenerated chemiluminescence. 77. DNA hybridization detection at high amplification with [Ru(bpy)3]2+-containing microspheres

An ultrasensitive DNA hybridization detection method based on electrogenerated chemiluminescence (ECL) using polystyrene microspheres/beads (PSB) as the carrier of the ECL labels, namely, tris(2,2'-bipyridyl)ruthenium(II) tetrakis(pentafluorophenyl)borate (Ru(bpy)3[B(C6F5)4]2), is reported. Probe single-stranded DNA (p-ssDNA) was attached to the surface of magnetic beads (MB) and hybridized with target-ssDNA (t-ssDNA) with immobilized PSB containing a large number of water insoluble Ru(bpy)3[B(C6F5)4]2 species (approximately 7.5 x 10(9) molecules/bead). With this approach a large amplification factor of Ru(bpy)3[B(C6F5)4]2 molecules for each t-ssDNA can be achieved, when each PSB is attached to a limited number of t-ssDNA. The p-ssDNA-MB <--> t-ssDNA-PSB/Ru(bpy)3(2+) conjugates formed were magnetically separated from the reaction media and dissolved in MeCN containing tri-n-propylamine (TPrA) as an ECL coreactant. ECL was produced with a potential scan from 0 to 3.0 V versus Ag/Ag+, and the integrated ECL intensity was found to be linearly proportional to the t-ssDNA concentration in a range of 1.0 fM to 10 nM under optimized conditions. ECL signals associated with two base pair mismatched ssDNA and noncomplementary ssDNA can be distinguished well from the ECL signal related to the complementary DNA hybridization. A Poisson distribution is followed when a large number of MB reacts with PSB, and the minimum number of 1.0- and 2.8-microm diameter MB required to bind and magnetically separate a single 10-microm diameter PSB from the reaction solution was estimated to be three and one, respectively. The principle described in this paper could be also applied to many other ECL analyses, such as immunoassays.     

Determination of Dansyl Amino Acids and Oxalate by HPLC with Electrogenerated Chemiluminescence Detection Using Tris(2,2'-bipyridyl)ruthenium(II) in the Mobile Phase

A new electrogenerated chemiluminescence detection method is investigated for use in detection in reversed-phase and reversed-phase ion-pair HPLC with Ru(bpy)(3)(2+) in the mobile phase. In this method, different concentrations of Ru(bpy)(3)(2+) are dissolved in the mobile phase and the HPLC column flushed with the mobile phase for 1 h until the column is saturated with Ru(bpy)(3)(2+). The separated analytes along with Ru(bpy)(3)(2+) pass through an optical-electrochemical flow cell which has a dual platinum electrode held at a potential of 1250 mV vs a Ag/AgCl reference electrode. On the surface of the electrode, Ru(bpy)(3)(2+) is oxidized to Ru(bpy)(3)(3+) which reacts with the analytes to emit light. The retention times, retention orders, detection limits, and linearity in working curves are compared to those obtained with the conventional postcolumn Ru(bpy)(3)(2+) addition method. The retention times for dansyl amino acids with Ru(bpy)(3)(2+) in the mobile phase are longer than those obtained with the postcolumn addition approach. This may be caused by π-to-π interactions between the aromatic groups of the dansyl derivatives and the bipyridyl groups of Ru(bpy)(3)(2+) in the Ru(bpy)(3)(2+)-saturated reversed-phase column. Similarly, oxalate is separated from urine and blood plasma samples by reversed-phase ion-pair HPLC. Plasma samples are obtained using ultrafiltration to remove proteins from whole blood. Retention times for oxalate with the two detection techniques are identical, and detection limits for these techniques are compared.     

Heterobimetallic Ru(II)-Eu(III) complex as chemodosimeter for selective biogenic amine odorants detection in fish sample

Gaseous biogenic amines such as putrescine, spermidine, aniline, and trimethylamine are important biomolecules that play many crucial roles in metabolism and medical diagnostics. A chemodosimetric detection assay has been developed for those gaseous amines by Ru(II)-Eu(III) heterobimetallic complexes, K{[Ru(II)((t)Bubpy)(CN)(4)](2)Eu(III)(H(2)O)(4)} (where (t)Bubpy = 4,4'-di-tert-butyl-2,2'-bipyridine). Synthesis, X-ray crystal characterization, and spectroscopic properties of this Ru(II)-Eu(III) heterobimetallic complex were reported. Binding properties of the Ru(II)-Eu(III) complex with common gases revealed that this complex is very selective to gaseous amine molecules. Sensitivity of this complex toward the amines was found as ～log k() = 4.5-4.8. Real time monitoring of gaseous biogenic amines was applied to real fish samples (Atlantic mackerel) by studying the spectrofluorimetric responses of the Ru(II)-Eu(III) complex toward different biogenic amine concentration. GC/MS studies were also used as a reference for the studies. A linear spectrofluorimetric response was found toward biogenic amine concentration in real fish samples. This complex was found to respond specifically to those biogenic amines down to 10 ppb.