共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
结合金陵石化公司炼油厂加氢裂化装置技术改造过程,分析了含硫原油加工对加氢裂化装置系统腐蚀情况,并提出相应的腐蚀防护措施.本套装置自投产以来.经历了2次炼制高含硫原油的扩能技术改造,加工原油处理量由800kt/a增加到1.2Mt/a;原油硫质量分数由0.3%~0.5%逐渐上升到平均硫质量分数1.5%左右,最高达2.5%,使本套装置加工原油的能力大大提高,同时对处理劣质原油特别是高含硫原油的设备腐蚀问题找到了一些解决办法.提出相应的应对方法和腐蚀防护思路. 相似文献
3.
4.
掺炼俄罗斯原油对塔顶设备腐蚀及防护措施 总被引:1,自引:0,他引:1
炼油厂一套常减压装置在加工大庆与俄罗斯混合原油后,对塔顶管线、换热器、产品罐等设备进行了详细调查,针对腐蚀现象及腐蚀产物,分析了腐蚀机理主要是H_2S-HCL-H_2O腐蚀,并从工艺的“一脱三注”和设备材料两方面提出了相应防护措施。 相似文献
5.
试论我厂加工高酸值原油的技术措施 总被引:4,自引:0,他引:4
介绍了加工高酸值原油面临的主要问题、腐蚀状况、腐蚀机理及防护措施,通过国内炼制高酸值原油炼厂和我厂的实际经验,采用材质升级、碳钢掺铝、加注高温缓蚀剂和完善“一脱三注”等措施,可以有效缓解高酸值原油对设备的腐蚀问题。 相似文献
6.
王瑞杰 《中国石油和化工标准与质量》2011,31(8):281-282
介绍国内石油炼制企业加工高硫、高酸原油典型的腐蚀环境,分析制约装置长周期运行的关键要素,对石油炼制设备腐蚀控制和防护提出必抓的几项工作。 相似文献
7.
原油在常减压装置的硫分布及加工工艺设备防腐措施 总被引:1,自引:0,他引:1
针对目前高硫等劣质原油在炼厂加工所占比例越来越大的趋势,介绍了原油中硫的分布规律及其危害性,含硫原油的腐蚀机理及影响硫腐蚀的各种因素.阐述近年来高硫原油的加工方法及防护措施,着重介绍了茂名分公司作为高硫原油加工基地常减压装置加工高硫原油的经验,并提出了炼厂加工高硫原油的防腐措施和建议. 相似文献
8.
炼油设备的腐蚀问题是炼油厂所面临的主要问题之一,特别是装置在加工高酸原油时,对防腐的要求提出了更高的要求。本文以大榭石化加工高酸原油为研究课题,探讨在加工高酸原油时,装置通过设备选材、工艺优化以及设备腐蚀管理等方面研究,降低高酸原油对装置的腐蚀,同时对装置的防腐提出了的看法。 相似文献
9.
随着我国石油化工行业的快速发展,同时对于石油产品的需求结构也开始逐渐发生变化,随之加氢裂化及精制成套的应用比重逐渐增加。其中对进口高硫原油的加工更是呈现大幅度的增长,因此,对于高硫原油加氢设备在使用过程中出现的腐蚀问题,是我国石油行业企业的需要解决的问题之一。本文对高硫原油加氢设备腐蚀的主要形式进行分析,进而提出相应的防护措施。 相似文献
10.
石油化工设备腐蚀问题的探讨 总被引:1,自引:0,他引:1
介绍了山东东明石化集团公司加工原油性质,原油一、二次加工装置出现的设备腐蚀问题,分析了硫腐蚀的机理,低温及高温硫腐蚀产生的部位及防止的方法,提出了防止设备腐蚀应采用的措施和建议. 相似文献
11.
12.
Sukanya Gangopadhyay Prakash A. Mahanwar 《Journal of Coatings Technology and Research》2018,15(4):789-807
Corrosion is a crucial worldwide problem that strongly affects metals. Out of the several ways to prevent corrosion, volatile corrosion inhibitors (VCIs) are predominantly used as a method of temporary protection. These compounds have the ability to vaporize and condense on the surface of the ferrous or nonferrous material and make the substrate less susceptible to corrosion but work only in a confined space. VCI compounds form a monomolecular layer over the metal surface, thereby preventing the electrochemical reactions on the metal surface which lead to corrosion. This review article outlines the use of volatile corrosion inhibitors (VCIs) as a temporary corrosion protection technique, their working mechanisms and the various compounds used as VCI. It also anchors on the latest research works which have been carried out on VCI coatings along with a glimpse of the works that were carried out in the past. The various factors affecting the volatile corrosion inhibitors along with the merits of VCI coatings are discussed in this paper. Formulations for both strippable and permanent VCI coatings are also reported with the various testing methods. Lastly, an overview of the recent developments of VCI coatings along with the various green VCI is given. 相似文献
13.
交流输电线路不可避免地会对埋地管道及其附属设施产生交流干扰,尤其是管道的阴极保护系统。镁阳极作为阴极保护系统的重要组成部分,明确在不同交流干扰条件下镁阳极的腐蚀行为,对保障管道的安全运行有着十分重要的意义。在传统三电极的基础上外加交流干扰,通过电化学测试分析了不同交流干扰条件下镁阳极的电化学特征。结果表明:随着交流干扰的增大,镁阳极表面生成致密的腐蚀产物层,阻碍了腐蚀反应的发生。这会导致现场镁阳极无法提供足够的阴极保护电流,从而产生管道和相关设施的欠保护问题。 相似文献
14.
15.
16.
17.
本文讲述了在钻井过程中钻具腐蚀类型、腐蚀机理和造成腐蚀的各种因素,并提出了防止钻具腐蚀的各种措施。介绍了在钻具腐蚀与防护研究面临的新挑战。 相似文献
18.
19.
舰艇蒸馏水舱内壁主要使用环氧聚酰胺类涂料作为防护涂料,防止舱壁腐蚀,防护期限一般为5年左右。这类涂料不仅防护期效短,而且在使用过程中涂膜易产生起泡、脱落等现象。本文中以硅氧烷包覆过的片状玻璃鳞片为主要防锈颜料,以低粘度环氧树脂为基料,制备了一种新型高固体份环氧玻璃鳞片涂料。实验表明,该涂料耐中性盐雾试验可达3000小时以上;常温条件下,在蒸馏水浸泡环境中,涂膜的有效防护期可达15年以上,并且经长期的蒸馏水浸泡,侵蚀,漆膜不会有可溶物质溶出,不会影响存储的蒸馏水水质,非常适合于长时间存储高纯度蒸馏水的水柜、水罐等设备的内壁防护需要,可有效满足舰艇、电厂等部门对蒸馏水存储设施的防腐要求。 相似文献
20.
The Zr-2.5% Nb alloy corrosion resistance in four saline solutions with and without albumin was tested through electrochemical measurements of electrochemical impedance spectroscopy (EIS), linear polarization, and cyclic voltammetry at human body temperature.The EIS measurements were performed at open circuit potential. The impedance spectra were recorded and the equivalent electric circuits were elaborated. From the linear polarization the Tafel slopes were recorded and the corrosion parameters were calculated. From the potentiodynamic polarization curves, the breakdown potential, the protection potential, and the protection domain were observed.The amount of ions released from the material was quantified using the ICPMS technique and the results concerning the corrosion resistance were compared with those obtained from linear and cyclic polarization.Before and after potentiodynamic polarization the topographic measurements were performed; the roughness at the samples surface was observed using AFM. The roughness was co-related to the contact angle measurements. 相似文献