共查询到20条相似文献,搜索用时 93 毫秒
1.
张智芳 《仪表技术与传感器》2007,(4):70-70,78
介绍了注聚站的工艺流程及控制要求,并针对该要求设计了控制系统。系统采用PLC作为控制中心。对该系统的功能、硬件配置和软件编写进行了讨论,分析了各I/O模块的功能,并给出了结构框图。该系统具有较好的通用性和扩展性,并已成功地运用在实际生产中。 相似文献
2.
文中介绍了污水处理的工艺流程及控制要求,并针对该要求设计了控制系统。系统采用PLC工作为控制中心。文中对该系统的功能、硬件配置和软件编写进行了讨论,详细分析了各I/O模块的功能,并给出了流程框图。该系统具有较好的通用性和扩展性,并已成功的运用在实际生产中。 相似文献
3.
文章介绍了某型飞机燃油系统燃油泵试验台设计思想和工作原理。并利用PLC和触摸屏技术设计了该装置的控制系统。实际运行测试表明,该装置达到了功能要求,控制系统运行良好。 相似文献
4.
5.
6.
7.
介绍了以MCS-51单片机为核心的精密恒压泵控制系统应用软件的设计思想、结构和功能。该设计利用了检测与自动控制原理,精密恒压泵控制系统采用闭环控制结构,通过PID控制算法实现压力的精确控制。实地测试结果表明,该设计思想能够满足系统的功能要求与精度要求。 相似文献
8.
9.
基于目前我国固体废弃物处理能力不足和效率低下的问题,并根据固体废弃物的特性和传统压缩设备的工况要求,结合PLC自动化应用,设计了一款基于PLC的固体压缩设备系统。实践表明,该系统能较好满足当前生产生活对固体废弃物压缩设备的技术性能要求。 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献