The transformation of a gold film on few-layer graphene to produce either hexagonal or triangular nanoparticles during annealing

The shape transformation of gold directly on graphene has been well studied by thermally annealing gold-deposited graphene samples at the temperature range from 600 to 800 °C. We find that few-layer graphene can be served as a platform to transform a gold film into mainly hexagonal gold nanoparticles (AuNPs) at 600 or 700 °C, or coexistence of hexagonal and triangular AuNPs at 800 °C. Especially, the size and density of these AuNPs are dependent on the number of graphene layers, indicating the strong relationship between gold shape transformation and the number of graphene layers on the substrate. We propose that annealing-induced growth of gold islands and the layer-dependent interactions among Au and n-layer graphene are the two main causes for this shape transformation. Meanwhile, Raman enhancing effects of these AuNPs are also investigated. These faceted AuNPs exhibit excellent SERS effects on Raman spectra of few-layer graphene with the enhancement factors up to several hundreds. Combined with n-layer graphenes, these faceted AuNPs can be used as graphene-based SERS substrates for increasing Raman signals of adsorbed rhodamine 6G molecules with a larger scale than those based on fresh graphenes.     

Microwave-assisted green synthesis of Ag/reduced graphene oxide nanocomposite as a surface-enhanced Raman scattering substrate with high uniformity

A nanocomposite of silver nanoparticles/reduced graphene oxide (Ag/rGO) has been fabricated as a surface-enhanced Raman scattering (SERS) substrate owing to the large surface area and two-dimensional nanosheet structure of rGO. A facile and rapid microwave-assisted green route has been used for the formation of Ag nanoparticles and the reduction of graphene oxide simultaneously with L-arginine as the reducing agent. By increasing the cycle number of microwave irradiation from 1 and 4 to 8, the mean diameters of Ag nanoparticles deposited on the surface of rGO increased from 10.3 ± 4.6 and 21.4 ± 10.5 to 41.1 ± 12.6 nm. The SERS performance of Ag/rGO nanocomposite was examined using the common Raman reporter molecule 4-aminothiophenol (4-ATP). It was found that the Raman intensity of 4-ATP could be significantly enhanced by increasing the size and content of silver nanoparticles deposited on rGO. Although the Raman intensities of D-band and G-band of rGO were also enhanced simultaneously by the deposited Ag nanoparticles which limited the further improvement of SERS detection sensitivity, the detectable concentration of 4-ATP with Ag/rGO nanocomposite as the SERS substrate still could be lowered to be 10⁻¹⁰ M and the enhancement factor could be increased to 1.27 × 10¹⁰. Furthermore, it was also achievable to lower the relative standard deviation (RSD) values of the Raman intensities to below 5%. This revealed that the Ag/rGO nanocomposite obtained in this work could be used as a SERS substrate with high sensitivity and homogeneity.     

Plasmonic Core–Shell–Satellites with Abundant Electromagnetic Hotspots for Highly Sensitive and Reproducible SERS Detection

In this work, we develop a Ag@Al₂O₃@Ag plasmonic core–shell–satellite (PCSS) to achieve highly sensitive and reproducible surface-enhanced Raman spectroscopy (SERS) detection of probe molecules. To fabricate PCSS nanostructures, we employ a simple hierarchical dewetting process of Ag films coupled with an atomic layer deposition (ALD) method for the Al₂O₃ shell. Compared to bare Ag nanoparticles, several advantages of fabricating PCSS nanostructures are discovered, including high surface roughness, high density of nanogaps between Ag core and Ag satellites, and nanogaps between adjacent Ag satellites. Finite-difference time-domain (FDTD) simulations of the PCSS nanostructure confirm an enhancement in the electromagnetic field intensity (hotspots) in the nanogap between the Ag core and the satellite generated by the Al₂O₃ shell, due to the strong core–satellite plasmonic coupling. The as-prepared PCSS-based SERS substrate demonstrates an enhancement factor (EF) of 1.7 × 10⁷ and relative standard deviation (RSD) of ~7%, endowing our SERS platform with highly sensitive and reproducible detection of R6G molecules. We think that this method provides a simple approach for the fabrication of PCSS by a solid-state technique and a basis for developing a highly SERS-active substrate for practical applications.     

Graphene oxide shell-isolated Ag nanoparticles for surface-enhanced Raman scattering

An efficient surface enhanced Raman scattering (SERS) substrate has been developed based on Ag nanoparticle-decorated graphene oxide (GO). The structure of Ag@GO hybrid material was confirmed by X-ray diffraction, transmission and scanning electron microscopy. The as-prepared substrate exhibited the enhancement ability of SERS toward various aromatic dyes, such as Rhodamine 6G, Rhodamine B, and crystal violet. The enhanced Raman signals could be due to the presence of an ultrathin GO shell with 2.8 nm in thickness. In particular, the GO shell could efficient to maintain chemical and optical stability, and improved biocompatibility for this SERS-activity material.     

Raman spectroscopy of morphology-controlled deposition of Au on graphene

By tuning substrate temperatures in a thermal deposition process, Au nanostructures with different morphologies, such as polygons, dendrites, irregular islands and dense clusters have been obtained on graphene surface. The surface-enhanced Raman scattering (SERS) of graphene caused by gold decoration is systematically investigated. The enhancement factor of graphene G band and the extent of G band splitting are found to be dependent on the morphologies of gold clusters. A maximum enhancement factor as high as ∼270 is obtained for polygonal gold film deposited on monolayer graphene. Furthermore, as a SERS substrate, graphene combined with polygonal gold shows the highest Raman enhancing efficiency for crystal violet (CV) molecules. The mechanisms for the above results are discussed.     

Silver nanoparticles protected by monolayer graphene as a stabilized substrate for surface enhanced Raman spectroscopy

Silver nanostructures have been extensively studied as the substrates for surface-enhanced Raman spectroscopy (SERS) due to their strong plasmonic enhancement effect and low loss at optical frequencies. However, unprotected silver nanostructures are chemically unstable under practical conditions, leading frequently to erratic SERS signals and possibly unreliable interpretation of experimental results. Herein, we show that a single layer of graphene grown by chemical vapor deposition can effectively stabilize silver nanoparticles against aerobic oxidation and that the protected nanoparticles can be used as a stable substrate for the production of enhanced SERS signals for up to 28 days under ambient conditions.     

Surface-enhanced Raman scattering of suspended monolayer graphene

Abstract

The interactions between phonons and electrons induced by the dopants or the substrate of graphene in spectroscopic investigation reveal a rich source of interesting physics. Raman spectra and surface-enhanced Raman spectra of supported and suspended monolayer graphenes were measured and analyzed systemically with different approaches. The weak Raman signals are greatly enhanced by the ability of surface-enhanced Raman spectroscopy which has attracted considerable interests. The technique is regarded as wonderful and useful tool, but the dopants that are produced by depositing metallic nanoparticles may affect the electron scattering processes of graphene. Therefore, the doping and substrate influences on graphene are also important issues to be investigated. In this work, the peak positions of G peak and 2D peak, the I_2D/I_G ratios, and enhancements of G and 2D bands with suspended and supported graphene flakes were measured and analyzed. The peak shifts of G and 2D bands between the Raman and SERS signals demonstrate the doping effect induced by silver nanoparticles by n-doping. The I_2D/I_G ratio can provide a more sensitive method to carry out the doping effect on the graphene surface than the peak shifts of G and 2D bands. The enhancements of 2D band of suspended and supported graphenes reached 138, and those of G band reached at least 169. Their good enhancements are helpful to measure the optical properties of graphene. The different substrates that covered the graphene surface with doping effect are more sensitive to the enhancements of G band with respect to 2D band. It provides us a new method to distinguish the substrate and doping effect on graphene.

PACS

78.67.Wj (optical properties of graphene); 74.25.nd (Raman and optical spectroscopy); 63.22.Rc (phonons in graphene)     

Highly effective SERS substrates based on an atomic-layer-deposition-tailored nanorod array scaffold

When two metallic surfaces supporting plasmonic excitation are brought into close proximity of each other, a nanogap (of width on the subwavelength scale) will form, which boosts greatly the local optical field. Based on this idea, we fabricated two types of three-dimensional plasmonic substrates with such nanogaps, taking advantage of both atomic layer deposition (ALD) and the capillary effect. Owing to the counteraction of the gap-reducing and capillary, nanogaps with different widths and profiles have been formed on the scaffold of aligned ZnO nanorods and shown to induce large field enhancement with enhancement factor up to 2.64 × 10(6) for surface-enhanced Raman scattering (SERS).     

Controlled plasmonic nanostructures for surface-enhanced spectroscopy and sensing

After its discovery more than 30 years ago, surface-enhanced Raman spectroscopy (SERS) was expected to have major impact as a sensitive analytical technique and tool for fundamental studies of surface species. Unfortunately, the lack of reliable and reproducible fabrication methods limited its applicability. In recent years, SERS has enjoyed a renaissance, and there is renewed interest in both the fundamentals and applications of SERS. New techniques for nanofabrication, the design of substrates that maximize the electromagnetic enhancement, and the discovery of single-molecule SERS are driving the resurgence of this field. This Account highlights our group's recent work on SERS. Initially, we discuss SERS substrates that have shown proven reproducibility, stability, and large field enhancement. These substrates enable many analytical applications, such as anthrax detection, chemical warfare agent stimulant detection, and in vitro and in vivo glucose sensing. We then turn to a detailed study of the wavelength and distance dependence of SERS, which further illustrate predictions obtained from the electromagnetic enhancement mechanism. Last, an isotopic labeling technique applied to the rhodamine 6G (R6G)/silver system serves as an additional proof of the existence of single-molecule SERS and explores the dynamical features of this process. This work, in conjunction with theoretical calculations, allows us to comment on the possible role of charge transfer in the R6G/silver system.     

Synthesis of Diamond@SiO2@Ag composite materials for high SERS effect

Among various carbon materials, diamond stands out due to excellent physical and chemical properties. In this work, we designed Dia@SiO₂@Ag composites combining diamond micropowder and Ag nanoparticles by a simple chemical method and obtained stable substrate for surface enhanced Raman scattering (SERS) owing to its high surface-to-volume ratio, low density, as well as close bond between diamond and Ag. As-prepared Dia@SiO₂@Ag presented high activity to detect crystal violet and rhodamine 6G molecules, which was demonstrated by significantly enhanced SERS spectra and high enhancement factor values (10⁸-10⁹). Moreover, Dia@SiO₂@Ag also showed desired sensitivity, which was investigated by detection limit. Therefore, our study provided more theoretical support and broadened the functional applications of diamond, particularly in Raman detection.     

Effects of substrate temperatures on improved surface-enhanced Raman scattering

In this work, electrochemical methods were used to prepare surface-enhanced Raman scattering (SERS)-active gold substrates to investigate the effect of substrate temperatures on improved SERS performances. The results indicate that the SERS enhancement capabilities are gradually raised from 25 °C to a maximum at 40 °C and monotonically decreased from 40 to 100 °C. The SERS of rhodamine 6G (R6G) adsorbed on the SERS-active substrate at 40 °C exhibits a higher intensity by 4-fold of magnitude, as compared with that of R6G adsorbed on the SERS-active substrate at 25 °C. Also, SERS of polypyrrole (PPy) deposited on the roughened Au substrate treated at 35 °C exhibits the highest intensity by 3-fold of magnitude, as compared with that of PPy deposited on the same roughened Au substrate at room temperature.     

Characterization of natural rubber/gold nanoparticles SERS‐active substrate

Natural rubber/gold nanoparticles membranes (NR/Au) were studied by ultrasensitive detection and chemical analysis through surface‐enhanced Raman scattering and surface‐enhanced resonance Raman scattering in our previous work (Cabrera et al., J. Raman Spectrosc. 2012, 43, 474). This article describes the studies of thermal stability and mechanical properties of SERS‐active substrate sensors. The composites were prepared using NR membranes obtained by casting the latex solution as an active support (reducing/establishing agents) for the incorporation of colloidal gold nanoparticles (AuNPs). The nanoparticles were synthesized by in situ reduction at different times. The characterization of these sensors was carried out by thermogravimetry, differential scanning calorimetry, scanning electron microscopy (SEM) microscopy, and tensile tests. It is suggested an influence of nanoparticles reduction time on the thermal degradation of NR. There is an increase in thermal stability without changing the chemical properties of the polymer. For the mechanical properties, the tensile rupture was enhanced with the increase in the amount of nanoparticles incorporated in the material. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Large area flexible SERS active substrates using engineered nanostructures

Surface enhanced Raman scattering (SERS) is an analytical sensing method that provides label-free detection, molecularly specific information, and extremely high sensitivity. The Raman enhancement that makes this method attractive is mainly attributed to the local amplification of the incident electromagnetic field that occurs when a surface plasmon mode is excited at a metallic nanostructure. Here, we present a simple, cost effective method for creating flexible, large area SERS-active substrates using a new technique we call shadow mask assisted evaporation (SMAE). The advantage of large, flexible SERS substrates such as these is they have more area for multiplexing and can be incorporated into irregular surfaces such as clothing. We demonstrate the formation of four different types of nanostructure arrays (pillar, nib, ellipsoidal cylinder, and triangular tip) by controlling the evaporation angle, substrate rotation, and deposition rate of metals onto anodized alumina nanoporous membranes as large as 27 mm. In addition, we present experimental results showing how a hybrid structure comprising of gold nanospheres embedded in a silver nano-pillar structure can be used to obtain a 50× SERS enhancement over the raw nanoparticles themselves.     

Direct formation of gold nanoparticles on substrates using a novel ZnO sacrificial templated-growth hydrothermal approach and their properties in organic memory device

This study describes a novel fabrication technique to grow gold nanoparticles (AuNPs) directly on seeded ZnO sacrificial template/polymethylsilsesquioxanes (PMSSQ)/Si using low-temperature hydrothermal reaction at 80°C for 4 h. The effect of non-annealing and various annealing temperatures, 200°C, 300°C, and 400°C, of the ZnO-seeded template on AuNP size and distribution was systematically studied. Another PMMSQ layer was spin-coated on AuNPs to study the memory properties of organic insulator-embedded AuNPs. Well-distributed and controllable AuNP sizes were successfully grown directly on the substrate, as observed using a field emission scanning electron microscope followed by an elemental analysis study. A phase analysis study confirmed that the ZnO sacrificial template was eliminated during the hydrothermal reaction. The AuNP formation mechanism using this hydrothermal reaction approach was proposed. In this study, the AuNPs were charge-trapped sites and showed excellent memory effects when embedded in PMSSQ. Optimum memory properties of PMMSQ-embedded AuNPs were obtained for AuNPs synthesized on a seeded ZnO template annealed at 300°C, with 54 electrons trapped per AuNP and excellent current–voltage response between an erased and programmed device.     

Multiple depositions of Ag nanoparticles on chemically modified agarose films for surface-enhanced Raman spectroscopy

A facile and cost-effective approach for the preparation of a surface-enhanced Raman spectroscopy (SERS) substrate through constructing silver nanoparticle/3-aminopropyltriethoxysilane/agarose films (Ag NPs/APTES/Agar film) on various solid supports is described. The SERS performance of the substrate was systematically investigated, revealing a maximum SERS intensity with four layers of the Ag NP deposition. The enhancement factor of the developed substrate was calculated as 1.5 × 10(7) using rhodamine 6G (R6G) as the probe molecule, and the reproducibility of the SERS signals was established. A high throughput screening platform was designed, manufactured and implemented which utilised the ability to cast agarose to assemble arrays. Quantitative analysis of 4-aminobenzoic acid (4-ABA) and 4-aminothiophenol (4-ATP) was achieved over a ～0.5 nM-0.1 μM range.     

Improved surface-enhanced Raman scattering based on Ag-Au bimetals prepared by galvanic replacement reactions

In this work, the improved surface-enhanced Raman scattering (SERS) of Rhodamine 6G (R6G) adsorbed on Ag-Au bimetals synthesized via galvanic replacement of Ag with Au was first investigated. First, silver substrates were roughened by triangular-wave oxidation-reduction cycles (ORC) in aqueous solutions containing 0.1 M KCl. At the same time, Cl⁻ and Au-containing nanocomplexes in solutions were prepared by treating gold substrates with the similar electrochemically roughening procedures. Then the roughened Ag substrates were incubated in the Cl⁻ and Au-containing solutions for different couples of minutes to undergo the galvanic replacement reactions. Encouragingly, the SERS of R6G adsorbed on this roughened Ag substrate modified by the replacement of Ag with Au for 3 min exhibits a higher intensity by one order of magnitude and a better resolution, as compared with the SERS of R6G adsorbed on an unmodified roughened Ag substrate. The increased SERS effect can be ascribed to the compositions of complexes formed on the substrates. In this optimum condition, the atomic ratio of Ag to Au is ca. 6.6.     

Self-assembly of large-scale gold nanoparticle arrays and their application in SERS

Surface-enhanced Raman scattering is an effective analytical method that has been intensively applied in the field of identification of organic molecules from Raman spectra at very low concentrations. The Raman signal enhancement that makes this method attractive is usually ascribed to the noble metal nanoparticle (NMNP) arrays which can extremely amplify the electromagnetic field near NMNP surface when localized surface plasmon resonance (LSPR) mode is excited. In this work, we report a simple, facile, and room-temperature method to fabricate large-scale, uniform gold nanoparticle (GNP) arrays on ITO/glass as SERS substrates using a promoted self-assembly deposition technique. The results show that the deposition density of GNPs on ITO/glass surface increases with prolonging deposition time, and nanochain-like aggregates appear for a relatively longer deposition time. It is also shown that these films with relatively higher deposition density have tremendous potential for wideband absorption in the visible range and exhibit two LSPR peaks in the extinction spectra because the electrons simultaneously oscillate along the nanochain at the transverse and the longitudinal directions. The SERS enhancement activity of these GNP arrays was determined using 10^-6 M Rhodamine 6G as the Raman probe molecules. A SERS enhancement factor as large as approximately 6.76 × 10⁶ can be obtained at 1,363 cm^-1 Raman shift for the highest deposition density film due to the strong plasmon coupling effect between neighboring particles.     

Size- and time-dependent alteration in metabolic activities of human hepatic cytochrome P450 isozymes by gold nanoparticles via microsomal coincubations

Nano-sized particles are known to interfere with drug-metabolizing cytochrome P450 (CYP) enzymes, which can be anticipated to be a potential source of unintended adverse reactions, but the mechanisms underlying the inhibition are still not well understood. Herein we report a systematic investigation of the impacts of gold nanoparticles (AuNPs) on five major CYP isozymes under in vitro incubations of human liver microsomes (HLMs) with tannic acid (TA)-stabilized AuNPs in the size range of 5 to 100 nm. It is found that smaller AuNPs show more pronounced inhibitory effects on CYP2C9, CYP2C19, CYP2D6, and CYP3A4 in a dose-dependent manner, while 1A2 is the least susceptible to the AuNP inhibition. The size- and dose-dependent CYP-specific inhibition and the nonspecific drug-nanogold binding in the coincubation media can be significantly reduced by increasing the concentration ratio of microsomal proteins to AuNPs, probably via a noncompetitive mode. Remarkably, AuNPs are also found to exhibit a slow time-dependent inactivation of 2D6 and 3A4 in a β-nicotinamide adenine dinucleotide 2′-phosphate reduced tetrasodium salt hydrate (NADPH)-independent manner. During microsomal incubations, UV–vis spectroscopy, dynamic light scattering, and zeta-potential measurements were used to monitor the changes in particle properties under the miscellaneous AuNP/HLM/CYP dispersion system. An improved stability of AuNPs by mixing HLM with the gold nanocolloid reveals that the stabilization via AuNP-HLM interactions may occur on a faster time scale than the salt-induced nanoaggregation by incubation in phosphate buffer. The results suggest that the AuNP induced CYP inhibition can be partially attributed to its adhesion onto the enzymes to alter their structural conformations or onto the HLM membrane therefore impairing the integral membrane proteins. Additionally, AuNPs likely block the substrate pocket on the CYP surface, depending on both the particle characteristics and the structural diversity of the isozymes. These findings may represent additional mechanisms for the differential inhibitory effects arising from the coincubated AuNPs on the metabolic activities of the hepatic CYP isozymes.     

Pulicaria glutinosa Extract: A Toolbox to Synthesize Highly Reduced Graphene Oxide-Silver Nanocomposites

A green, one-step approach for the preparation of graphene/Ag nanocomposites (PE-HRG-Ag) via simultaneous reduction of both graphene oxide (GRO) and silver ions using Pulicaria glutinosa plant extract (PE) as reducing agent is reported. The plant extract functionalizes the surfaces of highly reduced graphene oxide (HRG) which helps in conjugating the Ag NPs to HRG. Increasing amounts of Ag precursor enhanced the density of Ag nanoparticles (NPs) on HRG. The preparation of PE-HRG-Ag nanocomposite is monitored by using ultraviolet–visible (UV-Vis) spectroscopy, powder X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The as-prepared PE-HRG-Ag nanocomposities display excellent surface-enhanced Raman scattering (SERS) activity, and significantly increased the intensities of the Raman signal of graphene.