共查询到20条相似文献,搜索用时 31 毫秒
1.
Poly(vinyl alcohol) (PVA) prepared by full hydrolysis of poly(vinyl acetate) was etherified with propylene oxide and epichlorohydrin. The reaction was done in water with sulfuric acid or sodium hydroxide. Previously, model reactions were carried out on propan‐2‐ol, pentan‐3‐ol, and pentan‐2,4‐diol in order to make the NMR characterization of grafted PVA easier. The new materials were also characterized by DSC and mechanical tests. A determination of their solubility in cold water was done as well. Generally, the prepared polymers showed excellent solubility in water at 10°C and a very low glass‐transition temperature. Consequently, the properties of tension, elongation, elasticity, and resistance were improved. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2868–2874, 2001 相似文献
2.
The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g?1 in distilled water and 55 g·g?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g?1 in distilled water and 47 g·g?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
3.
Poly(vinyl alcohol) (PVA) nanocomposites with pristine sepiolite and heat‐treated (HT) sepiolites were prepared by the method of solution dispersion. The measurements of XRD, FTIR, TEM, and AFM were used for the characterization of the nanocomposites. Furthermore, thermal and optical properties were investigated by TG/DTG/DTA and UV‐visible transmission spectra, respectively. Both the effects of sepiolite/polymer ratio and the structural changes in sepiolite on heating were examined in terms of changes in the properties of the nanocomposites. The addition of sepiolite/HT sepiolites into the PVA matrix resulted in a decrease in the thermal decomposition temperatures of the nanocomposites because of the fact that sepiolite and HT sepiolites facilitated the elimination of the water and acetate groups from the PVA in the second step based on the TG/DTG studies. The HT sepiolites‐PVA nanocomposites had lower thermal stability and more influenced optical clarity than those of the sepiolite PVA, at the same filler levels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
4.
The effect of Na‐alginate content on the gas permeation properties of water‐swollen membranes prepared by varying Na‐alginate and poly(vinyl alcohol) (PVA) content in membranes was investigated. The influences of water content and crystallinity of the membranes on the gas permeation performance of the water‐swollen membranes were studied. The gas permeation rate and selectivity of Na‐alginate/PVA water‐swollen membranes were compared with those of the dry membranes. The permeation rates of nitrogen and carbon dioxide through water‐swollen membranes were in the range of 0.4–7.6 × 10?7 to 3.7–8.5 × 10?6 cm3 (STP)/cm2 s?1 cmHg?1, which were 10,000 times higher than those of dry‐state membranes. The permeation rates of mixture gases through water‐swollen Na‐alginate/PVA membranes were found to increase exponentially with the increase of Na‐alginate content, whereas carbon dioxide concentration in permeates was decreased linearly. It was found that the gas permeance of the water‐swollen membranes increased with increasing the Na‐alginate content in the membrane. Gas permeation rates of the water‐swollen Na‐alginate/PVA membranes increased with increasing the water content in the membrane and decreasing the crystallinity of the membrane. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3225–3232, 2004 相似文献
5.
Poly(vinyl alcohol)‐initiated microwave‐assisted ring opening polymerization of ε‐caprolactone in bulk was investigated, and a series of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) (PVA‐g‐PCL) copolymers were prepared, with the degree of polymerization (DP) of PCL side chains and the degree of substitution (DS) of PVA by PCL being in the range of 3–24 and 0.35–0.89, respectively. The resultant comb‐like PVA‐g‐PCL copolymers were confirmed by means of FTIR, 1H NMR, and viscometry measurement. The introduction of hydrophilic backbone resulted in the decrease in both melting point and crystallization property of the PVA‐g‐PCL copolymers comparing with linear PCL. With higher microwave power, the DP of PCL side chains and DS of PVA backbone were higher, and the polymerization reaction proceeded more rapidly. Both the DP and monomer conversion increased with irradiation time, while the DS increased first and then remained constant. With initiator in low concentration, the DP and DS were higher, while the monomer was converted more slowly. Microwaves dramatically improved the polymerization reaction in comparison of conventional heating method. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 3973–3979, 2007 相似文献
6.
Water‐swollen hydrogel (WSH) membranes for gas separation were prepared by the dip‐coating of asymmetric porous polyetherimide (PEI) membrane supports with poly(vinyl alcohol) (PVA)–glutaraldehyde (GA), followed by the crosslinking of the active layer by a solution method. Crosslinked PVA/GA film of different blend compositions (PVA/GA = 1/0.04, 0.06, 0.08, 0.10, 0.12 mol %) were characterized by differential scanning calorimetry (DSC) and their water‐swelling ratio. The swelling behavior of PVA/GA films of different blend compositions was dependent on the crosslinking density and chemical functional groups created by the reaction between PVA and GA, such as the acetal group, ether linkage, and unreacted pendent aldehydes in PVA. The permeation performances of the membranes swollen by the water vapor contained in a feed gas were investigated. The behavior of gas permeation through a WSH membrane was parallel to the swelling behavior of the PVA/GA film in water. The permeation rate of carbon dioxide through the WSH membranes was 105 (cm3 cm?2 s?1 cmHg) and a CO2/N2 separation factor was about 80 at room temperature. The effect of the additive (potassium bicarbonate, KHCO3) and catalyst (sodium arsenite, NaASO2) on the permeation of gases through these WSH membranes was also studied. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1785–1791, 2001 相似文献
7.
The drawability of melt‐spun poly(vinyl alcohol) (PVA) fibers and its structure evolution during hot‐drawing process were studied by differential scanning calorimetry (DSC), two dimensional X‐ray diffraction (2‐D WAXD) and dynamic mechanical analysis (DMA). The results showed that the water content of PVA fibers should be controlled before hot‐drawing and the proper drying condition was drying at 200°C for 3 min. PVA fibers with excellent mechanical properties could be obtained by drawing at 200°C and 100 mm/min. The melt point and crystallinity of PVA fibers increased with the draw ratio increasing. The 2‐D WAXD patterns of PVA fibers changed from circular scattering pattern to sharp diffraction point, confirming the change of PVA fibers from random orientation to high degree orientation. Accordingly, the tensile strength of PVA fibers enhanced by hot‐drawing, reaching 1.85 GPa when the draw ratio was 16. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012 相似文献
8.
Grafting of poly(ε‐caprolactone) (PCL) and poly(lactide) (PLA) chains on poly(vinyl alcohol) backbone (PVA degree of hydrolysis 99%) was investigated using MgH2 environmental catalyst and melt‐grown ring‐opening polymerization (ROP) of ε‐caprolactone (CL) and L ‐lactide (LA), that avoiding undesirable toxic catalyst and solvent. The ability of MgH2 as catalyst as well as yield of reaction were discussed according to various PVA/CL/MgH2 and PVA/LA/MgH2 ratio. PVA‐g‐PCL and PVA‐g‐PLA were characterized by 1H‐ and 13C‐NMR, DSC, SEC, IR. For graft copolymers easily soluble in tetrahydrofuran (THF) or chloroform, wettability and surface energy of cast film varied in relation with the length and number of hydrophobic chains. Aqueous solution of micelle‐like particles was realized by dissolution in THF then addition of water. Critical micelle concentration (CMC) decreased with hydrophobic chains. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
9.
Water‐resistant modification of poly(vinyl alcohol)/polyamidoxime chelating fibers prepared by emulsion spinning and their adsorption properties
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The poly(vinyl alcohol)/polyacrylonitrile (PVA/PAN) precursor fiber prepared by emulsion spinning was separately crosslinked with dimethyloldihydroxyethyleneurea (DMDHEU), formaldehyde (FA), and both DMDHEU and FA for preparing PVA/polyamidoxime (PAO) chelating fibers with elevated water‐resistance. Effects of different crosslinking systems on the properties of the composite amidoxime chelating fibers have been investigated. Results show that FA treatment can effectively increase the water‐resistance of composite fiber, but would dramatically decrease the adsorption properties of composite fiber. Conversely, DMDHEU treatment has inferior effects on the water‐resistance of the composite fiber, but would impressively increase the adsorption properties of composite fiber. The composite fiber treated with both DMDHEU and FA could reach good overall performances (water contact angle: 94.83°; soft point in hot water: 116 °C; breaking strength in dry condition: 441.80 MPa; the maximum adsorption capacities of precious ions: 1207.66 and 653.59 mg Ag g?1). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44965. 相似文献
10.
A series of hybrid proton‐conducting membranes with an interpenetrating polymer network (IPN) structure was designed with the direct ethanol fuel cell (DEFC) application in mind. In these membranes, glutaraldehyde crosslinked poly(vinyl alcohol) (PVA) were interpenetrated with the copolymer of 2‐acrylamido‐2‐methyl‐propanesulphonic acid (AMPS) and 2‐hydroxyethyl methacrylate (HEMA) crosslinked by poly(ethylene glycol) dimethacrylate (PEGDMA). Silica from the in situ sol–gel hydrolysis of tetraethyl orthosilicate (TEOS) was uniformly dispersed in the polymer matrix. The membranes fabricated as such had ion exchange capacities of 0.84–1.43 meq g–1 and proton conductivities of 0.02–0.11 S cm–1. The membranes exhibited significantly lower fuel permeabilities than that of Nafion. In a manner totally unlike Nafion, fuel permeabilities were lower at higher fuel concentrations, and were lower in ethanol than methanol solutions. These behaviours are all relatable to the unique swelling characteristics of PVA (no swelling in ethanol, partial swelling in methanol and extensive swelling in water) and to the fuel blocking and swelling suppression properties of silica particles. The membranes are promising for DEFC applications since a high concentration of fuel may be used to reduce fuel crossover and to improve the anode kinetics for a resultant increase in both the energy and power densities of the fuel cell. 相似文献
11.
Saffa G. Abd Alla Reham H. Helal Ashraf A. F. Wasfy Abdel Wahab M. El‐Naggar 《应用聚合物科学杂志》2011,121(5):2634-2643
Composites based on poly(vinyl alcohol) (PVA), acrylamide monomer (AM) and sodium montmorillonite clay (MMT) were prepared, in the form of thin films, by solution casting. The PVA/AM/MMT composites films were then exposed to electron beam irradiation to form crosslinked network structure. The structure‐property behavior of PVA/AM/MMT hybrids was demonstrated by x‐ray diffraction (XRD), scanning electron microscopy, gel content, color intensity, thermogravimetric analysis (TGA) and swelling behavior in aqueous solutions. The results indicated that the introduction of MMT clay ratio up to 5% decreased the gel content of PVA/AM hydrogels. The color measurements indicated that the introduction of MMT clay ratio up to 5% was shown to affect the color intensity of composite films. It was found that both PVA/AM hydrogels and PVA/AM/MMT composites reached the equilibrium swelling state in water after four hours; however PVA/AM/MMT composites displayed higher swelling than PVA/AM hydrogels. However, the swelling of PVA/AM hydrogels or their composites at the equilibrium state increased with increasing temperature up to 60°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
12.
Maleate‐denatured poly(vinyl alcohol) (M‐PVA) was crosslinked with heating. The mechanism of crosslinking was studied with several procedures: titration, Fourier transform infrared, and solubility. The carboxyl groups of M‐PVA consisted of carboxylates and a few free carboxyl groups. The crosslink was the ester linkage between hydroxyl and carboxyl groups. Several kinds of M‐PVA tablets were prepared under different conditions: pressures of 200–600 kgf/cm2 and grain sizes of 75 (pass) to 250 μm (on). The swelling behavior of these chemically crosslinked tablets was studied in a buffer solution of pH 7.4, mainly at 37°C. Moreover, the effect of temperature from 5 to 50°C and the effect of repeated swell–dry cycles on the behavior of the tablets in a buffer solution [106 μm (on), 200 kgf/cm2] were studied. The release of p‐acetamidophenol from those tablets in the pH 7.4 buffer solution was studied. The different release patterns were due to the differences in the swelling behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1178–1184, 2002; DOI 10.1002/app.10411 相似文献
13.
Poly(vinyl alcohol) (PVA) grafted with poly(lactide‐co‐glycolide) and cross‐linked as a material of increased hydrophobicity relative to PVA was produced. The properties were examined with respect to the mass loss, water uptake, hydrophilicity, and mechanical characteristics upon hydrolytical degradation. The hydrogels investigated display water uptake increasing with degradation time because of increasing hydrophilicity. The mass loss amounts up to 15% after eight weeks of degradation. The mechanical properties of the hydrogels are within the range of those of natural tissue, the E modulus is 18 MPa, or even 100–200 MPa, depending on the structure of material. The mechanical characteristic and their dependence degradation show the most recognizable correlation with the chemical structure. Studies of the topography of degraded samples (scanning electron microscopy) and IR measurements demonstrate the degradation to occur at slow rate due to the high degree of grafting. The mass loss is rather low and a bulk degradation mechanism takes place. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
14.
The relationships between the properties and structure are discussed for poly(vinyl alcohol)(PVA)/silica composites prepared through the sol‐gel process. The composites became stiff and brittle with increasing the silica content. The properties of the composites were changed drastically at around the composition of PVA/silica = 70/30 wt %. For example, there was no large change in the Young's modulus above 30 wt % of silica content (Pure PVA: 31.8 MPa, silica 30%: 52.6 MPa, silica 50%: 55.2 MPa). Consequently, it was considered that the three‐dimensional network structure of silica could be formed in the composite with more than 30 wt % of silica in PVA. From this behavior, it could be considered that the crystal growth of PVA was remarkably inhibited by silica network. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 133–138, 1999 相似文献
15.
The freeze‐casting technique has been used for a variety of materials to tailor their pore structure. The growing ice crystals act as a template for the subsequent voids present in the body. While it is mostly used for inorganic oxide materials, the method is also applicable to polymers like poly(vinyl alcohol) (PVA). The synthesized materials have an aligned anisotropic pore structure which significantly influences the mechanical behavior and the thermal conductivity. Glutaraldehyde (GA) can be used as a cross‐linking agent to reduce the water solubility of the PVA samples. The composition‐dependent thermal conductivities are measured, and found to be 0.055–0.078 W m?1 K?1 parallel to the freezing direction and 0.048–0.058 W m?1 K?1 in the transverse direction. The scaffold‐like structure resembling the hydroxyapatite structures in bones yields high strength values in the axial direction well exceeding that of common unsupported building insulation materials. 相似文献
16.
The working mechanism of poly(vinyl alcohol) (PVA, Mw ~ 200,000 g mol?1), a fluid loss control additive (FLA) applied in oil well cementing, was investigated. First, characteristic properties of PVA such as solubility and particle size in cold and hot water, minimum film forming temperature, adsorption on cement, viscosity of cement pore solution and static filtration properties of cement slurries treated with PVA were determined. It was found that the working mechanism of PVA relies on hydrated, but water‐insoluble PVA particles (d50 ~ 2.4 μm). During cement slurry filtration, they coalesce into a polymer film. This film effectively plugs the pores of the cement filter cake. The sample studied here becomes water‐soluble at temperatures > 40°C (d50 decreases to ~50 nm) and looses its effectiveness. Addition of highly anionic dispersants such as ß‐naphthalenesulfonate formaldehyde (BNS) or acetone formaldehyde sulfite (AFS) polycondensate extends the temperature range at which PVA works from 40°C to ~60°C. This effect is ascribed to lower solubility of PVA in the presence of these dispersants. The study reveals that decreased performance of PVA caused by higher temperatures is not the result of thermal degradation of the polymer, but is owed to its increasing water‐solubility. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 相似文献
17.
Zhi‐Xuan Zhou Xiu‐Li Wang Yu‐Zhong Wang Ke‐Ke Yang Si‐Chong Chen Gang Wu Jun Li 《Polymer International》2006,55(4):383-390
Blends of two biodegradable semicrystalline polymers, poly(p‐dioxanone) (PPDO) and poly(vinyl alcohol) (PVA) were prepared with different compositions. The thermal stability, phase morphology and thermal behavior of the blends were studied by using thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). From the TGA data, it can be seen that the addition of PVA improves the thermal stability of PPDO. DSC analysis showed that the glass transition temperature (Tg) and the melting temperature (Tm) of PPDO in the blends were nearly constant and equal to the values for neat PPDO, thus suggesting that PPDO and PVA are immiscible. It was found from the SEM images that the blends were phase‐separated, which was consistent with the DSC results. Additionally, non‐isothermal crystallization under controlled cooling rates was explored, and the Ozawa theory was employed to describe the non‐isothermal crystallization kinetics. Copyright © 2006 Society of Chemical Industry 相似文献
18.
Fui‐Ling Wong Azila Abdul‐Aziz 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2008,83(1):41-46
BACKGROUND: The performances of four types of glucose oxidase (GOD) immobilization materials based on poly(vinyl alcohol) (PVA) were compared. The matrices of interest were chemically‐linked PVA, freeze‐thawed PVA cryogel, tetramethoxysilane (TMOS) sol‐gel‐PVA hybrid material, and alumina sol‐gel‐PVA hybrid material. RESULTS: Overall, the membranes showed good sensitivity except for the chemically cross‐linked PVA. However, the main differences with the enzyme immobilization methods were enzyme leakage and values of Kmapp. CONCLUSION: Freeze‐thawed PVA‐GOD membranes and TMOS‐PVA, which showed satisfactory sensitivity and adequate value of Kmapp, were quite promising as support materials for immobilizing GOD. Copyright © 2007 Society of Chemical Industry 相似文献
19.
Poly(vinyl alcohol) (PVA) nanocapsules were fabricated by the deposition of PVA multilayer films onto the surface of silica particles followed by the removal of the silica cores. When a water dispersion of PVA nanocapsules was dried on a substrate, PVA nanotubes were formed through the one-dimensional fusion of the nanocapsules. This fusion behavior of the PVA nanocapsules was strongly affected by the molecular weights and acetylation degrees of PVA, the capsule film thickness of the PVA nanocapsules and the temperature to dry a water dispersion of the nanocapsules. When nanocapsules composed of 20 layered films of acetylated PVA with a 14% acetylation degree were used, nanotube formation via the fusion of these nanocapsules occurred effectively upon drying the water dispersion at 20 °C. 相似文献
20.
Rosalva S. Marques Tatiana C. O. Mac Leod Inez Valéria Pagotto Yoshida Valdir Mano Marilda D. Assis Marco A. Schiavon 《应用聚合物科学杂志》2010,115(1):158-166
Semi‐interpenetrating networks (Semi‐IPNs) with different compositions were prepared from poly(dimethylsiloxane) (PDMS), tetraethylorthosilicate (TEOS), and poly(vinyl alcohol) (PVA) by the sol‐gel process in this study. The characterization of the PDMS/PVA semi‐IPN was carried out using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and swelling measurements. The presence of PVA domains dispersed in the PDMS network disrupted the network and allowed PDMS to crystallize, as observed by the crystallization and melting peaks in the DSC analyses. Because of the presence of hydrophilic (? OH) and hydrophobic (Si? (CH3)2) domains, there was an appropriate hydrophylic/hydrophobic balance in the semi‐IPNs prepared, which led to a maximum equilibrium water content of ~ 14 wt % without a loss in the ability to swell less polar solvents. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 相似文献