基片位置对MWPCVD制备金刚石薄膜的影响

在石英钟罩式微波等离子体化学气相沉积实验装置中研究了基片位置对金刚石薄膜沉积质量的影响。扫描电子显微镜显微形貌观察和激光喇曼谱分析表明，对微波等离子体化学气相沉积制备金刚石薄膜而言，基片位置处于近等离子体球下游区域将有利于改善金刚石薄膜沉积质量。     

甲烷浓度对金刚石薄膜质量的影响

纳米金刚石薄膜具有优异的性能,已在多个领域获得广泛应用.但微波等离子体化学气相沉积制备的金刚石薄膜质量却严重受沉积工艺的影响,为了深入了解沉积工艺对制备的金刚石薄膜质量的影响,本文详细研究了甲烷浓度对微波等离子体化学气相沉积( MPCVD)金刚石薄膜质量的影响,利用扫描电镜、X射线衍射、拉曼光谱以及原子力显微镜对其进行...     

基片预处理对MWPCVD金刚石薄膜的影响

利用自行研制的石英钟罩式微波等离子体化学气相沉积金刚石薄膜装置，研究了硅基片的不同预处理方式对沉积结果的影响。通过扫描电子显微镜形貌观察和喇曼谱分析表明，基片预处理能提高形核密度；用于预处理的金刚石研磨膏的粒度不同，影响金刚石薄膜沉积时的形核密度、晶形和薄膜的质量；表面划痕对沉积金刚石薄膜的影响具有双重性。     

基片预处理对MWPCVD金刚石薄膜的影响

利用自行研制的石英钟罩式微波等离子体化学气相沉积金刚石薄膜装置，研究了硅基片的不同预处理方式对沉积结果的影响。通过扫描电子显微镜形貌观察和喇曼谱分析表明，基片预处理能提高形核密度；用于预处理的金刚石研磨膏的粒度不同，影响金刚石薄膜沉积时的形核密度，晶形和薄膜的质量；表面划痕对沉积金刚石薄膜的影响具有双重性。     

微波等离子体合成类金刚石（DLC）膜的研究

本文对用微波等离子体化学气相沉积方法，以甲烷和氢气的混合气体为原材，在硅或石英玻璃基片上合成类金刚石薄膜进行了研究，并对微波放电合成类金刚石膜的条件进行了考察和探讨。     

MPCVD法在氧化铝陶瓷上的金刚石膜沉积及其成核分析

用微波等离子体化学气相沉积（ＭＰＣＶＤ）法在氧化铝陶瓷基片上沉积了金刚石薄膜。实验表明，对基片进行适当的预处理，包括用金刚石研磨膏仔细研磨和沉积前原位沉积一层无定形碳层，可显著提高成核密度；对硅衬底和氧化铝基片上金刚石膜的成核过程进行了对比分析，并提出了提高氧化铝基片上沉积金刚石的成核的措施。     

低温沉积金刚石薄膜的研究

利用微波等离子体化学气相沉积法,以甲烷、氢气和氩气作为工作气体,在较低的沉积温度下,沉积得到了连续的金刚石薄膜。利用扫描电子显微镜、X射线衍射仪、拉曼光谱仪分别对金刚石薄膜的表面形貌、生长结构以及沉积质量进行了表征。实验结果表明,氩气的引入虽然可以有效的降低获得金刚石薄膜所需的基片温度,但为了提高金刚石薄膜的质量,需要适当的提高微波功率。同时,当基片温度一定时,在CH4/H2/Ar体系和CH4/H2体系下均可获得表面形貌与生长结构相似的金刚石薄膜,且可能利用CH4/H2/Ar作为工作气体沉积金刚石薄膜所需要的微波功率更低。     

新型微波等离子体化学气相沉积金刚石薄膜装置

微波等离子体化学气相沉积（ＭＰＣＶＤ）是制备金刚石薄膜的一种重要方法。为了获得金刚石薄膜的高速率大面积沉积，在国内首次研制成功了５ｋＷ带有石英真空窗的天线耦合水冷却不锈钢反应室式ＭＰＣＶＤ装置。初步用该装置成功在硅基片上沉积得到了金刚石薄膜。     

微波等离子体化学气相沉积技术制备金刚石薄膜的研究

介绍了微波等离子体化学气相沉积法（MPCVD）制备金刚石薄膜的研究情况，重点论述了该法的制备工艺对金刚石薄膜质量的影响及其制备金刚石薄膜的应用前景。     

WC-Co硬质合金表面MW-PCVD制备金刚石薄膜去钴预处理的研究

研究了ＷＣ－Ｃｏ硬质合金刀具表面微波等离子体化学气相沉积（ＭＷ－ＰＣＶＤ）制备金刚石薄膜时不同的去钴预处理方式的影响。扫描电子显微镜形貌观察和喇曼谱分析表明，利用氢－氧等离子体处理方式有显著的去钴效果，相应沉积获得的金刚石薄膜质量相对较高。与酸腐蚀处理相比，微波等离子体化学气相沉积装置中实现氢－氧等离子体处理方式具有独特的优越性。     

水冷反应室式MWPCVD制备金刚石膜装置研制

微波等离子体化学气相沉积(MWPCVD)是制备金刚石膜的一种重要方法.为了获得金刚石膜的高速率大面积沉积,研制成功了水冷反应室式MWPCVD制备金刚石膜的装置.装置在微波输入功率为3.0 kW时能长时间稳定运行,并在硅衬底上沉积出金刚石膜.     

Growth of polycrystalline and nanocrystalline diamond films on pure titanium by microwave plasma assisted CVD process

Well-faceted polycrystalline diamond (PCD) films were deposited along with nanocrystalline diamond (NCD) films on the pure titanium substrate by a microwave plasma assisted chemical vapor deposition (MWPCVD) system in the environment of CH₄ and H₂ gases at a moderate temperature. Diamond film deposition on pure titanium and Ti alloys is always extremely hard due to the high diffusion coefficient of carbon in Ti, the big mismatch in their thermal expansion coefficients, the complex nature of the interlayer formed during diamond deposition, and the difficulty of attaining very high nucleation density. A well-faceted PCD film and a smooth NCD film were successfully deposited on pure Ti substrate by using a simple two-step deposition technique. Both films adhered well. Detailed experimental results on the preparation, characterization and successful deposition of the diamond coatings on pure Ti are discussed. Lastly, it is shown that smooth NCD film can be deposited at moderate temperature with sufficient diamond quality for mechanical and tribological applications.     

氧气对MWPCVD制备金刚石膜的影响

在水冷反应室式微波等离子体化学气相沉积装置中以混合的CH4/H2/O2为反应气体,研究了O2浓度对制备金刚石膜的影响.实验发现,很低浓度的O2会显著促进金刚石的沉积,并稍稍抑制非晶C的沉积,因而沉积膜中非晶C的含量急剧下降;较高浓度的O2会同时抑制金刚石和非晶C的沉积,但由于抑制金刚石的作用更强烈,沉积膜中非晶C的含量反而有所升高.另外,O2的存在,有利于沉积颗粒较小的金刚石膜.     

MWPCVD制备金刚石膜装置的大功率稳定运行的研究

介绍了水冷反应室式MWPCVD制备金刚石膜装置的结构和工作原理,着重讨论了该装置长时间大功率稳定运行的措施。该装置在微波输入功率为3．0kW时能长时间稳定运行。用该装置成功地在硅衬底上沉积出金刚石膜。     

Two-step growth of high-quality nano-diamond films using CH4/H2 gas mixture

Diamond films with fine grain size and good quality were successfully deposited on pure titanium substrate using a novel two-step growth technique in microwave plasma-assisted chemical vapor deposition (MWPCVD) system. The films were grown with varying the methane (CH₄) concentration at the stage of bias-enhanced nucleation (BEN) and nano-diamond film deposition. It was found that nano-diamond nuclei were formed at a relatively high methane concentration, causing a secondary nucleation at the accompanying growth step. Nano-diamond film deposition on pure titanium was always very hard due to the high diffusion coefficient of carbon in Ti, the big difference between thermal expansion coefficients of diamond and Ti, the complex nature of the interlayer created during diamond deposition, and the difficulty in achieving very high nucleation density. A smooth and well-adhered nano-diamond film was successfully obtained on pure Ti substrate. Detailed experimental results on the synthesis, characterization and successful deposition of the nano-diamond film on pure Ti are discussed.     

反应气压对MWPCVD金刚石膜中 非金刚石相碳含量的影响

在水冷反应室式MWPCVD装置中以CH4和H2为反应气体进行了金刚石膜的沉积实验,研究了反应气体的压强对金刚石膜中非金刚石碳相含量的影响。实验发现,当微波输入功率较小时,随着反应气压的上升,沉积膜中非金刚石相碳的含量单调下降;当微波输入功率较大时,沉积膜中非金刚石相碳的含量先随着反应气压的上升而降低,后又随着反应气压的上升而稍稍增加。     

微波PCVD法大尺寸透明自支撑金刚石膜的制备及红外透过率

采用微波PCVD方法制备出直径50mm膜厚300um的大尺寸透明自支撑金刚石膜.在甲烷体积分数2%的条件下制备的透明自支撑金刚石膜经过两面抛光后在500cm-1-4000cm-1红外波段范同内红外透过率达到70%,但是其生长速率只有1um/h-2um/h.在体积分数4%甲烷浓度下制备的自支撑透明金刚石膜,其生长速率达到7um/h～8um/h,经过两面抛光之后膜厚为260um的金刚石膜的在500cm-1～4000cm-1红外波段范围内红外透过率达到60%左右,而且膜中心和边缘区的红外透过率基本相同.这些结果为大尺寸金刚石厚膜在红外窗口上的实际应用奠定了基础.     

Effect of Enhanced Plasma Density on the Properties of Aluminium Doped Zinc Oxide Thin Films Produced by DC Magnetron Sputtering

Aluminum doped zinc oxide (AZO) thin films were prepared by DC magnetron sputtering at low substrate temperature. A coaxial solenoid coil was placed near the magnetron target to enhance the plasma density (Ji). The enhanced plasma density improved significantly the bulk resistivity (ρ) and its homogeneity in spatial distribution of AZO films. X-ray diffraction (XRD) analysis revealed that the increased Ji had inuenced the crystallinity, stress relaxation and other material properties. The AZO films deposited in low plasma density (LPD) mode showed marked variation in ρ (ranging from ～6.5×10?2 to 1.9×10-3 ·cm), whereas those deposited in high plasma density (HPD) mode showed a better homogeneity of films resistivity (ranging from ～1.3×10?3 to 3.3×10?3 ?·cm) at di?erent substrate positions. The average visible transmittance in the wavelength range of 500-800 nm was over 80%, irrespective of the deposition conditions. The atomic force microscopy (AFM) surface morphology showed that AZO films deposited in HPD mode were smoother than that in LPD mode. The high plasma density produced by the coaxial solenoid coil improved the electrical property, surface morphology and the homogeneity in spatial distribution of AZO films deposited at low substrate temperature.     

Effect of spatial relationship between arc plasma and substrate on the properties of transparent conducting Ga-doped ZnO thin films prepared by vacuum arc plasma evaporation

The effect of the spatial relationship between the arc plasma flow and the substrate surface on the resulting film thickness and electrical properties is investigated in transparent conducting Ga-doped ZnO (GZO) thin films deposited by a vacuum arc plasma evaporation (VAPE) method. It was found that the resulting electrical properties of GZO thin films produced by a VAPE deposition on a fixed substrate were considerably dependent on both the film thickness and the location on the substrate surface, extending from the area nearest the arc plasma source to that at the opposite end of the substrate in a direction parallel to the arc plasma flow; with GZO thin films deposited with various thicknesses in the range from 20 to 200 nm, the films exhibited a thickness dependence of resistivity that was considerably affected by the location on the substrate surface. The variation of resistivity relative to the location on the substrate surface was related to that of carrier concentration, which is mainly attributed to the distribution of the amount of oxygen reaching the substrate surface. In GZO thin films deposited with a thickness of 30-40 nm at a substrate temperature of 250 °C, a resistivity as low as 4 × 10^− 4 Ω cm was obtained in the area of the substrate nearest the arc plasma source.     

Deposition of silicon films in presence of nitrogen plasma—A feasibility study

A design, development and validation work of plasma based ‘activated reactive evaporation (ARE) system’ is implemented for the deposition of the silicon films in presence of nitrogen plasma on substrate maintained at room temperature. This plasma based deposition system involves evaporation of pure silicon by e-beam gun in presence of nitrogen plasma, excited by inductively coupled RF source (13.56 MHz). The activated silicon reacts with the ionized nitrogen and the films get deposited on silicon substrate. Different physical and process related parameters are changed. The grown films are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and ellipsometry. The results indicate that the film contains silicon nitride and a phase of silicon oxy nitride deposited even at room temperature. This shows the feasibility of using the ARE technique for the deposition of silicon films in nitrogen plasma.