共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
3.
本文介绍了工模具钢激光热处理的应用研究现状,提出了工模具钢激光热处理的发展方向,并指出激光热处理技术在工模具上的应用具有广阔的发展前景。 相似文献
4.
模具钢激光表面热处理现状 总被引:6,自引:0,他引:6
激光表面热处理是70年代千瓦级大功率激光器出现以后发展起来的应用技术。激光表面热处理大致上可以分为两类,即表面不熔化的激光热处理和表面熔化的激光热处理。前者主要指激光淬火(即激光相变硬化)、激光退火、激光冲击硬化等;后者包括激光熔凝硬化(又称激光晶粒细化硬化)、激光上釉(又称激光非晶化)、激光合金化、激光涂覆等。激光熔凝硬化和上釉表面无化学成分变化,激光合金化和涂覆表面化学成分发生变化。 相似文献
5.
6.
本文综述了近期国内Ti-Ni及其合金的激光热处理研究现状,试验证明激光热处理可以改善Ti-Ni及其合金的耐磨性,抗蚀性,高温抗氧化性和热稳定性。 相似文献
7.
8.
9.
YG8硬质合金的激光热处理 总被引:2,自引:0,他引:2
测定了低钴硬质合金激光热处理前、后的机械性能变化,并对其合金的组织结构作了初步分析.结果表明,经过激光热处理后合金的抗弯强度、显微硬度均有提高。 相似文献
10.
气缸套激光热处理实验研究 总被引:3,自引:0,他引:3
采用YAG固体激光对发动机气缸套进行热处理,研究了离焦量、激光功率、扫描速度及表面处理对激光淬火硬度、淬硬深度及宽度的影响。试图找出激光热处理的最佳参数,供实际工作中参考。 相似文献
11.
Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions 总被引:2,自引:0,他引:2
Inconel 718 (IN718) is used in aerospace applications due to its superior mechanical properties. This study investigates the high-speed machinability of this material under laser-assisted machining (LAM) and dry conditions. Finish turning tests were performed for cutting speeds up 500 m/min and feeds up to 0.5 mm/rev, using focused Nd:YAG laser beam and ceramic tool (SiAlON). At optimum machining conditions, nearly eight-fold increase in material removal rate and significant improvement in the tool life and surface finish were achieved, compared to conventional machining. The mechanisms of tool failure were identified. SEM analysis and microstructure examination of machined surfaces revealed the improvement in the surface integrity under LAM conditions. 相似文献
12.
用激光相变硬化工艺处理了两批易变形工件,成品合格率为95%-100%。经激光处理后的工件用万能工具显微镜进行分析,建立起细长工件进行激光扫描后弯曲弯形的一种数学模型,并且探讨了工件沿轴向激光扫描后的变形趋势及其变化。 相似文献
13.
摩擦副表面的微细形貌深刻影响着摩擦副的摩擦学性能,因而人们利用各种加工方法对摩擦副进行表面处理以达到所需的摩擦学性能,激光表面造型技术以其诸多的优点而被认为是摩擦副表面处理的理想手段.首先阐述了激光表面造型技术的原理及其减磨机理.介绍了激光表面造型专用设备的基本组成及其控制原理,接着详细论述了激光表面造型技术在重要摩擦副处理中的应用及取得的效果,最后提出了激光表面造型技术的发展和应用前景. 相似文献
14.
利用激光表面强化技术对自动流量平衡阀过流端帽工作面进行强化以增加其使用寿命。详细分析了不同激光参数如脉冲电流、扫描速度、脉冲频率和离焦量等因素对过流端帽表面硬化的影响。实验结果表明:只要工艺参数选择适当,可获得很好的表面硬化质量,且能提高生产效率。 相似文献
15.
16.
镁合金激光表面处理技术的应用 总被引:2,自引:2,他引:0
激光加工技术是近几十年来迅速发展起来的一门高新技术.综述了激光表面改性技术在镁合金上的研究与应用.探讨了激光表面处理技术在镁合金中应用的发展趋势和广阔前景. 相似文献
17.
18.
Laser assisted turning of Titanium Metal Matrix Composite 总被引:2,自引:0,他引:2
Although ceramic particles in Titanium Metal Matrix Composites (TiMMCs) improve its wear resistance properties, they also cause high abrasive tool wear. In an attempt to enhance tool life and productivity, Laser Assisted Machining (LAM) of TiMMC was performed under different cutting conditions, an aspect that has never been investigated before. Analysis of the results showed that LAM can significantly increase tool life by up to 180%. The phenomenon of improved tool life at higher speeds and under LAM conditions were explained through the analysis of the chip morphology and micro-structure. 相似文献
19.
激光诱导沉积技术及其应用 总被引:3,自引:0,他引:3
介绍近年发展起来的激光诱导沉积技术,包括激光化学气相沉积、激光物理气相沉积、激光增强电镀和激光诱导化学镀等。概述这些工艺的原理、方法及其应用前景。 相似文献