Pore Propagation Directions in P+ Porous Silicon

A comparative study is presented on the pore propagation directions of porous silicon layers (PSL) formed on p⁺-type substrates of different orientations. PSLs were formed on plain (0 0 1) and (1 1 1) silicon wafers as well as on structured (0 0 1) wafers containing facets of various orientations. During anodization, regular pores follow the 0 0 1 direction on the (0 0 1) planes. While on the (1 1 1) planes fewer regular pores develop and seemingly propagate closely to the 1 1 1 direction. These results indicate that the pores propagate perpendicular to the surface i.e. along the field lines when the surface orientation is either (0 0 1) or (1 1 1).When the silicon surface provided (1 1 0) orientation (Chuang, Collins, and Smith, 1989), or its position is in between the (0 0 1) and (1 1 1) planes then the pores do not propagate perpendicular to the surface but along the 0 0 1 direction.All the phenomena exhibited might be explained by presuming that during formation, the pores propagate along the 1 0 0 directions, and that those 1 0 0 directions are preferred which are closely to the field lines. In PSLs formed on (0 0 1) surfaces the field lines and the 0 0 1 crystallographic direction are coincident. However, in the (1 1 1) oriented wafer where three equally probable 1 0 0 directions exist around the field lines, more irregular structure of PSLs will develop.     

Impact of Structural Factors on Unsteady Combustion Modes of Gasless Systems

Based on the twotemperature, twovelocity timedependent model of gasless combustion, taking into account structural transformations related to the force action of the gas filtering in the pores and vitrification and volume variation of the condensed phase during the chemical transformation, selfoscillatory combustion modes are studied. Structural transformations are shown to have a pronounced effect on the propagation pattern of combustion waves and can either stabilize or destabilize combustion. The major structural parameters appreciably affecting combustionwave stability are the initial porosity, particle size, and pressure.     

Factors governing the electrochemical synthesis of α-nickel (ii) hydroxide

The electrodeposition of -nickel hydroxide is promoted by the simultaneous chemical corrosion of the electrode by an acidic nitrate bath. Chemical corrosion results in the formation of a poorly ordered layered phase which is structurally similar to -nickel hydroxide and provides nucleation sites for the deposition of the latter. Therefore under conditions which enhance corrosion rates such as low current density (<1.3 mA cm–2), high temperature (60 C), high nickel nitrate concentration ( 1M) and the resultant low pH (1.7), -nickel hydroxide electrodeposition is observed, while -nickel hydroxide forms under other conditions. Further, -nickel hydroxide deposition is more facile on an iron electrode compared to nickel or platinum.     

Experimental Study of Ignition of a Gasoline–Air Mixture in a Constant‐Volume Combustion Chamber

The characteristics of flamekernel development in a premixed gasoline–air mixture in a cylindrical constantvolume combustion chamber are measured. The experiments are performed with an initial temperature of 393 K, pressure of 6 bar, and equivalence ratio = 0.8 with the use of various ignition systems and spark plugs. The schlieren pictures of the process are presented, and the measured results for flame velocity, heatrelease rate, and mass fraction of the burnt fuel are analyzed.     

Phase transitions and dimensional and morphological changes in an “Aluminum Hydroxide-Alumina” system under a shock-wave action

A method is proposed to study the sequence of phase transitions in powdered materials under a shock-wave action. It is shown that the aluminum hydroxide-alumina system has the following sequence of phase transformations under a shock-wave action: bayerite boehmite -Al₂O₃ -Al₂O₃. It is found that there are no transitional high-temperature modifications of alumina. A method is developed for obtaining a submicron alumina powder, which allows obtaining materials with a controlled phase composition, including a thermodynamically stable -modification of Al₂O₃. The specific features of the morphological structure and the phase and structural characteristics of powders after a shock-wave action are considered.Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 1, pp. 110–119, January–February, 2005.     

Location of Mn in MnAPO‐11: influence of synthesis from aqueous and non‐aqueous media

MnAPO11 samples were synthesized from aqueous (MnAPO11(A)) and ethylene glycol (MnAPO11(NA)) media. The crystallinity of the samples was more when the synthesis was carried out in ethylene glycol. Chemical and thermogravimetric analyses reveal greater incorporation of Mn in the framework of MnAPO11(NA) than in MnAPO11(A). At least five different types of Mn(II) species are detected in the samples by ESR. The studies suggest that Mn is more homogeneously distributed in MnAPO11(NA) than in MnAPO11(A).     

Surface of a Titanium Target After Interaction with Shaped‐Charge Jet Particles

Coatings containing WC_1-x and W₂C_1-x tungsten carbides were produced on titanium targets by a shapedcharge explosion. The experiment used conical liners with a cone angle of 30° manufactured from a mixture of fine powders of tungsten, graphite, and ammonium nitrate. A comparative quantitative xray analysis of the top and bottom layers of the coating was performed. For the phase WC_1-x in the bottom layer, the value of the cubic unit cell parameter falls outside the range known in the literature. Microhardness in different segments of the target was studied.     

Steady-state kinetics of the NO-CO reaction on Rh(111): extrapolation from 10−10 to 1 bar

Ultrahigh vacuum studies indicate that the mechanism of the NO-CO reaction on Rh(111) involves reversible adsorption of NO and CO, NO decomposition, nitrogen desorption, and a Langmuir-Hinshelwood reaction between CO and oxygen. Employing available experimental data for the rate constants of these steps, we have calculated the steady-state reaction kinetics in a wide range of pressures and temperatures. At relatively high pressures (P _NOP _CO0.01 bar), the results of simulations are in marginal agreement with the experimental data. Analyzing the difference between the theory and experiment makes it possible to understand the type of changes which might be introduced into the model in order to improve the agreement with the experiment.     

Continuous oxidation of benzyl alcohol in “supercritical” carbon dioxide

Supercritical (dense) carbon dioxide has been applied as solvent for the partial oxidation of benzyl alcohol with molecular oxygen in a fixed-bed reactor. High rate and good selectivity to benzaldehyde (93–97%) has been achieved with 0.5 wt% Pd/alumina or 0.5 wt% Pd/C, at around 100C and 100 bar, using only moderate excess of oxygen. The by-product benzoic acid has an autocatalytic effect on the hydration of benzaldehyde, and the subsequent oxidative dehydrogenation leads to benzoic acid, and benzyl benzoate by esterification. Promotion of Pd by Pb improves the selectivity. No catalyst deactivation or metal leaching has been observed. The method provides reasonable yields at much lower temperature than that applied in conventional gas phase oxidation, showing a potential for the synthesis of thermolabile, water-insoluble aromatic aldehydes.     

Synthesis of nanosized platinum cluster in cubic mesoporous material via a direct introduction method

Platinumclustercontaining cubic mesoporous material (PtMCM48) has been synthesized by direct introduction of chloroplatinic acid during the synthesis of MCM48. In addition, we have also studied the incipient wetness impregnation and ionexchange method to obtain the platinumcontaining cubic mesoporous material. The nature of the platinumMCM48 catalyst has been characterized by different techniques such as XRD, N₂ adsorption, TEM, XPS, and NMR. The catalyst obtained by direct introduction of platinum in the synthesis gel shows higher activity in the hydrogenation of benzene and toluene.     

Selective synthesis of ethylamine over β zeolite

Ethylamine is selectively produced in the amination of ethanol with ammonia over H zeolite.     

A miscibility study of ternary blends of polystyrene,tetramethylbisphenol-A polycarbonate,and poly(2,6-dimethyl-1,4-phenylene oxide)

Phase behaviorof ternary blends of polystyrene (PS), tetramethylbisphenol-A polycarbonate (TMPC), and poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) at two different temperatures (i.e., 210 and 300 °C, respectively) was studied by means of differential scanning calorimetry. Miscibility of the ternary blends at either temperature was found restricted to limited compositions, in agreement with simulated spinodal curves based on published values of interaction parameters. The limited ability of PS, which is separately miscible with TMPC and PPO at 210 °C, to act as a common solvent for the immiscible TMPC/PPO pair at this temperature was explained in terms of the disparity in PS/TMPC and PS/PPO pair interactions (i.e., the 'X effect).     

Electrosynthesis of 4,4′-dinitroazobenzene on PbO2 electrodes

Parameters which affect the electrosynthesis of 4,4-dinitroazobenzene from p-nitroaniline on platinum and PbO₂ electrodes were investigated and optimum conditions were determined. Maximum conversion efficiency for electrosynthesis was 95% with a pure -PbO₂ electrode. It was found that the electrocatalytic activity of a PbO₂ electrode depends upon its / ratio and its degree of crystallinity. The effects of the added base and water on the conversion efficiency were also elucidated.     

Catalytic Combustion of Model Carbon Particles (CPs) over Pt/β-SiC Catalyst

Platinum catalyst supported on a medium surface area -SiC was successfully used for the catalytic combustion of model carbon particles and compared to a catalyst supported on a low surface area -SiC. The -SiC-based catalyst showed no deactivation as a function of cycling tests while a strong deactivation was observed on the -SiC-based catalyst. This deactivation was attributed to the progressive encapsulation of the platinum particles by a layer of silica which built up during the combustion cycle. These results render possible the use of Pt/-SiC catalyst as a diesel carbon particle catalytic filter with continuous regeneration.     

Cobalt‐catalyzed amination of 1,3‐cyclohexanediol and 2,4‐pentanediol in supercritical ammonia

The onestep procedure of amination of bifunctional secondary alcohols to diamines has been investigated in a continuous fixedbed reactor. Application of supercritical NH₃ as a solvent and reactant suppressed catalyst deactivation and improved selectivities to amino alcohol intermediates, whereas selectivities to diamines remained poor (8–10%). The main reason for the low diamine selectivity of 1,3dihydroxy compounds is water elimination leading to undesired monofunctional products via ,unsaturated alcohol, ketone or amine intermediates. This side reaction does not occur with 1,4dihydroxy compounds which afford high aminol and diamine selectivities under similar conditions. Amination of secondary diols with ammonia was found to be faster, but less selective than that of the corresponding primary 1,3propanediol.     

Additional male mediterranean fruitfly (Ceratitis capitata wied.) Attractants from Angelica seed oil (Angelica archangelica L.)

Two sesquiterpene hydrocarbons, -copaene and -ylangene, were isolated from bioactive fractions of angelica seed oil and were shown by field bioassays to be attractive to the male Mediterranean fruit fly. Their relative attractiveness, compared with the(+)-and (–)--copaene enantiomers, are: (+)--copaene>angelica -copaene>angelica -ylangene>(–)--copaene. The enantiomer ratios for the two compounds are: -copaene, 61.4% (+), 38.6% (–); -ylangene, 91.9% (+), 8.1% (–).trans--Bergamotene was also isolated from the same fractions, but in sufficient quantity for bioassay [enantiomer ratio: 95.7% (+), 4.3% (–)].     

Ammonia synthesis over multi‐promoted iron catalysts obtained by high‐energy ball‐milling

The feasibility of producing ammonia synthesis catalysts from highenergy ballmilling of a simple mixture of the constituent oxides has been investigated. The effect of ballmilling the fused oxidic precursor of the industrial KM1 ammonia synthesis catalyst has also been studied. The results show that highenergy ballmilling offers some interesting possibilities for preparing novel catalytic materials. It is observed that ballmilling of the powder oxides mixture leads to formation of solid solutions and the catalytic activity is significantly higher than that of the starting material. Furthermore, ballmilling of fused oxidic KM1 precursor is seen to give rise to more homogeneous promoter distribution and slightly higher activity. The quite small activity increase observed in this case probably reflects the fact that the fusion process has already resulted in a close to optimal promoter distribution. The choice of atmosphere during ballmilling is also seen to offer possibilities for regulating the phase composition.     

Partial oxidation of methane to synthesis gas

Partial oxidation of methane to synthesis gas has been carried out over a number of transition metal catalysts under a range of conditions. It is found that the metals Ni, Ru, Rh, Pd, Ir and Pt, either supported on alumina or present in mixed metal oxide precursors, will bring the system to equilibrium. The yield of CO and H2 improves with increasing temperature in the range 650–1050 K, and decreases with increasing pressure between 1 and 20 atm. An excellent yield (92%) is obtained with a 421 N₂CH₄O₂ ratio at 1050 K and atmospheric pressure, with a space velocity of 4×10⁴ hour^–1.     

Investigation of sex pheromone components of female asian corn borer,Ostrinia furnacalis (Hübner) (Lepidoptera: Pyralidae) in Taiwan

(E)-12-Tetradecenyl acetate (E12–14OAc), (Z)-12-tetradecenyl acetate (Z12–143nOAc), and tetradecanyl acetate (14OAc) were extracted and identified as major chemical components from female tips of the Asian corn borer,Ostrinia furnacalis (Hübner) (Lepidoptera: Pyralidae) in Taiwan, with a combined wash ratio of 483715 and an individual female ratio of 453916. The average amount ofE12-,Z12–14OAc and 14OAc in each female gland was 6.6±4.6, 5.8±3.5, and 2.4±1.7 ng/female, respectively. The mixture of these three synthetic chemicals not only gave strong activities in male antennae but also could catch significantly more males than virgin females in field-trapping tests. The field test also showed no significant difference in trapping ability among the three-component Taiwan formulations, the two-component Taiwan formulation (Z12–14OAc andZ1214OAc, 5347), and the Japan formulation (Z12–14 OAc andE 12–14OAc, 3:2).     

Synthesis and properties of aromatic polyesters and brominated polyesters derived from α,α′-bis(4-hydroxyphenyl)-1,4(or 1,3)-diisopropylbenzene

The interfacial polycondensation technique was used for the preparation of polyarylates and brominated polyarylates. Polyarylates and brominated polyarylates were prepared by mixing a solution of diacid chloride such as terephthaloyl chloride, isophthaloyl chloride, or their mixture in dichloromethane with an aqueous alkaline solution of ,-bis(4-hydroxyphenyl)-1,4(or 1,3)-diisopropylbenzene or ,-bis(4-hydroxy-3,5-dibromophenyl)-1,4(or 1,3)-diisopropylbenzene using triethylbenzylammonium chloride as the phase transfer agent. Moderate to high molecular weight polyarylates with _inh up to 1.27 dL/g were obtained, and most of them could be cast into tough and flexible films depending on the polymer composition. In general, polymers containing more 1,3-isomer or isophthaloyl chloride moieties gave transparent and flexible films and had lower glass transition temperatures and higher solubility. Although these polymers have two isopropylidene linkages in their repeating units, they still exhibit moderately high thermal stability and show no obvious weight loss before 400 °C. The introduction of bromine on the polymer backbone caused a decrease of inherent viscosity, crystallinity, and thermal stability of the polyarylates, while causing an increase in glass transition temperature and a great enhancement of fire retardancy.