共查询到20条相似文献,搜索用时 234 毫秒
1.
2.
用动态接触电阻测量系统进行了电磁继电器失效检测试验,检测了其触点闭合过程的接触压降。试验发现闭合过程的触点接触压降为随时间复杂变化的衰减波形,经历了由动态的弹跳、微振动再到静态的过程。数据分析表明继电器接触失效与闭合过程的弹跳时间及接触电阻峰值有一定关系,可综合考虑弹跳时间-操作次数曲线及接触电阻峰值-操作次数曲线的变化规律对继电器触点进行失效预测。 相似文献
3.
用动态接触电阻测量系统进行了电磁继电器失效检测试验,检测了其触点闭合过程的接触压降.试验发现闭合过程的触点接触压降为随时间复杂变化的衰减波形,经历了由动态的弹跳、微振动再到静态的过程.数据分析表明继电器接触失效与闭合过程的弹跳时间及接触电阻峰值有一定关系,可综合考虑弹跳时间-操作次数曲线及接触电阻峰值-操作次数曲线的变化规律对继电器触点进行失效预测. 相似文献
4.
电磁继电器长期连续工作时,继电器触点表面特性的变化将直接影响到工作系统的可靠性与稳定性。该研究借助X射线衍射仪(XRD)分析银及银铈合金触点表面的组分,并利用扫描电子显微镜(SEM)观察其表面形貌,进而讨论了对继电器触点性质的影响因素。 相似文献
5.
6.
一种新型的电触点材料—铜基银—氧化镧复合镀电触点 总被引:1,自引:0,他引:1
一、引言 电触点是开关电器的执行机构,担负电能、讯号的转换、控制、输配、调节与传递,它的性能直接影响开关电器的可靠性、稳定性、精度及使用寿命,它是电器与电子装置中的关键性部件,又是其致命点,只要存在电器与电子装置,便不可避免地要使用电触点。电触点虽然外形尺寸简单,但是它工作中发生的一切现象却涉及到电学、物理学、金属学、化学等广泛领域。 相似文献
7.
一、前言 机械式开关(如继电器、微动开关、键盘按键等)在转换过程中,其触点系统都会出现回跳现象。这种回跳是很有害的,它可加速触点的磨损,并使触点弹性系统老化。在许多情况下,触点发生回跳时还会引起弧光放电。随着两触点的不断闭合和断开,放电强度会变得越来越大。每次严重的触点回跳,可以看成为近似一次触点转换动作过程。在感性和容性负载情况下,触点回跳的影响就更大。对于触点控制的外电路来说,回跳会影响外电路的工作特性,或使外电路产生误动作。 相似文献
8.
浙江正泰电器有限公司 《电气技术》2010,(4):95-96
随着中国工业的迅速发展,组合开关的品种规格日益增加,产品体积和操作行程越来越小,控制电流不断增大。为避免空气尘埃进入触点间影响触点的可靠导电,产品结构向全封闭发展,同时机械 相似文献
9.
10.
11.
12.
研制了CuW/Cu整体触头的加工工艺,同时探讨改善熔渗质量、消除熔渗气孔的方法,并对采用不同工艺制造CuW/Cu整体触头在性能和显微组织上作了对比分析。结果表明:采用氢气保护熔渗,并真空除气工艺研制的CuW/Cu整体触头密度达到理论密度的99%~100%,硬度、电阻率达到和超过国外相关标准规定的技术指标。在空气断路器、SF_6断路器上得到使用,能满足使用要求。 相似文献
13.
针对户外高压隔离开关在运行中常常出现电触头发热甚至烧熔的事故,依据材料特性及场强理论,对发热原因进行深层分析,得出触头材料电性变化和热场影响是发热加剧的根本机理,并为改善触头性能和加强在线监测提供参考,确保电网运行稳定和供电可靠. 相似文献
14.
15.
介绍了ASTM标准化组织的历史及所制订的ASTM标准的种类和影响力。详细列举了ASTMB02委员会下属的B02.05和B02.11分技术委员会制定的电接触领域相关标准,根据这些标准的具体内容和相关性,按照术语和分类、电接触材料、电接触材料性能要求与测试方法、电接触过程性能与测试方法、贵金属覆盖层质量评价方法、气体环境腐蚀试验对这些标准进行了分类,并简要介绍了这些标准的主要内容和相互关系。文章还就这些标准对电接触材料生产和电接触性能检测的指导意义进行了讨论。 相似文献
16.
The scaling-down of devices to the atomistic scale lets them operate close to their ballistic limit. At these dimensions the resistance of the entire system is dominated by the contacts. In this paper we describe a simulation tool by which the metal-nanotube heterostructure is modeled atomistically in its entirety, so that contact properties and the associated contact resistances can be explored for different contact materials. We show results for a self-consistently calculated current-voltage (I-V) for an armchair tube with its open ends contacted to gold-[111] surface. 相似文献
17.
Eiji Kaneko Mikimasa Iwata Toshiyuki Onchi Hiroki Kajino Takashi Sato Tadashi Mori 《IEEJ Transactions on Electrical and Electronic Engineering》2007,2(5):536-541
Arc plasma generated by arc discharges is used in various fields because of its extraordinary characteristics such as very high temperature and high energy density. On the other hand, the principle of current interruption by extinguishing the arc discharge between electrical contacts is practical and useful in many types of circuit breakers. Arc discharge and electrical contacts have been well investigated, and numerous procedures have been developed. In this review paper, we introduce the recent technical trends in arc plasma treating wastes, synthesizing new materials, and the latest circuit breakers equipped with arc plasma and electrical contact techniques. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. 相似文献
18.
针对目前电力系统高压开关弹操机构中弹簧储能触点(即DT触点)在开关电动合闸操作中易烧损的情况进行了分析研究,详细地阐述了弹操机构DT触点易烧损的原因:违背了分合闸回路电流必须由DL触点断弧的基本原则,造成DT触点断弧或首先断弧。提出了解决此问题的基本思路:通过DT触点开、闭合闸脉冲达到控制合闸的目的。以35kV微机保护的控制回路为例给出了二种情况下的解决方案。此方案已在实际中得到了运用,运行情况良好。 相似文献
19.
This paper describes the capacitive current interruption capability of circuit breakers from the viewpoint of flashover characteristics between the contacts of breakers. The authors obtained flashover characteristics between the contacts having a short gap between them by comparing the data for new contacts and the data for contacts eroded after having been exposed to three interruptions at T60 according to amended regulations JEC 2300 (1998) and IEC 62271‐100 (2001). Comparison of the flashover characteristics and the electric field calculations obtained by measurements using new and eroded contacts have shown that the deterioration of dielectric strength amounts to 10 to 20%. The authors also conducted flashover tests for the contacts and nozzle after a significant number of interruptions. The total number of interruptions can be considered as the maximum possible number of interruptions according to CIGRE research. The deterioration of dielectric characteristics is 10 to 30%. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(1): 28–37, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10281 相似文献
20.
通过对气隙的光学测量原理、光学图像测量仪器设计和使用介绍,提出了用内窥镜光学成像技术来测量增安型电机静态气隙的方法。 相似文献