Fe_2(MoO_4)_3/MoO_3纳米棒催化剂的制备及应用

通过水热法合成具有一维纳米结构的MoO_3纳米棒,利用MoO_3纳米棒的尺寸约束作用,以MoO_3纳米棒和铁盐为原料,采用浸渍法及高温焙烧下发生的固相反应,在经典Kirkendall效应影响下合成Fe_2(MoO_4)_3/MoO_3纳米棒催化剂。以空气氧化甲醇制甲醛为目标反应,评价其催化性能。结果表明,以Mo与Fe原子比2.2∶1制备的Fe_2(MoO_4)_3/MoO_3纳米棒催化剂催化性能较佳,甲醇转化率≥99.5%,甲醛选择性≥96.0%。     

Synthesis of high‐molecular weight poly(trimethylene terephthalate) catalyzed by MoO3 supported Al2O3‐TiO2 catalysts

Poly(trimethylene terephthalate) (PTT) is an excellent fiber materials. Although it was synthesized as early as 1940s, obtaining high‐molecular weight PTT suitable for spinning is not easy due to no evident breakthrough in the catalysts for PTT synthesis. Patents and literatures disclosed a lot of the catalysts of preparing PTT, but which are more or less disadvantageous. Based on acid catalytic mechanism of PTT preparation, a series of solid acid as x% MoO₃/(50% Al₂O₃ ? 50% TiO₂) (briefly written as xM/(A ? T), x = 0, 10, 15, 20 by weight) were prepared by sol–gel coprecipitation and wetting impregnation methods, and first used for PTT synthesis in this work. When 50% Al₂O₃ ? 50% TiO₂ (briefly written as A ? T) was supported by MoO₃ using wetting impregnation technique of (NH₄)₆Mo₇O₂₄.4H₂O aqueous solution, a lot of Brφnsted acid and Lewis acid sites were formed on xM/(A ? T) catalyst surfaces, which was confirmed by the characteristics of their NH₃‐TPD (temperature programmed desorption). All the prepared catalysts were highly active ones toward synthesis of PTT. PTT with high‐intrinsic viscosity (IV) was obtained in the presence of trace amount of the catalysts. IV ranging of the PTT synthesized from 0.66 to 0.95 dL g^?1 corresponds to weight average molecular weight from 49,197 to 73,004. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Kinetics of the catalysed decomposition of N2H by the ceramic superconductor YBa2Cu3O7–δ

This paper describes an extractive membrane bioreactor developed to extract and biodegrade toxic organic pollutants present in chemical industry wastewaters. The technology is applicable to wastewaters emanating in organic synthesis operations which are not treatable by conventional ‘direct’ biological treatment due to extremes of pH, high salt contents, or otherwise hostile organic compositions, and also to wastewaters that contain volatile organic compounds. A laboratory scale prototype demonstrating the technology has been operated continuously over periods of several months, using industrially produced wastewaters. No pre-conditioning or dilution of the wastewaters is necessary prior to treatment, which removes and destroys over 99% of the toxic organics present.     

Synthesis and characterization of polyimide‐γ‐Fe2O3 nanocomposites

Novel polyimide‐γ‐Fe₂O₃ hybrid nanocomposite films (PI/γ‐Fe₂O₃) has been developed from the poly(amic acid) salt of oxydianiline with different weight percentages (5, 10, 15 wt %) of γ‐Fe₂O₃ using tetrahydrofuran (THF) and N,N‐dimethylacetamide (DMAc) as aprotic solvents. The prepared polyimide‐γ‐Fe₂O₃ nanocomposite films were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), transmission electron micrograph (TEM), X‐ray diffraction (XRD), ¹³C‐NMR, and thermal analysis (TGA/DSC) techniques. These studies showed the homogenous dispersion of γ‐Fe₂O₃ in the polyimide matrix with an increase in the thermal stability of the composite films on γ‐Fe₂O₃ loadings. Magnetization measurements (magnetic hysteresis traces) have shown very high values of coercive force indicating their possible use in memory devices and in other related applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 834–840, 2007     

Preparation of γ‐Fe2O3 Catalysts and their deNOx Performance: Effects of Precipitation Conditions

Magnetic γ‐Fe₂O₃ catalysts were prepared by microwave‐assisted coprecipitation utilizing the direct‐titrate and back‐titrate precipitation technique with different precipitants, namely, (NH₄)₂CO₃, NaOH, Na₂CO₃, and NH₄OH, which were evaluated in the selective catalytic reduction of NO_x with NH₃. The optimum γ‐Fe₂O₃ catalyst preparation method was direct titration with NH₄OH as the precipitant, which exhibits high deNO_x efficiency. This direct titration was effective to maintain the proper crystallization degree of γ‐Fe₂O₃, improve the pore structure, and suppress the formation of α‐Fe₂O₃ phase, being advantageous to get tiny and uniform discrete γ‐Fe₂O₃ particles with high activity in selective catalytic reduction. NH₄⁺‐based precipitants in direct titration leads to an increase of the surface O/Fe atom ratio, and more lattice oxygen sites are exposed to the crystal surface.     

Partial oxidation of propylene MoO3/iron tellurite catalysts

The catalytic behaviour of the series Fe₂(TeO₃)₃ + × % MoO₃ (X = 0–30 mol. %) in the oxidation of propylene in the gaseous phase has been studied. It has been found that the addition of Mo0₃ to the iron tellurite activates the reaction towards the partial oxidation to acrolein. From the characterisation of solids it is possible to conclude that the addition of MoO₃ promotes the crystallinity of the iron tellurite. On the other hand, surface studies of the catalysts show that depending on the MoO₃ loading, this component is present in various states which contribute in different ways to the catalytic action. Some explanations for the observed behaviour are proposed.     

Flame Spray Synthesis of Nanoscale La0.6Sr0.4Co0.2Fe0.8O3–δ and Ba0.5Sr0.5Co0.8Fe0.2O3–δ as Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

Electrochemical performance and degradation was analysed by conductivity measurements as well as thermogravimetric analysis (TGA) under different atmospheres. CO₂ was identified as a critical parameter in terms of carbonate formation from Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–δ and causes a strong increase in the material resistivity, whereas La_0.6Sr_0.4Co_0.2Fe_0.8O_3–δ is unaffected. The oxygen exchange kinetic of both compositions is affected by CO₂ containing atmospheres.     

Structural elucidation and iron oxidation states in situ formed β‐Ca3(PO4)2/α‐Fe2O3 composites

A detailed structural analysis on the in situ synthesized β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is demonstrated. Compositional ratios, the influence and occupancy of iron at the β‐Ca₃(PO₄)₂ lattice, oxidation state of iron in the composites are derived from analytical techniques involving XRD, FT‐IR, Raman, refinement of the powder X‐ray diffraction and X‐ray photoelectron spectroscopy. Iron exists in the Fe³⁺ state throughout the investigated systems and favors its occupancy at the Ca²⁺(5) site of β‐Ca₃(PO₄)₂ until critical limit, and thereafter crystallizes as α‐Fe₂O₃ at ambient conditions. Fe³⁺ occupancy at the β‐Ca₃(PO₄)₂ lattice yields a Ca₉Fe(PO₄)₇ structure that is isostructural with its counterpart. A strong rise in the soft ferromagnetic behavior of β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is obvious that depends on the content of α‐Fe₂O₃ in the composites. Overall, the diverse level of iron inclusions at the calcium phosphate system with a Ca/P ratio of 1.5 yields a structurally stable β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites with assorted compositional ratios.     

Na2O-Al2O3-Fe2O3系烧结过程中铝、铁的反应行为

以Al2O3, Fe2O3和Na2CO3为原料,对Na2O-Al2O3-Fe2O3系烧结过程中的反应行为进行了详细研究. 基于溶出率与时间、温度的关系,证明Na2O×Al2O3和Na2O×Fe2O3的生成反应动力学都服从Zhuralev-Lesokin-Tempelman模型,表观活化能分别为186.59和80.92 kJ/mol,表明Na2O×Fe2O3比Na2O×Al2O3在动力学上更易形成;Al2O3易与Na2O×Fe2O3反应形成Na2O×Al2O3和Fe2O3,在1273 K烧结30 min,所得熟料Al2O3溶出率达98.51%;Fe2O3对Na2O×Al2O3的形成有双重作用,在1273 K下可加速Na2O×Al2O3的形成,超过1323 K,促使Na2O×Al2O3分解成Na2O和b-Al2O3,且随着温度升高或时间延长,分解程度增高,从而导致熟料中Al2O3溶出率显著降低.     

Fe2O3中空微球的制备与表征

以自制碳球为模板,FeCl3为原料,经水解、高温煅烧,制备出粒径约为250 nm的Fe2O3中空微球。用X-射线衍射（XRD）、透射电镜（TEM）等现代测试手段对Fe2O3中空微球样品的结构、形貌进行了表征;并考察了煅烧时间的变化对所制备的Fe2O3中空微球的晶型及形貌的影响。     

Methylcyclohexane dehydrogenation on Rh/γ-Al2O3 catalysts

The influence of the Rh loading on the surface properties and catalytic behaviour of Rh/γ-Al₂O₃ catalysts has been studied. The series of catalysts presents differences in metal dispersion, reducibility, surface composition and catalytic activity. All the data reported suggest that the differences in catalytic behaviour in the methylcyclohexane dehydrogenation reaction can be explained in terms of electron-deficient rhodium clusters, essentially when the metal particle size becomes smaller than 15 Å.     

Bio‐Based Hybrid Magnetic Latex Particles Containing Encapsulated γ ‐Fe2O3 by Miniemulsion Copolymerization of Soybean Oil‐Acrylated Methyl Ester and Styrene

This work reports the use of acrylated fatty acid methyl ester (AFAME) as a biomonomer for the synthesis of bio‐based hybrid magnetic particles poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ produced by miniemulsion polymerization. Poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ can be tailored for use in various fields by varying the content of AFAME. The strategy employed is to encapsulate superparamagnetic iron oxide nanoparticles (SPIONs) as γ‐Fe₂O₃ into a styrene/AFAME‐based copolymer matrix. Raman spectroscopy is employed to ensure the formation of the SPIONs (γ‐Fe₂O₃) obtained by a co‐precipitation technique followed by oxidation of Fe₃O₄. The functionalization of SPIONs with oleic acid (OA) is carried out to increase the SPIONs–monomer affinity. The presence of OA on the surface of γ‐Fe₂O₃ is certified by identification of main absorption bands by fourier‐transform infrared spectroscopy (FTIR). Thermal analysis (differential thermogravimetry/differential thermo analysis and differential scanning calorimetry) results of poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ show an increase in AFAME content leading to a lower copolymer glass transition temperature (T _g). Dynamic light scattering (DLS) measurements result in poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ particles with diameter in the range of 100–150 nm. It is also observed by transmission electron microscopy (TEM) and cryo‐TEM techniques that γ‐Fe₂O₃ particles are successfully encapsulated into the poly(styrene‐co‐AFAME) matrix.     

Competition between NO reduction and NO decomposition over reduced V–W–O catalysts

The SCR of NO and NO decomposition were investigated over a V–W–O/Ti(Sn)O₂ catalyst on a Cr–Al steel monolith. The conversions of NO and NH₃ over the reduced and oxidised catalysts were determined. The higher conversion of NO than of NH₃ was observed in SCR over the reduced catalyst and very close conversions of both substrates were found over the oxidised one. The increase of the pre-reduction temperature was found to cause an increase in catalyst activity and its stability in direct NO decomposition. The surface tungsten cations substituted for vanadium ones in vanadia-like active species are considered to be responsible for the direct NO decomposition. The results of DFT calculations for the 10-pyramidal clusters: V₁₀O₃₁H₁₂ (V–V) and V₉WO₃₁H₁₂ (V–W) modelling (0 0 1) surfaces of vanadia and WO₃–V₂O₅ solid solution (s.s.) active species, respectively, show that preferable conditions for NO adsorption exist on W sites of s.s. species and that reduction causes an increase in their ability for electron back donation to the adsorbed molecule. Electron back donation is believed to be responsible for the electron structure reorganisation in the adsorbed NO molecule resulting in its decomposition. The high selectivity of NO decomposition to dinitrogen was considered to be connected with the formation of the tungsten nitrosyl complexes solely via the W–N bond.     

MoO3／Al2O3催化剂上MoO3的脱附平衡和流失速度

分别测定了在氮，水气氛下ＭｏＯ３自ＭｏＯ３／Ａｌ２Ｏ３催化剂上脱附的平衡数据。发现尽管ＭｏＯ３和Ａｌ２Ｏ３存在着强的化学作用，但气固平衡关系仍然可用Ｆｒｅｕｎｄｌｉｃｈ方程式描述。讨论了钼升华流失速度方程式与Ｆｒｅｕｎｄｌｉｃｈ式的关系。发现在氮水混合气流中，钼的流失总速度可以用它们单独存在时流失速度线性加和来表示。给出了水分压对流失速度影响的级数值。这一综合速度方程式经简化后，可以用于工业过程中钼流失数据的估算。     

不同MoO_3质量分数MoO_3-ZrO_2的合成表征及正己烷异构化性能

水热法合成了不同Mo O_3质量分数的MoO_3-Zr O_2,利用N2吸附-脱附、X射线衍射、红外光谱和扫描电镜手段对MoO_3-Zr O_2进行分析。MoO_3-Zr O_2的正己烷异构化实验在固定床反应器上进行。结果表明:适量MoO_3的添加促进四方晶相ZrO_2的生成,使MoO_3-Zr O_2的比表面积增大。MoO_3-Zr O_2中含MoO_3质量分数为20%时,MoO_3在ZrO_2表面高度分散,其正己烷的转化率和异构产物的收率分别达到48.6%和34.1%。     

PVA/Fe2O3磁敏感性水凝胶的制备及性能

采用循环冷冻-解冻方法制备了聚乙烯醇(PVA)/Fe2O3磁敏感性水凝胶. 考察了水凝胶的力学性能、溶胀性能和磁敏感性,并用扫描电镜观察了其表面形貌. 结果表明,当Fe2O3含量为1%(w)时,水凝胶的力学性能最好;水凝胶的溶胀度和脱水率随时间增加有相似的变化趋势,都随磁性粒子含量升高而降低;溶胀性能降低其交联程度增加;PVA和Fe2O3相容性较好;水凝胶在3000 Oe的磁场强度下达到饱和,呈现出很强的顺磁性,磁滞损耗较多,表明具有较好的磁敏感性.