Radiation-grafted polymers for biomaterial applications. I. 2-hydroxyethyl methacrylate: Ethyl methacrylate grafting onto low density polyethylene films

Studies were conducted on the radiation grafting of 2-hydroxyethyl methacrylate (HEMA) and ethyl methacrylate (EMA) by the mutual irradiation technique onto low density polyethylene. Four different solution concentrations were used, and radiation doses ranged from 0.03 to 0.05 Mrad. Four copolymer compositions having different HEMA:EMA ratios were also studied using two total monomer concentrations. The kinetics of the grafting process demonstrated by the two monomers were basically different. While EMA showed a typical diffusion-controlled kinetic pattern, HEMA exhibited a more complex behavior, the main features of which were an induction period, a slight autoacceleration and a significant drop in graft level after a maximum is reached. The difference in behavior was interpreted in terms of partitioning of monomers into the polyethylene substrate. The surface topography of the grafted films was studied by means of scanning electron microscopy. A mechanism based on osmotic cell formation was suggested for the HEMA graft system. The copolymer systems investigated showed that the graft reaction is faster in the initial stages for higher percentages of EMA in the monomer mixtures; as grafting proceeds the trend is reversed.     

Radiation-grafted polymers for biomaterial applications. II. The morphology and structure of 2-hydroxyethyl methacrylate and ethyl methacrylate homopolymer grafts

The 2-hydroxyethyl methacrylate (HEMA)/ethyl methacrylate (EMA) graft copolymer system has been found to be a useful model for investigating blood/polymer interactions. Studies of the structure of both HEMA and EMA radiation-grafted regions were conducted using extraction methods and transmission electron microscopy of selectively stained HEMA grafts. The effect of the extraction procedure on the surface topography of HEMA- or EMA-grafted films was studied by means of scanning electron microscopy. The existence of internal cells in the bulk of the HEMA network was demonstrated, and their osmotic nature was investigated. As grafting proceeds, the HEMA network becomes increasingly porous. The extraction studies carried out on EMA grafted showed that with this system an increasingly dense structure is obtained as grafting proceeds.     

Photoinduced grafting of vinyl benzyl trimethyl ammonium chloride on polyester nonwoven fabric with surfactant coating and its anion‐exchange properties

Vinyl benzyl trimethyl ammonium chloride (VBTAC) could be efficiently and stably grafted onto polyester fiber coated with a surfactant polyester (PET) by a photoirradiation‐induced graft polymerization with benzophenone as the photoinitiator without any cografting monomer required. The degree of VBTAC grafting could be controlled simply by the irradiation time and concentration of VBTAC in the monomer solution. The anion‐exchange capacity (AEC) of the PET‐g‐VBTAC fabrics increased with increasing degree of grafting up to 80 ± 5% and then leveled off. The maximum AEC of PET‐g‐VBTAC was 2.2 mequiv/g; this was similar to that of a commercial anion‐exchange resin (2.16 ± 0.04 mequiv/g) and much higher than those of nylon‐g‐VBTAC–2‐hydroxyethyl methacrylate fabrics (≤1.0 mequiv/g) prepared with a conventional cografting system. The grafted fabric was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy studies, and the sorption selectivity for anions and regeneration efficiency were estimated. The results suggest that the grafting system, in which VBTAC alone was grafted onto PET fiber coated with surfactant, was more practical and effective for the preparation of the VBTAC‐containing anion exchanger, and the resulting PET‐g‐VBTAC fabrics could be used as an effective anion exchanger. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41674.     

Graft copolymerization of polyethylene glycol methacrylate onto polyethylene film and its blood compatibility

In an attempt to produce surfaces that show low levels of adsorption of protein and adhesion of platelets, different molecular weights of polyethylene glycol methacrylate (PEG‐MA) were grafted onto polyethylene film by a preirradiation grafting process. The extent of grafting was found to be dependent on the storage condition of the irradiated polyethylene film, the preirradiated dose, reaction time and temperature, molecular weight of PEG‐MA, and the type of solvent. The grafting yield was found to decrease rapidly with storage time for irradiated polyethylene film stored at room temperature. On the other hand, the grafting yield in the irradiated polyethylene stored at −130°C remained nearly constant up to 20 days after irradiation. The grafting yield decreased with an increased PEG‐MA molecular weight. Human plasma protein was adsorbed onto control and PEG‐MA‐grafted polyethylene film surfaces, and the relative adsorbed amount of proteins on the surfaces was evaluated by electron spectroscopy for chemical analysis. The adsorbed protein and platelet adhesion on the polyethylene film surface decreased rapidly with the grafting yield. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 631–641, 1999     

Autoadhesion of high density polyethylene (HDPE) to HDPE by ultraviolet grafting of methacrylates and acrylates

A study has been made on the effect of the presence of grafted acrylic layers on the autoadhesion of polyethylene. Methyl methacrylate (MMA), ethyl methacrylate (EMA), methyl acrylate (MA), ethyl acrylate (EA), and butyl methacrylate (BMA) were grafted onto high density polyethylene (HDPE). The grafting reaction was faster at higher temperature and methacrylates graft more easily than acrylates. For methacrylates and acrylates, the grafted amount increases with increasing length of the pendant alkyl chain. The grafting temperature is a crucial factor affecting the adhesion of grafted PE samples. For the samples grafted at lower temperature (in a room temperature water bath), the adhesion is very low (less than 50 N/m), even for very thick grafted layers. But for the samples grafted at higher temperature, much higher adhesion can be obtained. The presence of homopolymer was another factor affecting the adhesion of PE samples. When homopolymer is removed from the surface of the grafted sample, higher adhesion can be obtained. For some samples, the highest peel strength of more than 1000 N/m has been obtained. The low adhesion of the samples grafted at low temperature is attributed to the high branching of grafted chains.     

Surface graft copolymerization of 2‐hydroxyethyl methacrylate onto low‐density polyethylene film through corona discharge in air

The corona discharge technique was explored as a means of forming chemically active sites on a low‐density polyethylene (LDPE) film surface. The active species thus prepared at atmospheric pressure in air was exploited to subsequently induce copolymerization of 2‐hydroxyethyl methacrylate (HEMA) onto LDPE film in aqueous solution. The results showed that with the corona discharge voltage, reaction temperature, and inhibitor concentration in the reaction solution the grafting degree increased to a maximum and then decreased. As the corona discharge time, reaction time, and HEMA concentration in the reaction solution increased, the grafting degree increased. With reaction conditions of a 5 vol % HEMA concentration, 50°C copolymerization temperature, and a 2.0‐h reaction time, the degree of grafting of the LDPE film reached a high value of 158.0 μg/cm² after treatment for 72 s with a 15‐kV voltage at 50 Hz. Some characteristic peaks of the grafted LDPE came into view at 1719 cm^?1 on attenuated total reflectance IR spectra (C?O in ester groups) and at 531 eV on electron spectroscopy for chemical analysis (ESCA) spectra (O_1s). The C_1s core level ESCA spectrum of HEMA‐grafted LDPE showed two strong peaks at ～286.6 eV (? C ? O? from hydroxyl groups and ester groups) and ～289.1 eV (O?C ? O? from ester groups), and the C atom ratio in the ? C? O? groups and O?C? O groups was 2:1. The hydrophilicity of the grafted LDPE film was remarkably improved compared to that of the ungrafted LDPE film. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2881–2887, 2001     

AUTOADHESION OF HIGH DENSITY POLYETHYLENE (HDPE) TO HDPE BY ULTRAVIOLET GRAFTING OF METHACRYLATES AND ACRYLATES

A study has been made on the effect of the presence of grafted acrylic layers on the autoadhesion of polyethylene. Methyl methacrylate (MMA), ethyl methacrylate (EMA), methyl acrylate (MA), ethyl acrylate (EA), and butyl methacrylate (BMA) were grafted onto high density polyethylene (HDPE). The grafting reaction was faster at higher temperature and methacrylates graft more easily than acrylates. For methacrylates and acrylates, the grafted amount increases with increasing length of the pendant alkyl chain. The grafting temperature is a crucial factor affecting the adhesion of grafted PE samples. For the samples grafted at lower temperature (in a room temperature water bath), the adhesion is very low (less than 50 N/m), even for very thick grafted layers. But for the samples grafted at higher temperature, much higher adhesion can be obtained. The presence of homopolymer was another factor affecting the adhesion of PE samples. When homopolymer is removed from the surface of the grafted sample, higher adhesion can be obtained. For some samples, the highest peel strength of more than 1000 N/m has been obtained. The low adhesion of the samples grafted at low temperature is attributed to the high branching of grafted chains.     

Thermal behavior and the determination of the polymer-polymer interaction parameter of polycarbonate and a thermotropic liquid crystalline polymer blends

Summary The surface modification of low-density polyethylene(PE) by liquid phase photograft polymerization with acrylic acid(AA), acrylamide(AM) and glycidyl methacrylate(GMA) was described. The grafting of AA and AM was proved and characterized by electron spectroscopy for chemical analysis(ESCA). It was found that fully hydrophilic surface can be obtained in very short irradiation time. With ESCA and attenuated total reflection infrared spectroscopy(ATR-IR), it can be confirmed that bifunctional monomer GMA was grafted onto the PE film surface. Through further reaction with GMA grafted film, heparin and protamine were immobilized onto the grafted film surface.     

Study of the acid hydrolysis of the starch graft copolymers with hydroxylic methacrylates

The acid hydrolysis method is usually utilized to separate acrylic polymer chains grafted onto amylopectin (AMP). The hydrolysis with the HCl acid has been found to be appropriate when we grafted hydroxyethyl methacrylate (HEMA) and hydroxypropyl methacrylate (HPMA). Using the perchloric acid method, various secondary reactions appear falsifying the grafting yields. © 1993 John Wiley & Sons, Inc.     

Study on antithrombosis dialytic membrane prepared by preirradiation grafting

A new antithrombosis dialytic membrane with a hydrophilic–hydrophobic microphase structure was prepared by preirradiation grafting of β‐hydroxyethyl methacrylate (HEMA) and styrene (St) onto ethylene–vinyl acetate (EVA). The influence of some effects, such as preirradiation dose, dose rate, grafting reaction temperature, reaction time, and monomer component, on the degree of grafting was determined, and the properties of the grafted films were investigated. Compared with the conventional EVA‐grafted hydrophilic monomer, the EVA films grafted with HEMA and St have superior antithrombogenicity; the antithrombogenicity and permeability of EVA‐g‐(HEMA‐co‐St) were 30 and 20 times higher than those of the ungrafted films, respectively, when the volume ratio (HEMA versus St) was about 7:3. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1321–1327, 2000     

Synthesis of pH‐responsive polyethylene terephthalate track‐etched membranes by grafting hydroxyethyl‐methacrylate using atom‐transfer radical polymerization method

pH‐responsive polyethylene terephthalate (PET) track‐etched membranes were synthesized by grafting 2‐hydroxyethyl‐methacrylate (HEMA) on the surface of the membrane via atom transfer radical polymerization. The controllability of grafting polymerization of HEMA on membrane surface is systematically investigated. The pH‐responsive characteristics of PET‐g‐poly(2‐hydroxyethyl‐methacrylate) (PHEMA) gating membranes with different grafted PHEMA chain lengths are measured by tracking the permeation of water solution with different pH values. The results show that the grafting polymerization is controllable, and the permeation of grafted membranes is affected by the grafted PHEMA chain lengths on the surface of membrane. The results also demonstrate that the grafted PET membranes exhibit reversible pH‐response permeation to environmental pH values. Desired pH‐responsive membranes are obtained by controlling the grafted PHEMA chain lengths via atom transfer radical polymerization method. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40912.     

Study of multi‐monomer melt‐grafting onto polypropylene in an extruder

Free‐radical melt‐grafting of the dual‐monomer systems glycidyl methacrylate–styrene (GMA‐St) and hydroxyethyl methacrylate–styrene (HEMA‐St) onto polypropylene (PP) has been studied using a single‐screw extruder. For single monomer grafting systems, degradation of PP was unavoidable and deterioration of the mechanical properties of the grafted PP subsequently occurred because of β‐scission of PP chains during the free‐radical melt‐grafting process. However, for the dual‐monomer systems, it is shown that the addition of styrene as a comonomer can significantly enhance the GMA or HEMA grafting levels on PP and reduce the extent of β‐scission of PP backbone. It has been found that the grafting degree of dual‐monomer melt‐grafted PP, such as PP‐g‐(GMA‐co‐St) or PP‐g‐(HEMA‐co‐St), is about quadruple that of single‐monomer grafted PP for the same monomer and dicumyl peroxide concentrations. Moreover, the melt flow rate of the dual‐monomer grafted PP is smaller than that of the unmodified PP. Hence, PP not only was endowed with higher polarity, but also kept its good mechanical properties. © 2000 Society of Chemical Industry     

A few physical properties of grafted polyethylene and nylon films

Methyl methacrylate, vinyl acetate, or N-vinylpyrrolidone was graft-copolymerized onto low-density polyethylene or nylon 6 film by simultaneous irradiation method. Higher extent of grafting was attained by liquid-phase grafting than by vapor-phase grafting. The relative change in the degree of crystallinity of backbone polymer caused by grafting was measured with differential scanning calorimetry. In polyethylene-g-vinylpyrrolidone, the degree of crystallinity decreased markedly with the extent of grafting. However, in other grafted films, especially in grafted nylon, the crystallinity decrease was limited, or substantially no decrease was observed in a few systems. Water vapor permeability of the grafted films changed uniformly with increasing extent of grafting, and particularly polyethylene- and nylon-g-vinylpyrrolidone films showed excellent permeability, and some were able to be used as dialyzer. The difference in grafting method, liquid-phase grafting or vapor-phase grafting, produced no difference in those properties. The grafting was found to bring about a change in the molecular orientation of the original film.     

纤维素接枝甲基丙烯酸乙酯的合成及表征

在过氧化氢和亚铁离子组成的氧化还原体系中加入第三组分二氧化硫脲(TD),将单体甲基丙烯酸乙酯(EMA)接枝于纤维素纤维上。探讨了单体EMA用量、过氧化氢用量、TD用量、反应温度、反应时间、去离子水用量等因素对接枝率、接枝效率的影响。结果显示纤维素接枝EMA的最佳工艺条件为:纤维8 g,EMA 6 g,过氧化氢0.02 g,TD 0.5 g,去离子水150 mL,反应温度50℃,反应时间1 h。红外光谱、扫描电镜分析均表明EMA接枝到了纤维素结构上。     

Graft polymerization of vinyl monomers initiated by peroxycarbonate groups introduced onto silica surface by Michael addition

The introduction of peroxycarbonate groups onto a silica surface and the graft polymerization of vinyl monomers initiated by peroxycarbonate groups introduced onto a silica surface were investigated. The introduction of peroxycarbonate groups onto a silica surface was achieved by Michael addition of amino groups introduced onto the silica surface to t‐butylperoxy‐2‐methacryloyloxyethylcarbonate (HEPO). The amount of peroxycarbonate groups was determined to be 0.17 mmol/g. The graft polymerization of various vinyl monomers such as styrene (St), N‐vinyl‐2‐pyrrolidinone (NVPD), and 2‐hydroxyethyl methacrylate (HEMA) was initiated by peroxycarbonate groups introduced onto the silica surface to give the corresponding polymer‐grafted silicas. The percentage of poly(St)‐grafting reached about 120% after 5 h. This means that 1.20 g of poly(St) is grafted onto 1.0 g of silica. The surface of poly(St)‐grafted silica shows a hydrophobic nature, but the surfaces of poly(NVPD) and poly(HEMA)‐grafted silica show a hydrophilic nature. Furthermore, the poly(St)‐grafted silica was found to give a stable colloidal dispersion in a good solvent for the grafted polymer. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1491–1497, 1999     

Electrochemical properties of polyethylene membrane modified with sulfonic and phosphonic acid groups

Ion-exchange membranes modified with sulfonic (-SO₃H) and phosphonic acid (-PO₃H) groups were prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polyethylene (PE) films and sub-sequent sulfonation and phosphonation of poly(GMA) graft chains. The surface area, thickness and volume of grafted PE film increased with increasing grafting yield. The specific electrical resistance of PE membrane modified with the -PO₃H and -SO₃H groups decreased with increasing the ion-exchange capacity. The PE membrane modified with -PO₃H group had a lower specific electrical resistance than that of PE membrane modified with -SO₃H group.     

Grafting of glycidyl methacrylate onto high‐density polyethylene with reaction time in the batch mixer

The melt grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene (HDPE) in the presence of free radical initiators was investigated in the batch mixer. The graft content was determined with the titration and FTIR spectroscopy. The graft content increased with the increase of peroxide and initially introduced GMA concentration. Increase of the grafted GMA content resulted in decrease of the melt index. Interestingly, there was a sudden drop of GMA grafting content with the reaction time. It is assumed that depolymerization of GMA have taken place over the ceiling temperature. The crystallinity of the prepared glycidyl methacrylate grafted high density polyethylene (HDPE‐g‐GMA) was determined by the measurement of the heat of fusion. GMA grafted site acted as defect and crystallinity of the HDPE‐g‐GMA decreased with the increase of grafting reaction. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Radiation grafting of hydrophilic monomers onto poly(4-methylpentene-1), II. Grafting of long chain monomers and physical properties of the grafted films

Radiation grafting of 2-hydroxyethyl methacrylate (HEMA) and methoxytetraethyleneglycol methacrylate (M4G) on low crystallinity poly(4-methylpentene-1) (TPX) has been investigated. Grafting yield increased with increasing pre-irradiation dose, grafting temperature, and monomer concentration. Grafting rate depends on length of molecular chain in the monomers and decreases with increasing chain length. The grafting yields of electron beam irradiated samples were higher than those of γ-irradiated ones because of higher radical concentration. Tensile strength of the grafted film in the dried state increased and the elongation at break decreased with increasing degree of grafting. On the other hand, in the wet state, the tensile strength and elongation at break decreased with increasing the degree of grafting due to the lack of hydrogen bonds between the grafted chains caused by increased water absorption.     

Studies on graft copolymerization of 2-hydroxyethyl methacrylate onto poly(vinyl chloride)

Poly(vinyl chloride) was dehydrochlorinated in alkali solution and then grafted with 2-hydroxyethyl methacrylate (HEMA) using benzoyl peroxide as a free-radical initiator under a nitrogen atmosphere. The investigations involved examining the effects of grafting efficiency on various conditions, such as degree of dehydrochlorination, HEMA concentration, solvent effect, and reaction time. Maximum grafting to the extent of 57.2% was obtained. The mixed solvent grafting was attempted. © 1994 John Wiley & Sons, Inc.     

Atomic force microscopy study of the photografting of glycidyl methacrylate onto HDPE and the microstructure of the grafted chains

This article presents an atomic force microscopy (AFM) study of the initial stage of the photografting of glycidyl methacrylate (GMA) onto high-density polyethylene (HDPE) surface and the microstructure of the grafted chains. The grafting was carried out in acetone, dichloromethane and tetrahydrofuran (THF), as well as without solvent. Granular structures were found on the surface of the samples grafted in the solvents. The height of the granules increased linearly with their diameter. Each granule was thought to be a single grafted chain with a highly branched (or superbranched) microstructure. The grafting density on HDPE was quite small when the grafting was carried out in the solvents. The grafted chains were more branched when grafting was carried out in THF than when the grafting was carried out in acetone and dichloromethane. The bulk (no solvent) grafting of GMA onto HDPE was much faster and more uniform than that carried out in the solvents. The thickness of the bulk grafted materials was a few nanometers after 30 s irradiation, and possibly, the grafting density was much higher and the grafted polymers were much less branched than those produced in solvent.