The interaction of sulfenamide accelerators with sulfur,ZNO, and stearic acid in the absence of rubber

The interaction of sulfur, ZnO, stearic acid, and the three sulfenamide accelerators N-cyclohexylbenzothiazole sulfenamide (CBS), 2-(4-morpholinothio) benzothiazole (MOR), and 2-t-butylaminobenzothiazole sulfenamide (TBBS) were investigated by differential scanning calorimetry in the absence of rubber. In the presence of sulfur, the same product spectrum is formed as in its absence, but at lower temperatures. Thus, CBS gives N-cyclohexylamino-2-benzothiazole polysulfides (CBP), 2-bisbenzothiazole-2,2′-disulfide (MBTS), 2-bisbenzothiazole-2,2′-polysulfides (MBTP), and 2-bisbenzothiazole-2,2′-monosulfide (MBTP), 2-mercaptobenzothiazole (MBT), and 2-N-cyclohexylaminobenzothiazole (CB). In the presence of sulfur, the amount of polysulfides formed initially is higher but the polysulfides are unstable, and on prolonged heating, only MBT and CB remain. MOR and TBBS form analogous product spectra. The sulfenamides do not react with ZnO or zinc stearate. The MBT–amine complex prevents MBT, formed on decomposition, from reacting to give zinc mercaptobenzothiazole (ZHBT). Reaction mechanisms are proposed to account for the formation of the products. © 1994 John Wiley & Sons, Inc.     

Sulfur vulcanization of polyisoprene accelerated by benzothiazole derivatives. IV. The reaction of polyisoprene with N-cyclohexylbenzothiazole sulfenamide,sulfur, and zinc oxide

Polyisoprene was vulcanized with N-cyclohexylbenzothiazole sulfenamide (CBS), sulfur, and zinc oxide by heating in a Differential Scanning Calorimeter (DSC) at a programmed rate to given temperatures. The reaction was quenched and the product analyzed. Soluble curatives and reaction intermediates were analyzed by high-performance liquid chomatography (HPLC) and the crosslink density of the network determined by swelling. The delayed action of the CBS accelerator is explained in terms of an exchange reaction between benzothiazole terminated polysulfidic pendent groups on the polymer chain and CBS to yield unreactive amine terminated pendent groups and 2-bisbenzothiazole-2,2′-disulfide (MBTS). MBTS reacts with sulfur to form 2-bisbenzothiazole-2,2′-polysulfides (MBTPs), which also form pendent groups. Crosslinking does not commence until all of the CBS has been consumed and pendent groups are no longer deactivated. 2-Mercaptobenzothiazole (MBT) is released only on crosslinking. When MBT is present in the formulation at the outset of the reaction it traps cyclohexylamine released when CBS adds to the chain as a pendent group. The MBT-amine salt participates in a reaction that regenerates MBTS, which is, thus, not consumed in the vulcanization process. ZnO does not react with CBS, and its role in increasing the crosslink density is attributed to its promoting crosslinking reactions between pendent groups and neighboring chains rather than intramolecular reactions, which lead to cyclization. © 1996 John Wiley & Sons, Inc.     

Influence of sulfenamide accelerators on cure kinetics and properties of natural rubber foam

The effect of types of sulfenamide accelerator, i.e., 2‐morpholinothiobenzotiazole (MBS), N‐t‐butylbenzothiazole‐2‐sulfenamide (TBBS), and N‐cyclohexyl benzothiazole‐2‐sulfenamide (CBS) on the cure kinetics and properties of natural rubber foam was studied. It has been found that the natural rubber compound with CBS accelerator shows the fastest sulfur vulcanization rate and the lowest activation energy (E_a) because CBS accelerator produces higher level of basicity of amine species than other sulfenamide accelerators, further forming a complex structure with zinc ion as ligand in sulfur vulcanization. Because of the fastest cure rate of CBS accelerator, natural rubber foam with CBS accelerator shows the smallest bubble size and narrowest bubble size distribution. Moreover, it exhibits the lowest cell density, thermal conductivity and thermal expansion coefficient, as well as the highest compression set as a result of fast crosslink reaction. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44822.     

The reactions of 2‐(4‐morpholinothio)‐ and 2‐(4‐morpholinodithio) benzothiazole in the absence of polyisoprene

2‐(4‐morpholinothio)benzothiazole (MOR) and 2‐(4‐morpholinodithio)benzothiazole (MDB) were heated with sulfur and ZnO in a DSC. The products formed at various temperatures were identified and analyzed by HPLC. At temperatures below 200°C, decomposition of the accelerator in the absence of other curatives was slow, degradation products being mainly 2‐bisbenzothiazole‐2,2′‐disulfide (MBTS) and 2‐mercaptobenzothiazole (MBT). A rapid exothermic decomposition above 200°C resulted in the formation of MBT (or its amine salt) and 2‐(4‐morpholino)benzothiazole (MB). MOR and MDB reacted with sulfur to form higher polysulfides. MDB was shown to react more readily with sulfur than MOR and the delayed action of MOR in rubber can therefore not be ascribed to a stable polysulfide as suggested by other authors. Neither MOR nor MDB was found to react with ZnO. A limited reaction between MBT and ZnO was observed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1235–1240, 1999     

Improved mechanical properties of NR/EPDM blends by controlling the migration of curative and filler via reactive processing technique

Simple blending of natural rubber/ethylene–propylene–diene rubber (NR/EPDM) generally results in inferior mechanical properties because of curative migration and their differences for filler affinity. In this work, the 70/30 and 50/50 NR/EPDM blends prepared by reactive processing techniques were investigated and compared with the simple, nonreactive blends. The reactive blend compounds were prepared by preheating EPDM, containing all curatives to a predetermined time related to their scorch time prior to blending with NR. For the 70/30 gum blends, four types of accelerators were studied: 2,2‐mercaptobenzothiazole (MBT), 2,2‐dithiobis‐ (benzothiazole) (MBTS), N‐cyclohexyl‐2‐benzothiazolesulfenamide (CBS), and N‐tert‐butyl‐2‐benzothiazolesulfenamide (TBBS). When compared with the simple blends, the reactive blends cured with CBS and MBTS showed a clearly improved tensile strength whereas the increase of tensile strength in the blends cured with TBBS and MBT was marginal. However, a dramatic improvement of ultimate tensile properties in the reactive 50/50 NR/EPDM blends cured with TBBS was observed when compared with the simple blend. For the N‐550‐filled blends at the blend ratios of 70/30 and 50/50, the reactive‐filled blends prepared under the optimized preheating times demonstrated superior tensile strength and elongation at break over the simple blends. The improved crosslink and/or filler distribution between the two rubber phases in the reactive blends accounts for such improvement in their mechanical properties. This is shown in the scanning electron micrographs of the tensile fractured surfaces of the reactive blends, which indicate a more homogeneous blend. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Dual Activity of Some Modified Thiocarbamyl Sulfenamides in the Vulcanization of NR Accelerated by Dibenzothiazyl Disulfide

The retarding and the accelerating activities of some modified thiocarbamyl sulfenamides—namely, N-cyclopentamethylene thiocarbamyl-N′-(cyclohexyl, thiocyclohexyl) sulfenamide (CPCTS), N-cyclopenta-methylenethiocarbamyl-N′-(cyclohexyl, N-cyclopentamethylene thio) sulfenamide (CPCCS), and N-cyclopentamethylenethiocarbamyl-N′-(cyclohexyl, N-oxydiethylene thio) sulfenamide (CPCOS)—have been studied in dibenzothiazyl disulfide (MBTS)-accelerated vulcanization of natural rubber (NR). It is found that CPCTS, CPCOS, and CPCCS delay the onset of cure and generate active accelerators during vulcanization. In addition to this, the accelerator systems are quite capable of producing age-resistant vulcanizates. The results indicate that thiocarbamyl sulfenamides modified chemically at the >NH functionality retain their accelerating property. Thus CPCTS, CPCOS, and CPCCS play the dual role of an accelerator and a retarder in the vulcanization of NR accelerated by MBTS.     

Rate of formation of polysulfides of 2-bisbenzothiazole-2-2′-disulfide in the presence of sulfur and 2-mercaptobenzothiazole

2-Bisbenzothiazole-2,2′-disulfide was heated isothermally with and without sulfur at temperatures between 130 and 178°C for various periods of time and the mixture analyzed by high-pressure liquid chromatography (HPLC). 2-Bisbenzothiazole-2,2′-monosulfide formed rapidly and 2-bisbenzothiazole-2,2′-polysulfides after an induction period of about 5 min. Polysulfides of higher sulfur rank are formed by the sequential addition of sulfur atoms. 2-Mercaptobenzothiazole catalyzes the formation of 2-bisbenzothiazole-2,2′-polysulfides and elimates the induction period. Mechanisms for the decomposition of 2-bisbenzothiazole-2,2′-disulfide and the catalytic role of 2-mercaptobenzothiazole are proposed. © 1995 John Wiley & Sons, Inc.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.     

Studies on Cure Synergism. II,Effect of Diisopropyl Thiophosphoryl-N-Oxydiethylene Sulfenamide and Dibenzothiazyl Disulfide in the Vulcanization of NR

Thiazole sulfenamides as well as thiocarbamyl sulfenamides in the presence of dibenzothiazyl disulfide (MBTS) form synergistic combinations of rubber accelerators that provide technologically important rubber vulcanizates. The present investigation explores the feasibility of using thiophosphoryl sulfenamide with MBTS as a binary system of mutually activated accelerators in the vulcanization of rubber. The cure characteristics of the NR compound containing various proportions of diisopropyl thiophosphoryl-N-oxydiethylene sulfenamide (DIPTOS) and MBTS have been investigated keeping the total concentrations of the accelerators at 6 mmol per 100 rubber. The results indicated mutual activity of the mixed accelerators and significant enhancement of torque, modulus, and tensile strength of the resulting vulcanizates. The general character of the reaction of thiophosphoryl sulfenamide and MBTS has been established by replacing DIPTOS by diisopropylthiophosphoryl-N-cyclopentamethylene sulfenamide (DIPTCS), in the investigation. The mutual activity consequent upon the interaction of the accelerators can be demonstrated through isolation and identification of the reaction products formed in the early part of cure using the HPLC technique, which is also extremely helpful in explaining the cure behavior of the different stocks used in the investigation. The study reveals that diisopropylthiophosphoryl-2-benzothiazole disulfide (DIBDS), formed (in situ) as a result of interaction of DIPTOS and MBTS, plays an active part in improving the physical properties of NR vulcanizates. From the chemical analyses of the vulcanizates it is evident that the network structure obtained with the binary system of accelerators is highly rich in monosulfidic linkages that render the vulcanizates resistant to aging at 100°C.     

Studies on cure synergism. I. Effect of safe zinc dithiocarbamates on NR vulcanization accelerated by thiazole-based accelerators

Investigations have been carried out on the effect of several zinc dithiocarbamates in the presence of thiazole-based accelerators in the vulcanization of natural rubber (NR), keeping in mind the possibility of introducing safe dithiocarbamates derived from safe amines. Mutual activity is observed in all the binary systems studied, the highest being observed in the zinc dibenzyldithiocarbamate-dibenzothiazyldisulfide (ZBEC–MBTS)-accelerated system. The effect of zinc diisopropyl dithiophosphate, reportedly a safe rubber additive, which is recognized as an age-resistant agent for NR, on cure has also been studied. The study reveals that thiuram disulfide and MBT are always formed from the reaction either between zinc dithiocarbamate (ZDC) and MBTS or between ZDC and N-cyclohexyl-2-benzothiazole sulfenamide (CBS). It has been conclusively proved that 2-mercaptobenzothiazole (MBT) generated from MBTS or CBS reacts with ZDC and produces tetramethyl thinram disulfide (TMTD). The observed mutual activity has been discussed based on the cure and physical data and explained through the results based on HPLC and a reaction mechanism. © 1994 John Wiley & Sons, Inc.     

Properties of natural rubber composites reinforced with silica or carbon black: influence of cure accelerator content and filler dispersion

Filler dispersion is a critical factor in determining the properties of filled rubber composites. Silica has a high density of silanol groups on the surface, which lead to strong filler–filler interactions and a poor filler dispersions. A cure accelerator, N‐tert‐butyl‐2‐benzothiazole sulfenamide (TBBS), was found to improve filler dispersion in silica‐filled natural rubber (NR) compounds. For the silica‐filled NR compounds without the silane coupling agent, the reversion ratio generally increased with increase in TBBS content, whereas those of the silica‐filled NR compounds containing the silane coupling agent and carbon black‐filled NR compounds decreased linearly. The tensile strength of the silica‐filled NR vulcanizate without the silane coupling agent increased as the TBBS content increased, whereas carbon black‐filled samples did not show a specific trend. The experimental results were explained by TBBS adsorption on the silica surface and the improvement of silica dispersion with the aid of TBBS. Copyright © 2003 Society of Chemical Industry     

Push–pull bithiophene azo-chromophores bearing thiazole and benzothiazole acceptor moieties: Synthesis and evaluation of their redox and nonlinear optical properties

Three series of bithiophene azo dyes functionalized with thiazol-2-yl or benzothiazol-2-yl-diazene acceptor moieties were synthesized through azo coupling reaction using 2,2′-bithiophene, 5-alkoxy-2,2′-bithiophenes, 5-N,N-dialkylamino-2,2′-bithiophenes and thiazolyl- and benzothiazolyl diazonium salts as coupling components. The 5-alkoxy-2,2′-bithiophene precursors yielded the 5-thiazolylazo-5′-alkoxy-2,2′-bithiophenes, while the azo coupling reaction of 5-N,N-dialkylamino-2,2′-bithiophenes with the thiazolyl diazonium salt gave 4-thiazolyl-azo-5-N,N-dialkylamino-2,2′-bithiophenes. A different reactivity behavior was observed for 2,2-bithiophene with thiazolyl diazonium salts which gave rise to the expected azo dyes together with several arylation products. The redox behavior, thermal stability, and the first hyperpolarizability of the novel chromophores were evaluated through cyclic voltammetry, thermogravimetric analysis (TGA) and hyper-Rayleigh scattering (HRS) respectively. By varying the position of the thiazolyldiazene acceptor group on the bithiophene system, the electrochemical behavior as well as the optical (linear and nonlinear) properties of the donor–acceptor π-conjugated systems can readily be tuned. Push–pull 5-thiazolylazo-5′-alkoxy-2,2′-bithiophenes exhibit the most promising redox and the solvatochromic properties and second-order nonlinear optical response. The redox and the optical properties also show notable variations for the different heterocyclic spacers and were also sensitive to the electronic acceptor strength of the (benzo)thiazolyldiazene moieties.     

Dependence of Mooney scorch time of SMR L,ENR 25, and ENR 50 on concentration and types of antioxidants

The effect of concentration of antioxidants on the Mooney scorch time of two grades of epoxidized natural rubbers (ENR 25 and ENR 50) and one grade of natural rubber (SMR L) was studied using a Monsanto automatic Mooney viscometer (MV 2000). Three types of antioxidants, viz., 2,2′‐methylene‐bis(4‐methyl, 6‐tertbutylphenol) (AO 2246), N‐isopropyl‐N′‐phenyl‐p‐phenylenediamine (IPPD) and poly‐2,2,4‐trimethyl‐1,2‐dihydroquinoline (TMQ) were used, and the concentration range was varied from 0 to 5 phr. The conventional vulcanization system with 2‐mercaptobenzothiazole (MBT) as the accelerator was used throughout the study. Results show that increasing the phenol‐based antioxidant (AO 2246) concentration will increase the scorch time of ENR at a lower temperature of vulcanization while its effect on SMR L is not significant. This retardation effect is attributed to the “solvation” of epoxide group by the phenolic group in AO 2246, thus reducing the activation of adjacent double bond in ENR. The scorch time, however, is shortened by the amine‐based antioxidants (IPPD and TMQ) for the three rubbers studied, a phenomenon associated with the ability of the amine group to enhance the formation of more active sulfurating agent and subsequently increases the cure rate as the concentration of the amine‐based antioxidants is increased. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2940–2946, 1999     

橡胶促进剂NS的绿色合成工艺与应用研究进展

橡胶硫化促进剂按照化学结构可以分为醛胺类、秋兰姆类、硫脲类、二硫代氨基甲酸盐类、噻唑类、胍类、黄原酸盐类和次磺酰胺类等,其中次磺酰胺类促进剂具有抗烧焦时间长、硫化活性大、硫化平坦性高、力学性能优良等优点,应用最为广泛。促进剂NS（N-叔丁基-2-苯并噻唑次磺酰胺,TBBS）与其他次磺酰胺类促进剂相比,因在硫化过程中不产生致癌毒性物质亚硝胺,被誉为“标准促进剂”。本文回顾了以次氯酸钠为氧化剂合成促进剂NS的传统方法;综述了催化氧化法、氯气氧化法、电解氧化法和双氧水氧化法等绿色合成工艺;简要概述了微通道反应器在合成促进剂NS方面的工业应用。同时简介了促进剂NS在天然橡胶、丁苯橡胶、二氧化硅填充橡胶的改性剂以及合成氨基磷酸酯等领域的应用。     

Optimization of accelerators on curing characteristics,tensile, and dynamic mechanical properties of (natural rubber)/(recycled ethylene‐propylene‐diene‐monomer) blends

The migration of sulfur from natural rubber (NR) compound to the ground waste ethylene‐propylene‐diene monomer (EPDM) rubber phase may have caused the cure incompatibility between these two rubbers. Optimization of accelerators had been adopted to overcome the cure incompatibility in NR/(R‐EPDM) blends as well as to get increased curative distribution. In this study, blends of NR and R‐EPDM were prepared. The effect of accelerator type on curing characteristics, tensile properties, and dynamic mechanical properties of 70/30/NR/(R‐EPDM) blend was investigated. Four types of commercial accelerators were selected [ie, N‐tert‐butyl‐2‐benzothiazyl‐sulphonamide , N‐cyclohexyl‐benzothiazyl‐sulfenamide (CBS), tetramethylthiuram disulfide, and 2‐mercaptobenzothiazol]. It was found that the tensile strength of the blends cured in the presence of CBS was relatively higher than the other three accelerators. Scanning electron micrographs of CBS‐cured NR/(R‐EPDM) blends exhibited more roughness and cracking path, indicating that higher energy was required toward the fractured surface. The high crosslinking density observed from the swelling method could be verified from the storage modulus (E′) and damping factor (tan δ) where (tetramethylthiuram disulfide)‐cured NR/(R‐EPDM) blends provided a predominant degree of crosslinking followed by N‐tert‐butyl‐2‐benzothiazyl‐sulphonamide , CBS, and 2‐mercaptobenzothiazol, respectively. J. VINYL ADDIT. TECHNOL., 21:79–88, 2015. © 2014 Society of Plastics Engineers     

Retarding and antioxidant activity of 1-cyclohexylthio-2-mercaptobenzimidazole in the vulcanization of NR accelerated by thiocarbamyl sulfenamide

The effect of 1-cyclohexylthio-2-mercaptobenzimidazole (CMB) on the vulcanization of NR accelerated by N-oxydiethylene thiocarbamyl-N′-oxydiethylene sulfenamide (OTOS) has been studied. It is found that CMB delays the onset of cure and generates 2-mercaptobenzimidazole during vulcanization. The results indicate the retarding as well as antioxidant activity of CMB.     

Analysis of network structure formed in styrene–butadiene rubber cured with sulfur/TBBS system

Several styrene–butadiene rubber (SBR) compounds were prepared with different cure systems based on sulfur and TBBS (N‐t‐butyl‐2‐benzothiazole sulfenamide), varying the amount of sulfur and accelerator between 0.5 and 2.5 phr in the formulation. Torque curves, measured with a moving die rheometer at temperatures at 433 K, were used to characterize the vulcanization. The time to achieve the maximum torque, t_100%, was evaluated for each sample, and this time was set to vulcanize sheets at 433 K. The density and type of elastically active crosslinks of each cured sample were evaluated by means of swelling measurements and were related to the vulcanizing system. Finally, the rheometer data were analyzed considering the network structure formed during vulcanization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1105–1112, 2007     

Cure synergism in XNBR vulcanization in presence of thiophosphoryl disulfides and amine disulfide/thiazole accelerators

The study deals with the vulcanization of carboxylated nitrile butadiene rubber (XNBR) having synergistic combinations of accelerators comprising thiophosphoryl disulfide as one of the components. Other constituent accelerators employed in the present investigation are 2-mercaptobenzothiazole (MBT), 2-mercaptobenzothiazyl disulfide (MBTS), bis(N-oxydiethylene)disulfide (ODDS), N-oxydiethylene 2-benzothiazole sulfenamide (OBTS), etc. The binary combinations of thiophosphoryl disulfides with OBTS exhibited the highest mutual activity in the respective areas, so far as the physical properties are concerned. Structural characterization of different thiophosphoryl disulfide-accelerated XNBR vulcanizates, including those formed from the synergistic combinations with OBTS, were studied using a methyl iodide probe. It was found that the amount of sulfidic crosslinks arising from the reaction between  COOH groups of XNBR and thiophosphoryl disulfides, actually controls the network structure as wellas the physical properties of the vulcanizates. © 1996 John Wiley & Sons, Inc.     

Preparation of N-cyclohexylbenzothiazole-2-sulphenamide by oxidative condensation

It has been shown that in the preparation of N-cyclohexylbenzothiazole-2-sulphenamide by the reaction of 2-mercaptobenzothiazole with cyclohexylamine in the presence of sodium hypochlorite, N-cyclohexyl-benzothiazole-2-sulphonamide, sodium benzothiazole-2-sulphonate, benzothiazole-2-sulphonyl chloride, 2,2′-dithiobisbenzothiazole, and probably sodium benzothiazole-2-sulphinate can be formed as by-products, in amounts depending on pH, temperature and amount of amine used. Mechanisms are suggested for the reactions involved.     

The synthesis and characterization of heterocyclic azo dyes derived from 5-N,N-dialkylamino-2,2′-bithiophene couplers

Heterocyclic azo dyes were synthesized by diazotation of several substituted anilines and coupling with 5-N,N-dialkylamino-2,2′-bithiophenes to give 4-phenylazo-5-N,N-dialkylamino-2,2′-bithiophenes. This reaction contrasts with the behavior of 5-alkoxy-2,2′-bithiophenes towards aryldiazonium salts which provides 5-phenylazo-5-alkoxy-2,2′-bithiophenes. The thermal stability of the derivatives was evaluated using thermogravimetric analysis and their solvatochromic behaviour was investigated in several solvents of different polarity. The experimental results indicate that the heterocyclic azo dyes could be used as thermally stable, solvatochromic probes.