Morphological,mechanical, and physical properties of composites made with wood flour‐reinforced polypropylene/recycled poly(ethylene terephthalate) blends

Wood flour (WF)‐filled composites based on a polypropylene (PP)/recycled polyethylene terephthalate (r‐PET) matrix were prepared using two‐step extrusion. Maleic anhydride grafted polypropylene (MAPP) was added to improve the compatibility between polymer matrices and WF. The effects of filler and MAPP compatibilization on the water absorption, mechanical properties, and morphological features of PP/r‐PET/WF composites were investigated. The addition of MAPP significantly improved mechanical properties such as tensile strength, flexural strength, tensile modulus, and flexural modulus compared with uncompatibilized composites, but decreased elongation at break. Scanning electron microscopic images of fracture surface specimens revealed better interfacial interaction between WF and polymer matrix for MAPP‐compatibilized PP/r‐PET/WF composites. MAPP‐compatibilized PP/r‐PET/WF composites also showed reduced water absorption due to improved interfacial bonding, which limited the amount of absorbable water molecules. These results indicated that MAPP acts as an effective compatibilizer in PP/r‐PET/WF composites. POLYM. COMPOS., 38:1749–1755, 2017. © 2015 Society of Plastics Engineers     

Effect of filler content and size on the properties of ethylene vinyl acetate copolymer–wood fiber composites

In this study, the main focus was on the effect of wood fiber (WF) content and particle size on the morphology and mechanical, thermal, and water‐absorption properties of uncompatibilized and ethylene glycidyl methacrylate copolymer (EGMA) compatibilized ethylene vinyl acetate copolymer–WF composites. For uncompatibilized composites, the tensile strength decreased with increasing WF content, whereas for compatibilized composites, the tensile strength initially decreased, but it increased for composites containing more than 5% WF. Small‐WF‐particle‐containing composites had higher tensile strengths than composites containing larger WF particles, both in the presence and absence of EGMA. WF particle size did not seem to have much influence on the degradation behavior of the composites, whereas water absorption by the composites seemed to be higher in composites with smaller particle sizes for both compatibilized and uncompatibilized composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3645–3654, 2007     

Durability of Wood Flour-Thermoplastic Composites under Extreme Environmental Conditions and Fungal Exposure

Abstract

The main purpose of this research work was to investigate the response of wood flour reinforced polyethylene composites to 2 hours water boiling, five complete boiling and freezing cycles and fungal (Gloeophyllumm Traebum/Brown-rot fungus) exposure. Five composite formulations were manufactured and analyzed (0, 50, 60, 70 and copper carbonate treated 60% wood flour/polyethylene composites). The results showed that wood flour loading decreased the resistance of the composites to moisture and fungal environment. The exposure of the composites to 2 hours water boiling and five complete boiling and freezing cycles caused serious damage to the interfacial adhesion between wood flour and polyethylene matrix due to contraction and swelling stresses developed during cyclic exposure. The addition of 1 percent copper carbonate salt during compounding of wood flour and polyethylene prevented the colonization and proliferation of fungus on the surface of the composites, but had a negative effect on the water uptake and flexural properties of the composites.     

Effects of different filler types on decay resistance and thermal,physical, and mechanical properties of recycled high-density polyethylene composites

In this study, flexural properties, impact strength, thermal performance, water absorption, biological durability, and morphology of wood-plastic composites (WPCs) filled with different filler types were investigated. Six different formulations of WPCs were fabricated from mixtures of carpenter waste and recycled high-density polyethylene (R-HDPE). The carpenter waste was derived from wood and particle board wastes, and R-HDPE was used as the polymer matrix, with and without addition of maleic anhydrite grafted polyethylene (MAPE). All formulations were compression moulded in a hot press for 3 min at 170 °C. Investigations on the compression moulded specimens revealed that water absorption values in the particleboard waste flour specimens were lower than in the wood-waste flour WPCs. However, the wood-waste flour-filled composites exhibited higher mechanical property values than the particleboard waste flour WPCs. Statistically, only the wood-waste flour-filled composites with MAPE were significantly different. The use of MAPE (3 wt%) had a positive effect on the water absorption, crystallinity degree, and flexural properties of the WPCs. In addition, the peak temperatures of the composites did not show any variation, while thermal decomposition of the composites showed minor variations under the thermogravimetric analysis. Furthermore, the decay resistance of the composites improved with the use of particleboard waste flour. The obtained results demonstrate that particleboard waste flour, such as wood-waste flour, is potentially suitable as a raw material in WPCs.     

Rheological properties of teak wood flour reinforced HDPE and maize starch composites

Teak wood flour reinforced high density polyethylene and maize starch composites were prepared by using maleic anhydride grafted polyethylene as a compatibilizer. The mechanical properties (tensile and flexural) of all the composites increased after addition of 10%–40% teak wood flour into HDPE matrix. The complex viscosity (η*) was higher for all the composites at the low frequency, but decreased with increasing frequencies indicating a shear thinning behavior of the composites. The storage modulus and loss modulus increased for the composites compared to the HDPE at low frequencies. Damping factor peak of HDPE and composites showed high below 1 Hz, but the peak start decreasing with increasing above 1 Hz. The relaxation behavior of HDPE and the composites after incorporating teak wood flour, maize starch, and compatibilizer was obtained by Han plot. Biodegradability was enhanced with the incorporation of teak wood flour, maize starch into the composites. Appreciable water uptake and the thickness swelling for the composites indicating it's potential for interior, automobile and packaging applications.     

Mechanical,water absorption,and morphology of recycled polymer blend rice husk flour biocomposites

Rice husk flour (RHF) biocomposites based on uncompatibilized and compatibilized recycled high density polyethylene/recycled polyethylene terephthalate (rHDPE/rPET) with ethylene‐glycidyl methacrylate (E‐GMA) copolymer were prepared through a two‐step extrusion and hot pressing with fiber loadings of 40, 60, and 80 wt %. Results showed that tensile and flexural properties increased. However, the elongation to break and impact strength decreased as the RHF loading increased. Compatibilizing polymer blend matrices can further enhance the mechanical properties. Water absorption (WA) test were examined in distilled and seawater. It is interesting to note that for composites made from uncompatibilized matrix, the calculated D and K_SR were lower in seawater, but for the compatibilized matrix composites, the D and K_SR obtained were generally lower in distilled water. However, compatibilization of rHDPE/rPET has been markedly reduced the WA and thickness swelling. Scanning electron microscope analysis of the compatibilized matrix composites confirmed the improved interfacial bonding of matrix–matrix and filler–matrix phases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41494.     

Improvement in mechanical properties of grafted polylactic acid composite fibers via hot melt extrusion

The aim of this study was to develop fiber reinforced polylactic acid (PLA) composites via twin screw extrusion with the addition of a compatibilizer. Initial studies were performed to establish the optimum initiator percentage in terms of grafting efficiency between PLA and maleic anhydride (MA). Results show that PLA MA 7 obtained the highest level of grafting efficiency. Subsequent viscometric titration analysis on the compatibilized and uncompatibilized PLA composites showed an increase in the interfacial adhesion for the compatibilized PLA composites. Tensile and flexural properties also confirmed this increase in interfacial adhesion for the compatibilized composites, where the mechanical properties improved considerably, compared with virgin PLA and uncompatibilized composites. Results showed that the mechanical properties increase as PLA‐g‐MA loading increased. Finally, the rate of compostability of compatibilized composites decreased with the addition of PLA‐g‐MA. This was attributed to a lack of water absorption due to the bonding of hydroxyl groups on the fibers surface with MA. POLYM. COMPOS., 35:1792–1797, 2014. © 2014 Society of Plastics Engineers     

甲基化木粉与PE-g-MAH对木粉/HDPE复合材料力学性能的协同作用研究

主要研究了木粉表面甲基化改性和增容剂马来酸酐接枝聚乙烯(PE-g-MAH)对木粉/高密度聚乙烯(HDPE)复合材料力学性能的协同作用。木粉经表面甲基化处理后,与10%PE-g-MAH协同使用,甲基化木粉/PE-g-MAH/HDPE复合材料的拉伸强度、弯曲强度和冲击强度均明显高于未改性木粉/PE-g-MAH/HDPE复合材料,其原因在于在PE-g-MAH的作用下,甲基化木粉在聚合物基体中分布更加均匀,两者的界面作用力更高,即甲基化木粉和PE-g-MAH对提升木粉/HDPE复合材料的力学性能具有良好的协同作用。     

Long‐term water uptake behavior of lignocellulosic‐high density polyethylene composites

Composites of different lignocellulosic materials and high‐density polyethylene were prepared and their long‐term water absorption behaviors were studied. Wood flour, rice hulls, newsprint fibers, and kenaf fibers were mixed with the polymer at 25 and 50 wt % fiber contents and 1 and 2% compatibilizer, respectively. Water absorption tests were carried out on injection‐molded specimens at room temperature for five weeks. Results indicated a significant difference among different natural fibers with kenaf fibers and newsprint fibers exhibiting the highest and wood flour and rice hulls the lowest water absorption values, respectively. Very little difference was observed between kenaf fiber and newsprint composites and between rice hulls and wood flour composites regarding their water uptake behavior. The difference between 25 and 50% fiber contents for all composite formulations increased at longer immersion times, especially for the composites with higher water absorption. Kenaf fiber composites containing 50% kenaf fibers exhibited the highest water diffusion coefficient. A strong correlation was found between the water absorption and holocellulose content of the composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3907–3911, 2006     

PP-g-MAH增容改性木粉/PP复合材料的性能研究

以马来酸酐接枝聚丙烯 (PP-g-MAH) 为相容剂,聚丙烯 (PP) 为基体,通过熔融共混法制备了木粉/PP复合材料。研究了 PP-g-MAH 用量对复合材料力学性能及吸水性能的影响; 采用扫描电镜 (SEM) 观察了复合体系的冲击断面形貌。结果表明: 当 PP-g-MAH 的质量分数为 4%时,可以提高添加 35 份木粉复合材料体系的拉伸强度及弯曲强度,比未添加相容剂的分别提高了 49.4%和 16%,而缺口冲击强度仅下降了 9%。SEM 观察证实: PP-g-MAH 的加入有利于提高木粉与 PP 基体的界面相互作用。从吸水率来看,木粉/PP 复合材料的吸水率保持在 0.22% 以下,远低于纯木材。     

Effect of oxidized polypropylene as a new compatibilizer on the water absorption and mechanical properties of wood flour–polypropylene composites

The effect of oxidized polypropylene (OPP) as new compatibilizer on the water absorption and mechanical properties of wood flour–polypropylene (PP) composites were studied and compared with maleic anhydride grafted polypropylene (MAPP). The oxidation of PP was performed in the molten state in the presence of air. Wood flour, PP, and the compatibilizers (OPP and MAPP) were mixed in an internal mixer at temperature of 190°C. The amorphous composites removed from the mixer were then pressed into plates that had a nominal thickness of 2 mm and nominal dimensions of 15 × 15 cm² with a laboratory hydraulic hot press at 190°C. Physical and mechanical tests showed that the wood flour–PP composites with OPP exhibited higher flexural and impact properties but lower water absorption than MAPP. All of the composites with 2% compatibilizers (OPP and MAPP) gave higher flexural and impact properties and lower water absorption compared to those with 4% compatibilizers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synergistic compatibilization and reinforcement of HDPE/wood flour composites

Multi‐monomer grafted copolymers, high‐density polyethylene‐grafted‐maleic anhydride‐styrene (HDPE‐g‐(MAH‐St)) and polyethylene wax‐grafted‐ maleic anhydride ((PE wax)‐g‐MAH), were synthesized and applied to prepare high‐performance high‐density polyethylene (HDPE)/wood flour (WF) composites. Interfacial synergistic compatibilization was studied via the coordinated blending of high‐density polyethylene‐grafted‐maleic anhydride (MPE‐St) and polyethylene wax‐grafted‐ maleic anhydride (MPW) in the high‐density polyethylene (HDPE)/wood flour (WF) composites. Scanning electron microscopy (SEM) morphology and three‐dimensional WF sketch presented that strong interactive interface between HDPE and WF, formed by MPE‐St with high graft degree of maleic anhydride (MAH) together with the permeating effect of MPW with a low molecular weight. Experimental results demonstrated that HDPE/WF composites compatibilized by MPE‐St/MPW compounds showed significant improvement in mechanical properties, rheological properties, and water resistance than those compatibilized by MPE, MPE‐St or MPW separately and the uncompatibilized composites. The mass ratio of MPE‐St/MPW for optimizing the HDPE/WF composites was 5:1. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42958.     

乙烯-甲基丙烯酸共聚物增容PE-HD／木纤维复合材料的研究

以乙烯-甲基丙烯酸共聚物（EMAA）作为增容剂，采用木纤维对高密度聚乙烯（PE—HD）进行填充改性。研究了增容剂的相对分子质量、官能团含量以及木纤维用量对木塑复合材料性能的影响。结果表明，复合材料的拉伸强度、弯曲强度和弯曲模量随着木纤维用量的增加而大幅度提高，而冲击性能则明显降低；与未添加增容剂的复合材料相比，增容剂的加入进一步改善了木塑复合材料的弯曲和拉伸性能；当木纤维用量达到50％（质量含量，下同）时，复合材料的拉伸强度、弯曲强度和弯曲模量分别可达26gPa、40gPa和1807gPa。当EMAA酸值相同时，随着相对分子质量的增大，所制得复合材料的各项性能均提高。     

Effects of the accelerated freeze‐thaw cycling on physical and mechanical properties of wood flour‐recycled thermoplastic composites

This study investigated durability performance of wood‐plastic composites (WPCs) that were exposed to accelerated cycling of water immersion followed by freeze thaw (FT). The WPCs used in this study were made of high‐density polyethylene (HDPE) or polypropylene (PP) with radiata pine (Pinus radiata) wood flour using hot‐press molding. These two types of plastics included both recycled and virgin forms in the formulation. In the experiments, surface color, flexural properties, and dimensional stability properties (water absorption and thickness swelling) were measured for the FT cycled composites and the control samples. Interface microstructures and thermal properties of the composites were also investigated. The results show that the water absorption and the thickness swelling of the composites increased with the FT weathering. In the meantime, the flexural strength and stiffness decreased. Scanning electron microscopy (SEM) images of the fractured surfaces confirmed a loss of interface bonding between the wood flour and the polymer matrix. Differential scanning calorimetry (DSC) showed a decrease in crystallization enthalpy and crystallinity of the wood flour‐plastic composites as compared with the neat PP and HDPE samples. The crystallinity of the FT cycled composites using the virgin plastics (vPP and vHDPE) increased; however, the composites with the recycled plastics decreased in comparison with corresponding control samples. In general, the properties of the composites were degraded significantly after the accelerated FT cycling. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

木粉的碱化处理对木塑复合材料性能的影响

采用木粉填充高密度聚乙烯（HDPE）制备复合材料。为增强亲水性的木粉和憎水性的HDPE基质之间的化学亲和力,对木粉碱化处理。研究了相容剂用量和木粉的碱化处理对复合材料力学性能的影响。结果显示,马来酸酐接枝HDPE可明显提高复合材料的力学性能．表现出很好的增容效果：与用未碱化处理的木粉填充的复合材料相比,木粉的碱化处理使复合材料的弯曲强度和弯曲模量分别下降20．4％和36．2％：在不使用相容剂的情况下,木粉的碱化处理也会使复合材料的拉伸强度下降．但在使用适量相容剂后．则可使复合材料的拉伸强度从未处理时的30．3MPa提高到36．5MPa,与纯HDPE相比,拉伸强度提高了44.8％。     

Monofunctional compatibilizer with long alkyl end for fabrication of superior tensile wood flour‐polyolefin composites

A novel monofunctional compatibilizer (OID) was prepared and used as compatibilizer for fabrication of wood‐plastic composites. OID was successfully synthesized by esterification reaction of isophorone diisocyanate and octadecanol as confirmed by Fourier transform‐infrared spectra. After OID modification, the hydrophobicity of wood flour surface was enhanced as indicated by the increase of surface water contact angle. By using OID as compatibilizer, an obvious enhancement of the interfacial adhesion between wood flour and polyolefin was observed by scanning electron microscopy. As a result, the tensile properties of the obtained polypropylene/wood flour composites and polyethylene/wood flour composites were significantly enhanced. Besides, the processability of polyolefin/wood flour composites was also improved by adding OID. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44429.     

Improvement of the physico‐mechanical properties and stability of waste polypropylene in the presence of wood flour and (maleic anhydride)‐grafted polypropylene

This paper deals with (maleic anhydride)‐grafted polypropylene (MAH‐g‐PP) and wood flour reinforcement and their effects on the dynamic, mechanical, morphological, and rheological properties of waste polypropylene (PP) composites. MAH‐g‐PP was used as a compatibilizer to improve the physical interaction between the filler and matrix. The composites were prepared by using a twin‐screw extruder followed by injection molding. Thermal stability and mechanical properties of the compatibilized system increased as compared to their values for the uncompatibilized system. Also, nearly 60% and 30% loss was found for mechanical properties and weight loss, respectively, in a biodegradability study. J. VINYL ADDIT. TECHNOL., 20:24–30, 2014. © 2014 Society of Plastics Engineers     

Banana fiber reinforced low-density polyethylene composites: effect of chemical treatment and compatibilizer addition

In this study, an attempt has been made to utilize banana fiber (a natural fiber from agricultural waste) as reinforcement for low-density polyethylene (LDPE) to develop environmental friendly composite materials. LDPE/banana fiber composites were fabricated at different fiber loadings (10, 15, 20, 25, and 30 wt %) using compression molding technique. The composite with the composition of 25 wt % banana fiber was observed to be optimum on the basis of biodegradability and mechanical properties. Further, the effect of banana fiber surface treatment (alkali and acrylic acid) on the mechanical properties, morphology and water absorption behavior of the LDPE/banana fiber composites in the absence and presence of compatibilizer (maleic anhydride grafted LDPE, MA-g-LDPE) was comparatively studied. The alkali and acrylic acid treatment of the banana fibers led to enhanced mechanical properties and water resistance property of the composites, and these properties got further improved by the addition of the compatibilizer. The addition of compatibilizer to the acrylic acid treated banana fiber composites showed the most effective improvement in the flexural and impact strength and also, exhibited a reduction in the water absorption capacity. However, the tensile strength of the compatibilized composites with treated fibers resulted in slightly lower values than those with untreated fibers, because of the degradation of fibers by chemical attack as was evidenced by scanning electron microscopy (SEM) micrographs. SEM studies carried out on the tensile fractured surface of the specimens showed improved fiber-matrix interaction on the addition of compatibilizer.     

Further investigation of polyaminoamide‐epichlorohydrin/stearic anhydride compatibilizer system for wood‐polyethylene composites

The combination of a polyaminoamide‐epichlorohydrin (PAE) resin (a paper wet strength agent) and stearic anhydride was recently reported as an effective compatibilizer system for wood‐polyethylene composites. Further investigation of this new compatibilizer system revealed that the pH value of a PAE solution, dosages of PAE and stearic anhydride, and the weight ratio of PAE to stearic anhydride had significant impacts on the compatibilization effects of the compatibilizer system. Adjusting the pH value of the PAE solution from 5.0 to 10.4 increased the strength of the resulting wood‐polyethylene composites. The highest strength of the resulting wood‐polyethylene composites was obtained at 3 wt % PAE and 3 wt % stearic anhydride. At 4 wt % or 6 wt % of a compatibilizer, this PAE‐stearic anhydride system was superior to maleic anhydride‐grafted polyethylene (MAPE), one of the most effective compatibilizers, in terms of enhancing the strength of the resulting wood‐polyethylene composites. Fourier transform infrared spectroscopy (FTIR) analysis revealed that PAE and stearic anhydride formed covalent bonding with wood flour. The compatibilization mechanisms of this PAE‐stearic anhydride compatibilizer system were investigated in detail. Water‐resistance tests indicated that the PAE‐stearic anhydride compatibilizer system increased the water‐resistance of the resulting composites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 712–718, 2006     

Study of a compatibilized ultra-high-molecular-weight polyethylene and polyurethane blend

Ultra-high-molecular-weight polyethylene (UHMWPE) and thermoplastic polyester-type polyurethane (PU) were blended with polyethylene-grafted maleic anhydride (PE-g-MAH) added as a compatibilizer. A dual roller was used as a mixer, and all specimens were produced by the compression molding method. It was found that without compatibilizer, UHMWPE and PU were immiscible polymers and mixing PE-g-MAH reduced the size of the dispersed PU domains by a factor of 10 to reach 0.5–5 μm and caused a more uniform distribution of the PU phase in the UHMWPE matrix. Also, PE-g-MAH influenced the crystallinity of UHMWPE, increased the amorphous region in the UHMWPE phase, and improved interfacial adhesion. The threshold concentration of compatibilizer was 10 wt %, and the compatibilized UHMWPE/PU composites had improved mechanical properties and lower wear rate than the uncompatibilized composite. At some ratio points, compatibilizer composites even had better wear-resistance properties than pure UHMWPE. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3290–3295, 2001