Oxidation of carbon by NOx, with particular reference to NO2 and N2O

The reactions reviewed here concern those between elemental carbon and NO₂, N₂O and NO, sometimes in the presence of oxygen. The section on NO includes only updates to recent reviews. Soots, activated carbons and carbon blacks are more reactive than graphite. The magnitudes of the reaction rates are found to be: NO₂ > N₂O ≈ NO ≈ O₂. The presence of a soluble organic fraction (SOF) in soot is found to influence some reactions, and all three reactions suffer from inhibition by surface products. The mechanisms proposed for the surface adsorbates are summarised. All authors found that two types of active site were present; one forming weak bonds (physisorption), and the other undergoing chemisorption to form groupings such as -C-ONO, -C-ONO₂ or -C-NO₂. The latter decompose to give oxides of carbon, and are sometimes called redox reactions. The adsorbates appear to be the same for all NO_x species. Some elemental nitrogen adsorption takes place, and can involve incorporation into the C skeleton. The attack of NO on carbon proceeds via NO₂, so that catalysts that facilitate this oxidation are effective. Gaseous SO₂ and H₂O assist in the process by forming acids which are good oxidants. The change in activation energy with temperature found experimentally for NO and N₂O may be due to the form of nitrogen on the edge carbon atoms.     

The role of NO2 in the reduction of NO by hydrocarbon over Cu-ZrO2 and Cu-ZSM-5 catalysts

The reduction of NO _x with propene or propane in the presence of 1 or 4% O₂ was studied at low conversions over a 7.4 wt% Cu-ZrO₂ and a 3.2 wt% Cu-ZSM-5 catalyst. The rates of N₂ production were compared in experiments using only NO or a mixture of NO and NO₂ in the feed. They were also compared with the rates of NO₂ reduction to NO under the same conditions, and of NO oxidation to NO₂ in the absence of hydrocarbon. It was found that the reduction of NO₂ to NO was very fast, consistent with literature data. The data were best explained by a reaction scheme in which the hydrocarbon was activated primarily by reaction with adsorbed NO₂ to form an adsorbed oxidized N-containing hydrocarbon intermediate, the reaction of which with NO was the principal route to produce N₂ under lean NO _x conditions.On leave from State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, PR China.     

NO Oxidation Kinetics on Iron Zeolites: Influence of Framework Type and Iron Speciation

Zeolites having MFI, FER and *BEA topology were loaded with iron using solid state cation exchange method. The Fe:Al atomic ratio was 1:4. The zeolites were characterized using nitrogen adsorption, FTIR and DR UV–Vis–NIR spectroscopy. The catalytic activity in NO oxidation and the occurrence of NO _x adsorption was determined in a fixed-bed mini reactor using gas mixtures containing oxygen and water in addition to NO and NO₂ and temperatures of 200–350 °C. Under these reaction conditions, the NO _x adsorption capacity of these iron zeolites was negligible. The kinetic data could be fitted with a LHHW rate expression assuming a surface reaction between adsorbed NO and adsorbed O₂. The kinetic analysis revealed the occurrence of strong reaction inhibition by adsorbed NO₂. FER and MFI zeolites were more active than *BEA type zeolite. MFI zeolite is most active but suffers most from NO₂ inhibition of the reaction rate. FTIR and UV–Vis spectra suggest that isolated Fe³⁺ cations and binuclear Fe³⁺ complexes are active NO oxidation sites. Compared to the isolated Fe³⁺ species, the binuclear complexes abundantly present in the MFI zeolite seem to be most sensitive to poisoning by NO₂.     

Detailed kinetic modeling of NOx adsorption and NO oxidation over Cu-ZSM-5

Detailed kinetic modeling was used in combination with flow reactor experiments to investigate the NO_x adsorption/desorption and NO oxidation over Cu-ZSM-5. NO oxidation is likely an important step for selective catalytic reduction (SCR) using urea and hydrocarbons, and thus was investigated separately. First the NO₂ adsorption on Brönstedt acid sites in H-ZSM-5 was modeled using an NO₂ temperature programmed desorption (TPD) experiment. These results, together with the results of the NO₂ TPD and NO oxidation experiments, were used in developing the model for Cu-ZSM-5. A substantial amount of NO₂ was adsorbed on the catalyst. However, the results from a corresponding NO TPD experiment showed that only very small amounts of NO were adsorbed on the catalyst and therefore this step was not included in the model. The model consists of reversible steps for NO₂ and O₂ adsorption, O₂ dissociation, NO oxidation and two steps for nitrate formation. The first nitrate formation step was disproportionation of NO₂ to form NO and nitrates. This step enabled us to describe the NO production during NO₂ adsorption. Further, in the reverse step the NO reacts with the nitrates and decreased their stability. Without this step the nitrates blocked the surface resulting in to low NO oxidation activity. However, we observe that nitrates can be decomposed also without the presence of NO and in the second reversible step were the nitrates decomposed to form NO₂ and oxygen on the copper. These steps enabled us to describe both the TPD and activity measurement results. NO oxidation was observed even at room temperature. Interestingly, the NO₂ decreased when increasing the temperature up to 100 °C and then increased as the temperature increased further. We suggest that this low-temperature NO oxidation occurs with species loosely bound on the surface and that is included in the detailed mechanism. An additional NO₂ TPD at 30 °C was also modeled to describe the loosely bound NO₂ on the surface. The detailed model correctly describes NO₂ storage, NO oxidation and low-temperature NO oxidation.     

NOx Abatement by Catalytic Traps: On the Mechanism of NOx Trapping Under Automotive Conditions

NO _x adsorption was measured with a barium based NO_x storage catalyst at an engine bench equipped with a lean burn gasoline direct injection engine (GDI). In order to study the influence of gas phase NO₂ on the NO_x storage efficiency two different pre-catalysts were used: One with excellent NO oxidation activity to produce a high NO₂ concentration and another pre-catalyst without NO oxidation activity and therefore high NO concentration at the NO _x storage catalyst inlet. Both pre-catalyst had excellent HC and CO conversion efficiency and therefore the CO and HC concentration at the NO _x storage catalyst inlet was practically zero. No lean NO _x reduction was observed. Under that conditions, experiments with NO _x storage catalysts of different length show that a high NO₂ inlet concentration did not enhance the NO _x storage efficiency. Moreover, we observed reduction of NO₂ to NO over the NO_x storage catalyst. However, in presence of a high NO inlet concentration NO₂ formation was observed which may proceed parallel to NO _x storage.     

Activated carbons modified with sewage sludge derived phase and their application in the process of NO2 removal

Highly porous wood-based activated carbon was treated with species extracted from the surface of pyrolyzed sewage sludge. Their deposition on the external surface was visible by a change of the color of the carbon and on internal surfaces, by a decrease in porosity. The as-received carbon and its impregnated counterpart were heat treated at 950 °C at an inert atmosphere. Data for the adsorption on NO₂ was carried out from dry and moist (70% humidity) air. The results indicated that for all materials a significant amount of NO₂ was reduced to NO and released from the system. Heat treatment increases the capacity possibly as a result of an increase in basicity. The addition of the inorganic phase has a positive effect only when adsorption is run in moist conditions and inorganic nitrates and nitrites were formed. Otherwise, the NO₂ adsorbed and nitric and nitrous acids formed on the surface significantly increase the acidity of the carbons by the formation of oxygen-containing groups and organic nitrates.     

SO2 and NO selective adsorption properties of coal-based activated carbons

The aim of this paper is to study binary gas adsorption on the activated carbon in the fixed-bed reactor. Coal-based granular activated carbons can selectively adsorb SO₂ and NO. Physically adsorbed NO is replaced and desorbed by SO_2. Chemically adsorbed NO can promote the absorption of SO₂. The presence of SO₂ and NO can enhance the chemical adsorption of NO and SO₂, respectively. When the diameter of granular activated carbon decreases and the specific surface area increases, both the penetration time of the activated carbon bed and SO₂ removal efficiency increase. The whole removal efficiency of SO₂ is more than 99% in the penetration time, but the whole removal efficiency of NO is only 55% in the coexistence of SO₂ and NO. SO₂ adsorption capacity of HNO₃ dipped granular activated carbon is higher than that of non-treated one. The two experimental results are agree with each other.     

Modelling of NOx adsorption over NOx adsorbers

Modelling of the phenomena involved during the adsorption of NO_x on NO_x trap catalysts was developed. The aim of the model is the prediction of the quantity of stocked barium nitrate as well as the emissions of NO and NO₂, as a function of time and temperature. The mechanism of the process is sounded on the adsorption of gas species (NO, NO₂, O₂) on platinum sites, equilibrium reaction between adsorbed species followed by the formation of Ba(NO₃)₂. This formation of barium nitrate is limited by the thermal decomposition reaction which liberates NO in the gas phase. The kinetic constant of decomposition of barium nitrate was determined by temperature programmed thermogravimetry on pure Ba(NO₃)₂, using the method of Freeman and Carroll. Other kinetic constants bound to the mechanism were estimated by fitting the results of the model to experimental results.The mechanism was validated for various values of the molar fraction of O₂, the molar fraction of NO and various values of the NO/NO₂ ratio in the gas entering the reactor. It was also tested with different catalyst compositions (variation of the platinum and BaO concentrations). The importance of oxygen in the process was clearly demonstrated as well as the promoting role of NO₂.     

Fundamental studies of NOx storage at low temperatures

A commercial NO_x storage catalyst (Pt, BaO and alumina containing) was investigated by temperature programmed desorption (TPD) experiments in the temperature range 100–400 °C. The catalyst stored a substantial amount of NO_x at 100 °C using NO + O₂. Nitrites or loosely bound NO species are suggested for this storage, since no NO was oxidised at this low temperature. In addition, the released NO_x during the temperature ramp consisted of mainly NO and at lower temperatures the NO₂ dissociation is limited. Water and CO₂ was found to decrease the storage substantially, 92% for the NO + O₂ adsorption at 100 °C. The total storage for 60 min using NO₂ + O₂ at 200 °C was similar when introducing CO₂ and H₂O. However, the initial total uptake of NO_x was decreased. Initially we probably formed loosely bound NO_x species, which likely are strongly influenced by water and CO₂. After longer time periods are barium nitrates probably formed and they can remove the carbonates by forming stable nitrates, thus resulting in the same total uptake of NO_x.     

Spectroscopic Evidence for a Nitrite Intermediate in the Catalytic Reduction of NOx with Ammonia on Fe/MFI

The mechanism of selective catalytic reduction (SCR) of NO_x with NH₃ over Fe/MFI was studied using in situ FTIR spectroscopy. Exposing Fe/MFI first to NH₃ then to flowing NO + O₂ or using the reversed sequence, invariably leads to the formation of ammonium nitrite, NH₄NO₂. In situ FTIR results in flowing NO + NH₃ + O₂ at different temperatures show that NH₃ is strongly adsorbed and reacts with impinging NO_x. The intensity of the NH₄NO₂ bands initially increases with temperature, but passes through a maximum at 120 °C because the nitrite decomposes to N₂ + H₂O. The mechanistic model rationalizes that the consumption ratio of NO and NH₃ is close to unity and that the effect of water vapor depends on the reaction temperature. At high temperature H_2O enhances the rate because it is needed to form NH₄NO₂. At low temperature, when adsorbed H₂O is abundant it lowers the rate because it competes with NO_x for adsorption sites.     

Selective Catalytic Reduction of NOx over H-ZSM-5 Under Lean Conditions Using Transient NH3 Supply

The selective catalytic reduction (SCR) of NO _x over zeolite H-ZSM-5 with ammonia was investigated using in situ FTIR spectroscopy and flow reactor measurements. The adsorption of ammonia and the reaction between NO _x , O₂ and either pre-adsorbed ammonia or transiently supplied ammonia were investigated for either NO or equimolar amounts of NO and NO₂. With transient ammonia supply the total NO reduction increased and the selectivity to N₂O formation decreased compared to continuous supply. The FTIR experiments revealed that NO _x reacts with ammonia adsorbed on Brønsted acid sites as NH₄ ⁺ ions. These experiments further indicated that adsorbed -NO₂ ^– is formed during the SCR reaction over H-ZSM-5.     

NO2 and N2 sorption in MFI films with varying Si/Al and Na/Al ratios

MFI crystals or films with controlled thicknesses and different Si/Al ratios were grown on seeded cordierite monoliths using a clear synthesis mixture with template or a template-free gel. The materials were analyzed by scanning electron microscopy, X-ray diffraction, inductively coupled plasma-atomic emission spectrometry, X-ray photoelectron spectroscopy, thermogravimetric analysis and sorption experiments using N₂ or NO₂ adsorbates. The films were uniformly distributed over the support surface. As expected, the specific monolayer N₂ adsorption capacity (mol/g_zeolite) was constant and independent of film thickness. The specific molar NO₂ adsorption capacity was significantly lower than the specific molar monolayer N₂ adsorption capacity, indicating that NO₂ is adsorbed at specific sites rather than evenly distributed in a monolayer. A number of NO₂ adsorption sites with varying strengths were observed by TPD experiments. At 30 °C, the amount of adsorbed NO₂ in the MFI films increased with increasing Al and Na content as opposed to the N₂ adsorption capacity, which was independent of these parameters. At 200 °C, the adsorbed amount of NO₂ was lower than at 30 °C and apparently independent on Al concentration in the Na-MFI films. These results indicate that different mechanisms are involved in NO₂ adsorption. NO₂ may adsorb weakly on Na⁺ cations and also react with silanol groups and residual water in the zeolite, the latter two results in more strongly bound species. Upon NO₂ adsorption, formation of NO was observed. This work represents the first systematic study of the effects of Al and Na content on NO₂ adsorption in MFI films.     

Adsorption of NO and NO2 on ceria–zirconia of composition Ce0.69Zr0.31O2: A DRIFTS study

In this study, the nature of surface intermediates generated by adsorption of NO and NO₂ on a commercial ceria–zirconia powder of composition Ce_0.69Zr_0.31O₂ was investigated using Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). The conditions of occurrence of the main adsorbed species, i.e. nitrites and nitrates, are studied semi-quantitatively as a function of catalyst pre-treatment and/or type of adsorbed NO_x molecule. On the partially reduced ceria–zirconia, the primary role of NO_x is to re-oxidize the surface via adsorption/decomposition on reduced sites. By contrast, the formation of nitrites and nitrates readily occurs on oxidized surfaces, the latter kind of species being strongly promoted in the case of NO₂ adsorption only.     

FT-IR spectroscopic investigation of the surface reaction of CH4 with NO x species adsorbed on Pd/WO3–ZrO2 catalyst

The interaction of methane at various temperatures with NO _x species formed by room temperature adsorption of NO + O₂ mixture on tungstated zirconia (18.6 wt.% WO₃) and palladium(II)-promoted tungstated zirconia (0.1 wt.% Pd) has been investigated using in situ FT-IR spectroscopy. A mechanism for the reduction of NO over the Pd-promoted tungstated zirconia is proposed, which involves a step consisting of thermal decomposition of the nitromethane to adsorbed NO and formates through the intermediacy of cis-methyl nitrite. The HCOO⁻ formed acts as a reductant of the adsorbed NO producing nitrogen.     

On the preparation and characterization of chars and activated carbons from orange skin

Activated carbons were obtained by carbonization of orange skin waste and partial gasification with CO₂. The orange skin contains a significant amount of inorganic matter mainly potassium, calcium and phosphorus. CO₂ gasification is catalyzed by potassium and calcium, resulting in carbons with a microporous structure. Thermal treatment up to 900 °C applied to orange skin-derived activated carbons yields carbons with a highly developed porous structure, and a significant contribution of mesopores, due to the activation effect of potassium compounds. This porous structure is initially blocked by the inorganic matter that is removed by a subsequent acid wash, opening the porous structure of the final carbon; an activated carbon with a very wide porous structure and a specific surface area of around 1200 m²/g was obtained. The activated carbon with high potassium content shows relatively high NO adsorption capacities in the presence of oxygen at 120 °C, probably due to the catalytic effect of potassium on the oxidation of NO. The breakthrough times of the NO adsorption in the presence of oxygen at 120 °C were predicted by the Bohart and Adams model with a relevant agreement between the calculated and the experimental times.     

Adsorption and reaction of NO on activated carbon in the presence of oxygen and water vapour

A study of the adsorption and reaction of NO in the presence of oxygen and water vapour on an activated carbon obtained from oil palm shells is presented. The study is based on the measurement of breakthrough curves, at temperatures between 100 and 150 °C, and on the subsequent thermal desorption in a fix bed reactor. The concentration of the gas components, NO, O₂ and H₂O, corresponds to a simulation of a flue gas in a coal fired power plant. The experimental results show that the reactions on this system include the simultaneously adsorption, reduction and catalytic oxidation of NO together with the adsorption of created NO₂. During desorption NO₂ reacts to NO through a reductive desorption process. An acceleration of the NO oxidation occurs when the saturation level of the adsorbed NO is reached, resulting in a maximum on the breakthrough curve. Different adsorbed NO species are formed during the process: one thermal unstable NO, and three thermal stable NO species, NO₂, NO and (NO)₂ dimers, respectively.     

Soot combustion activity of NOx-sorbing Cs–MnOx–CeO2 catalysts

Activities of Cs-loaded MnO_x–CeO₂ for combustion of model diesel soot (carbon black) and sorptive NO uptake have been studied. MnO_x–CeO₂ is a pseudo-solid solution having redox properties favorable for soot oxidation. The addition of Cs not only lowered the temperature of soot ignition (T_i), but also increased oxidative NO_x adsorption to form nitrate on the surface. Soot ignition over Cs–MnO_x–CeO₂ was further promoted in a stream of NO/O₂, presumably because nitrate on the surface plays a role of an oxidizing agent. Soot ignition started just before sharp desorption of NO_x, suggesting that adsorbed nitrate species would directly interact with soot.     

Modeling of the NO x trap and experimental validation using ultra-fast NO x analyzers

The present paper employs and validates a NO _x trap model which attempts an optimum compromise between complexity and predictive accuracy. It is shown that using the same set of kinetic data, the model is able to predict the storage rates and the maximum storage amounts as function of temperature. Moreover, the model predicts with reasonable accuracy the NO breakthrough during rich-mode regeneration and the spontaneous/thermal NO₂ release when the temperature is increased in a saturated catalyst. The experimental findings highlight the importance of transient O₂ adsorption/desorption phenomena which are incorporated in the model. The use of ultra-fast responding NO/NO _x analyzers was necessary for the study and modeling of the transient operation following inlet composition switches.     

Performance of fixed-bed KOH impregnated activated carbon adsorber for NO and NO2 removal in the presence of oxygen

KOH-impregnated activated carbon (K-IAC) was used in this study. This paper contains observation the adsorption behavior of NO and NO₂ with/without oxygen and with different bed depths of adsorbent. The paper also defines surface chemical changes due to NO_x adsorption. By using a simple design of adsorber, the packed amount of adsorbent for NO_x abatement for 6 months on a pilot scale was calculated. When oxygen was present, NO and NO₂ had a great improvement in adsorptivity. Adsorption of NO₂ forms a oxide crystal on the surface of the K-IAC and at the same time produces NO, which acts to bring about increased adsorptivity. The higher the bed of adsorbent was, the more NO was produced and the longer the breakthrough time took. The adsorber was designed in a scale-up condition where NO, NO₂ and O₂ were applied to K-IAC. The adsorbate that consumed the least packed amount was NO₂-air followed by NO₂-N₂, NO-air and NO-N₂. The results of the experiment demonstrated that with regard to adsorption of NO and NO₂ on K-IAC, the presence of oxygen and the bed depth of adsorbent were the biggest variables to adsorptivity.     

A Study on the Properties and Mechanisms for NO x Storage Over Pt/BaAl2O4-Al2O3 Catalyst

The NO_x storage catalyst Pt/BaAl₂O₄-Al₂O₃ was prepared by a coprecipitation--impregnation method. For fresh sample, the barium mainly exists as the BaAl₂O₄ phase except for some BaCO₃ phase. The BaAl₂O₄ phase is the primary NO _x storage phase of the sample. EXAFS and TPD were used for investigating the mechanism of NO _x storage. It is found that two kinds of Pt sites are likely to operate. Site 1 is responsible for NO chemisorption and site 2 for oxidizing NO to nitrates and nitrites. When NO adsorbs on the sample below 200 °C, it mainly chemisorbs in the form of molecular states. Such adsorption results in an increase of the coordination magnitude of Pt-O, and a decrease of that of Pt-Pt and Pt-Cl. The coordination distance of Pt-Pt, Pt-Cl and Pt-O also increases. When the adsorption occurs above 200 °C, NO can be easily oxidized by O₂, and stored as nitrites or nitrates at the basic BaAl₂O₄. Site 2 is regenerated quickly. A high adsorption temperature is favorable for nitrate formation.