Quality-of-Service Based Protection in MPLS Control WDM Mesh Networks

Intelligent methods for automatic protection and restoration are critical in optical transport mesh networks. This paper discusses the problem of quality-of-service (QoS)-based protection in terms of the protection-switching time and availability for end-to-end lightpaths in a WDM mesh network. We analyze the backup lightpath-sharing problem in such networks and study the correlation of the working lightpaths and the impact of the correlation on the sharing of the backup lightpaths. We present a multi-protocol-label-switching (MPLS) control-based fully distributed algorithm to solve the protection problem. The proposed algorithm includes intelligent and automatic procedures to set up, take down, activate, restore, and manage backup lightpaths. It greatly reduces the required resources for protection by allowing the sharing of network resources by multiple backup lightpaths. At the same time, it guarantees, if possible, to satisfy the availability requirement even with resource sharing by taking the correlation of working lightpaths into consideration. A simple analysis of the proposed algorithm in terms of computation time and message complexity indicates that the implementation of the algorithm is practical. The illustrative studies that compare the performance of 1:1, unlimited sharing, and QoS-based backup sharing algorithms indicate that QoS-based sharing achieves comparable performance as unlimited sharing, which is much better than the 1:1 backup scheme in terms of connection blocking probability, average number of connections in the network for a given offered load, and network resource utilization.     

Design Method of Logical Topologies with Quality of Reliability in WDM Networks

As the bandwidth capacity of WDM networks continues to grow rapidly,traffic loss caused by a failure of network components is becoming unacceptable. To prevent such traffic loss and thus enhance network reliability, a protection method that prepares backup lightpaths for each working path is now being developed. In this paper, we first introduce the concept of QoR (quality of reliability), which is a realization of QoS with respect to the reliability needed in a WDM network. We define QoR in terms of the recovery time from when a failure occurs to when traffic on the affected primary lightpath is switched to the backup lightpath. After that, we propose a heuristic algorithm that can be used to design a logical topology that satisfies the QoR requirement for every node pair. The objective is to minimize the number of wavelengths needed for a fiber in the logical topology to carry the traffic with the required QoR. We compare this algorithm with two existing algorithms and show that it enables more effective use of wavelength resources; with the proposed algorithm, up to 25% fewer wavelengths are needed than with the other algorithms.     

Survivable lightpath provisioning in WDM mesh networks under shared path protection and signal quality constraints

This paper addresses the problem of survivable lightpath provisioning in wavelength-division-multiplexing (WDM) mesh networks, taking into consideration optical-layer protection and some realistic optical signal quality constraints. The investigated networks use sparsely placed optical-electrical-optical (O/E/O) modules for regeneration and wavelength conversion. Given a fixed network topology with a number of sparsely placed O/E/O modules and a set of connection requests, a pair of link-disjoint lightpaths is established for each connection. Due to physical impairments and wavelength continuity, both the working and protection lightpaths need to be regenerated at some intermediate nodes to overcome signal quality degradation and wavelength contention. In the present paper, resource-efficient provisioning solutions are achieved with the objective of maximizing resource sharing. The authors propose a resource-sharing scheme that supports three kinds of resource-sharing scenarios, including a conventional wavelength-link sharing scenario, which shares wavelength links between protection lightpaths, and two new scenarios, which share O/E/O modules between protection lightpaths and between working and protection lightpaths. An integer linear programming (ILP)-based solution approach is used to find optimal solutions. The authors also propose a local optimization heuristic approach and a tabu search heuristic approach to solve this problem for real-world, large mesh networks. Numerical results show that our solution approaches work well under a variety of network settings and achieves a high level of resource-sharing rates (over 60% for O/E/O modules and over 30% for wavelength links), which translate into great savings in network costs.     

Efficient Protection in MPλS Networks Using Backup Trees: Part One—Concepts and Heuristics

Multi-protocol lambda switching (MPS) has recently been applied in the optical network control plane to provide fast lightpath provisioning. As an increasing amount of traffic is carried in optical transport networks (OTNs), single network failures can affect a vast amount of traffic, making lightpath protection crucial. Therefore, shared backup tree (BT) lightpath protection is a promising paradigm in MPS networks due to its ability of fast recovery and its efficiency in consumed resources. A shared BT is used to protect a group of working lightpaths towards the same destination. From the working lightpaths in such a group, only one affected lightpath at a time can be recovered using the BT. The main problem is how to group and route the working paths (WPs) and how to route the BTs, in such a way that the capacity resources used by the WPs and the BTs are minimized. In Part One of this study (presented in this paper), we propose three approaches to cope with this problem. The first approach is a purely integer linear programming (ILP) based method. The second one is a combination of ILP and a heuristic technique. The last one is a purely heuristic approach. In this paper, these approaches are theoretically compared. In Part Two [1] of this study, several simulations are carried out in order to compare these approaches in terms of performance and computing effort. The experimental results are in line with the theoretical expectations.     

Subpath protection for scalability and fast recovery in optical WDM mesh networks

This paper investigates survivable lightpath provisioning and fast protection switching for generic mesh-based optical networks employing wavelength-division multiplexing (WDM). We propose subpath protection, which is a generalization of shared-path protection. The main ideas of subpath protection are: 1) to partition a large optical network into smaller domains and 2) to apply shared-path protection to the optical network such that an intradomain lightpath does not use resources of other domains and the primary/backup paths of an interdomain lightpath exit a domain (and enter another domain) through a common domain-border node. We mathematically formulate the routing and wavelength-assignment (RWA) problem under subpath protection for a given set of lightpath requests, prove that the problem is NP-complete, and develop a heuristic to find efficient solutions. Comparisons between subpath protection and shared-path protection on a nationwide network with dozens of wavelengths per fiber show that, for a modest sacrifice in resource utilization, subpath protection achieves improved survivability, much higher scalability, and significantly reduced fault-recovery time.     

Optimum Arrangement of Reliable Label-Switched Paths in MPLS Over Optical Networks

In MPLS (Multi-Protocol Label Switching) over optical networks, both the optical level and the MPLS level fault recovery can be considered. Generally, a more flexible path arrangement can be realized by the MPLS level recovery, while fast recovery can be achieved by the optical level recovery. When the optical level recovery is adopted, only normal traffic is carried through the working lightpaths and only recovered traffic is carried through the backup lightpaths. In contrast, the working LSPs (Label-Switched Paths) and the backup LSPs corresponding to other working LSPs can be accommodated into an identical lightpath when the MPLS level recovery is adopted. By such sophisticated accommodation of LSPs into the lightpaths, lightpath bandwidth can be utilized efficiently under the condition that the bandwidth utilization is restricted to attain the given objective of transfer quality for the MPLS packets in the normal state and unrestricted in a short time a failure occurs somewhere in the network. This paper proposes a simple mathematical programming model to obtain the optimum arrangement of the working and backup LSPs assuming the MPLS level recovery and a practical LSPs provisioning mode. By comparing the minimized network cost obtained from the optimum arrangement of the working and backup LSPs with the network cost resulting from the optical level recovery, this paper quantitatively evaluates the effectiveness of such bandwidth utilization improvement obtained from the MPLS level recovery and reveals that the MPLS level recovery can actually reduce the network cost due to its flexible arrangement of LSPs on the lightpaths.     

Efficient algorithms for routing dependable connections in WDMoptical networks

We consider the problem of establishing dependable connections in WDM networks with dynamic traffic demands. We call a connection with fault-tolerant requirements a dependable connection (D-connection). We consider the single-link failure model in our study and recommend the use of a proactive approach, wherein a D-connection is identified with the establishment of the primary lightpath and a backup lightpath at the time of honouring the connection request. We develop algorithms to select routes and wavelengths to establish D-connections with improved blocking performance. The algorithms use the backup multiplexing technique to efficiently utilize the wavelength channels. To further improve channel utilization, we propose a new multiplexing technique called primary-backup multiplexing. Here, a connection may not have its backup lightpath readily available throughout its existence. We develop algorithms based on this technique to route D-connections with a specified restoration guarantee. We present an efficient and computationally simple heuristic to estimate the average number of connections per link that do not have backup lightpaths readily available upon a link failure. We conduct extensive simulation experiments on different networks to study the performance of the proposed algorithms     

Dynamic circuit provisioning in all-optical WDM networks using lightpath switching

In this paper we investigate the problem of provisioning holding-time-aware (HTA) dynamic circuits in all-optical wavelength division multiplexed (WDM) networks. We employ a technique called lightpath switching (LPS) wherein the data transmission may begin on one lightpath and switch to a different lightpath at a later time. Lightpath switches are transparent to the user and are managed by the network. Allowing LPS creates a number of segments that can use independent lightpaths. We first compare the performance of traditional routing and wavelength (RWA) assignment to routing and wavelength assignment with LPS. We show that LPS can significantly reduce blocking compared to traditional RWA. We then address the problem of routing dynamic anycast HTA dynamic circuits. We propose two heuristics to solve the anycast RWA problem: anycast with continuous segment (ACS) and anycast with lightpath switching (ALPS). In ALPS we exercise LPS, and provision a connection request by searching for the best candidate destination node is such a way that the network resources are utilized efficiently. In ACS we do not allow a connection request to switch lightpaths. The lightpaths to each candidate destination node of a request are computed using traditional RWA algorithms. We first compare the performance of ACS to ALPS and observe that ALPS achieves better blocking than ACS. Furthermore, we also compare the performance of these two anycast RWA algorithms to the traditional unicast RWA algorithm. We show that the anycast RWA algorithms presented here significantly outperform the traditional unicast RWA algorithms.     

Reconfiguration of Logical Topologies with Minimum Traffic Disruptions in Reliable WDM-Based Mesh Networks

A wavelength division multiplexing (WDM) network offers a flexible networking infrastructure by assigning the route and wavelength of lightpaths. We can construct an optimal logical topology, by properly setting up the lightpaths. Furthermore, setting up a backup lightpath for each lightpath improves network reliability. When traffic demand changes, a new optimal (or sub-optimal) topology should be obtained by again applying the formulation. Then, we can reconfigure the running topology to the logical topology obtained. However, during this reconfiguration, traffic loss may occur due to the deletion of older lightpaths. In this paper, we consider reconfiguring the logical topology in reliable WDM-based mesh networks, and we propose five procedures that can be used to reconfigure a running lightpath to a new one. Applying the procedures one by one produces a new logical topology. The procedures mainly focus on utilizing free wavelength resources and the resources of backup lightpaths, which are not used usually for transporting traffic. The results of computer simulations indicate that the traffic loss is remarkably reduced in the 14-node network we used as an example.     

Capacity performance of dynamic provisioning in optical networks

This paper describes an architecture and analyzes the performance of dynamic provisioning of lightpaths in an optical network. In dynamic provisioning, a lightpath is set up in real-time without rearranging the working and protection routes of existing lightpaths, and without the knowledge of future lightpath provisioning events. This paper develops a general model of the physical topology of the optical network, and outlines routing approaches for dynamic provisioning of lightpaths. It analyzes via simulations the performance of dynamically provisioned unprotected, 1+1 protected and mesh-restored lightpaths. The analysis of the efficiency of network utilization of dynamic provisioning focuses on the spare capacity needed for protection, and in particular focuses on the impact of sharing of wavelength channels for mesh-restored lightpaths. The main conclusion from the performance studies is that significant capacity gains are achieved with sharing of wavelength-channels for mesh-restored lightpaths with dynamic provisioning even for sparse topologies, and even at moderate loads     

Performance analysis of multicast routing and wavelength assignment protocol with dynamic traffic grooming in WDM networks

The need for on‐demand provisioning of wavelength‐routed channels with service‐differentiated offerings within the transport layer has become more essential because of the recent emergence of high bit rate Internet protocol (IP) network applications. Diverse optical transport network architectures have been proposed to achieve the above requirements. This approach is determined by fundamental advances in wavelength division multiplexing (WDM) technologies. Because of the availability of ultra long‐reach transport and all‐optical switching, the deployment of all‐optical networks has been made possible. The concurrent transmission of multiple streams of data with the assistance of special properties of fiber optics is called WDM. The WDM network provides the capability of transferring huge amounts of data at high speeds by the users over large distances. There are several network applications that require the support of QoS multicast, such as multimedia conferencing systems, video‐on‐demand systems, real‐time control systems, etc. In a WDM network, the route decision and wavelength assignment of lightpath connections are based mainly on the routing and wavelength assignment (RWA). The multicast RWA's task is to maximize the number of multicast groups admitted or minimize the call‐blocking probability. The dynamic traffic‐grooming problem in wavelength‐routed networks is generally a two‐layered routing problem in which traffic connections are routed over lightpaths in the virtual topology layer and lightpaths are routed over physical links in the physical topology layer. In this paper, a multicast RWA protocol for capacity improvement in WDM networks is designed. In the wavelength assignment technique, paths from the source node to each of the destination nodes and the potential paths are divided into fragments by the junction nodes and these junction nodes have the wavelength conversion capability. By using the concept of fragmentation and grouping, the proposed scheme can be generally applied for the wavelength assignment of multicast in WDM networks. An optimized dynamic traffic grooming algorithm is also developed to address the traffic grooming problem in mesh networks in the multicast scenario for maximizing the resource utilization and minimizing the blocking probability. Copyright © 2011 John Wiley & Sons, Ltd.     

Optical resources provisioning: multipoint‐to‐point lightpaths mapping in all‐optical networks

In wavelength‐division multiplexing (WDM) optical networks, the bandwidth request of a traffic stream can be much lower than the capacity of a lightpath. Efficiently grooming low‐speed connections onto high‐capacity lightpaths will improve the network throughput and reduce the network cost. In this paper, we propose and evaluate a new concept of traffic aggregation in WDM mesh networks that aims to eliminate both the bandwidth under‐utilization and scalability concerns that are typical in all‐optical wavelength routed networks. This approach relies on the multipoint‐to‐point lightpath concept. In order to assess the efficiency of our proposal, all underlying network costs are compared. To achieve this aim, we devise a new provisioning algorithm to map the multipoint‐to‐point lightpaths in the network. Our results show that the proposed aggregation technique can significantly improve the network throughput while reducing its cost. Copyright © 2005 John Wiley & Sons, Ltd.     

Availability-Aware Provisioning Strategies for Differentiated Protection Services in Wavelength-Convertible WDM Mesh Networks

In an optical WDM mesh network, different protection schemes (such as dedicated or shared protection) can be used to improve the service availability against network failures. However, in order to satisfy a connections service-availability requirement in a cost-effective and resource-efficient manner, we need a systematic mechanism to select a proper protection scheme for each connection request while provisioning the connection. In this paper, we propose to use connection availability as a metric to provide differentiated protection services in a wavelength-convertible WDM mesh network. We develop a mathematical model to analyze the availabilities of connections with different protection modes (i.e., unprotected, dedicated protected, or shared protected). In the shared-protection case, we investigate how a connection's availability is affected by backup resource sharing. The sharing might cause backup resource contention between several connections when multiple simultaneous (or overlapping) failures occur in the network. Using a continuous-time Markov model, we derive the conditional probability for a connection to acquire backup resources in the presence of backup resource contention. Through this model, we show how the availability of a shared-protected connection can be quantitatively computed. Based on the analytical model, we develop provisioning strategies for a given set of connection demands in which an appropriate, possibly different, level of protection is provided to each connection according to its predefined availability requirement, e.g., 0.999, 0.997. We propose integer linear programming (ILP) and heuristic approaches to provision the connections cost effectively while satisfying the connections' availability requirements. The effectiveness of our provisioning approaches is demonstrated through numerical examples. The proposed provisioning strategies inherently facilitate the service differentiation in optical WDM mesh networks.     

Dynamic Routing and Wavelength Assignment in Optical Networks by Means of Genetic Algorithms

We propose a novel genetic algorithm for solving the dynamic routing and wavelength assignment (DRWA) problem in wavelength-routed optical networks. The algorithm not only obtains low call blocking probability, but it also employs a very short computation time. Moreover, it is capable of providing fairness among connections, that is, to offer approximately the same quality of service (in terms of blocking probability) for all source-destination node pairs. Since requirements on optical network availability are highly severe, we also propose an extension of the algorithm to provide fault-tolerance capability at the optical layer. It is achieved by means of protection, where each optical connection request is provided with a pair of lightpaths (a primary and a backup lightpath). Again, the genetic algorithm proves to be highly efficient, in this case, at performing routing and wavelength assignment of pairs of lightpaths.     

Traffic grooming for survivable WDM networks - shared protection

We investigate the survivable traffic-grooming problem for optical mesh networks employing wavelength-division multiplexing (WDM). In the dynamic provisioning context, a typical connection request may require bandwidth less than that of a wavelength channel, and it may also require protection from network failures, typically fiber cuts. Based on a generic grooming-node architecture, we propose three approaches for grooming a connection request with shared protection: protection-at-lightpath level (PAL); mixed protection-at-connection level (MPAC); separate protection-at-connection level (SPAC). In shared-mesh protection, backup paths can share resources as long as their corresponding working paths are unlikely to fail simultaneously. These three schemes explore different ways of backup sharing, and they trade-off between wavelengths and grooming ports. Since the existing version of the problem for provisioning one connection request with shared protection is NP-complete, we propose effective heuristics. Under today's typical connection-bandwidth distribution where lower bandwidth connections outnumber higher bandwidth connections, we find the following: 1) it is beneficial to groom working paths and backup paths separately, as in PAL and SPAC; 2) separately protecting each individual connection, i.e., SPAC, yields the best performance when the number of grooming ports is sufficient; 3) protecting each specific lightpath, i.e., PAL, achieves the best performance when the number of grooming ports is moderate or small.     

网状WDM网中多播业务的共享保护设计

研究网状波分复用(WDM)光网络中动态多播业务的保护方案,提出一种共享保护和重配置(SPR)算法.该算法根据网络状态动态调整链路代价,为每个多播业务请求建立最小代价工作树,并为光树上互不重叠的工作段提供链路分离的保护段.当网络中发生链路失效时,进行业务段保护切换和局部资源重配置.仿真表明,该算法可以合理共享波长资源、平衡网络负载,有效保护WDM网中任意单链路失效,并在多链路失效情况下大大提高业务恢复能力.     

A novel survivable routing algorithm for shared segment protection in mesh WDM networks with partial wavelength conversion

In this paper, a survivable routing algorithm is proposed for shared segment protection (SSP), called optimal self-healing loop allocation (OSHLA), which dynamically allocates spare capacity for a given working lightpath in mesh wavelength-division-multiplexing (WDM) networks with partial wavelength conversion capability. Two novel graph transformation approaches, namely graph of cycles and wavelength graph of paths, are introduced to solve this problem, in which the task of survivable routing is formulated as a series of shortest path searching processes. In addition to an analysis on the computation complexity, a suite of experiments is conducted to verify OSHLA on four networks with different topologies and traffic loads. We find that the blocking probability and computation complexity are dominated by the upper bound on the length of the working and protection segments. Comparison is made between OSHLA and four other reported schemes in terms of blocking probability. The results show that OSHLA can achieve the lowest blocking probability under the network environment of interest. We conclude that OSHLA provides a generalized framework of survivable routing for an efficient implementation of SSP in mesh WDM partial wavelength convertible networks. With OSHLA, a compromise is initiated by manipulating the upper bound on the length of working and protection segments such that the best performance-computation complexity gain can be achieved.     

业务量疏导WDM网状网中的动态子通路保护算法

该文研究了业务量疏导WDM网状网中的生存性问题,提出一种自适应子通路保护(ASPP)算法。该算法根据网络当前状态以及到达业务连接请求的带宽要求动态调整链路权值;在此基础上选择一条最短路作为工作通路,然后将该通路分为互不重叠的n段子通路(每段经过的链路数为m),并分别找出各自的保护通路。仿真结果表明:ASPP既可以保证业务连接的可靠性要求,同时又允许网络管理者根据一定优化策略调整m值,从而可以在资源利用率和恢复时间之间进行折中。     

Protection Schemes for IP-over-WDM Networks: Throughput and Recovery Time Comparison

This article presents a novel protection approach using Generalized Multi-Protocol Label Switching (GMPLS). This strategy provides protection at the Wavelength Division Multiplexing (WDM) layer, meaning that all Internet Protocol Label-Switched Path (IP LSPs) nested inside a lightpath are protected in an aggregated way. It uses resources efficiently since spare capacity of working primary lightpaths can be used for backup purposes whenever necessary. The IP and WDM layers are treated together as a single integrated network from a control plane point of view, so that network state information from both layers can be used. Besides discussing the strategy proposed and the key features of GMPLS that will allow its implementation, we mathematically formulate the maximum throughput problem. Thereafter, we propose and compare heuristic algorithms for IP-over-WDM networks using three protection approaches: WDM lightpath protection, IP LSP protection, and the proposed protection scheme. Their throughputs and recovery times are analyzed and compared. Our results show that, for a representative mesh network, the proposed aggregated protection scheme presents better protection efficiency and good scalability properties when compared with the other two schemes.     

Post‐Disaster least loaded lightpath routing in elastic optical networks

Disaster events directly affect the physical topology of core networks and may lead to simultaneous failure of multiple lightpaths leading to massive service outages for network operators. To recover from such a failure scenario, the existing routing algorithms running on network nodes (routers or switches) typically attempt to reestablish the connections over new routes with shortest distances and hop count approach. However, this approach may result in congestion on some links, while other links may have the unutilized capacity. Hence, intelligent lightpath computing techniques are required to efficiently route network traffic over the new routes by considering traffic load of each link in addition to distance and hop count to minimize network congestion. In this paper, we have proposed a capacity‐constrained maximally spatial disjoint lightpath algorithm to tackle the provisioning and restoration of disrupted lightpaths in a postdisaster scenario in the context of elastic optical networking. This algorithm computes an alternate least loaded lightpath for disrupted primary lightpath using capacity‐constrained shortest lightpath. Alternate lightpath selection is based on a criteria parameter for a lightpath to be least loaded and constrained by either the length or the spatial distance between primary and alternate lightpaths. The spatial distance between lightpaths enables to reestablish the disrupted connection request away from disaster proximity. The performance of the proposed algorithm is evaluated through simulation for several parameters like blocking probability, network utilization, connection success rates, and minimum spatial distance.