Selective oxidation of methanol to dimethoxymethane over acid-modified V2O5/TiO2 catalysts

Selective oxidation of methanol to dimethoxymethane (DMM) was conducted in a fixed-bed reactor over an acid-modified V₂O₅/TiO₂ catalyst. The influence of the acid modification on its structure, redox and acidic properties, and catalytic performance for methanol oxidation were investigated. The results indicated that the content of vanadia in the catalyst exhibits a vital influence on the dispersion of vanadium species, while the acid modification can enhance its surface acidity. Proper amounts of the acid (W() = 15%) and V₂O₅ (W(V₂O₅) = 15%) components loaded in the acid-modified V₂O₅/TiO₂ catalyst are able to build a bi-functional circumstance that is favorable for the formation of DMM with high activity and selectivity. As a result, for the selective oxidation of methanol, the H₂SO₄-modified V₂O₅/TiO₂ catalyst gives a much higher DMM yield at 150 °C than the unmodified one.     

Electrocatalytic activity of Pt nanoparticles deposited on porous TiO2 supports toward methanol oxidation

Porous TiO₂ thin films were prepared on the Si substrate by hydrothermal method, and used as the Pt electrocatalyst support for methanol oxidation study. Well-dispersed Pt nanoparticles with a particle size of 5–7 nm were pulse-electrodeposited on the porous TiO₂ support, which was mainly composed of the anatase phase after an annealing at 600 °C in vacuum. Cyclic voltammetry (CV) and CO stripping measurements showed that the Pt/TiO₂ electrode had a high electrocatalytic activity toward methanol oxidation and an excellent CO tolerance. The excellent electrocatalytic performance of the electrode is ascribed to the synergistic effect of Pt nanoparticles and the porous TiO₂ support on CO oxidation. The strong electronic interaction between Pt and the TiO₂ support may modify CO chemisorption properties on Pt nanoparticles, thereby facilitating CO oxidation on Pt nanoparticles via the bifunctional mechanism and thus improving the electrocatalytic activity of the Pt catalyst toward methanol oxidation.     

A VOx/meso-TiO2 catalyst for methanol oxidation to dimethoxymethane

Mesoporous TiO₂ was prepared by simply controlling the hydrolysis of Ti(OBu)₄ with the help of acetic acid. The mesoporous TiO₂ had a well-crystallized anatase phase and a high surface area of 290 m² g⁻¹ with a pore size of about 4 nm. The anatase phase and the mesoporous structure were maintained in the VO_x/TiO₂ catalyst with a monolayer dispersion of V₂O₅, however, the surface area decreased to 126 m² g⁻¹. The catalyst was highly active and selective for methanol oxidation, giving about 55% conversion of methanol and 85% selectivity to dimethoxymethane at 423 K.     

Methanol oxidation on carbon-supported Pt-Ru and TiO2 (Pt-Ru/TiO2/C) electrocatalyst prepared using polygonal barrel-sputtering method

Methanol oxidation performance of a carbon-supported Pt-Ru alloy catalyst used at the direct methanol fuel cell (DMFC) anode is improved by adding TiO₂. However, the methanol oxidation performance of the electrocatalyst described above must be enhanced further to realize practical application in DMFCs. In this study, we used our original surface-modifying technique termed the “polygonal barrel-sputtering method” to prepare a carbon-supported Pt-Ru and TiO₂ (Pt-Ru/TiO₂/C) electrocatalyst offering higher methanol oxidation performance. The obtained results show that the methanol oxidation performance of the prepared Pt-Ru/TiO₂/C is superior to that using wet process as the TiO₂ deposition method. Furthermore, for our sputtering method, the peak current of methanol oxidation on the Pt-Ru/TiO₂/C is enhanced by increasing the TiO₂ deposited amount up to 2.8 wt.%. These results suggest that a Pt-Ru/TiO₂ interface area is increased using the polygonal barrel-sputtering method, providing the high methanol oxidation performance of Pt-Ru/TiO₂/C.     

Meldola blue immobilized on a new SiO2/TiO2/graphite composite for electrocatalytic oxidation of NADH

Meldola blue immobilized on a new SiO₂/TiO₂/graphite composite was applied in the electrocatalytic oxidation of NADH. The materials were prepared by the sol-gel processing method and characterized by several techniques including scanning electronic microscopy coupled to energy dispersive spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electronic microscopy (HRTEM). Si and Ti mapping profiles on the surface showed a homogeneous distribution of the components. Ti2p binding energy peaks indicate that the formation of Si-O-Ti linkage is presumably the responsible for the high rigidity of the matrices. The good electrical conductivity presented by the composites (5 and 11 S cm⁻¹) can be related to a homogeneous distribution of graphite particles observed by TEM. After the materials characterization, a SiO₂/TiO₂/graphite electrode was prepared and some chemical modifications were performed on its surface to promote the adsorption of meldola blue. The resulting system presented electrocatalytic properties toward the oxidation of NADH, decreasing the oxidation potential to −120 mV. The proposed sensor showed a wide linear response range from 0.018 to 7.29 mmol l⁻¹ and limit of detection of 0.008 mmol l⁻¹. SiO₂/TiO₂/graphite has shown to be a promising material to be used as a suitable support in the construction of new electrochemical sensors.     

Preparation and characterization of CeO2/TiO2 nanoparticles by flame spray pyrolysis

Nanocrystalline TiO₂, CeO₂ and CeO₂-doped TiO₂ have been successfully prepared by one-step flame spray pyrolysis (FSP). Resulting powders were characterized with X-ray diffraction (XRD), N₂-physisorption, Transmission Electron Microscopy (TEM) and UV-Vis spectrophotometry. The TiO₂ and CeO₂-doped TiO₂ nanopowders were composed of single-crystalline spherical particles with as-prepared primary particle size of 10-13 nm for Ce doping concentrations of 5-50 at%, while square-shape particles with average size around 9 nm were only observed from flame-made CeO₂. The adsorption edge of resulting powder was shifted from 388 to 467 nm as the Ce content increased from 0 to 30 at% and there was an optimal Ce content in association with the maximum absorbance. This effect is due to the insertion of Ce^3+/4+ in the TiO₂ matrix, which generated an n-type impurity band.     

TiO2, TiO2/Ag and TiO2/Au photocatalysts prepared by spray pyrolysis

TiO₂, TiO₂/Ag and TiO₂/Au photocatalysts exhibiting a hollow spherical morphology were prepared by spray pyrolysis of aqueous solutions of titanium citrate complex and titanium oxalate precursors in one-step. Effects of precursor concentration and spray pyrolysis temperature were investigated. By subsequent heat treatment, photocatalysts with phase compositions from 10 to 100% rutile and crystallite sizes from 12 to 120 nm were obtained. A correlation between precursor concentration and size of the hollow spherical agglomerates obtained during spray pyrolysis was established. The anatase to rutile transformation was enhanced with metal incorporations and increased precursor concentration. The photocatalytic activity was evaluated by oxidation of methylene blue under UV-irradiation. As-prepared TiO₂ particles with large amounts of amorphous phase and organic residuals showed similar photocatalytic activity as the commercial Degussa P25. The metal incorporated samples showed comparable photocatalytic activity to the pure TiO₂ photocatalysts.     

Aerobic oxidation of alcohols over Au/TiO2: An insight on the promotion effect of water on the catalytic activity of Au/TiO2

The unique and significant promotion effect of water has been evidenced by the selective oxidation of benzyl alcohol to benzaldehyde over Au/TiO₂ catalysts. Water has dual promotional functions in the reaction system: to help form unique microdroplets in a multiphase reaction system and to assist the oxygen adsorption and activation. The conversion of benzyl alcohol at a molar ratio of water to solvent (p-xylene) of 7 is 7 times higher than in the absence of water. The present work has highlighted the potential of Au/TiO₂ catalysts in aerobic oxidation of alcohols in the unique multiphase reaction system with water as promoting solvent.     

On-line deactivation of Au/TiO2 for CO oxidation in H2-rich gas streams

Au-based catalysts, known for ambient temperature CO oxidation, have to provide stable performance of up to 5000 h in order to be commercially applicable in automotive fuel cells. In this report, the on-line deactivation characteristics of Au/TiO₂ in unconventional PROX conditions are discussed. As opposed to CO removal from air, results in this report suggests that carbonates have a minor effect on deactivation of Au/TiO₂ in dry H₂-rich conditions. Also, no conclusive correlation between surface hydration and deactivation was observed. Rather, deactivation appeared to have occurred as a result of an intrinsic transformation in the oxidation state of the active species in the reducing operating conditions; a process which was reversible in an oxidizing atmosphere.     

Oxidation of CH4 over Pd supported on TiO2-doped SiO2: Effect of Ti(IV) loading and influence of SO2

Titania-modified silicas with different weight% of TiO₂ were prepared by sol–gel method and used as supports for Pd (1 wt%) catalysts. The obtained materials were tested in the oxidation of methane under lean conditions in absence and in presence of SO₂. Test reactions were consecutively performed in order to evaluate the thermal stability and poisoning reversibility. Increasing amounts of TiO₂ improved the catalytic activity, with an optimum of the performance for 10 wt% TiO₂ loading. Moreover, the titania-containing catalysts exhibited a superior tolerance towards SO₂ by either adding it to the reactants or feeding it as a pure pretreatment atmosphere at 350 °C. Catalysts were characterized by XPS, XRD, FT-IR and BET measurements. According to the structural and surface analyses, the mixed oxides contained Si–O–Ti linkages which were interpreted as being responsible for the enhanced intrinsic activity of supported PdO with respect to PdO on either pure SiO₂ or pure TiO₂. Moreover, the preferential interaction of the sulfur molecule with TiO₂ and the easy SO_x desorption from high surface area silica were the determining factors for the superior SO₂ tolerance of the TiO₂-doped catalysts.     

Effect of TiO2 particle size on the photocatalytic reduction of CO2

Pure TiO₂ anatase particles with a crystallite diameters ranging from 4.5 to 29 nm were prepared by precipitation and sol–gel method, characterized by X-ray diffraction (XRD), BET surface area measurement, UV–vis and scanning electron microscopy (SEM) and tested in CO₂ photocatalytic reduction. Methane and methanol were the main reduction products. The optimum particle size corresponding to the highest yields of both products was 14 nm. The observed optimum particle size is a result of competing effects of specific surface area, charge–carrier dynamics and light absorption efficiency.     

Bioactive and electrochemical characterization of TiO2 nanotubes on titanium via anodic oxidation

The selection of bioactive and electrochemically stable materials for implants having effective corrosion resistance during long-term use in the body is essential. In this study, the bioactive and electrochemical properties of titanium implant materials with a nanotube surface treatment and various types of post-treatments were examined. Two types of amorphous TiO₂ nanotubes were grown homogeneously on the surface: one with a larger diameter (approximately 85 nm) and one with a smaller diameter (approximately 50 nm). Amorphous TiO₂ nanotubes were partially crystallized to anatase and rutile by heat treatment at 500 °C for 2 h. The corrosion potential (E_corr) of the heat-treated sample (HT) had a novel value of 0.102 V due to the stable TiO₂ crystal phase compared to the −0.106 V observed in the anodic oxidation sample (AN). The corrosion current density (I_corr) ranged from 0.20 to 0.64 μA/cm² according to the post-treatment conditions. However, at 0.6 V, where a passive layer had formed, the corrosion resistance of the HT was approximately ten times that of the AN and untreated (UT) samples. After evaluating the hydroxyapatite (HA)-forming ability by immersion in a simulated body fluid (SBF) solution, the CP process induced the adsorption of Ca and P onto HT. A comparison of the time-dependent amount of Ca and P adsorption showed that Ca adsorption plays a role in determining the rate at which hydroxyapatite (HA) is formed. For the induction of HA formation, a level of Ca adsorption above a critical level is required.     

Monolithic-like TiO2 nanotube supported Ru catalyst for activation of CH4 and CO2 to syngas

Highly-ordered TiO₂ nanotube arrays (TiNTA) were prepared by an electrochemical anodization method and used as the carrier material to load 1 wt.% Ru. The Ru/TiNTA catalyst was then applied to the combination reactions of the partial oxidation of methane reaction (POM) with the carbon dioxide reforming with methane reaction (CRM) for syngas production. In comparison with the commercial TiO₂ powder (P25) supported 1 wt.% Ru catalyst, Ru/TiNTA shows higher activity and much better stability. The superior performance of Ru/TiNTA is attributed to the specific monolithic-like structure and confinement effect of TiNTA.     

Pd nanoparticles supported on carbon-modified rutile TiO2 as a highly efficient catalyst for formic acid electrooxidation

In this article, Pd nanoparticles supported on carbon-modified rutile TiO₂ (CMRT) as a highly efficient catalyst for formic acid electrooxidation were investigated. Pd/CMRT catalyst was synthesized by using liquid phase reduction method in which Pd nanoparticles was loaded on the surface of CMRT obtained through a chemical vapor deposition (CVD) process. Pd/CMRT shows three times the catalytic activity of Pd/C, as well as better catalytic stability towards formic acid electrooxidation. The enhanced catalytic property of Pd/CMRT mainly arises from the improved electronic conductivity of carbon-modified rutile TiO₂, the dilated lattice constant of Pd nanoparticles, an increasing of surface steps and kinks in the microstructure of Pd nanoparticles and slightly better tolerance to the adsorption of poisonous intermediates.     

Synthesis and electrochemiluminescence of the CeO2/TiO2 composite

CeO₂/TiO₂ composite with kernel–shell structure was synthesized by a sol–gel process. The characterization results show that the composite is made up of anatase phase TiO₂ and cubic system CeO₂. The electrochemiluminescence (ECL) behavior of the CeO₂/TiO₂ composite was studied by a cyclic voltammetry in the presence of persulfate, and the effect factors on ECL emission were discussed. Based on a series of experiments, it is proposed that the strong dual ECL emission produced by the CeO₂/TiO₂ composite resulted from the benefit ECL effect of interface heterojunction in composite.     

TiO2 nanotubes and CNT–TiO2 hybrid materials for the photocatalytic oxidation of propene at low concentration

In this work, we investigated titanium dioxide (TiO₂) nanotubes and CNT–TiO₂ hybrid materials for the photocatalytic oxidation (PCO) of propene at low concentration (100 ppmv) in gaseous phase. The materials were prepared via sol–gel method using sacrificial multi-walled carbon nanotubes (CNT) as templates and subsequent heat treatments to obtain the desired crystalline phase (anatase, rutile or a mixture of both) and eventually to remove the carbon template. We also studied rutile nanotubes for the first time and demonstrate that the activity strongly depends on the crystalline composition, following rutile < anatase < anatase/rutile mixture. The enhanced activity of the anatase–rutile mixture is attributed to the decrease in the electron–hole pair recombination due to the multiphasic nature of the particles. The key result of this work is the exceptional performance of the CNT–TiO₂ hybrid, which yielded the highest observed photocatalytic activity. The improved performance is attributed to synergistic effects due to the hybrid nature of the material, resulting in small anatase crystalline sizes (CNT act as heat sinks) and a reduced electron–hole pair recombination rate (CNTs act as electron traps). These results demonstrate the great potential of hybrid materials and stimulate further research on CNT-inorganic hybrid materials in photocatalysis and related areas.     

Combined TiO2/SiO2 mesoporous photocatalysts with location and phase controllable TiO2 nanoparticles

Combined TiO₂/SiO₂ mesoporous materials were prepared by deposition of TiO₂ nanoparticles synthesised via the acid-catalysed sol–gel method. In the first synthesis step a titania solution is prepared, by dissolving titaniumtetraisopropoxide in nitric acid. The influences of the initial titaniumtetraisopropoxide concentration and the temperature of dissolving on the final structural properties were investigated. In the second step of the synthesis, the titania nanoparticles were deposited on a silica support. Here, the influence of the temperature during deposition was studied. The depositions were carried out on two different mesoporous silica supports, SBA-15 and MCF, leading to substantial differences in the catalytic and structural properties. The samples were analysed with N₂-sorption, X-ray diffraction (XRD), electron probe microanalysis (EPMA) and transmission electron microscopy (TEM) to obtain structural information, determining the amount of titania, the crystal phase and the location of the titania particles on the mesoporous material (inside or outside the mesoporous channels). The structural differences of the support strongly determine the location of the nanoparticles and the subsequent photocatalytic activity towards the degradation of rhodamine 6G in aqueous solution under UV irradiation.