Inorganic-organic hybrid polyoxometalate containing supramolecular helical chains: Preparation, characterization and application in chemically bulk-modified electrode

An inorganic-organic hybrid polyoxometalate (POM) (Hbpy)₄[SiMo₁₂O₄₀] (1) (bpy = 2,4-bipyridine), has been prepared and characterized. X-ray diffraction study reveals that compound 1 contains interesting organic double helical chains. The hybrid nanoparticles was used as a solid bulkmodifier to fabricate a three-dimensional chemically modified carbon paste electrode (1-CPE) by direct mixing. The electrochemical behavior and electrocatalysis of 1-CPE has been studied in detail. The results indicate that 1-CPE has a good electrocatalytic activity toward the reduction of nitrite in 1 M H₂SO₄ aqueous solution. 1-CPE shows remarkable stability that can be ascribed to the interactions existed between POM anions and organic double helical bpy chains, which are very important for practical applications in electrode modification.     

Two new siloxanic proton-conducting membranes: Part I. Synthesis and structural characterization

The development of stable polymer electrolytes having good proton conductivity, low cost and operating at medium temperatures represent a crucial step in the evolution of polymer electrolyte fuel cells. We describe two new siloxanic proton-conducting membranes that were synthesized through a two-stage protocol. In the first stage, a poly(methyl hydrosiloxane) precursor (P) bearing siloxane side chains with sulfonic acid groups was prepared. In the second step, the hydrolysis of pristine precursor or its derivative obtained by grafting siloxane chains on P yielded two types of membranes with the formulas {Si(CH₃)₃O[Si(CH₃)HO]_21.26[Si(CH₃)((CH₂)₃SO₃H)O]_1.8[Si(CH₃)((CH₂)₃Si(CH₃)₂O)O]₁₄Si(CH₃)₃}_n (A) and {Si(CH₃)₃O[Si(CH₃)HO]_21.26[Si(CH₃)((CH₂)₃SO₃H)O]_1.8[Si(CH₃)((CH₂)₃(Si(CH₃)₂O)_w)O]_v[Si(CH₃)((CH₂)₃Si(CH₃)₂O-)O]_14 − vSi(CH₃)₃}_n (B), with w = 20.31. Polymer membranes of A and B were prepared by means of a hot-pressing process at 80 °C and 10 t/cm². Scanning electron microscopy showed that A and B are rubbery materials with rough and transparent surfaces. Thermogravimetric investigations performed under air atmosphere disclosed that A and B are thermally stable up to at least 198 °C. DSC measurements yielded T_g(s) of −44 and −60 °C for A and B, respectively. The polymers exhibit ionic exchange capacities of 0.33 (A) and 0.15 meq/g (B). FT-IR and FT-Raman investigations revealed that the polymers consist of reticulated siloxane networks with pendant silicone chains having sulfonic acid groups.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

New hyperbranched polymers containing second-order nonlinear optical chromophores: Synthesis and nonlinear optical characterization

Three hyperbranched polymers (P1-P3) containing second-order nonlinear optical chromophores were synthesized by copolymerization of aromatic dialdehydes (carbazole, triphenylamine or benzene moieties) with sulfonyl-based chromophores attached with three active methylene groups, from “A₂ + B₃” approach based on simple Knoevenagel reaction. For comparison, their corresponding linear analogue polymers (P4-P6) were prepared. All the polymers are soluble in common organic solvents, and exhibit good thermal stability. The tested NLO properties of the hyperbranched polymers are better than their corresponding linear polymers, due to the three-dimensional spatial separation of the chromophores in the obtained hyperbranched polymeric structures.     

New light-emitting hyperbranched polymers prepared from tribromoaryls and 9,9-dihexylfluorene-2,7-bis(trimethyleneborate)

Three new hyperbranched polymers (P1-P3) were prepared by copolymerization of tribromoaryl moieties (triphenylamine, carbazole and fluorene moieties) with 9,9-dihexylfluorene-2,7-bis(trimethyleneborate) from “A₂ + B₃” approach based on Suzuki polycondensation reaction. They are soluble in common organic solvents, and exhibit good thermal stable luminescence. Interestingly, unlike most of fluorene-containing polymeric materials, P3 emits strong green light due to its special structure. Double-layer devices with configurations ITO/PEDOT/Polymer (50 nm)/TPBI(50 nm)/LiF(0.5 nm)/Al(80 nm) were fabricated and emitted blue or green light, with maximum luminance in the range of 25-142 cd/m² and the current efficiency up to 0.18 cd/A.     

Propylene polymerisations with novel heterogeneous combination metallocene catalyst systems

Propylene was polymerised with novel combination metallocene catalyst systems prepared by an emulsion-based heterogenisation method in liquid monomer conditions. The catalyst combinations investigated were rac-dimethylsilanylbis(2-methyl-4-phenyl-1-indenyl)zirconium dichloride/rac-[ethylenebis(2-(tert-butyldimethylsiloxy)indenyl)]zirconium dichloride/methylaluminoxane (MAO) (1 + 2) and rac-dimethylsilanylbis(2-methyl-4-phenyl-1-indenyl)zirconium dichloride/rac-dimethylsilanylbis(2-isopropyl-4-[3,5-dimethylphenyl]indenyl)zirconium dichloride/MAO (1 + 3). The effects of polymerisation temperature and hydrogen on catalyst performance and polymer properties, as well as copolymerisation with hexene and ethylene were investigated. Depending on the polymerisation conditions, M_w of polypropylene varied from 144 to 286 kg/mol for 1 + 2 and from 200 to 390 kg/mol for 1 + 3. Combination 1 + 2 produced broader molecular weight distribution (MWD) than 1 + 3, and a bimodal MWD with clearly separated low- and high-M_w polymer fractions was observed with 1 + 2. The two catalyst systems showed similar hydrogen and hexene responses. Each metallocene precursor showed individual response towards the polymerisation conditions, especially polymerisation temperature, suggesting that interaction between the catalyst active sites was negligible in the studied systems.     

Optical and electroluminescent properties of polyfluorene copolymers and their blends

Light emitting properties of several polyfluorene (PF) copolymers (P1-P4) and their blends have been investigated. Light emitting diodes were fabricated with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al. The EL peak wavelengths were 421 nm (violet), 505, 513 nm (green) and 570 nm (yellow) for PF copolymers and 510, 535 nm (green) for P1/P2 and P1/P3 blends, respectively. Förster energy transfer in the photoluminescence and electroluminescence of the polymer blends P1/P2 and P1/P3 was studied. The LED using the polymer blend P1/P2 showed a turn-on voltage of 2.5 V and a brightness of 5×10⁴ cd/m² at 7 V. The highest external quantum efficiency was observed to be 3.71% at 5 V. Upon addition of 20 wt% of the green emitter P2 to the violet emitter P1, the device efficiency increased from 1.18 to 3.71%.     

A unimolecular nanocapsule: Encapsulation property of amphiphilic polymer based on hyperbranched polythreitol

Hyperbranched polythreitol (1) with different molecular weights (M_w,SLS: 1.18 × 10⁴ and 4.79 × 10⁴) was reacted with trityl chloride in DMF to afford a novel amphiphilic polymer (2) consisting of 1 as the hydrophilic core and the trityl groups as the hydrophobic shell. Compound 2 was tested for its ability to act as a unimolecular nanocapsule toward the water-soluble dye, rose bengal (RB). Their encapsulation and release properties were also evaluated by comparison with the degree of substitution (DS) of the trityl groups, i.e., the hydrophobic shell density. The polymers were found to have very good unimolecular nanocapsule characteristics even at extremely low concentrations. The average number of RBs per polymer molecule depended on the hydrophilic core size and the hydrophobic shell density. The increasing DS value led to a decrease in the encapsulated amount due to the decrease in the hydrophilic core space, while the low DS value (less than ca. 20 mol%) led to a destabilization as a unimolecular nanocapsule and a lower encapsulation ability. In particular, 2 with ca. 23% DS value showed an efficient encapsulation. Based on a release test of the RB-loaded unimolecular nanocapsules, the polymers showed a high RB-holding ability in water.     

Synthesis, electroluminescence, and photovoltaic properties of dendronized poly(p-phenylene vinylene) derivatives

Two dendronized poly(p-phenylene vinylene) (PPV) derivatives, ED-PPV and BB-PPV, have been successfully synthesized according to the Gilch route. The obtained polymers possess excellent solubility in common solvents, good thermal stability with 5% weight loss temperature of more than 340 °C. The weight-average molecular weight (M_w) and polydispersity index (PDI) of ED-PPV and BB-PPV are in the range of (1.26-2.34)×10⁵ and 1.37-1.45, respectively. Polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al devices were fabricated, and the PLEDs emitted green-yellow light. The turn-on voltages of the PLEDs based on ED-PPV and BB-PPV were approximately 4.3, and 4.5 V, respectively. The PLED devices of ED-PPV exhibited the maximum luminance of about 157 cd/m² at 10.5 V. Photovoltaic cells with the configuration of ITO/PEDOT:PSS/polymer:C₆₀ (1:1)/Al were also fabricated, and the energy conversion efficiency of the devices based on ED-PPV and BB-PPV was measured to be 0.58, and 0.014%, respectively, under the white light at 75 mW/cm².     

Two new siloxanic proton conducting membranes: Part II. Proton conductivity mechanism and NMR study

The synthesis and structural characterization of two types of membranes with formulas {Si(CH₃)₃O[Si(CH₃)HO]_21.26-[Si(CH₃)((CH₂)₃SO₃H)O]_1.8-[Si(CH₃)((CH₂)₃Si(CH₃)₂O-)-O]₁₄-Si(CH₃)₃}_n (A) and {Si(CH₃)₃O[Si(CH₃)HO]_21.26-[Si(CH₃)((CH₂)₃SO₃H)O]_1.8-[Si(CH₃)((CH₂)₃(Si(CH₃)₂O-w₎)-Ov_][Si(CH₃)((CH₂)₃Si(CH₃)₂O-)-O_]14−vSi(CH₃)₃}_n (B), (w=20.31), were previously proposed.The ac electrical response of A and B was fully characterized in the 40 Hz-2 MHz frequency region by studying the impedance spectra in the medium and low frequency regions by equivalent circuits and complex dielectric spectra at high frequency in terms of dielectric relaxation modes. Results demonstrated that A and B conduct ionically by means of a proton exchange event which occurs via a vehicular mechanism between neighboring water clusters formed by water molecules aggregated around each sulfonic acid group of the siloxane side chains. The proton conductivities at 115 °C of ca. 1.9 × 10⁻³ and 1.8 × 10⁻⁴ S cm⁻¹ of fully hydrated membranes A and B, respectively, classify these silicone networks as good proton conductors.Membrane B was chosen for a closer investigation using NMR spectroscopy. Solid state ²⁹Si MAS NMR experiments gave further insight about the three-dimensional structure. Proton diffusion measurements provided some encouraging results about proton dynamics of this membrane signaling the great potential of siloxanic based proton conductors.     

Synthesis, characterization, and high gas permeability of poly(diarylacetylene)s having fluorenyl groups

Diarylacetylenes having fluorenyl groups and other substituents (trimethylsilyl, t-butyl, bromine, fluorine) (1a-1) were polymerized with TaCl₅-n-Bu₄Sn. Monomers 1a-l produced high molecular weight polymers 2a-l (M_w 5.1 × 10⁵-1.3 × 10⁶) in 12-59% yields. All of the polymers were soluble in common organic solvents, and gave tough free-standing membranes by the solution casting method. The onset temperatures of weight loss of polymers 2a-l in air were over 400 °C, indicating considerably high thermal stability. All the polymer membranes showed high gas permeability; e.g., the oxygen permeability coefficient (PO₂) of 2a was as large as 4800 barrers. Membrane 2d possessing two fluorine atoms at meta and para positions of the phenyl ring showed the highest oxygen permeability (PO₂ = 6600 barrers) among the present polymers.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Synthesis and characterization of a silarylene-siloxane-diacetylene polymer and its conversion to a thermosetting plastic

The synthesis and characterization of a linear silarylene-siloxane-diacetylene polymer 1 and its conversion to a highly cross-linked thermoset 4 are discussed. The linear polymer was prepared via polycondensation of 1,4-bis(dimethylaminodimethylsilyl)butadiyne, [(CH₃)₂N-Si(CH₃)₂-CC-CC-(CH₃)₂SiN(CH₃)₂], 2 with 1,4-bis(hydroxydimethylsilyl)benzene 3. Conversion to a thermoset 4 occurs through the diacetylene groups above 300 °C. The thermoset was observed to exhibit long-term thermo-oxidative stability up to 350 °C in air as determined by thermogravimetric analysis.     

Effects of internal linkage groups of fluorinated diamine on the optical and dielectric properties of polyimide thin films

To investigate the difference of the trifluoromethyl (CF₃) group and ether group affecting the optical property of fluorinated polyimides (PIs), we prepared 4,4′-bis(4-amino-2-trifluoromethylphenoxy)diphenyl ether (4) with three ether groups and 2,2-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]hexafluoropropane (5) with four CF₃ groups with 2-chloro-5-nitrobenzotrifluoride and 4,4′-dihydroxydiphenyl ether or 2,2-bis(4-hydroxyphenol)hexafluoropropane. Two series of organosoluble and light-colored PIs (4a-4c, 5a-5c) were synthesized from 4 and 5 with various aromatic dianhydrides: 3,3,4,4-benzophenonetetracarboxylic dianhydride (BTDA) (a), 4,4-oxydiphthalic anhydride (ODPA) (b), and 4,4-hexafluoroisopropylidenediphthalic anhydride (6FDA) (c), prepared through a typical two-step polymerization method. These PIs were soluble in amide polar solvents and even in less polar solvents. The glass-transition temperatures (T_g) of 4a-5c were 221-249 °C and the 10% weight-loss temperatures were above 530 °C. Their films had cutoff wavelengths between 339 and 399 nm and yellowness index ranges from 1.95 to 42.60. The dielectric constants estimated from the average refractive indices are 2.59-2.93 (1 MHz). In a comparison of the PI series based on 4, 5, and 4,4′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (6), we found that the CF₃ group and ether group on the diamine had almost same effect in lowering the color, but the ether group had better thermal stability. The color intensity of the three PI series was lowered in the following order: 6 > 4 > 5. The PI 5c, synthesized from diamine 5 and dianhydride c, had six CF₃ groups in a repeated segment and ether group at the same time, so it exhibited the lightest color among the three series.     

Orange to black electrochromic behaviour in poly(2-(2-thienyl)-1H-pyrrole) thin films

We have studied an electrochromic precursor, 2-(2-thienyl)-1H-pyrrole (1), using two improved procedures of the Trofimov reaction. Optimised stereochemical calculations at the B3LYP/6-311G* level showed almost equal s-cis and s-trans conformational populations in 1 with marked out-of-plane deviations of ca. 30°. Model calculations suggest that the predominant rotational conformation in undoped poly(1) would be s-trans with the essential out-of-plane deviations around the all three interheterocyclic bonds of ca. 25-30°. Monomer 1 exhibited two irreversible oxidation processes at +0.86 and +1.3 V corresponding to the oxidation of the pyrrole and thiophene rings, respectively. Orange to black electrochromic behaviour was found in ClO₄⁻ doped poly(1) thin films with colouring and bleaching times of 1.8 and 1.3 s, respectively. The colouration efficiency during the bleaching process was 233 cm²/C. The optical contrast at 450 nm was 19% and in the near-IR was 36%. The band-gap of poly(1) (1.6-1.7 eV) was found to be significantly lower than that of polypyrrole (2.85 eV) and polythiophene (2.3 eV) as a consequence of increased electron delocalisation in the system. Important differences in the morphology of doped and dedoped poly(1) films were observed by atomic-force microscopy (AFM). Doped poly(1) films showed a granular morphology with primary particles of 45-60 nm in size and an average surface roughness of 3.5 nm. On the other hand, dedoped poly(1) films showed interconnected aggregates of 65-90 nm in size as a consequence of particle fusion, with a surface roughness of 9.2 nm. In summary, poly(1) is a promising material for emerging flexible electrochromic devices such as displays and variable optical attenuators.     

Thiophene-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene)s: Synthesis, characterisation and optical properties

This work describes the synthesis and characterisation of two types of thiophene-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene)s (PAE-PAV) copolymers, whose repeating units (-Ph-CC-Th-CHCH-Ph-CHCH-)_n, 5, and (-Th-CC-Ph-CC-Th-CHCH-Ph-CHCH-)_n, 8a-c, consist, respectively, of a 1:2 and a 2:2 ratio of triple bond/double bond moieties. Comparison of their photophysical, electrochemical and photovoltaic properties has been carried out. Although similar electrochemical data (HOMO: −5.43 eV, LUMO: ∼−3.15 eV, ) as well as identical thin film absorption behaviour (λ_a=500 nm, ) were obtained for both types of materials, significant differences in their thin film photoluminescence behaviour and photovoltaic properties were observed. While polymer 5 shows a fluorescence maximum at λ_e=568 nm (with a fluorescence quantum yield of Φ_f=7%), a total fluorescence quenching was observed in 8. Far better photovoltaic performance was obtained from solar cells (set up: ITO/PEDOT:PSS/active layer/LiF/Al; active layer consisting of 5 or 8b as donor and PCBM as acceptor in a 1:3 ratio by weight) designed from 5 than from 8b. Open circuit voltage, V_OC, as high as 900 mV and power conversion efficiency, η_AM1.5, around 1.2% were obtained. This can be attributed to the 1:2 triple bond/double bond ratio as well as the grafting of shorter octyloxy and 2-ethylhexyloxy side chains in 5 and to its comparatively higher molecular-weight.     

New amphiphilic fluorescent CBABC-type pentablock copolymers containing pyrene group by two-step atom transfer radical polymerization (ATRP) and its self-assembled aggregation

A series of novel amphiphilic fluorescent CBABC-type pentablock copolymers (Py-PMMA-PEG4600-PMMA-Py) were prepared from BAB-type amphiphilic triblock copolymer (PMMA-PEG4600-PMMA) as macroinitiator with various contents of 1-(methacryloyloxyethylamino-carboxylmethyl) pyrene (PyMOI) by atom transfer radical polymerization (ATRP) in toluene using CuBr/2,2-bipyridine as catalyst system. Triblock copolymer (PMMA-PEG4600-PMMA) was prepared by ATRP and obtained from Br-PEG4600-Br as macroinitiator with methyl methacrylate in tetrahydrofuran using the same catalyst. The molecular weights of pentablock copolymers which were reinitiated by PMMA-PEG4600-PMMA macroinitiator were calculated from ¹H NMR spectra up to 42,400 gmol⁻¹. The polydispersity of pentablock copolymers obtained from GPC analysis was narrow between 1.10 and 1.38. The crystallinity of triblock copolymer (PMMA-PEG4600-PMMA) was decreased slightly with incorporating PMMA segment. Introducing the bulky pyrene substituent into pentablock copolymer, the melting temperature was not observed and all pentablock copolymers showed amorphous patterns in wide-angle X-ray scattering (WAXS) due to decrease in the degree of crystallinity of polymer chain because of disturbing regular packing. The temperatures at 10% weight loss (Td₁₀), examined by TG analysis, showed values ranging from 265 to 323 °C in nitrogen and 264 to 313 °C in air. Fluorescence spectra of Py-PMMA-PEG4600-PMMA-Py exhibited stronger excimer emission at ca. 480 nm due to the aggregations of pyrene group formed via interaction of the hydrophobic chains. The more content of PyMOI segment in pentablock copolymers can obtain the higher emission intensity ca. 480 nm. When there were higher PyMOI contents (84.9 wt% PyMOI) in pentablock copolymers, they formed larger aggregates (210 nm) in SEM micrographs. On the other hand, while increasing the concentration of the polymer solution in THF, the morphology was changed from spherical (0.1 mg/mL) to chainlike (1.0 mg/mL) aggregates.     

Fluorescent coumarin derivatives with large stokes shift, dual emission and solid state luminescent properties: An experimental and theoretical study

Coumarin derivatives containing 8-benzothiazole (C-2) and its difluoroboron bound derivative (C-3) were prepared. Both derivatives show dual emission at 322 nm and 513 nm and large Stokes shift (188 nm), compared to the unsubstituted coumarin (C-1), which shows emission at 356 nm with small Stokes shift of 46 nm. C-2 and C-3 show fluorescence in solid state, in contrast the C-1 is non-fluorescent in the solid state. The excited state intramolecular proton transfer (ESIPT) process of C-2 was fully rationalized by DFT/TDDFT calculations with optimization of the ground state (S₀) and excited state (S₁) geometries. TDDFT calculations propose that the large Stokes shift of C-2 and C-3 are due to the re-distribution of the frontier molecular orbitals at excited states. Study of the potential energy curve of C-2 indicated that the dual emission of the C-2 is due to the simultaneous S₁ and S₃ emission, not the rotamer of the enol form.     

Organic-inorganic hybrid materials from a new octa(2,3-epoxypropyl)silsesquioxane with diamines

Hybrid materials based on a new polyhedral oligomeric silsesquioxane, octa(2,3-epoxypropyl)silsesquioxane (OE) with diamines of 4,4′-methylenedianiline (DDM) and 5-trifluoromethyl-1,3-phenylenediamine (FPA) were prepared and characterized. OE was synthesized from cage-structured octaallylsilsesquioxane (OA) with m-chloroperbenzoicacid. The FTIR studies suggested that the N-H bond in diamines was not completely reacted with epoxy group due to steric hindrance and also extensive hydrogen bonding existed in the hybrid materials. The retention of the cage structure in the prepared hybrid materials was suggested by the FTIR and ²⁹Si NMR studies. The OE/FPA hybrid materials had superior thermal/mechanical characteristics than the OE/DDM due to the higher rigidity of the FPA than that of DDM or the silicon-fluorine interaction enhancing crosslinking reaction or hydrogen bonding. The prepared OE/FPA had a T_g of 170 °C, which was higher than diglycidyl ether of bisphenyl A (DGEBA)/DDM at the same stoichiometric ratio. It also had excellent thermal, mechanical, and dielectric characteristics with high storage modulus of 1.8 GPa (30 °C) and 0.3 GPa (250 °C), low coefficient of thermal expansion of 86 μm/m °C, and dielectric constant of 2.19. Thus, it can be high performance materials with potential applications for electronic packaging.     

Syntheses of group 4 transition metal complexes bearing 2-pyridinethiolate ligands and their catalytic activities for ethylene polymerization

Titanium bis(2-pyridinethiolate) complexes, Ti(6-R-SPy)₂(NMe₂)₂ (6-R-SPy = 6-R-2-pyridinethiolate, 3a: R = H; 3b: R = Me; 3c: R = Ph; 3d: R = C₆H₄-4-Me; 3e: R = C₆H₄-4-t-Bu; 3f: R = C₆H₃-3,5-Me₂), and the titanium bis(2-pyridinolate) complexes, Ti(6-Ph-OPy)₂(NMe₂)₂ (6-Ph-OPy = 6-phenyl-2-pyridinolate, 8) were prepared by treating Ti(NMe₂)₄ with 2 equiv. of 6-R-2-pyridinethiol or 6-Ph-2-pyridinol. The cis-configuration of the diamido moieties in the pseudo octahedral geometry was elucidated by X-ray crystallography for 3a. Reaction of M(NMe₂)₄ (M = Ti, Zr) with 4 equiv. of 2-pyridinethiol cleanly gave tetrakis(pyridinethiolate) complexes, M(6-H-SPy)₄·THF (6: M = Ti; 7: M = Zr). The triangular dodecahedral geometries of 6 and 7 were also revealed by X-ray crystallography. These complexes catalyzed ethylene polymerization upon activation with MAO (methylaluminoxane) or MMAO (modified MAO). The catalytic activities of titanium bis(6-aryl-pyridinethiolate) systems were found to be remarkably higher than that of titanium bis(6-methyl-pyridinethiolate) system. Among the complexes synthesized in this study, Ti[6-(C₆H₃-3,5-Me₂)-SPy]₂(NMe₂)₂ (3f)/MMAO showed the highest activity (1200 kg/Ti-mol h atm) for ethylene polymerization at 60 °C under atmospheric pressure. In contrast, the activity of the corresponding 6-aryl-pyridinolate system 8/MMAO was rather low (9.3 kg/Ti-mol h atm). Both the N-S chelating structure and the bulky aryl substituents are essential for the high activities of the 6-aryl-pyridinethiolate complexes.