Preparation of functionalized graphene sheets by a low-temperature thermal exfoliation approach and their electrochemical supercapacitive behaviors

Two kinds of functionalized graphene sheets were produced by thermal exfoliation of graphite oxide. The first kind of functionalized graphene sheets was obtained by thermal exfoliation of graphite oxide at low temperature in air. The second kind was prepared by carbonization of the first kind of functionalized graphene sheets at higher temperature in N₂. Scanning electron microscopy images show that both two kinds of samples possess nanoporous structures. The results of N₂ adsorption-desorption analysis indicate that both of two kinds of samples have high BET surface areas. Moreover, the second kind of functionalized graphene sheets has a relatively higher BET surface area. The results of electrochemical tests is as follows: the specific capacitance values of the first kind of functionalized graphene sheets in aqueous KOH electrolyte are about 230 F g⁻¹; the specific capacitance values of the second kind of functionalized graphene sheets with higher BET surface areas are only about 100 F g⁻¹; however, compared with the first kind of functionalized graphene sheets, the second kind has a higher capacitance retention at large current density because of its good conductive behaviors; furthermore, in non-aqueous EC/DEC electrolyte, the specific capacitance values of the first kind sample and the second kind sample are about 73 F g⁻¹ and 36 F g⁻¹, respectively.     

Metal-organic framework (MOF) as a template for syntheses of nanoporous carbons as electrode materials for supercapacitor

Five nanoporous carbons (NPCs) were prepared by polymerizing and then carbonizing carbon precursor of furfuryl alcohol accommodated in a porous metal-organic framework (MOF-5, [Zn₄O(bdc)₃], bdc = 1,4-benzenedicarboxylate) template. The Brunauer-Emmett-Teller (BET) surface areas for five NPC samples obtained by carbonizing at the temperatures from 530 to 1000 °C fall into the range from 1140 to 3040 m² g⁻¹ and the dependence of BET surface areas on carbonization temperatures shows a “V” shape. All the five NPC samples have a pore size distribution centered at about 3.9 nm. As electrode materials for supercapacitor, the NPC samples obtained at the temperatures higher than 600 °C display the ideal capacitor behaviors and give rise to almost constant specific capacitance (above 100 F g⁻¹ at 5 mV s⁻¹) at various sweep rates, which is associated with their mesoporous characteristics. However, the NPC sample with the highest BET surface area (3040 m² g⁻¹) obtained by carbonizing at 530 °C gives a unusually low capacitance (12 F g⁻¹ at 5 mV s⁻¹), which may be attributed to the poor conductivity of the carbon material due to the low carbonization temperature.     

Effect of pore size distribution of coal-based activated carbons on double layer capacitance

A series of coal-based activated carbons representing a wide range of mesopore content, from 16.7 to 86.9%, were investigated as an electrode in electric double layer capacitors (EDLCs) in 1 mol l⁻¹ H₂SO₄ and 6 mol l⁻¹ KOH electrolytic solutions. The activated carbons (ACs) used in this study were produced from chemically modified lignite, subbituminous and bituminous coals by carbonization and subsequent activation with steam. The BET surface area of ACs studied ranged from 340 to 1270 m² g⁻¹. The performance of ACs as EDLC electrodes was characterized using voltammetry, galvanostatic charge/discharge and impedance spectroscopy measurements. For the carbons with surface area up to 1000 m² g⁻¹, the higher BET surface area the higher specific capacitance (F g⁻¹) for both electrolytes. The surface capacitance (μF cm⁻²) increases also with the mesopore content. The optimum range of mesopore content in terms of the use of ACs studied for EDLCs was found to be between 20 and 50%. A maximum capacitance exceeding 160 F g⁻¹ and a relatively high surface capacitance about 16 μF cm⁻² measured in H₂SO₄ solution were achieved for the AC prepared from a sulfonated subbituminous coal. This study shows that the ACs produced from coals exhibit a better performance as an electrode material of EDLC in H₂SO₄ than in KOH electrolytic solutions. For KOH, the capacitance per unit mesopore surface is slightly lower than that referred to unit micropore surface (9.1 versus 10.1 μF cm⁻²). However, in the case of H₂SO₄ the former capacitance is double and even higher compared with the latter (23.1 versus 9.8 μF cm⁻²). On the other hand, the capacitance per micropore surface area is the same in both electrolytes used, about 10.0 μF cm⁻².     

High-capacitance carbon electrode prepared by PVDC carbonization for aqueous EDLCs

Porous carbons with high-volumetric capacitance in aqueous electric double layer capacitors (EDLCs) were simply prepared by poly(vinylidene chloride) (PVDC) carbonization at high temperature without activation or any other additional processes. The PVDC-derived carbon is microporous with Brunauer-Emmett-Teller (BET) surface area about 1200 m² g⁻¹. As it possesses not only high-gravimetric capacitance (262 F g⁻¹) but also high-electrode density (0.815 g cm⁻³), the PVDC-derived carbon present an outstanding high-volumetric capacitance of 214 F cm⁻³, twice over of the commercial carbon Maxsorb-3 with a high-surface area of 3200 m² g⁻¹. The PVDC-derived carbon also exhibit good rate performance, indicating that it is a promising electrode material for EDLCs.     

Highly mesoporous carbonaceous material of activated carbon beads for electric double layer capacitor

The activated carbon beads (ACB) are prepared by a new preparation method, which is proposed by mixing the coal tar pitch and fumed silica powder at a certain weight ratio and activation by KOH at different weight ratios and different temperatures. The BET surface area, pore volume and average pore size are obtained based on the nitrogen adsorption isotherms at 77 K by using ASAP 2010 apparatus. The results show that our samples have much high specific surface area (SSA) of 3537 m² g⁻¹and high pore volume value of 3.05 cm³ g⁻¹. The percentage of mesopore volume increases with the weight ratio of KOH/ACB ranging from 4% to 72%. The electrochemical double layer capacitors (EDLCs) are assembled with resultant carbon electrode and electrolyte of 1 mol L⁻¹ Et₄NBF₄/PC. The specific capacitance of the ACB sample could be as high as 191.7 F g⁻¹ by constant current charge/discharge technique, indicating that the ACB presents good characteristics prepared by the method proposed in this work. The investigation of influence of carbon porosity structure on capacitance indicates that the SSA plays an important role on the capacitance and all the pore sizes of less than 1 nm, from 1 to 2 nm and larger than 2 nm contribute to the capacitance. Mesopore structure is beneficial for the performance at high current density.     

Polyfurfuryl alcohol derived activated carbons for high power electrical double layer capacitors

Polyfurfuryl alcohol (PFA) derived activated carbons were prepared by the acid catalysed polymerization of furfuryl alcohol, followed by potassium hydroxide activation. Activated carbons with apparent BET surface areas ranging from 1070 to 2600 m² g⁻¹, and corresponding average micropore sizes between 0.6 and 1.6 nm were obtained. The porosity of these carbons can be carefully controlled during activation and their performance as electrode materials in electric double layer capacitors (EDLCs) in a non-aqueous electrolyte (1 M Et₄NBF₄/ACN) is investigated.Carbon materials with a low average pore size (<∼0.6 nm) exhibited electrolyte accessibility issues and an associated decrease in capacitance at high charging rates. PFA carbons with larger average pore sizes exhibited greatly improved performance, with specific electrode capacitances of 150 F g⁻¹ at an operating voltage window of 0-2.5 V; which corresponds to 32 Wh kg⁻¹ and 38 kW kg⁻¹ on an active material basis. These carbons also displayed an outstanding performance at high current densities delivering up to 100 F g⁻¹ at current densities as high as 250 A g⁻¹. The exceptionally high capacitance and power of this electrode material is attributed to its good electronic conductivity and a highly effective combination of micro- and fine mesoporosity.     

Graphene nanosheets as electrode material for electric double-layer capacitors

Graphene nanosheets (GNSs) with narrow mesopore distribution around 4 nm were mass-produced from natural graphite via the oxidation and rapid heating processes. The effects of oxidant addition on the morphology, structure and electrochemical performance of GNSs as electrode materials for electric double-layer capacitor (EDLC) were systematically investigated. The electrochemical properties of EDLC were influenced by the specific surface area, pore characteristics, layer stacking and oxygen-containing functional group contents of electrode materials. Deeper oxidation makes graphite possess both higher specific surface area and more graphene edges, which are favorable for the enhancement of capacitive performance of EDLC. The electrodes with freestanding graphene nanosheets prepared by coating method exhibited good rate capability and reversibility at high scan rates (to 250 mV s⁻¹) in electrochemical performances. GNS electrode with specific surface area of 524 m² g⁻¹ maintained a stable specific capacitance of 150 F g⁻¹ under specific current of 0.1 A g⁻¹ for 500 cycles of charge/discharge.     

Fast and reversible surface redox reaction of graphene-MnO2 composites as supercapacitor electrodes

We present a quick and easy method to synthesize graphene-MnO₂ composites through the self-limiting deposition of nanoscale MnO₂ on the surface of graphene under microwave irradiation. These nanostructured graphene-MnO₂ hybrid materials are used for investigation of electrochemical behaviors. Graphene-MnO₂ composite (78 wt.% MnO₂) displays the specific capacitance as high as 310 F g⁻¹ at 2 mV s⁻¹ (even 228 F g⁻¹ at 500 mV s⁻¹), which is almost three times higher than that of pure graphene (104 F g⁻¹) and birnessite-type MnO₂ (103 F g⁻¹). Interestingly, the capacitance retention ratio is highly kept over a wide range of scan rates (88% at 100 mV s⁻¹ and 74% at 500 mV s⁻¹). The improved high-rate electrochemical performance may be attributed to the increased electrode conductivity in the presence of graphene network, the increased effective interfacial area between MnO₂ and the electrolyte, as well as the contact area between MnO₂ and graphene.     

EDLC performance of carbide-derived carbons in aprotic and acidic electrolytes

This study shows that carbide-derived carbons (CDCs) with average pore size distributions around 0.9-1 nm and effective surface areas of 1300-1400 m² g⁻¹ provide electrochemical double-layer capacitors with high performances in both aqueous (2M H₂SO₄) and aprotic (1M (C₂H₅)₄NBF₄ in acetonitrile) electrolytes.In the acidic electrolytic solution, the gravimetric capacitance at low current density (1 mA cm⁻²) can exceed 200 F g⁻¹, whereas the volumetric capacitance reaches 90 F cm⁻³. In the aprotic electrolyte they reach 150 F g⁻¹ and 60 F cm⁻³.A detailed comparison of the capacitive behaviour of CDCs at high current density (up to 100 mA cm⁻²) with other microporous and mesoporous carbons indicates better rate capabilities for the present materials in both electrolytes. This is due to the high surface area, the accessible porosity and the relatively low oxygen content.It also appears that the surface-related capacitances of the present CDCs in the aprotic electrolyte are in line with other carbons and show no anomalous behaviour.     

Factors influencing MnO2/multi-walled carbon nanotubes composite's electrochemical performance as supercapacitor electrode

Poor crystallined α-MnO₂ grown on multi-walled carbon nanotubes (MWCNTs) by reducing KMnO₄ in ethanol are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and Brunauer-Emmett-Telle (BET) surface area measurement, which indicate that MWCNTs are wrapped up by poor crystalline MnO₂ and BET areas of the composites maintain the same level of 200 m² g⁻¹ as the content of MWCNTs in the range of 0-30%. The electrochemical performances of the MnO₂/MWCNTs composites as electrode materials for supercapacitor are evaluated by cyclic voltammetry (CV) and galvanostatic charge-discharge measurement in 1 M Na₂SO₄ solution. At a scan rate of 5 mV s⁻¹, rectangular shapes could only be observed for the composites with higher MWCNTs contents. The effect of additional conductive agent KS6 on the electrochemical behavior of the composites is also studied. With a fixed carbon content of 25% (MWCNTs included), MnO₂ with 20% MWCNTs and 5% KS6 has the highest specific capacitance, excellent cyclability and best rate capability, which gives the specific capacitance of 179 F g⁻¹ at a scan rate of 5 mV s⁻¹, and remains 114.6 F g⁻¹ at 100 mV s⁻¹.     

Polypyrrole/carbon composite electrode for high-power electrochemical capacitors

Nano-thin polypyrrole (PPy) layers with thickness from ∼5 nm to several 10s nm were deposited on vapor grown carbon fibers (VGCF) by an in situ chemical polymerization. Using different concentrations of the pyrrole could control the thicknesses of deposited PPy layers. Surface morphology and thickness of the deposited PPy layers were confirmed by means of scanning electron microscopy and scanning transmission emission microscopy. Pseudo-capacitive behavior of the deposited PPy layers on VGCF investigated by means of cyclic voltammetry. Then, the PPy/VGCF composites were mixed with activated carbons (AC) at various mixing ratios. For the PPy/VGCF/AC composite electrodes, characteristics of specific capacitance and power capability were examined by half-cell tests. As results of this study, it was investigated that nano-thin PPy layer below ∼10 nm deposited on VGCF had high pseudo-capacitance and fast reversibility. Its specific capacitance per averaged weight of active material (PPy) was obtained as ∼588 F g⁻¹ at 30 mV s⁻¹ and maintained as ∼550 F g⁻¹ at 200 mV s⁻¹ of scan rate. Also, from the mixing 60 wt.% of the PPy/VGCF with 25 wt.% of AC, the PPy/VGCF/AC composite electrode exhibited higher power capability maintaining the specific capacitance per active materials of PPy and AC as ∼300 F g⁻¹ at 200 mV s⁻¹ in 6 M KOH.     

Capacitance behavior of activated carbon fibers with oxygen-plasma treatment

Modified activated carbon fibers (ACFs) were used as the electrodes of an electric double-layer capacitor and showed an enhanced capacitance effect after a RF-plasma treatment. The capacitance and the surface functional groups of the ACFs were studied. For the plasma-treated ACFs having a specific surface area of 1500 m² g⁻¹, the capacitance increased by 28% compared to the untreated sample and the highest electric capacitance value of 142 F g⁻¹ was achieved with an oxygen feed concentration of 10 vol.%. The Brunauer-Emmett-Teller (BET) surface area was 2103 m² g⁻¹, which was 34% higher than that of the untreated sample. The pore volume was similarly increased to 483.1 cm³ g⁻¹ STP, and from the pore distribution plot, quantities of mesopores of 10 nm or less and micropores also increased. However, in order to enhance the capacitance, the quinone functional group had a significant influence in addition to the BET surface area. The correlation between the capacitance and the number of quinone functional groups was confirmed because quinone is an electron acceptor.     

Investigation of polymer electrolyte hybrid supercapacitor based on manganese oxide-carbon electrodes

A hybrid supercapacitor based on manganese oxide, activated carbon and polymer electrolyte was developed and electrochemically investigated. The capacitive performance obtained from the polymer electrolyte based supercapacitor was similar to that of an aqueous electrolyte based supercapacitor, tested for comparison in the same operative conditions. A durability test carried out for 2500 cycles showed stable and slowly increasing performance. The specific capacitance of hybrid supercapacitor was 48 F g⁻¹ (192 F g⁻¹ as a mean one electrode capacitance), in which that of the positive electrode was 384 F g⁻¹ of MnO₂ and that of negative electrode 117 F g⁻¹ of carbon. The impedance analysis evidenced that although the polymer electrolyte based hybrid supercapacitor showed higher resistance compared to that of the liquid electrolyte based supercapacitor, this drawback was counterbalanced by better ion transport features, which were evident at lower frequencies, where similar values of capacitances were obtained from the different supercapacitors.     

Facile solvothermal synthesis of a graphene nanosheet-bismuth oxide composite and its electrochemical characteristics

This work demonstrates a novel and facile route for preparing graphene-based composites comprising of metal oxide nanoparticles and graphene. A graphene nanosheet-bismuth oxide composite as electrode materials of supercapacitors was firstly synthesized by thermally treating the graphene-bismuth composite, which was obtained through simultaneous solvothermal reduction of the colloidal dispersions of negatively charged graphene oxide sheets in N,N-dimethyl formamide (DMF) solution of bismuth cations at 180 °C. The morphology, composition, and microstructure of the composites together with pure graphite oxide, and graphene were characterized using powder X-ray diffraction (XRD), FT-IR, field emission scanning electron microscopy (FESEM), transmission electron microscope (TEM), thermogravimetry and differential thermogravimetry (TG-DTG). The electrochemical behaviors were measured by cyclic voltammogram (CV), galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS). The specific capacitance of 255 F g⁻¹ (based on composite) is obtained at a specific current of 1 A g⁻¹ as compared with 71 F g⁻¹ for pure graphene. The loaded-bismuth oxide achieves a specific capacitance as high as 757 F g⁻¹ even at 10 A g⁻¹. In addition, the graphene nanosheet-bismuth oxide composite electrode exhibits the excellent rate capability and well reversibility.     

Preparation and electrochemical performance of polyaniline-based carbon nanotubes as electrode material for supercapacitor

Nitrogen-containing carbon nanotubes (CNTs) with open end and low specific surface area were prepared via the carbonization of polyaniline (PANI) nanotubes synthesized by a rapidly mixed reaction. On the basis of analyzing the morphologies and structures of the original and carbonized PANI nanotubes, the electrochemical properties of PANI-based CNTs obtained at different temperatures as electrode materials for supercapacitors using 30 wt.% aqueous solution of KOH as electrolyte were investigated by galvanostatic charge/discharge and cyclic voltammetry. It was found that the carbonized PANI nanotubes at 700 °C exhibit high specific capacitance of 163 F g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate capability in KOH solution. Using X-ray photoelectron spectroscopy measurement the nitrogen state and content in PANI-CNTs were analysed, which could play important roles for the enhancement of electrochemical performance. When the appropriate content of nitrogen is present, the presence of pyrrole or pyridone and quaternary nitrogen is beneficial for the improvement of electron mobility and the wettability of electrode.     

Nitrogen-containing microporous carbons prepared from anionic surfactant-melamine/formaldehyde composites

Nitrogen-containing microporous carbons have been synthesized by the carbonization of anionic surfactant-melamine/formaldehyde (MF) composites, which were themselves formed by an electrostatic organic-organic interaction. The carbons prepared from sodium dioctyl sulfosuccinate-MF and sodium dodecyl sulfate-MF mixtures have high surface area of 464 and 539 m² g⁻¹, respectively. The N/C molar ratios of the carbons are 0.11. The resultant carbons showed capacitances higher than 200 F g⁻¹ in an acidic solution of 1 M H₂SO₄ at a scan rate of 1 mV s⁻¹.     

Multiwall carbon nanotube supported poly(3,4-ethylenedioxythiophene)/manganese oxide nano-composite electrode for super-capacitors

MWCNT-PSS/PEDOT/MnO₂ nano-composite electrodes were fabricated by generating pseudo-capacitive poly(3,4-ethylenedioxythiophene) (PEDOT)/MnO₂ nano-structures on poly(styrene sulfonate) (PSS) dispersed multiwalled carbon nanotubes (MWCNTs). PSS dispersed MWCNTs (MWCNT-PSS) facilitated the growth of PEDOT and MnO₂ into nano-rods with large active surface area and good electrical conductivity. The ternary MWCNT-PSS/PEDOT/MnO₂ nano-composite electrode was studied for the application in super-capacitors, and exhibited excellent capacitive behavior between −0.2 V and 0.8 V (vs. saturated Ag/AgCl electrode) with high reversibility. Specific capacitance of the nano-composite electrode was found as high as 375 F g⁻¹. In contrast, specific capacitance of MWCNT-PSS/MnO₂ and MWCNT-PSS nano-composite electrodes is 175 F g⁻¹ and 15 F g⁻¹, respectively. Based on cyclic voltammetric studies and cycle-life tests, the MWCNT-PSS/PEDOT/MnO₂ nano-composite electrode gave a highly stable and reversible performance up to 2000 cycles. Our studies demonstrate that the synergistic combination of MWCNT-PSS, PEDOT and MnO₂ has advantages over the sum of the individual components.     

Electrical double-layer characteristics of novel carbide-derived carbon materials

A variety of nanoporous carbide-derived carbon materials possessing improved pore size distributions were synthesised from a mixture of titanium carbide and titanium dioxide. It was observed that TiO₂ caused partial oxidation of the carbon particles created during high-temperature chlorination of the TiC/TiO₂ mixture. The resulting carbon powder is characterised by narrow pore size distribution with a peak pore size of around 8 Å and a noticeably smaller amount of pores below 6-7 Å compared to the carbon derived from pure TiC. Electrochemical and electrical double-layer characteristics of novel carbon materials in the acetonitrile solution of triethylmethylammonium tetrafluoroborate were obtained by using cyclic voltammetry and constant current methods. Carbon electrode materials of this study were tested over the temperature range from −10 °C to +60 °C. Results of this study affirmed a great potential of the synthesised advanced carbide-derived carbon, whose specific double-layer capacitance reaches approximately 90 F cm⁻³ and 125 F g⁻¹.     

Morphology and organic EDLC applications of chemically activated AR-resin-based carbons

A morphological characterization of activated AR-resin was carried out. The time and temperature effect of the EDLC (electric double layer capacitor) properties of AR-resin were investigated. In order to clarify the relation between the electric double layer capacitance and the ion mobility in the organic solvent, a computer simulation was used to calculate the possible solvation size of Et₄NBF₄ in propylene carbonate. The sample (HTT 700) activated at a heat treatment temperature (HTT) of 700 °C for 2 h has a specific capacitance as high as 35.27 F g⁻¹ (equivalent to 141.08 F g⁻¹ for a single electrode), when it is charged to 2.5 V and discharged at 1 mA cm⁻². The capacitance increase by using a longer activation time at each HTT was as follows: 2.3 times at HTT 600, 1.6 times at HTT 700, 1.3 times at HTT 800 and 1.2 times at HTT 900. This variation could be forecast from image analysis using a TEM photograph. Furthermore, a possible ion size of electrolyte (Et₄NBF₄) in a solvent was calculated and it is related to the mobility of charge carriers in a micropore.     

Synthesis of nanosized vanadium pentoxide/carbon composites by spray pyrolysis for electrochemical capacitor application

Nanostructured vanadium pentoxide/carbon (V₂O₅/carbon) composite powders with enhanced specific capacitance were synthesized by the spray pyrolysis technique. Electrochemical properties were examined by the cyclic voltammetry technique. Following analysis of powders sprayed at different temperatures, composite powders obtained at an optimum temperature of 450 °C yielded a maximum specific capacitance of 295 F g⁻¹ in 2 M KCl electrolyte at a 5-mV s⁻¹ scan rate. The weight percentage of carbon-related species was 2.7 wt% in this V₂O₅/carbon composite, as detected by thermogravimetric analysis (TGA) and confirmed by transmission electron microscope energy dispersive spectroscopy (TEM-EDS) analysis. Following initial X-ray diffraction (XRD) characterization, scanning electron microscope (SEM), TEM and high-resolution TEM (HRTEM) imaging revealed a specific morphology of spherical shell agglomerates of V₂O₅ nanorods and nanoribbons, with each shell comprising a network of these one- and two-dimensional nanoparticles in an amorphous carbon matrix. The V₂O₅ network was not fully dense, and the majority of the nanorod sizes were in the range of 50-150 nm, with additional long nanoribbons extending from the outsides of the spherical shells. The specific surface area was 18 m² g⁻¹ for the composite powders, and the pore size distribution revealed that the majority of pores had diameters in the range of 40-50 Å, which was relatively larger than the pore diameters obtained at 500 °C and would be beneficial for electrochemical performance. The enhancement of the specific capacitance in V₂O₅/carbon composites was attributed to the distribution of amorphous carbon throughout the V₂O₅ and the particular open nanostructure.