Double heterojunction bipolar transistor in Al/sub x/Ga/sub 1-x/As/GaAs/sub 1-y/Sb/sub y/ system

Double heterojunction bipolar transistors based on the Al/sub x/Ga/sub 1-x/As/GaAs/sub 1-y/Sb/sub y/ system are examined. The base layer consists of narrow band gap GaAs/sub 1-y/Sb/sub y/ and the emitter and collector consist of wider band gap Al/sub x/Ga/sub 1-x/As. Preliminary experimental results show that AlGaAs/GaAsSb/GaAs DHBTs exhibit a current gain of five and a maximum collector current density of 5*10/sup 4/ A/cm/sup 2/.<>     

Effect of strain on microwave noise characteristics in In/sub 0.52/Al/sub 0.48/As/In/sub x/Ga/sub 1-x/As (0.53

Chough  K.B. Hong  W.-P. Florez  L. Song  J.I. 《Electronics letters》1993,29(15):1338-1340

High-performance, metamorphic In/sub x/Ga/sub 1-x/As tunnel diodes grown by molecular beam epitaxy

Thin In/sub x/Ga/sub 1-x/As tunnel junction diodes having compositions from x=0.53 to 0.75 that span a range of bandgap energies from 0.74 to 0.55 eV, were grown on InP and metamorphic, step-graded In/sub x/Al/sub 1-x/As/InP substrates using molecular beam epitaxy and evaluated in the context of thermophotovoltaic (TPV) applications. Both carbon and beryllium were investigated as acceptor dopants. Metamorphic tunnel diodes with a bandgap of 0.60 eV (x=0.69) using carbon acceptor doping displayed highest peak current densities, in excess of 5900 A/cm/sup 2/ at a peak voltage of 0.31 V, within a 200 /spl Aring/ total thickness tunnel junction. Identically doped lattice-matched tunnel diodes with a bandgap of 0.74 eV exhibited lower peak current densities of approximately 2200 A/cm/sup 2/ at a higher peak voltage of 0.36 V, consistent with the theoretical bandgap dependence expected for ideal tunnel diodes. Specific resistivities of the 0.60 eV bandgap devices were in the mid-10/sup -5/ /spl Omega/-cm/sup 2/ range. Together with their 200 /spl Aring/ total thickness, the electrical results make these tunnel junctions promising for TPV applications where low-resistance, thin metamorphic tunnel junctions are desired.     

A novel InGaP/Al/sub x/Ga/sub 1-x/As/GaAs CEHBT

A new and interesting InGaP/Al/sub x/Ga/sub 1-x/As/GaAs composite-emitter heterojunction bipolar transistor (CEHBT) is fabricated and studied. Based on the insertion of a compositionally linear graded Al/sub x/Ga/sub 1-x/As layer, a near-continuous conduction band structure between the InGaP emitter and the GaAs base is developed. Simulation results reveal that a potential spike at the emitter/base heterointerface is completely eliminated. Experimental results show that the CEHBT exhibits good dc performances with dc current gain of 280 and greater than unity at collector current densities of J/sub C/=21kA/cm/sup 2/ and 2.70/spl times/10/sup -5/ A/cm/sup 2/, respectively. A small collector/emitter offset voltage /spl Delta/V/sub CE/ of 80 meV is also obtained. The studied CEHBT exhibits transistor action under an extremely low collector current density (2.7/spl times/10/sup -5/ A/cm/sup 2/) and useful current gains over nine decades of magnitude of collector current density. In microwave characteristics, the unity current gain cutoff frequency f/sub T/=43.2GHz and the maximum oscillation frequency f/sub max/=35.1GHz are achieved for a 3/spl times/20 /spl mu/m/sup 2/ device. Consequently, the studied device shows promise for low supply voltage and low-power circuit applications.     

Characteristics of In/sub x/Al/sub 1-x/N-GaN high-electron mobility field-effect transistor

GaN-based field effect transistors commonly include an Al/sub x/Ga/sub 1-x/N barrier layer for confinement of a two-dimensional electron gas (2DEG) in the barrier/GaN interface. Some of the limitations of the Al/sub x/Ga/sub 1-x/N-GaN heterostructure can be, in principle, avoided by the use of In/sub x/Al/sub 1-x/N as an alternative barrier, which adds flexibility to the engineering of the polarization-induced charges by using tensile or compressive strain through varying the value of x. Here, the implementation and electrical characterization of an In/sub x/Al/sub 1-x/-GaN high electron mobility transistor with Indium content ranging from x=0.04 to x=0.15 is described. The measured 2DEG carrier concentration in the In/sub 0.04/Al/sub 0.96/N-GaN heterostructure reach 4/spl times/10/sup 13/ cm/sup -2/ at room temperature, and Hall mobility is 480 and 750 cm/sup 2//V /spl middot/ s at 300 and 10 K, respectively. The increase of Indium content in the barrier results in a shift of the transistor threshold voltage and of the peak transconductance toward positive gate values, as well as a decrease in the drain current. This is consistent with the reduction in polarization difference between GaN and In/sub x/Al/sub 1-x/N. Devices with a gate length of 0.7 /spl mu/m exhibit f/sub t/ and f/sub max/ values of 13 and 11 GHz, respectively.     

Ultralow leakage In/sub 0.53/Ga/sub 0.47/As p-i-n photodetector grown on linearly graded metamorphic In/sub x/Ga/sub 1-x/P buffered GaAs substrate

A novel top-illuminated In/sub 0.53/Ga/sub 0.47/As p-i-n photodiodes (MM-PINPD) grown on GaAs substrate by using linearly graded metamorphic In/sub x/Ga/sub 1-x/P (x graded from 0.49 to 1) buffer layer is reported. The dark current, optical responsivities, noise equivalent power, and operational bandwidth of the MM-PINPD with aperture diameter of 60 /spl mu/m are 13 pA, 0.6 A/W, 3.4/spl times/10/sup -15/ W/Hz/sup 1/2/, and 7.5 GHz, respectively, at 1550 nm. The performances of the MM-PINPD on GaAs are demonstrated to be comparable to those of a similar device made on InGaAs-InP substrate.     

The microwave power performance comparisons of Al/sub x/Ga/sub 1-x/As/In/sub 0.15/Ga/sub 0.85/As (x=0.3, 0.5, 0.7, 1.0) doped-channel HFETs

The properties of doped-channel field-effect transistors (DCFET) have been thoroughly investigated on Al/sub x/Ga/sub 1-x/As/InGaAs (x= 0.3, 0.5, 0.7, 1) heterostructures with various Al mole fractions. In this study, we observed that by introducing a 200-/spl Aring/-thick Al/sub 0.5/Ga/sub 0.5/As (x=0.5) Schottky layer can enhance the device power performance, as compared with the conventional x=0.3 AlGaAs composition system. However, a degradation of the device power performance was observed for further increasing the Al mole fractions owing to their high sheet resistance and surface states. Therefore, Al/sub 0.5/Ga/sub 0.5/As Schottky layer design provides a good opportunity to develop a high power device for power amplifier applications.     

Study of nickel silicide contact on Si/Si/sub 1-x/Ge/sub x/

The properties of nickel silicide formed by depositing nickel on Si/p/sup +/-Si/sub 1-x/Ge/sub x/ layer are compared with that of nickel germanosilicide on p/sup +/-Si/sub 1-x/Ge/sub x/ layer formed by depositing Ni directly on p/sup +/-Si/sub 1-x/Ge/sub x/ layer without silicon consuming layer. After thermal annealing, nickel silicide on Si/p/sup +/-Si/sub 1-x/Ge/sub x/ layer shows lower sheet resistance and specific contact resistivity than that of nickel germanosilicide on p/sup +/-Si/sub 1-x/Ge/sub x/ layer. In addition, small junction leakage current is also observed for nickel silicide on a Si/p/sup +/-Si/sub 1-x/Ge/sub x//n-Si diode. In summary, with a Si consuming layer on top of the Si/sub 1-x/Ge/sub x/, the nickel silicide contact formed demonstrated improved electrical and materials characteristics as compared with the nickel germanosilicide contact which was formed directly on the Si/sub 1-x/Ge/sub x/ layer.     

Turn-on voltage investigation of GaAs-based bipolar transistors with Ga/sub 1-x/In/sub x/As/sub 1-y/N/sub y/ base layers

The fundamental lower limit on the turn on voltage of GaAs-based bipolar transistors is first established, then reduced with the use of a novel low energy-gap base material, Ga/sub 1-x/In/sub x/As/sub 1-y/N/sub y/. InGaP/GaInAsN DHBTs (x/spl sim/3y/spl sim/0.01) with high p-type doping levels (/spl sim/3/spl times/10/sup 19/ cm/sup -3/) and dc current gain (/spl beta//sub max//spl sim/68 at 234 /spl Omega///spl square/) are demonstrated. A reduction in the turn-on voltage over a wide range of practical base sheet resistance values (100 to 400 /spl Omega///spl square/) is established relative to both GaAs BJTs and conventional InGaP/GaAs HBTs with optimized base-emitter interfaces-over 25 mV in heavily doped, high dc current gain samples. The potential to engineer turn-on voltages comparable to Si- or InP-based bipolar devices on a GaAs platform is enabled by the use of lattice matched Ga/sub 1-x/In/sub x/As/sub 1-y/N/sub y/ alloys, which can simultaneously reduce the energy-gap and balance the lattice constant of the base layer when x/spl sim/3y.     

Performance improvement in tensile-strained In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As metamorphic HEMT

This paper proposes a In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As (x=0.3-0.5-0.3) metamorphic high-electron mobility transistor with tensile-strained channel. The tensile-strained channel structure exhibits significant improvements in dc and RF characteristics, including extrinsic transconductance, current driving capability, thermal stability, unity-gain cutoff frequency, maximum oscillation frequency, output power, power gain, and power added efficiency.     

Optimized breakdown probabilities in Al/sub 0.6/Ga/sub 0.4/As-GaAs heterojunction avalanche photodiodes

Recently, it has been shown that the noise characteristics of heterojunction Al/sub 0.6/Ga/sub 0.4/As-GaAs avalanche photodiodes (APDs) can be optimized by proper selection of the width of the Al/sub 0.6/Ga/sub 0.4/As layer. Similar trends have also been shown theoretically for the bandwidth characteristics. The resulting noise reduction and potential bandwidth enhancement have been attributed to the fact that the high bandgap Al/sub 0.6/Ga/sub 0.4/As layer serves to energize the injected electrons, thereby minimizing their first dead space in the GaAs layer. We show theoretically that the same optimized structures yield optimal breakdown-probability characteristics when the APD is operated in Geiger mode. The steep breakdown-probability characteristics, as a function of the excess bias, of thick multiplication regions (e.g., in a 1000-nm GaAs homojunction) can be mimicked in much thinner optimized Al/sub 0.6/Ga/sub 0.4/As-GaAs APDs (e.g., in a 40-nm Al/sub 0.6/Ga/sub 0.4/As and 200-nm GaAs structure) with the added advantage of having a reduced breakdown voltage (e.g., from 36.5 V to 13.7 V).     

10-gb/s operation of an In/sub 0.53/Ga/sub 0.47/As p-i-n photodiode on metamorphic InGaP buffered semi-insulating GaAs substrate

The SONET OC-192 receiving performance of In/sub 0.53/Ga/sub 0.47/As p-i-n photodiode grown on linearly graded metamorphic In/sub x/Ga/sub 1-x/P buffered GaAs substrate is reported. With a low-cost TO-46 package, such a device exhibits a frequency bandwidth up to 8 GHz, a bit-error rate (BER) of 10/sup -9/ at 10 Gb/s, a sensitivity of -17.8 dBm, and a noise equivalent power of 3.4/spl times/10/sup -15/ W/Hz/sup 1/2/ owing to its ultralow dark current of 3.6/spl times/10/sup -7/ A/cm/sup 2/. Eye diagram analysis at 10 Gb/s without transimpedance amplification reveals a statistically distributed Q-factor of 8.21, corresponding to a minimum BER of 1.1/spl times/10/sup -16/ at receiving power of -6 dBm.     

Negative differential resistance of GaAs/Al/sub x/Ga/sub 1-x/As multiquantum well structures under high power photoexcitation: structure optimisation for an oscillator

A study is presented of the photocurrent behaviour of p-i-n diodes having GaAs/Al/sub x/Ga/sub 1-x/As MQW absorption regions for varying incident power, incident wavelength and barrier height, given by the Al fraction x. Optimum results for applications in high power oscillators are expected to be obtained for 0.1>     

Thermal stability of Al/AlGaAs and Al/GaAs/AlGaAs (MBE) Schottky barriers

Outstanding stability has been observed in Al/Al/sub x/Ga/sub 1-x/As and Al/GaAs/Al/sub x/Ga/sub 1-x/As (x=0.25) Schottky barriers prepared by depositing Al in situ by MBE on annealing up to 400 degrees C. Conventionally evaporated barriers have been fabricated and compared with epitaxial ones. The changes in barrier height and ideality factor induced by annealing are reported.<>     

MIM capacitors using atomic-layer-deposited high-/spl kappa/ (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ dielectrics

Metal-insulator-metal (MIM) capacitors with (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ high-/spl kappa/ dielectric films were investigated for the first time. The results show that both the capacitance density and voltage/temperature coefficients of capacitance (VCC/TCC) values decrease with increasing Al/sub 2/O/sub 3/ mole fraction. It was demonstrated that the (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ MIM capacitor with an Al/sub 2/O/sub 3/ mole fraction of 0.14 is optimized. It provides a high capacitance density (3.5 fF//spl mu/m/sup 2/) and low VCC values (/spl sim/140 ppm/V/sup 2/) at the same time. In addition, small frequency dependence, low loss tangent, and low leakage current are obtained. Also, no electrical degradation was observed for (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ MIM capacitors after N/sub 2/ annealing at 400/spl deg/C. These results show that the (HfO/sub 2/)/sub 0.86/(Al/sub 2/O/sub 3/)/sub 0.14/ MIM capacitor is very suitable for capacitor applications within the thermal budget of the back end of line process.     

High peak-to-valley current ratio AlGaAs/AlAs/GaAs double barrier resonant tunnelling diodes

A double barrier resonant tunnelling diode with the highest room temperature peak-to-valley current ratio using Al/sub x/Ga/sub 1-x/As/GaAs quantum wells is reported. Room temperature peak-to-valley ratios of 6.3 were obtained using an Al/sub 0.2/Ga/sub 0.8/As 'chair' barrier. Peak current density for these diodes was typically 30 kA/cm/sup 2/.<>     

Low-frequency noise in submicrometer MOSFETs with HfO/sub 2/, HfO/sub 2//Al/sub 2/O/sub 3/ and HfAlO/sub x/ gate stacks

Low-frequency noise measurements were performed on p- and n-channel MOSFETs with HfO/sub 2/, HfAlO/sub x/ and HfO/sub 2//Al/sub 2/O/sub 3/ as the gate dielectric materials. The gate length varied from 0.135 to 0.36 /spl mu/m with 10.02 /spl mu/m gate width. The equivalent oxide thicknesses were: HfO/sub 2/ 23 /spl Aring/, HfAlO/sub x/ 28.5 /spl Aring/ and HfO/sub 2//Al/sub 2/O/sub 3/ 33 /spl Aring/. In addition to the core structures with only about 10 /spl Aring/ of oxide between the high-/spl kappa/ dielectric and silicon substrate, there were "double-gate oxide" structures where an interfacial oxide layer of 40 /spl Aring/ was grown between the high-/spl kappa/ dielectric and Si. DC analysis showed low gate leakage currents in the order of 10/sup -12/A(2-5/spl times/10/sup -5/ A/cm/sup 2/) for the devices and, in general, yielded higher threshold voltages and lower mobility values when compared to the corresponding SiO/sub 2/ devices. The unified number-mobility fluctuation model was used to account for the observed 1/f noise and to extract the oxide trap density, which ranged from 1.8/spl times/10/sup 17/ cm/sup -3/eV/sup -1/ to 1.3/spl times/10/sup 19/ cm/sup -3/eV/sup -1/, somewhat higher compared to conventional SiO/sub 2/ MOSFETs with the similar device dimensions. There was no evidence of single electron switching events or random telegraph signals. The aim of this paper is to present a general discussion on low-frequency noise characteristics of the three different high-/spl kappa//gate stacks, relative comparison among them and to the Si--SiO/sub 2/ system.     

Investigation of the impact of Al mole-fraction on the consequences of RF stress on Al/sub x/Ga/sub 1-x/N/GaN MODFETs

Variations of the low-frequency noise (LFN), power, and dc characteristics of a variety of SiN/sub x/ passivated AlGaN/GaN MODFETs with different values of Al mole-fraction, gate length, and gate drain spacing upon RF stress are investigated. It is experimentally evidenced that the variation of Al mole-fraction (x) of the barrier Al/sub x/Ga/sub 1-x/N layer from 0.2 to 0.4, has no considerable impact on the drain and gate low-frequency noise current characteristics. The most noticeable variation on the device characteristics upon long-term RF stressing has been on the pinch-off voltage. Although no material degradation by increasing the Al mole-fraction has been evidenced through the low-frequency noise data, it is observed that the variation of pinch-off voltage upon RF stressing becomes more important as the Al mole-fraction increases.     

Low-frequency noise in submicrometer MOSFETs with HfO/sub 2/, HfO/sub 2//Al/sub 2/O/sub 3/ and HfAlO/sub x/ gate stacks

Low-frequency noise measurements were performed on p- and n-channel MOSFETs with HfO/sub 2/, HfAlO/sub x/ and HfO/sub 2//Al/sub 2/O/sub 3/ as the gate dielectric materials. The gate length varied from 0.135 to 0.36 /spl mu/m with 10.02 /spl mu/m gate width. The equivalent oxide thicknesses were: HfO/sub 2/ 23 /spl Aring/, HfAlO/sub x/ 28.5 /spl Aring/ and HfO/sub 2//Al/sub 2/O/sub 3/ 33 /spl Aring/. In addition to the core structures with only about 10 /spl Aring/ of oxide between the high-K dielectric and silicon substrate, there were "double-gate oxide" structures where an interfacial oxide layer of 40 /spl Aring/ was grown between the high-K dielectric and Si. DC analysis showed low gate leakage currents in the order of 10/sup -12/ A(2-5 /spl times/ 10/sup -5/ A/cm/sup 2/) for the devices and, in general, yielded higher threshold voltages and lower mobility values when compared to the corresponding SiO/sub 2/ devices. The unified number-mobility fluctuation model was used to account for the observed 1/f noise and to extract the oxide trap density, which ranged from 1.8 /spl times/ 10/sup 17/ cm/sup -3/ eV/sup -1/ to 1, 3 /spl times/ 10/sup 19/ cm/sup -3/ eV/sup -1/ somewhat higher compared to conventional SiO/sub 2/ MOSFETs with the similar device dimensions. There was no evidence of single electron switching events or random telegraph signals. The aim of this paper is to present a general discussion on low-frequency noise characteristics of the three different high-K/gate stacks, relative comparison among them and to the Si-SiO/sub 2/ system.     

Low-temperature MBE-grown In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As/InP optical waveguides

The MBE growth of In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As ( lambda /sub g/=1.06 mu m) layers in the temperature range of 400-450 degrees C was demonstrated to give high-quality optical waveguides which not only exhibit low propagation losses as low as 0.5 dB/cm at lambda =1.55 mu m but concomitantly high resistivity of >10/sup 4/ Omega cm. The refractive index of In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As was estimated to be 3.207+or-0.03 at lambda =1.55 mu m.<>