共查询到18条相似文献,搜索用时 156 毫秒
1.
对叔丁基杯[6]芳烃是杯芳烃的一种基本原料,而杯芳烃由于其环腔大小可调,可进行多种化学修饰等特点,从而有模拟酶催化、传输、分离与富集等方面具有广阔的应用前景,目前大多数杯[6]芳烃的衍生物都是以从对叔丁基杯[6]芳烃出发经适当步骤进行合成的,因而能够以高产率得到对叔丁基杯[6]芳烃具有重要意义。经多年摸索与研究,Gutsche等人将对叔丁基杯芳烃其产率提高到80%以上,但实验方法不易掌握、不易重复,而且和得到的粗产品中往往含有一定量的对叔丁基杯[8]芳烃、对叔丁基杯[4]芳烃等副产品,因而在重结晶纯化以后导致对叔丁基杯[6]芳烃的产… 相似文献
2.
3.
4.
杯芳烃/聚丙烯共混体系耐热氧性能的研究 总被引:2,自引:0,他引:2
合成了对叔丁基杯[4]、杯[6]、杯[8]芳烃,并用热重法和烘箱老化评价了共混体系的耐热氧性能。结果表明,杯芳烃能明显提高聚丙烯的耐热氧性能,其耐热氧能力为:对叔丁基杯[6]芳烃>对叔丁基杯[4]<2,6-二叔丁基-4-甲基苯酚。 相似文献
5.
以对叔丁基杯[4]芳烃为原料,与1,2-二溴乙烷反应得到25,27-二(2-溴乙氧基)-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃,分别与苯佐卡因、三卡因、盐酸普鲁卡因在K2CO3、Na I/DMF体系中反应,以48%~63%的产率合成了3种新型含氨基苯甲酸酯结构的杯[4]芳烃衍生物——25,27-二(2-(对乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃、25,27-二(2-(3-乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃和25,27-二(2-(4-(2-(二乙基氨基))乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃。新化合物的结构与构象经元素分析、IR、1HNMR表征证实。研究它们对K+、Pb2+等9种金属离子的萃取性能以及对氨基酸的分子识别作用。结果表明,新型杯[4]芳烃衍生物对过渡金属离子具有良好的萃取效果,对Fe2+、Cu2+、Pb2+、Zn2+、Ag+的萃取率高达90%以上;同时与氨基酸也能发生很好的配合作用,能有效地识别氨基酸,对带芳环的氨基酸比脂肪氨基酸的识别效果更好。 相似文献
6.
对叔丁基杯[4]芳烃与对甲苯磺酸酯基乙氧基对苯甲醛反应生成对叔丁基杯[4]芳烃-1,3-二醛基衍生物1,对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与金刚烷胺进行分子间缩合反应得到含金刚烷基的新型杯[4]芳烃衍生物,并利用1H NMR,13C NMR,MS和元素分析对目标化合物的结构进行了表征。初步的抗菌试验表明,该化合物表现出较好的抑菌活性。 相似文献
7.
通过考察对叔丁基杯[4]芳烃乙酸,以及与其它萃取剂形成酸加酸、酸加碱、酸加中性混合萃取剂对磷酸二氢铵溶液中Mg2+萃取分配比的影响,选出萃取Mg2+的适宜萃取剂对叔丁基杯[4]芳烃乙酸;通过考察杯芳烃及其衍生物分子结构同,研究了对叔丁基杯[4]芳烃乙酸从磷酸二氢铵溶液中萃取Mg2+的反应机理,通过考察溶液pH值对萃取平衡分配比的影响,证明了对叔丁基杯[4]芳烃乙酸萃取Mg2+符合阳离子交换机理;通过考察反应温度对分配比的影响,求得了萃取热焓为16.23 kJ·mol-1,自由能为-31.24 kJ·mol-1和熵变为138.40 kJ·mol-1·K-1.同时考察了萃取剂初始浓度、水相Mg2+浓度、相比等影响因素对萃取分配比的影响,得到了萃取Mg2+的适宜工艺条件;经用实际湿法磷酸的氨中和液实验,结果表明,在最佳工艺条件下,经过二级萃取,就可以制取优品级NH4H2PO4(MAP). 相似文献
8.
对叔丁基杯[4]芳烃与对甲苯磺酸酯基乙氧基对苯甲醛反应生成对叔丁基杯[4]芳烃-1,3-二醛基衍生物1,对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与金刚烷甲酰肼进行分子间缩合反应得到含杯[4]芳烃的金刚烷甲酰腙化合物2,并利用1H NMR,13C NMR,MS和元素分析对目标化合物的结构进行了表征。初步的抗菌试验表明,该化合物表现出较好的抗菌活性。 相似文献
9.
10.
以4-(N,N-二乙氧酰甲基)氨基苯甲醛和邻苯二胺为原料,首先得到了2-[4-N,N-二(乙氧酰甲基)氨基苯基]-1H-苯并咪唑。再将得到的苯并咪唑与5,11,17,23-四叔丁基-26,28-二羟基-25,27-二丁氧基杯[4]芳烃反应,合成了含氨基乙酸酯苯并咪唑杯[4]芳烃荧光分子探针L,并采用红外和核磁对所合成的化合物进行了结构表征和确认。通过紫外和荧光光谱实验研究表明,探针L在甲醇溶液中对Al3+具有选择性识别性能,且不受其他金属离子的干扰;当Al3+物质的量浓度增加到探针浓度的5倍时,探针L的荧光强度降低到最低值。Job's曲线确定了探针与Al3+之间形成物质的量比为1∶1的金属配合物。 相似文献
11.
12.
13.
Seven kinds of poly(methyl methacrylate) (PMMA) films doped with [60]fullerene or its inclusion complex of p‐tert‐butylcalix[8]arene were prepared and characterized by FTIR, UV‐vis, TG, and DSC. It was found that the thermal stability of PMMA is much improved by doping with the inclusion complex in comparison with [60]fullerene itself, that is, the inclusion complex retards the thermal depolymerization of PMMA very effectively. The influence of incorporating active carbon powder or calix[8]arene on the thermal stability of PMMA was also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1549–1552, 2002 相似文献
14.
15.
16.
Polyaniline (PANI) molecular composites were synthesized by chemical oxidative polymerization of the aniline and aniline dimer, N‐phenyl‐1,4‐phenylendiamine, in the presence of a macrocycle, calix[8]arene p‐octasulfonic acid (C8S), using ammonium peroxidisulfate as oxidant. The macrocycle has acted both as acid dopant and surfactant to obtain processable PANI‐ES. The PANI/calix[8]arene p‐octasulfonic acid composite was also obtained by a simple doping of PANI emeraldine base form with calix[8]arene sulfonic acid. The structure of materials was confirmed by Fourier transform infrared, UV–vis and nuclear magnetic resonance spectroscopy. All synthesized composite materials are amorphous and soluble in chloroform, dimethylsulfoxide, NMP, showing excellent solution‐processing properties combined with electrical conductivity. Cyclic voltammetry evidenced a good electroactivity for the composite films. Dielectric properties (dielectric constant and dielectric losses) were determined and are comparable with those of other PANI/ionic acid polymer composites. Preliminary studies have evidenced a high dielectric constant (104 at 100 Hz) and electrical conductivity of 6 × 10?3 S/cm for PANI composites. From sulfur elemental analysis of the PANI/calixarene, it results that the content in macrocycle is ~30% (weight). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 相似文献
17.
18.
Guofang Zhang Chunyan Wang Ting An Fengqi Zhao Xuezhong Fan 《Propellants, Explosives, Pyrotechnics》2014,39(6):802-808
Six copper(II) and lead(II) salts of p‐nitrocalix[n]arene (n=4, 6, 8) were synthsized and characterized. The DSC curves of all salts showed exothermic decomposition. Sensitivity studies revealed that all the salts with the exception of the lead salt of p‐nitrocalix[6]arene (NCPb6) are relatively insensitive materials. Investigations of the catalytic activities showed that most of the salts displayed high activities in thermal decomposition of NC‐NG and RDX. As evaluated in this work, the salts enhanced the burning rates of both double base (DB) and RDX‐component modified double base propellants. The best catalytic effect was obtained with NCPb6, which increased the burning rate of the DB propellant to the order of about 200 % (2–6 MPa) and 103–198 % (8–20 MPa) while decreasing the pressure index (n) to 0.22 (20–22 MPa). 相似文献