具有陷波功能的超宽带缝隙天线的设计与研究

提出了一种具有陷波功能与分形调谐支节的新型超宽带缝隙天线.该天线的结构类似于一般的微带缝隙天线,通过采用分形调谐支节引入半波长谐振结构,使得该天线不仅具备了超宽带缝隙天线的优点,还具备灵活可调的陷波功能.通过计算、测量和尺度放大实验,充分考察了天线的频域特性.实验结果表明该天线的工作频带为2.66～10.76 GHz,在4.95～5.85 GHz频段上具有陷波功能,同时具有相对稳定的辐射方向性和近似的全向特性.该研究对设计小型超宽带天线具有一定的价值.     

Frequency notched ultra-wideband microstrip slot antenna with fractal tuning stub

A frequency notched ultra-wideband (UWB) microstrip slot antenna with a fractal tuning stub is proposed. The antenna is similar to a conventional microstrip slot antenna, and by introducing a fractal tuning stub, frequency notched function is achieved. The antenna was studied experimentally regarding impedance bandwidth, radiation patterns and gain. The operation bandwidth of the antenna is from 2.66 to 10.76 GHz, in which a frequency notched band from 4.95 to 5.85 GHz was achieved, along with good radiation performance over the entire frequency range.     

Controllable Band‐Notched Slot Antenna for UWB Communication Systems

We propose a slot antenna consisting of a rectangular slot on the ground plane, fed by a microstrip line with a rectangular‐ring‐shaped tuning stub that can be deployed in ultra‐wideband (UWB) communication systems to avoid interference with wireless local area network (WLAN) communication. Our antenna can achieve a single band‐notched property from the 5 GHz frequency to the 6 GHz frequency owing to a controllable band notch that uses L‐ and J‐shaped parasitic elements. The antenna characteristics can be modified to tune the band‐notched property (4 GHz to 5 GHz or 6 GHz to 7 GHz) and the bandwidth of the band notch (1 GHz to 2 GHz). Furthermore, the shifted notch with enhanced width of the band notch from 1 GHz to 1.5 GHz is described in this paper. The UWB slot antenna and L‐ and J‐shaped parasitic elements also provide the band‐rejection function for reference in the WiMAX (3.5 GHz) and WLAN (5 GHz to 6 GHz) regions of the spectrum. Experiment results evidence the return loss performance, radiation patterns, and antenna gains at different operational frequencies.     

Frequency notched printed slot antenna with parasitic open-circuit stub

A new frequency notched ultra-wideband microstrip slot antenna with a parasitic tuning stub is proposed. The antenna is similar in configuration to a conventional microstrip slot antenna; by introducing a parasitic open-circuit tuning stub, flexible frequency notched function is achieved. Several properties of the antenna, such as frequency notched function, antenna transfer function and gain, have been investigated. As is reported, the operation bandwidth of the antenna is 2.91-11.16 GHz, in which a frequency notched band of 5.10-5.85 GHz has been achieved. Furthermore, good ultra-wideband linear transmission performance over the entire operation frequency range has also been achieved.     

Improved U-shaped stub rectangular slot antenna with tuning pad for UWB applications

An improved design of the U-shaped stub rectangular slot antenna with a tuning pad for enhancing the impedance bandwidth is proposed. By properly tuning the physical size of the copper pad, a wide impedance bandwidth of the antenna can be achieved for UWB applications. For 10 dB return loss, a impedance bandwidth of the antenna is covered from 2.3 to 12 GHz (135.7%). A gain variation from 2 to 6.82 dBi is obtained.     

一种双频双圆极化共面波导馈电缝隙天线

一种新型加载两个开口环形接地导带的双频共面波导（CPW）馈电缝隙天线,被提出来实现双旋向圆极化辐射。从天线信号带伸入槽隙的水平矩形调谐短截线用于改善频带内的阻抗和轴比。对天线进行仿真和实物测量。实验结果表明,该天线的10 dB 回波损耗阻抗带宽分别是,在1.55 GHz 频段为27.69％（1.4~1.85 GHz）,在2.55 GHz频段为26.17％（2.075~2.7 GHz）。在1.55 GHz的频段和2.55 GHz频段所测量的3 dB轴比带宽分别是20.51％（1.4~1.72 GHz）和13.44％（2.36~2.7 GHz）。其辐射极化方向分别是低频段右旋圆极化和高频段左旋圆极化,天线在两频段内的峰值增益分别是3.69 dB和3.81 dB。实物测试结果与仿真结果基本吻合。     

Improved Frequency Notched Ultrawideband Slot Antenna Using Square Ring Resonator

An improved frequency notched ultrawideband (UWB) microstrip slot antenna with a square ring resonator embedded in the tuning stub is proposed. The antenna is investigated numerically and experimentally for its impedance matching property, frequency notched characteristic and radiation performance in detail. As will be reported, compared with conventional frequency notched slot antennas, after incorporating a square ring resonator with the slot antenna's tuning stub, high, sharp band-rejection characteristic of over 20 dB is achieved, which is improved significantly.     

Frequency notched wide slot antenna for UWB/2.4 GHz WLAN applications

A compact frequency notched microstrip slot antenna for ultra-wideband (UWB) /2.4 GHz-band wireless local area network (WLAN) applications is proposed. The antenna is similar to a conventional microstrip slot antenna; however, by introducing a cross wide slot and a meandered-slotted stub, both compact size and frequency notched function can be achieved. It has been studied both numerically and experi- mentally for its impedance bandwidth, surface current distribution, radiation patterns, and gain. As will be seen, an operation bandwidth of over 4.61 ranging from 2.39 to 11.25 GHz for return loss lower than having a frequency notched band ranging from 4.75 to 5.85 GHz has been achieved, and good radiation performance over the entire frequency range has also been achieved.     

Band-notched ultra-wideband circular slot antenna with inverted c-shaped parasitic strip

A novel ultra-wideband (UWB) circular slot antenna with a parasitic strip for immunity at 5.2/5.8 GHz is proposed. The antenna has an indented circular stub and an inverted C-shaped parasitic strip embedded inside the circular slot. The desired band-notched UWB operation can be obtained by choosing the size of the inverted C-shaped parasitic strip. The proposed antenna has advantages of low cost, compact size and easy design. Details of the proposed design and experimental results of the constructed antennas are presented.     

Low-cost small-size tapered slot antenna for lower band UWB applications

A low-cost small-size tapered slot antenna (TSA) is investigated in view of ultra-wideband (UWB) applications. First, the bandwidth of the antenna is studied for the lower UWB band: 3.1-4.85 GHz. Secondly, the design is made as small as possible. Thirdly, the pulse distortion of a modulated Gaussian pulse in the lower UWB band, between 3.5 and 4.5 GHz, is investigated based on the measured S/sub 21/-parameter. The low distortion observed indicates that this TSA is suitable for applications in the lower UWB band.     

Design of an Ultra‐Wideband Antenna Using a Ring Resonator with a Notch Function

This paper describes an ultra‐wideband (UWB) antenna that uses a ring resonator concept. The proposed antenna can operate in the entire UWB, and the IEEE 802.11a frequency band can be rejected by inserting a notch stub into the ring resonator. The experiment results indicate that the measured impedance bandwidth of the proposed antenna is 17.5 GHz (2.5 GHz to at least 20 GHz). The proposed UWB antenna has omnidirectional radiation patterns with a gain variation of 3 dBi (1 dBi to 4 dBi).     

一种新型的具有带阻特性的超宽带微带天线

设计制作了一种新型的具有带阻特性的超宽带微带天线。天线采用50Ω共面波导馈电结构,辐射单元采用圆形金属贴片,在圆形贴片上开一个倒U形槽,实现了天线的带阻特性。测试结果表明:在频率段2.8-12.0 GHz内(除5.00-5.95 GHz外)天线驻波比小于2,且天线具有近似全向辐射的特性;而天线在频率段5.00-5.95 GHz内形成了阻带,从而有效阻隔了WLAN(5.150-5.825 GHz)频率段。该天线具有尺寸小,易于与微波电路集成等优点,可以用于超宽带系统。     

CPW-fed capacitive H-shaped narrow slot antenna

A miniature printed H-shaped narrow slot antenna fed by a coplanar waveguide (CPW) is proposed for WLAN applications in the 2.4 GHz band. The antenna with a simplified open-end tuning stub is also proposed. The prototype has been designed and fabricated and found to have a bandwidth of 13.5%, and the radiation pattern measured at resonance is very close to omnidirectional in the H-plane. The characteristics of the proposed antenna has been investigated using simulation software HFSS and experimental results. The measured and simulated results show excellent agreement.     

一种共面波导馈电的缝隙型超宽带天线

针对超宽带通信系统,提出一种小型超宽带天线,可以应用于终端设备。天线类型为共面波导馈电的缝隙型,缝隙结构为一矩形与一圆形组合而成,馈电结构与缝隙结构相似。天线的面积为22 mm×27 mm,印刷在厚度为0. 5 mm的FR4衬底上. 通过软件仿真分析了天线的工作原理以及尺寸对带宽的影响,仿真结果显示天线的带宽在不同的衬底厚度下均能覆盖UWB频段。天线的测试带宽为2.4 GHz~14.4 GHz,在超宽带的工作频段内测试效率超过76% ,测试增益大于2.1 dBi。     

一种双阻带椭圆单极子UWB天线的设计

通过仿真与实际测试结合的方法,研究并设计了一种用于UWB通信的、具有双阻带特性的紧凑椭圆单极子天线。双阻带特性是通过在辐射单元上插入一个缝隙和在馈线上引入一共面波导谐振单元实现的。测试结果表明此天线在3.45~3.75 GHz(覆盖了WIMAX频段)和5~6 GHz(覆盖了5.15~5.85 GHz的WLAN频段)分别有两个阻带,此外,驻波系数在3.1~10.6 GHz UWB的范围内小于2。天线的辐射特性也近似于全向。天线的增益和传输函数也证实了天线能达到双阻带特性。     

Ultra-Wideband and Uni-Directional Radiation Slot Antenna for Multi-Band Wireless Communication Applications

In this paper, a ultra-wideband slot antenna is proposed and developed for multi-band wireless communication applications. The radiating slot is fed by a microstrip line with a microstrip fork shaped tuning stub and backed by a finite metallic reflector. The frequency characteristic and radiation performance of the proposed antenna are successfully optimized and the related prototypes are fabricated and tested. The measured results show that the impedance bandwidth can cover the band from 1.85 to 6.1 GHz with return loss of better than 10 dB. The obtained patterns display a high gain and uni-directional radiation patterns within interested bands. With these features, the proposed structure is suitable for application in wireless communication systems, where a single antenna is needed to operate at multi-bands simultaneously, such as PCS (1.85–1.99 GHz), UMTS (1.92–2.17 GHz) and all WLAN bands (2.4–2.48 GHz, and IEEE802.11a WLAN applications: 5.15–5.35 and 5.725–5.825 GHz).     

多用途陷波小型超宽带天线

提出了一种具有陷波特性的多用途小型超宽带微带天线。该天线类似一般的宽缝隙微带天线,但在矩形调谐支节内嵌入T形支节获得了陷波特性。通过数值仿真和实验测量,对天线的阻抗特性、方向图和增益进行了研究。结果显示该天线在2.39～12GHz的频段内驻波比小于2,其中的5.15～5.95GHz的范围内具有陷波特性。同时该天线还可覆盖2.4GHz无线局域网(WLAN)频段,在整个工作频段内有良好的辐射方向特性。     

Linearly polarised radial stub fed high performance wideband slotantenna

A wideband printed slot antenna fed by a radial stub operating over the mobile communication bands PCN (1.716-1.880 GHz) and UMTS (1.9-2.0 GHz and 2.1-2.2 GHz) is presented. The impedance bandwidth of the antenna achieved for a VSMR⩽2 is 34% and the radiation patterns remain stable over the entire frequency band of operation (1.7-2.4 GHz) with cross-polarisation levels of less than -20 dB. Simulated and measured radiation pattern and return loss results are presented     

一种双陷波超宽带天线设计与研究

为了避免如WiMax和WLAN等窄带通信系统对超宽带通信系统的影响,该文提出一种具有双陷波特性的超宽带天线。该天线采用圆形贴片作为辐射单元,通过在贴片和接地板上分别开圆弧状的H形槽和L形槽来实现双陷波特性。天线在3.1~10.6 GHz的超宽带频段内能够有效地工作并抑制两种不同的窄带通信系统的干扰。同时圆弧状H形槽的参数研究表明,这种开槽结构能够以槽参数组合的形式更有效地控制陷波中心频率。实测和仿真结果吻合,该天线实现了良好的陷波功能,在工作频段内有良好的辐射方向特性。     

具有三阻带特性的新型平面超宽带天线研究

设计了一款具有三阻带特性的紧凑型超宽带天线。该天线采用共面波导结构进行馈电且能覆盖3.05~11.05 GHz的频率范围。通过在地表面加载两个对称的L形槽可以滤除WiMAX和卫星通信系统对超宽带系统的干扰,同时5.15~5.25 GHz和5.725~5.825 GHz的WLAN系统对超宽带系统的干扰分别被加载在辐射贴片上的倒C形和馈线上的倒U形槽滤除。天线经过设计,优化和制作,并对其进行了测试。测试结果表明,该天线尺寸为23mm×30 mm,其在3.05~11.05 GHz内VSWR小于2,并在3.30~4.16,5.0~5.4和5.6~6.0 GHz处形成了三个阻带。