规整填料和散堆填料传质性能比较

通过对苯 -甲苯精馏传质系数的计算 ,比较了规整填料 ( 2 5 0 Y)和散堆填料 ( 5 0 #鲍尔环 )的传质性能。结果表明 ,规整填料的传质性能优于散堆填料。这一优势主要得益于前者的比表面积远大于后者。若以传质系数 k L、k G来比较 ,新型散堆填料要强于规整填料。如何提高规整填料单位面积的传质强度是新型规整填料发展的重要方向     

规整填料内置隔板边长对压降及传质的影响

传质发生在规整填料表面,通道内气体间相互碰撞形成的涡流在一定程度上强化传质,但消耗大量能量,压降升高。为减小压降,在每个传质单元中非波谷区加入隔板得到新型规整填料Mon-JKB-250Y。CFD（Computational Fluid Dynamics计算机流体力学）模拟发现,增大隔板边长,压降减小、气相总传质效率增大、单位压降下的传质系数先增大后减小,存在一个最适宜隔板边长。在F=1.2~2.7 m·s^-1·（kg·m^-3）^0.5范围内,隔板边长为14.7~16.8 mm时,单位压降下的传质系数达到最大。运用显色化学反应可视化技术验证CFD模拟结果,平均相对误差小于10%,CFD模拟结果可靠。     

规整填料传质性能计算的研究进展

综述了规整填料传质性能的计算方法和模型,并对这些模型的理论基础和适用条件进行了分析和比较。归纳了近年来对于传统规整填料传质模型的修正和扩展,并对影响传质性能的有效比表面积的经验关联式进行了讨论,指出了规整填料传质性能研究方面进一步的探索方向和应改进的若干问题。     

规整填料在加压精馏中的传质性能

高压精馏是现代过程工业中十分重要的分离过程 ,例如炼油工业中轻烃的分离 ,石油化工中乙烯、丙烯等低碳烃类的分离 ,都是经过高压精馏完成的 .高压精馏效率一般较在常压下有所降低 ,其中填料塔较板式塔下降更明显 ,故通常认为采用板式塔比较好 .但规整填料由于其大通量、低压降等优点 ,已经开始涉及高压领域 ,因此对规整填料在高压下的性能需进行测定和研究 .目前 ,对规整填料在高压下传质性能的研究 ,国外ＦＲＩ[1] 近年已开始进行 ,但其实验数据较少 ,在国内目前还属空白 .本文在国家重点精馏分离实验室高压热模精馏实验塔上进行了一系列…     

用可视化方法实验研究规整填料的局部传质(英文)

A chromochemical reactive mass transfer technique has been employed to study local mass transfer characteristics of structured packing. This technology adopted by experiment is an Ammonia Adsorption Method (AAM) that yields the surface distribution of transferred mass by analyzing the color distribution on a filter paper with the results of the color chemical reaction. A digital image processing technology is applied for data visualiza-tion. The three-dimensional plot of the local mass transfer coefficients shows that there exist three peak values on different positions of a unit cell of structured packing. In order to improve mass transfer efficiency of the structured packing, one piece of baffle is added between packing sheets. As a result, the average mass transfer coefficient in-creases by (10-20)% and the pressure drop decreases by (15-55)%.     

规整填料在高压精馏条件下的传质性能

Performance of Mellapak 250Y and 350Y corrugated structured packing in distillation applications at pressures ranging from 0.3 to 2.0MPa is analysed by using HTU-NTU method.These data are obtained in distillation column with 0.15m diameter operated with n-butane/n-pentane system at total reflux.In considering the axial backmixing effects.the height of an overall gas phase transfer unit,HTUOG,is divided into two parts.One part represents the height of an overall gas phase transfer unit,without backmixing, designated as HUTOG,and the other part,designated as the height of a backmixing unit(HBUO),accounts for the backmixing effects.The HTUOG is evaluated from the measured concentration profile of n-butane in liquid phase.The HBUO obtained experimentally is correlated in terms of the properties of the materials being separated and the equivalent diameter of the structured packing.Our result shows that HBUO varies from 0.12 to 0.34m as pressure increases from 1.0 to 1.9MPa.It indicates that the overall efficiency of the structured packing decreas gradually at high pressure,as a result of the vapor backmixing.     

改性塑料规整填料的流体力学和传质性能研究

主要研究了不同比表面积和开孔率塑料规整填料表面处理前后的流体力学和传质性能。结果表明：经过表面改性后,传质性能可提高约20%～35%,开孔填料经表面改性后阻力不会增加,并且在低喷淋密度时传质效率提高显著。     

规整填料塔精馏的Marangoni效应

选用 6种代表性物系对陶瓷板波纹和不锈钢丝网规整填料进行全回流精馏实验 ,考察Marangoni效应对规整填料液体流动分布及传质的影响 .结果表明 :对纯有机体系 ,Marangoni效应影响较小 ;而对有机物的水溶液 ,Marangoni效应严重影响着填料的润湿和传质效率     

利用CFD及结点网络相结合的方法研究规整填料传质效率

气液两相不均匀流动是造成填料塔传质效率下降的主要原因之一.采用计算流体力学方法,定量分析规整填料内气液两相流动对传质效率影响的研究尚未见文献报道.从Navier-Stokes方程出发,首先建立了考虑气液之间相互作用的CFD计算模型,定量描述了填料片内的气相流场分布.在此基础上,结合文献中提出的液相结点分布模型及一些经典的传质理论,初步提出了适用于定量计算金属板波纹填料传质效率的耦合型算法,并对规整填料内的传质效率进行了计算,模型结果与实验值吻合较好.为规整填料传质效率的定量研究提供了新的方法和思路.     

新型板网填料传质性能的研究

在５００ｍ ｍ 冷模实验塔内对２５０ Ｙ 型填料进行氧解吸试验,结果表明三层板网复合填料的分离效率明显高于单层板网填料,尤其在液气比低的工况下,效率可以倍增,和广泛应用的金属 Ｍｅｌｌａｐａｃ填料相比,板网复合填料的分离效率能高３０％ 左右。     

规整填料内气液两相流动与传质的计算传质学模型

Detailed investigation of flow behavior in structured packing distillation columns is of great importance in accurate prediction of process efficiency and development of more efficient and optimal equipment internals. In this study, a three-dimensional two-phase flow model based on VOF method for simulating the hydrodynamics and mass-transfer behavior in a typical representative unit of the structured packing is developed. In the proposed model, the model is used for the closure of turbulent mass transfer equation. By solving the proposed model, the velocity distribution, phase fraction profile and concentration field are obtained. Using these data, the total liquid holdup, the wetted area and the separation efficiency [height equivalent to a theoretical plate (HETP)] are estimated. For testing the model validation, the simulated HETPs are compared with our previous experimental data obtained in a 150 mm-diameter column containing Mellapak 350Y operating at the pressures of 0.6-1.8 MPa. The compari-son shows that they are in satisfactory agreement, with an average absolute deviation (AAD) of 25.4%.     

规整填料塔的壁流量计算

推导了板波纹填料塔的壁流量计算方法 ,并探讨填料层分段高度的选择。     

金属孔板波纹填料的传质计算

针对目前在推广应用规整填料Ｍｅｌａｐａｋ时很少进行传质计算的缺陷,根据文献报道,对其传质计算进行综述,并给出计算示例,这对合理应用规整填料具有积极的作用。     

CFD Study on the Local Mass Transfer Efficiency in the Gas Phase of Structured Packing

Visualization of local mass transfer coefficients over the dry surface of corrugated‐sheet structured packing is essential for optimizing the existing geometry of structured packing and for improving mass transfer efficiency to develop new structured packing. The local flow patterns between packing sheets and the gas‐phase mass transfer coefficient at each point over the surface are illustrated by employing a wall‐surface reaction model. Different turbulence models are utilized, i.e., a standard κ‐? model and three different low‐Re‐κ‐? models. The numerical calculation results with the Lam‐Bremhorst low‐Re‐κ‐? turbulence model is found to agree well with experimental data. There are three similar regions with enhanced mass transfer efficiency in each mass transfer unit cell of structured packing.     

规整填料塔内流体流动研究进展及展望

阐述了规整填料塔内流体流动研究的进展 ,在理论研究方面 ,用五种模型对国内外学者的研究进行了分类和细致地描述 ,并对各模型进行了评述 ;在实验研究方面 ,对各种实验方案进行了归纳总结 ,论述了各自的优缺点。对该领域的研究进行了展望 ,认为用计算流体力学模型来描述规整填料塔内流体的流动将是今后的发展方向。     

Three-dimensional Computational Fluid Dynamics Modeling of Two-phase Flow in a Structured Packing Column

Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power-ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model...     

规整填料塔内两相流动的三维计算流体力学建模(英文)

Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed two-phase flow inside the columns. The present paper presents a three-dimensional computational fluid dy- namics （CFD） model to simulate the two-phase flow in a representative unit of the column. The unit consists of an CFD calculations on column packed with Flexipak 1Y were implemented within the volume of fluid （VOF） mathe- matical framework. The CFD model was validated by comparing the calculated thickness of liquid film with the available experimental data. Special attention was given to quantitative analysis of the effects of gravity on the hy- drodynamics. Fluctuations in the liquid mass flow rate and the calculated pressure drop loss were found to be quali- tatively in agreement with the experimental observations.