Magnesiothermic Reduction of Mg<Subscript>4</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> in the Combustion Regime

We have studied the magnesium reduction of the Mg₄Ta₂O₉ tantalate in the combustion regime and assessed the influence of starting mixture parameters on the combustion speed and temperature, the degree of reduction, and characteristics of the resultant tantalum powders. The use of Mg₄Ta₂O₉ as a precursor for the reduction process has made it possible to increase the degree of reduction and the specific surface area of tantalum powders. We have obtained powders with a specific surface area of up to 21 m²/g, which is a factor of 4–5 larger than in the case of the reduction of Ta₂O₅ under the same conditions.     

Effect of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> additions on the power loss of NiZn ferrites

Nickel–zinc ferrite system, Ni_0.65Zn_0.35Fe₂O₄ + x Nb₂O₅ where x varies from 0.0 wt% to 1.5 wt% in steps of 0.3 wt%, has been prepared by conventional ceramic technique. The samples were sintered at 1250 °C for 4 h in air atmosphere followed by natural cooling. The power loss and microstructures of these materials are examined. Microstructures reveal that niobium oxide additions promoted grain growth with an increase in grain size from 4 μm to 13.2 μm with the increase in niobium concentration. The measured power loss at frequencies from 100 kHz to 10 MHz under different exciting flux densities from 5 mT to 30 mT was found to be low up to 3 MHz, thus making the materials suitable for power applications up to this frequency. In the total power loss, hysteresis loss is predominant below 500 kHz and eddy current loss component is much higher at higher frequencies.     

Electrical properties of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaO-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses exhibiting majority charge carrier reversal

The thermoelectric power and d.c electrical conductivity of x V₂O₅⋅40CaO⋅(60−x)P₂O₅ (10 ≤ x ≤ 30) glasses were measured. The Seebeck coefficient (Q) varied from +88 μ V K⁻¹ to −93 μV K⁻¹ as a function of V₂O₅ mol%. Glasses with 10 and 15 mol% V₂O₅ exhibited p-type conduction and glasses with 25 and 30 mol% V₂O₅ exhibited n-type conduction. The majority charge carrier reversal occurred at x = 20 mol% V₂O₅. The variation of Q was interpreted in terms of the variation in vanadium ion ratio (V^{5 +}/V^{4 +}). d.c electrical conduction in x V₂O₅⋅40CaO⋅(60−x)P₂O₅ (10 ≤ x ≤ 30) glasses was studied in the temperature range of 150 to 480 K. All the glass compositions exhibited a cross over from small polaron hopping (SPH) to variable range hopping (VRH) conduction mechanism. Mott parameter analysis of the low temperature data gave values for the density of states at Fermi level N (E_F) between 1.7 × 10²⁶ and 3.9 × 10²⁶ m⁻³ eV⁻¹ at 230 K and hopping distance for VRH (R_VRH) between 3.8 × 10⁻⁹m to 3.4 × 10⁻⁹ m. The disorder energy was found to vary between 0.02 and 0.03 eV. N (E_F) and R_VRH exhibit an interesting composition dependence.     

Synthesis of anisometric KSr<Subscript>2</Subscript>Nb<Subscript>5</Subscript>O<Subscript>15</Subscript> particles in the SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–KCl system

Anisometric and agglomerate-free template particles are important for fabrication of grain-oriented ceramics. In the present work, preparation of acicular KSr₂Nb₅O₁₅ (KSN) particles was firstly explored in the SrNb₂O₆–Nb₂O₅–KCl system by molten salt synthesis (MSS) method. It was found that the molar ratio of SrNb₂O₆ to Nb₂O₅, the amount of KCl salt and synthesis time could significantly affect the phase structure and morphology of KSN particles. When calcined at 1,150 °C for 6 h with the molar ratio of SrNb₂O₆ to Nb₂O₅ was 1 and the weight ratio of salt to oxide source was 1.50, pure KSN particles with well-developed acicular morphology were successfully obtained in this system. They were agglomerate-free and with proper scale in the size range of 5–30 μm, which made them the ideal templates for fabricating textured ceramics. In addition, some new reaction and growth mechanisms were proposed in this work.     

Study of structure and properties of ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Glasses of the ternary system ZnO–Bi₂O₃–P₂O₅ were prepared and studied in two compositional series 50ZnO–xBi₂O₃–(50 − x)P₂O₅ and (50 − y)ZnO–yBi₂O₃–50P₂O₅. Two distinct glass-forming regions were found in the 50ZnO–xBi₂O₃–(50 − x)P₂O₅ glass series with x = 0–10 and 20–35 mol.% Bi₂O₃. All prepared Bi₂O₃-containing glasses reveal a high chemical durability. Small additions of Bi₂O₃ (∼5 mol.%) improve thermal stability of glasses. All glasses crystallize on heating within the temperature range of 505–583 °C. Structural studies by Raman and ³¹P MAS NMR spectroscopies showed the rapid depolymerisation of phosphate chains within the first region with x = 0–15 and the presence of isolated Q⁰ phosphate units within the second region with x = 20–35. Raman studies showed that bismuth is incorporated in the glass structure in BiO₆ units and their vibrational bands were observed within the spectral region of 350–700 cm⁻¹. The evolution of properties and the spectroscopic data are both in accordance with a network former effect of Bi₂O₃.     

Effect of secondary heat treatment on the spectroscopic properties of Na<Subscript>2</Subscript>O-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

We have studied the optical absorption and luminescence spectra of 45Na₂O · xNb₂O₅ · (55 − x)P₂O₅ glasses containing 5, 10, 20, 25, 30, and 35 mol % Nb₂O₅. The results indicate that the absorption band around 26000 cm⁻¹, responsible for the yellow color of the glasses, is due to the [Nb^(5+)--O⁻] center and disappears upon secondary heat treatment. Heat treatment of europium-doped glasses increases the concentration of Eu³⁺ centers in an asymmetric environment, which is accompanied by an increase in luminescence efficiency. The reason for this is that the Eu³⁺ ions are located outside the niobate subsystem of the glass matrix. The europium in the glasses studied acts as a protector ion.     

Effect of ultrarapid quenching on the structure and mechanical properties of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> and Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>

We have studied the detailed structure and mechanical properties of the Nb₂O₅ and Ta₂O₅ pentoxides after ultrarapid quenching in comparison with the properties of Nb₂O₅ and Ta₂O₅ ceramics prepared by a conventional ceramic processing technique and using high-intensity light (HIL) in an optical furnace. The results demonstrate that high-energy processing (HIL and ultrarapid quenching) improves the hardness and strength of Nb₂O₅ and Ta₂O₅. At the same time, HIL processing and quenching lead to structural disordering of the Nb₂O₅ and Ta₂O₅ pentoxides.     

Electrical conductivity of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Tm<Subscript>2</Subscript>O<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions

New solid solutions, Bi_2?x?y Tm _x Nb _y O_3+δ, with tetragonal and cubic structures have been synthesized in the Bi₂O₃-Tm₂O₃-Nb₂O₅ system, and their electrical conductivity has been measured at temperatures from 670 to 1020 K. The 1020-K conductivity of the tetragonal solid solution Bi_1.8Tm_0.15Nb_0.05O_3+δ is comparable to that of Bi_1.75Tm_0.25O₃, the best conductor in the Bi₂O₃-Tm₂O₃ system.     

Enhancement in electrical conductivity of Li<Subscript>2</Subscript>O: B<Subscript>2</Subscript>O<Subscript>3</Subscript>: V<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

The study of electrical conductivity of 30Li₂O: (70 − x) B₂O₃: xV₂O₅ glass samples has been carried out. The results have been explained by dividing the temperature range into two regions. In region I, conductivity shows Arrhenius behaviour for all the samples. The conductivity increases with addition of V₂O₅. The results have been explained in the light of Anderson and Stuart Model. In region II, an anomalous enhancement in the conductivity is observed for all the samples up to certain temperature beyond which the conductivity decreases. The enhancement in the conductivity in the annealed glass sample has been attributed to nanocrystallization.     

Low-firing Li<Subscript>2</Subscript>ZnTi<Subscript>3</Subscript>O<Subscript>8</Subscript> microwave dielectric ceramics with BaCu(B<Subscript>2</Subscript>O<Subscript>5</Subscript>) additive

Phase purity, microstructure, sinterability and microwave dielectric properties of BaCu(B₂O₅)-added Li₂ZnTi₃O₈ ceramics and their cofireability with Ag electrode were investigated. A small amount of BaCu (B₂O₅) can effectively reduce the sintering temperature from 1075°C to 925°C, and it does not induce much degradation of the microwave dielectric properties. Microwave dielectric properties of ε _r = 23·1, Q × f = 22,732 GHz and τ _f = − 17·6 ppm/°C were obtained for Li₂ZnTi₃O₈ ceramic with 1·5 wt% BaCu(B₂O₅) sintered at 925°C for 4 h. The Li₂ZnTi₃O₈ +BCB ceramics can be compatible with Ag electrode, which makes it a promising microwave dielectric material for low-temperature co-fired ceramic technology application.     

Temperature-stable and low loss Fe-containing dielectrics in BaO-Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Polycrystalline samples of Ba₄Ln₂Fe₂Ta₈O₃₀ (Ln = La and Nd) were prepared by a high temperature solid-state reaction technique. The formation, structure, dielectric and ferroelectric properties of the compounds were studied. Both compounds are found to be paraelectrics with filled tetragonal tungsten bronze (TB) structure at room temperature. Dielectric measurements revealed that the present ceramics have exceptional temperature stability, a relatively small temperature coefficient of dielectric constant (τ _ε ) of −25 and −58 ppm/°C, with a high dielectric constant of 118 and 96 together with a low dielectric loss of 1.2 × 10⁻³ and 2.8 × 10⁻³ (at 1 MHz) for Ba₄La₂Fe₂Ta₈O₃₀ and Ba₄Nd₂Fe₂Ta₈O₃₀, respectively. The measured dielectric properties indicate that both materials are possible candidates for the fabrication of discrete multilayer capacitors in microelectronic technology.     

Thermal dissociation and hydrogen reduction of DyMn<Subscript>2</Subscript>O<Subscript>5</Subscript>

The dissociation and hydrogen reduction of DyMn₂O₅ have been studied in the temperature range 973–1173 K. The results were used to construct partial p-T-x phase diagrams of the Dy-Mn-O system. Our experimental data demonstrate that the thermal dissociation of DyMn₂O₅ is a three-step process, accompanied by the formation of distinct compounds in the following sequence: DyMn₂O₅ → DyMnO₃ + Mn₃O₄ + O₂ → DyMnO₃ + MnO + O₂ → Dy₂O₃ + MnO + O₂. For both DyMn₂O₅ and DyMnO₃, we have evaluated the standard enthalpy and entropy of formation from elements.     

Luminescence of europium-doped BaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

We have prepared europium-doped BaO-Bi2O₃-B2O₃ glasses and investigated the doping effect on the main physicochemical properties and local structure of the glasses. Using Judd-Ofelt analysis, we calculated intensity parameters (Ω₂, Ω₄, and Ω₆), spontaneous emission probabilities, the radiative lifetime, luminescence branching factors, the quantum yield of luminescence, and the stimulated emission cross sections for ⁵ D ₀ → ⁷ F _J transitions.     

Polycrystalline materials in MoO<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript>–V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Melt quenching technique was applied to study tendency for phase formation and amorphization in the MoO₃–ZrO₂–V₂O₅ system. By X-ray diffraction were detected the main crystalline phases separated during the quenching: Zr(MoO₄)₂, V₂MoO₈, (Mo_0.3V_0.7)₂O₅, V_0.95Mo_0.97O₅ but in a wide concentration range the dominant crystalline phase was monoclinic ZrO₂. The average particle sizes of the obtained crystal phases were in the range 30–50 nm. A narrow glass formation area was situated, near MoO₃–V₂O₅ side. The glass-crystalline samples were obtained in the MoO₃- and V₂O₅-rich compositions. The phase formation was proven by IR analysis also. IR data showed that the main structural units built up the glass network are corner shared VO₅ and MoO₆ groups while in the corresponding crystal V₂MoO₈ phase MeO₆ (Me = V, Mo) octahedra are corner and edge shared (band at 580 cm⁻¹).     

Phase equilibria in the La<Subscript>2</Subscript>O<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-Nb system and thermal stability of LaNb<Subscript>7</Subscript>O<Subscript>12</Subscript>

The phase equilibria in the ternary system La₂O₃-Nb₂O₅-Nb have been studied at subsolidus temperatures in vacuum (6.65 × 10^?3 Pa), and the temperature stability limits of LaNb₇O₁₂ have been determined in vacuum and during heating in air.     

Crystallization from high-temperature solutions in the K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

We have studied general trends of crystallization from high-temperature solutions in the K₂O-P₂O₅-V₂O₅-Bi₂O₃ system at P/V = 0.5?2.0, K/(P + V) = 0.7?1.4, and Bi₂O₃ contents from 25 to 50 wt % and identified the stability regions of BiPO₄, K₃Bi₅(PO₄)₆, K₂Bi₃O(PO₄)₃, and K₃Bi₂(PO₄)_{3 ? x} (VO₄) _x (x = 0?3) solid solutions. The synthesized compounds have been characterized by X-ray powder diffraction and IR spectroscopy, and the structure of two solid solutions has been determined by single-crystal X-ray diffraction (sp. gr. C ₂/c): K₃Bi₂(PO₄)₂(VO₄), a = 13.8857(8), b = 13.5432(5), c = 6.8679(4) Å, β = 114.031(7)°; K₃Bi₂(PO₄)_1.25(VO₄)_1.75, a = 13.907(4), b = 13.615(2), c = 6.956(2) Å, β = 113.52(4)°.     

Investigation on the stability of Li<Subscript>5</Subscript>La<Subscript>3</Subscript>Ta<Subscript>2</Subscript>O<Subscript>12</Subscript> lithium ionic conductors in humid environment

In this paper, the stability in humid air of Li₅La₃Ta₂O₁₂ lithium ionic conductors synthesized by conventional solid-state reaction was investigated by internal friction, conductivity, weight variation, X-ray diffraction, and thermogravimetric analysis methods. It was found that when the Li₅La₃Ta₂O₁₂ samples were aged in open air at room temperature, the internal friction peaks associated with the short-distance diffusion of lithium vacancies gradually shift toward higher temperature and increase in height, while the weight of the sample increases and impurity phases of LiOH·H₂O appear. These results reveal that the Li₅La₃Ta₂O₁₂ compounds are unstable against moisture in open air at room temperature. It was suggested that the protons from the moisture substitute the lithium ions in Li₅La₃Ta₂O₁₂ samples to form Li₂O and new protonic derivatives, Li_5?x La₃Ta₂O_12?x (OH) _x (0<x<2.15), and the resultant Li₂O may react further with water to form LiOH·H₂O.     

Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and Nd<Subscript>2</Subscript>O<Subscript>3</Subscript> co-stabilized ZrO<Subscript>2</Subscript>-WC composites

Y₂O₃ + Nd₂O₃ co-stabilized ZrO₂-based composites with 40 vol% WC were fully densified by pulsed electric current sintering (PECS) at 1350 °C and 1450 °C. The influence of the PECS temperature and Nd₂O₃ co-stabilizer content on the densification, hardness, fracture toughness and bending strength of the composites was investigated. The best combination of properties was obtained for a 1 mol% Y₂O₃ and 0.75 mol% Nd₂O₃ co-stabilized composite densified for 2 min at 1450 °C under a pressure of 62 MPa, resulting in a hardness of 15.5 ± 0.2 GPa, an excellent toughness of 9.6 ± 0.4 MPa.m^0.5 and an impressive 3-point bending strength of 2.04 ± 0.08 GPa. The hydrothermal stability of the 1 mol% Y₂O₃ + 1 mol% Nd₂O₃ co-stabilized ZrO₂-WC (60/40) composites was compared with that of the equivalent 2 mol% Y₂O₃ stabilized ceramic. The double stabilized composite did not degrade in 1.5 MPa steam at 200 °C after 4000 min, whereas the yttria stabilized composite degraded after less than 2000 min. Moreover, the (1Y,1Nd) ZrO₂-WC composites have a substantially higher toughness (~9 MPa.m^0.5) than their 2Y stabilized equivalents (~7 MPa.m^0.5).     

Microstructure and high-temperature strength of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Er<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>/ZrO<Subscript>2</Subscript> ternary melt growth composite

A new Al₂O₃/Er₃Al₅O₁₂(EAG)/ZrO₂ ternary MGC (Melt Growth Composite) with a novel microstructure has been fabricated by unidirectional solidification. This ternary MGC has a microstructure consisting of continuous networks of single-crystal Al₂O₃, single-crystal EAG and fine cubic-ZrO₂ phases without grain boundaries. The ternary MGC has also characteristic dimensions of the microstructure of around 2–4 m for EAG phases, around 2–4 m for Al₂O₃ phases reinforced with around 0.4–0.8 m cubic-ZrO₂ phases. No amorphous phases are formed at interfaces between phases in the ternary MGC. The ternary MGCs flexural strength at 1873 K is approximately 700 MPa, more than twice the 330 MPa of the Al₂O₃/EAG binary MGC. The fracture manner of the Al₂O₃/EAG/ZrO₂ ternary MGC at 1873 K shows the same intergranular fracture as the Al₂O₃/EAG binary MGC, but is significantly different from the transgranular fracture of the sintered ceramic.     

Preparation and Physical Properties of Ag<Subscript>5</Subscript>Pb<Subscript>2</Subscript>O<Subscript>6</Subscript>-Ag Ceramics

A new process for Ag₅Pb₂O₆ synthesis is described. Ag₅Pb₂O₆-Ag ceramics are prepared and characterized using x-ray diffraction, thermal analysis, and scanning electron microscopy. The room-temperature resistivity of Ag₅Pb₂O₆ ceramics is 0.35–0.37 m cm, and that of Ag₅Pb₂O₆-Ag ceramics is 0.03–0.04 µ cm.__________Translated from Neorganicheskie Materialy, Vol. 41, No. 5, 2005, pp. 628–634.Original Russian Text Copyright © 2005 by Akimov, Savchuk.