基于模型完全动态延时逆的内模控制方法

针对常规内模控制中存在的缺点,提出了一种基于模型完全动态延时逆的内模控制方法,采用神经网络自适应滤波器对内部模型和完全动态延时逆进行在线学习和控制,取消低通滤波器的设计,以逆的延时时间的调整来提高系统的鲁棒稳定性,并把内模控制器的动态响应和扰动消除控制分开进行。理论分析和仿真实验表明,此方法对系统输入信号的跟踪响应具有很高的稳态精度和动态控制品质,对对象的扰动消除具有很好的效果,是一种新型、具有鲁棒稳定性的内模控制方法。     

An approximate internal model-based neural control for unknown nonlinear discrete processes

An approximate internal model-based neural control (AIMNC) strategy is proposed for unknown nonaffine nonlinear discrete processes under disturbed environment. The proposed control strategy has some clear advantages in respect to existing neural internal model control methods. It can be used for open-loop unstable nonlinear processes or a class of systems with unstable zero dynamics. Based on a novel input-output approximation, the proposed neural control law can be derived directly and implemented straightforward for an unknown process. Only one neural network needs to be trained and control algorithm can be directly obtained from model identification without further training. The stability and robustness of a closed-loop system can be derived analytically. Extensive simulations demonstrate the superior performance of the proposed AIMNC strategy.     

A novel neural approximate inverse control for unknown nonlinear discrete dynamical systems.

A novel neural approximate inverse control is proposed for general unknown single-input-single-output (SISO) and multi-input-multi-output (MIMO) nonlinear discrete dynamical systems. Based on an innovative input/output (I/O) approximation of neural network nonlinear models, the neural inverse control law can be derived directly and its implementation for an unknown process is straightforward. Only a general identification technique is involved in both model development and control design without extra training (online or offline) for the neural nonlinear inverse controller. With less approximation made on controller development, the control will be more robust to large variations in the operating region. The robustness of the stability and the performance of a closed-loop system can be rigorously established even if the nonlinear plant is of not well defined relative degree. Extensive simulations demonstrate the performance of the proposed neural inverse control.     

基于PID神经元网络和内模控制的拥塞控制算法*

针对网络系统的大时滞和非线性特性,设计了一种新的拥塞控制算法,将PID神经元网络与内模控制相结合应用于主动队列管理中,并使用Lyapunov理论证明了此算法的稳定性。NS仿真结果表明,这种算法的稳态和瞬态性能都优于PID算法,并且在参数变化和负载扰动时具有很强的鲁棒性。     

Nonlinear one-step-ahead control using neural networks: Control strategy and stability design

A nonlinear one-step-ahead control strategy based on a neural network model is proposed for nonlinear SISO processes. The neural network used for controller design is a feedforward network with external recurrent terms. The training of the neural network model is implemented by using a recursive least-squares (RLS)-based algorithm. Considering the case of the nonlinear processes with time delay, the extension of the mentioned neural control scheme to d-step-ahead predictive neural control is proposed to compensate the influence of the time-delay. Then the stability analysis of the neural-network-based one-step-ahead control system is presented based on Lyapunov theory. From the stability investigation, the stability condition for the neural control system is obtained. The method is illustrated with some simulated examples, including the control of a continuous stirred tank reactor (CSTR).     

多变量模糊神经网络控制器的研究

提出一种MIMO系统的模糊神经网络控制器结构,阐述了基本设计思想和具体算法过程。应用实例仿真结果表明,它可用于控制强耦合带时延多变量系统,并使系统具有良好的动态和静态性能。     

热工过程时滞对象的神经网络内模控制

针对火电厂热工过程的时滞对象，提出采用基于神经网络的内模控制方法，即用神经网络对复杂系统的辨识能力来实现内模控制中被控对象的正模型及内模控制器。仿真研究表明，文中所采用的控制方案比常规PID控制表现出更好的控制品质，在实际应用中具有一定的实用价值。     

时滞系统的神经网络辨识与控制算法

针对时滞系统、应用神经网络的非线性逼近能力,采用神经网络实现内模控制中被控对象的正模型及内模控制器,用Lyapunov稳定性定理证明神经网络控制系统的稳定性。仿真结果说明神经网络内模控制方案的优越性。     

Rapid stabilisation of multi-dimensional Schrödinger equation with the internal delay control

In this paper, we are concerned with the controller design for multi-dimensional Schrödinger equation with the internal delay control. We introduce a new approach to design the feedback control law based on the system equivalence. First, we construct a target system with the desired exponential stability. Second, we select a proper transformation and inverse transformation which guarantee the equivalence of both systems. In this procedure, we can get the expression of feedback control. Finally, exponential stability of the closed-loop system under the feedback controller is acquired through establishing equivalence relation between the closed-loop system and the target system.     

Development of a neural network based integrated control system of 120 ton/h capacity boiler

An integrated control system based on artificial neural network (ANN) is presented in this paper to control a 120 ton/h capacity boiler of the Zia Fertilizer Company Limited (ZFCL), Ashuganj, Bangladesh. The process inverse dynamic modelling technique is applied to design the proposed controller. A multilayer feed-forward neural network is trained to identify the unknown inverse dynamic model of the boiler plant by a well known learning algorithm called backpropagation. The training data were collected from the history file of ZFCL. A new software controller is then developed for integrated control system of the ZFCL boiler using the weights of the trained network. Both the training mode and running mode of the developed controller are presented in this paper. The controller output is also converted into electrical signal using pulse width control technique. The generated signal is used for on-line regulation of the control valve through the parallel port of the computer. The developed controller is tested by using the boiler input–output data that are not used during the training. The output response and performance of the developed controller is compared with those of the existing PID controller of the plant.     

Nonlinear system compound inverse control method

A compound neural network is utilized to identify the dynamic nonlinear system. This network is composed of two parts： one is a linear neural network, and the other is a recurrent neural network. Based on the inverse theory a compound inverse control method is proposed. The controller has also two parts： a linear controller and a nonlinear neural network controller. The stability condition of the closed-loop neural network-based compound inverse control system is demonstrated .based on the Lyapunov theory. Simulation studies have shown that this scheme is simple and has good control accuracy and robustness.     

Nonlinear system compound inverse control method

A compound neural network is utilized to identify the dynamic nonlinear system.This network is composed of two parts: one is a linear neural network,and the other is a recurrent neural network.Based on the inverse theory a compound inverse control method is proposed.The controller has also two parts:a linear controller and a nonlinear neural network controller.The stability condition of the closed-loop neural network-based compound inverse control system is demonstrated based on the Lyapunov theory.Simulation studies have shown that this scheme is simple and has good control accuracy and robustness.     

发电机的非线性自适应逆推综合控制

发电机励磁和汽门系统是一个典型的多变量、非线性、强耦合、不确定复杂系统,其综合控制将会改善电力系统稳定性和动态品质,所以设计简单、有效的综合控制器既必要又困难.针对单机无穷大励磁与汽门系统,运用自适应逆推方法和系统的Lyapunov函数,获得了发电机的非线性综合控制器和参数替换律,文中给出了该控制器的具体设计步骤.由于在控制器设计中没有运用任何线性化方法,因而所得控制器充分利用了系统的非线性特性;同时考虑了发电机阻尼系数的不确定性,使得控制器对系统参数的变化具有很强的鲁棒性.数字仿真结果表明,所设计的控制器具有鲁棒性,并可有效地提高电力系统的稳定性.     

时滞过程改进型Smith预估器的整定

证明Majhi和Atherton(1999)文所提出的改进型Smith预估器等价于一改进的内模控制结构 (IMC), 并对该结构提出一种三阶段设计方法. 为获得扰动抑制和稳定鲁棒性的均衡, 采用了鲁棒控制方法来整定反馈环控制器. 针对某些典型的积分和不稳定时滞过程的设计表明所提方法能获得较好的扰动抑制和稳定鲁棒性的均衡.     

A new dead-time compensator to control stable and integrating processes with long dead-time

This paper presents a new dead-time compensator for stable and integrating processes when a reduced model of the process is considered. The output is estimated from a discrete time representation of the continuous time model and the tuning of the controllers can be made by any classical control design approach for systems without delay. The internal stability and the robust stability of the proposed scheme is proved and a deep analysis of the disturbance rejection performance is included. As a result, a tuning procedure is derived. An illustrative example shows that the robustness and performance of the proposed scheme are similar or better to those of the more recently proposed dead-time compensators for stable and integrating processes, its capability to reject ramp disturbances being also addressed. The proposed scheme has been tested in a real-time application to control the roll angle in a laboratory prototype of a quad-rotor helicopter.     

Fuzzy neural network sliding mode control for long delay time systems based on fuzzy prediction

Delay time, which may degrade the control performance, is frequently encountered in various control processes. The fuzzy neural network sliding mode controller (FNNSMC), which incorporates the fuzzy neural network (FNN) with the sliding mode controller (SMC), is developed to control the long delay system with unknown model based on fuzzy prediction algorithm in the paper. According to the characteristics of the long delay systems, we simulate the manual operating process and predict the delayed error and its derivative based on the information of the input and output variables of the process, and then feedback these prediction values to the FNN and train the FNN with the regulation function by the idea of sliding mode control until the better control results are obtained. The FNNSMC has more robustness due to the abilities of the learning and reasoning and can eliminate the drawbacks of the general SMC, namely the chattering in the control signal and the needing knowledge of the bounds of the disturbances and uncertainties. Simulation examples demonstrate the advantages of the proposed control scheme.     

Adaptive RBF neural network control of robot with actuator nonlinearities

In this paper, an adaptive neural network control scheme for robot manipulators with actuator nonlinearities is presented. The control scheme consists of an adaptive neural network controller and an actuator nonlinearities compensator. Since the actuator nonlinearities are usually included in the robot driving motor, a compensator using radial basis function (RBF) network is proposed to estimate the actuator nonlinearities and eliminate their effects. Subsequently, an adaptive neural network controller that neither requires the evaluation of inverse dynamical model nor the time-consuming training process is given. In addition, GL matrix and its product operator are introduced to help prove the stability of the closed control system. Considering the adaptive neural network controller and the RBF network compensator as the whole control scheme, the closed-loop system is proved to be uniformly ultimately bounded (UUB). The whole scheme provides a general procedure to control the robot manipulators with actuator nonlinearities. Simulation results verify the effectiveness of the designed scheme and the theoretical discussion.     

Nonlinear internal model control: application of inverse model based fuzzy control

This paper investigates the possible applications of dynamical fuzzy systems to control nonlinear plants with asymptotically stable zero dynamics using a fuzzy nonlinear internal model control strategy. The developed strategy consists in including a dynamical Takagi-Sugeno fuzzy model of the plant within the control structure. In this way, the controller design simply results in a fuzzy model inversion. In this framework, the originality of the presented work lies in the use of a dynamical fuzzy model and its inversion. In order to be able to implement the control structure, two crucial points have to be addressed in the considered fuzzy context, on the one hand the model representation and identification, on the other, the model inversion. As the fuzzy system can be viewed as a collection of elementary subsystems, its inversion is approached here in a local way, i.e., on the elementary subsystems capable to provide an inverse solution. In this case, the inversion of the global fuzzy system is thus tackled by inversion of some of its components. By doing so, exact inversion is obtained and offset-free performances are ensured. In order to guarantee a desired regulation behavior and robustness of stability of the control system, the fuzzy controller is connected in series with a robustness filter. The potential of the proposed method is demonstrated with simulation examples.     

Observer based adaptive neuro-sliding mode control for MIMO nonlinear systems

In this paper, a stable adaptive neural sliding mode controller is developed for a class of multivariable uncertain nonlinear systems. For these systems not all state variables are available for measurements. By designing a state observer, adaptive neural systems, which are used to model unknown functions, can be constructed using the state estimations. Based on Lyapunov stability theorem, the proposed adaptive neural control system can guarantee the stability of the whole closed loop system and obtain good tracking performances. Adaptive laws are proposed to adjust the free parameters of the neural models. Simulation results illustrate the design procedure and demonstrate the tracking performances of the proposed controller.     

一种时滞过程内模PID控制器鲁棒整定方法

针对典型的一阶时滞（FOPTD）、二阶时滞（SOPTD）以及一阶时滞积分（FODI）过程,提出了一种简便的内模PID控制器设计和参数整定方法。 用一阶泰勒级数逼近系统模型的时滞项,导出内模PID控制器参数表达式,且仅有一个可调参数β,该可调参数与系统的动态性能和鲁棒性直接相关。基于控制系统的鲁棒性能指标给出了控制器可调参数β进行鲁棒整定的解析表达式。仿真结果表明,该方法可使系统同时获得良好的设定值跟踪特性、扰动抑制特性和克服参数变化的鲁棒性。