The effects of CNT alignment on electrical conductivity and mechanical properties of SWNT/epoxy nanocomposites

The single-walled carbon nanotubes (SWNTs) filled nanocomposite SWNT/epoxy resin composite with good uniformity, dispersion and alignment of SWNTs and with different SWNTs concentrations was produced by solution casting technique. Subsequently, the semidried mixture was stretched repeatedly along one direction at a large draw-ratio of 50 for 100 times at ambient atmosphere manually to achieve a good alignment and to promote dispersion of SWNTs in the composite matrix. Composite showed higher electrical conductivities and mechanical properties such as the Young’s modulus and tensile strength along the stretched direction than perpendicular to it, and the electrical property of composite rise with the increase of SWNT concentration. The percolation threshold value of electrical conductivity along the stretching direction is lower than the value perpendicular to the SWNTs orientation. In addition, the anisotropic electric and mechanical properties results, SEM micrograph and the polarized Raman spectra of the SWNT/epoxy composite reveal that SWNTs were well dispersed and aligned in the composites by the repeated stretching process.     

Nanoinfiltration behavior of carbon nanotube based nanocomposites with enhanced mechanical and electrical properties

In this work,carbon nanotube (CNT) based nanocomposites with high mass fraction are proposed by in-situ bridging carbon matrix into CNT paper through optimized chemical vapor infiltration (CVI).Nanoinfiltration behavior of CNTs is basically investigated under the CVI process.The contact between each CNT can be strengthened and the conductive pathways can be established,resulting in the better mechanical and electrical properties.Compared with the pristine CNT paper,the CNT/C composite after pyrolysis process confirms a remarkable advance in tensile strength (up to 310 ± 13 MPa) and Young's modulus (up to 2.4 ± 0.1 GPa).Besides,a notable feature of electrical conductivity also shows an improvement up to 8.5 S/cm,which can be attributed to the mass fraction of CNT (41 wt％) breaking the limits of percolation thresholds and the efficient densification of this sample to establish the conductive pathways.This study has a broad application in the development of the multi-functional electrical and engineering materials.     

Effects of stretching on mechanical properties of aligned multi-walled carbon nanotube/epoxy composites

Composites based on epoxy resin and differently aligned multi-walled carbon nanotube (MWCNT) sheets have been developed using hot-melt prepreg processing. Aligned MWCNT sheets were produced from MWCNT arrays using the drawing and winding technique. Wavy MWCNTs in the sheets have limited reinforcement efficiency in the composites. Therefore, mechanical stretching of the MWCNT sheets and their prepregs was conducted for this study. Mechanical stretching of the MWCNT sheets and hot stretching of the MWCNT/epoxy prepregs markedly improved the mechanical properties of the composites. The improved mechanical properties of stretched composites derived from the increased MWCNT volume fraction and the reduced MWCNT waviness caused by stretching. With a 3% stretch ratio, the MWCNT/epoxy composites achieved their best mechanical properties in this study. Although hot stretching of the prepregs increased the tensile strength and modulus of the composites considerably, its efficiency was lower than that of stretching the MWCNT sheets.     

Effect of carbon nanotube orientation on the mechanical properties of nanocomposites

Carbon nanotubes (CNTs) have been regarded as ideal reinforcements of high-performance composites with enormous applications. In this paper, nano-structure is modeled as a linearly elastic composite medium, which consists of a homogeneous matrix having hexagonal representative volume elements (RVEs) and homogeneous cylindrical nanotubes with various inclination angles. Effects of inclined carbon nanotubes on mechanical properties are investigated for nano-composites using 3-D hexagonal representative volume element (RVE) with short and straight CNTs. The CNT is modeled as a continuum hollow cylindrical shape elastic material with different angles. The effect of the inclination of the CNT and its parameters is studied. Numerical equations are used to extract the effective material properties for the hexagonal RVE under axial as well as lateral loading conditions. The computational results indicated that elastic modulus of nano-composite is remarkably dependent on the orientation of the dispersed SWNTs. It is observed that the inclination significantly reduces the effective Young’s modulus of elasticity under an axial stretch. When compared with lateral loading case, effective reinforcement is found better in axial loading case. The effective moduli are very sensitive to the inclination and this sensitivity decreases with the increase of the waviness. In the case of short CNTs, increasing trend is observed up to a specific value of waviness index. It is also found from the simulation results that geometry of RVE does not have much significance on stiffness of nano-structures. The results obtained for straight CNTs are consistent with ERM results for hexagonal RVEs, which validate the proposed model results.     

The electrical properties of polymer nanocomposites with carbon nanotube fillers

The electrical properties of polymer nanocomposites containing a small amount of carbon nanotube (CNT) are remarkably superior to those of conventional electronic composites. Based on three-dimensional (3D) statistical percolation and 3D resistor network modeling, the electrical properties of CNT nanocomposites, at and after percolation, were successfully predicted in this work. The numerical analysis was also extended to investigate the effects of the aspect ratio, the electrical conductivity, the aggregation and the shape of CNTs on the electrical properties of the nanocomposites. A simple empirical model was also established based on present numerical simulations to predict the electrical conductivity in several electronic composites with various fillers. This investigation further highlighted the importance of theoretical and numerical analyses in the exploration of basic physical phenomena, such as percolation and conductivity in novel nanocomposites.     

Processing and electrical properties of carbon nanotube/vinyl ester nanocomposites

Vinyl ester resins are often utilized in advanced naval composite structures due to the relatively low viscosity of the resin and the capability to cure at ambient temperatures. These qualities facilitate the production of large naval composite structures using resin infusion techniques. Vinyl ester monomer was synthesized from the epoxy resin to overcome processing challenges associated with volatility of the styrene monomer in vinyl ester resin. In this research we have investigated the use of a calendering approach for dispersion of multi-walled carbon nanotubes in vinyl ester monomer, and the subsequent processing of nanotube/vinyl ester composites. The high aspect ratios of the carbon nanotubes were preserved during processing and enabled the formation of a conductive percolating network at low nanotube concentrations. An electrical percolation threshold below 0.1 wt.% carbon nanotubes in vinyl ester was observed. Formation of percolating carbon nanotube networks at low concentration holds promise for the utilization of carbon nanotubes as in situ sensors for detecting deformation and damage in advanced naval composites.     

Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites

The purpose of this study is to investigate the static and dynamic mechanical properties of polydimethylsiloxane (PDMS) and the mixture of PDMS and carbon nanotubes. The PDMS/CNT nanocomposites were stirred by an ultrasonic instrument to prevent agglomerations. The tested specimens of nanocomposites were manufactured by using the thermoforming method at 150 °C for 15 min. A micro tensile tester was adopted in this testing system with a maximum load of 500 mN and a crosshead extension of 150 mm. The static elastic modulus can be calculated by means of a tensile test and the average elastic modulus of pure PDMS is 1.65 MPa. In addition, the Nano Bionix tensile tester was also used to perform the dynamic mechanical analysis. Its dynamic frequency range is from 0.1 Hz to 2.5 KHz. The dynamic properties of PDMS/CNT nanocomposites such as storage and loss modulus can be obtained by this system. The storage modulus increased with the CNT content and also with the higher frequencies. Finally, the nanoindentation measurement system was employed to characterize the mechanical properties of PDMS and PDMS/CNTs. The measurement results of elastic modulus by a nanoindentation test have the similar trend with the results obtained by the tensile test method.     

Improving the mechanical properties of multiwalled carbon nanotube/epoxy nanocomposites using polymerization in a stirring plasma system

Uniform treatment of multiwalled carbon nanotubes by plasma treatment has been investigated using a custom-built stirring plasma system. A thin plasma polymer with high levels of amine groups has been deposited on MWCNTs using a combination of continuous wave and pulsed plasma polymerization of heptylamine in the stirring plasma system. Scanning electron microscopy showed that the plasma polymerization improved the dispersion and interfacial bonding of the MWCNTs with an epoxy resin at loadings of 0.1, 0.3 and 0.5 wt%. The flexural and thermal mechanical properties of plasma polymerized MWCNT/epoxy nanocomposites were also significantly improved while untreated MWCNT/epoxy nanocomposites showed an opposite trend. The epoxy with 0.5 wt% plasma polymerized MWCNTs had the greatest increase in flexural properties, with the flexural modulus, flexural strength and toughness increasing by about 22%, 17% and 70%, respectively.     

Isothermal crystallization behavior and mechanical properties of polylactide/carbon nanotube nanocomposites

Carbon nanotube (CNT)–reinforced polylactide (PLA) nanocomposites were prepared using a melt compounding process employing a twin-screw extruder. The isothermal crystallization kinetics of PLA/CNT nanocomposites according to Avrami’s theory were analyzed using differential scanning calorimetry in the temperature range 90–120 °C. There was a significant dependence of CNT on the crystallization behavior of the PLA matrix. The incorporation of CNT improved effectively the crystallization rate of PLA/CNT nanocomposites through heterogeneous nucleation. The nucleating effect of CNTs which increased the number of nucleation sites and decreased the average spherulite size was confirmed using polarized optical microscopy. The rheological properties of the PLA/CNT nanocomposites were also investigated. Changes in the microstructure of the PLA/CNT nanocomposites occurred by incorporating CNT. Furthermore, the tensile strength/modulus and thermal stability of PLA/CNT nanocomposites were enhanced when a very small quantity of CNT was added. This research accounts for the effect of CNTs, which significantly influenced the isothermal behavior, thermal stability, mechanical, and rheological properties of the PLA/CNT nanocomposites, providing a design guide for PLA/CNT nanocomposites in industrial fields.     

Effects of grafted chain length on mechanical and electrical properties of nanocomposites containing polylactide-grafted carbon nanotubes

We herein report the effects of interfacial reinforcement on mechanical and electrical properties of nanocomposites based on polylactide (PLA) and multi-walled carbon nanotube (MWCNT). For this purpose, a series of MWCNTs grafted with PLA chains of various lengths (MWCNT-g-PLAs) were prepared by ring-opening polymerization of l-lactide with carboxylic acid-functionalized MWCNT (MWCNT-COOH). MWCNT-g-PLAs were then mixed with commercial PLA to obtain PLA/MWCNT-g-PLA nanocomposites with 1.0 wt.% MWCNT content. It was revealed that morphological, mechanical, and electrical properties of PLA/MWCNT-g-PLA nanocomposites were strongly dependent on the PLA chain length of MWCNT-g-PLAs. FE-SEM images exhibited that the nanocomposites containing MWCNT-g-PLA with longer PLA chain length exhibited better dispersion of MWCNTs in the PLA matrix. Initial moduli and tensile strengths of PLA/MWCNT-g-PLA composites increased with the increment of chain length of PLA grafted on MWCNTs, which attributes to the improved interfacial adhesion between the grafted PLA chains of MWCNT-g-PLA and the PLA matrix. As a result, the experimental initial modulus (2775 ± 193 MPa) of the nanocomposite including MWCNT-g-PLA with PLA chains of average molecular weight of 530 g/mol was quite close to the theoretical value (2911 MPa) predicted for the nanocomposite with perfect interfacial adhesion. Unexpectedly, electrical resistivities of PLA/MWCNT-g-PLA nanocomposites were found to increase from ∼10⁴ to ∼10¹² Ω/sq with increasing the PLA chain length of MWCNT-g-PLA, which is due to the fact that the PLA chains grafted on MWCNTs prevent the formation of the electrical conduction path of MWCNTs in the PLA matrix.     

Effect of fabrication process on electrical properties of polymer/multi-wall carbon nanotube nanocomposites

Polymer/carbon nanotubes nanocomposites were fabricated by an in situ polymerization process using multi-wall carbon nanotubes (MWNT) as filler in an epoxy polymer. Effects of curing process, mixing speed, mixing time, addition of ethanol, timing of hardener addition, etc., in the fabrication process on the electrical properties of nanocomposites have been investigated. In the fabrication process, the effective formation of macroscopic conducting network in matrix is most important to enhance the electrical properties of nanocomposites. It was found that the curing temperature and the mixing conditions are key factors in the fabrication process, which influence the formation of conducting network significantly. Therefore, careful design of these factors in the fabrication process is required to achieve high electrical performances of nanocomposites. The experimental percolation threshold of the resultant nanocomposites was around 0.1 wt%. Moreover, a statistical percolation model was built up to numerically investigate the percolation threshold. The experimental electrical conductivity increases from the percolation threshold following a percolation-like power law with the identified critical exponent t as 1.75.     

Viscoelastic and mechanical properties of multi walled carbon nanotube/epoxy composites with different nanotube content

The viscoelastic and mechanical properties of composites multi walled carbon nanotube (MWNT)/epoxy at different weight fractions (0.1, 0.5, 1 and 2 wt.%) were evaluated by performing tensile and dynamic-mechanical thermal analysis (DMTA) tests. The MWNT/epoxy composite were fabricated by sonication and a cast molding process. The results showed that addition of nanotubes to epoxy had significant effect on the viscoelastic and mechanical properties. However, the use of 0.5 wt.% increased the viscoelastic properties more significantly. Concerning viscoelastic modeling, the COLE–COLE diagram has been plotted by the results of DMTA test. These results show a good agreement between the Perez model and the viscoelastic behavior of the composite.     

Curing effects of single-wall carbon nanotube reinforcement on mechanical properties of filled epoxy adhesives

Enhancing epoxy adhesives using nanoscale fillers requires understanding processing-structure–property relationships as a function of nanoscale filler loading. In particular, the effects of adding nanoscale reinforcement to filled epoxies, such as those qualified for space applications, have yet to be characterized. In this effort, the addition of single-walled carbon nanotubes (SWNTs) to Hysol 9309.2 epoxy was investigated using a multi-scale mechanical characterization approach. Effects of SWNTs on the kinetics of epoxy curing were characterized and modeled using macromechanical dynamic mechanical analysis (DMA). Adhesion between SWNTs and microfiber reinforcement was identified with scanning electron microscope (SEM), and effects of SWNTs on mechanical properties of the filled epoxy were quantified using micromechanical tensile testing. Effects of SWNT reinforcement on mechanical behavior of the epoxy matrix were also characterized using nanomechanical characterization. This multi-scale mechanical characterization enabled the effects of SWNTs to be isolated from the epoxy and filler phases inherent in the adhesive.     

A comparative study of the electrical and mechanical properties of epoxy nanocomposites reinforced by CVD- and arc-grown multi-wall carbon nanotubes

In this study, three different types of multi-wall carbon nanotubes (MWCNTs) were compared as nanostructured reinforcements in epoxy polymers: commercially available CVD-MWCNTs, synthesised in an industrial process, aligned-CVD-MWCNTs and arc-grown MWCNTs, both obtained from a lab-scale processes. The nanocomposite properties were characterised by means of electron microscopy, rheological, electrical and mechanical methods. Industrial CVD-MWCNTs are favourable for the implication of an electrical conductivity in the epoxy due to their high tendency to form conducting networks. The less entangled structure of aligned-CVD-MWCNTs turns out to be favourable for an easy dispersion and low viscosity in epoxy at similar conductivities compared to the CVD-MWCNTs. Additionally, they provide the highest increase in fracture toughness (∼17%). Arc-grown MWCNTs do not offer any electrical conductivity in epoxy without sufficient purification methods. Their high level of impurities and short length further complicate the transfer of their good electrical and mechanical properties into the nanocomposite.     

Effects of silane modification and temperature on tensile and fractural behaviors of carbon nanotube/epoxy nanocomposites

We investigated the effects of carbon nanotube (CNT) functionalization with silanes and temperature on the tensile and fractural characteristics of CNT/epoxy nanocomposites. Three groups of nanocomposites were fabricated using unmodified, oxidized and silanized CNTs, each at 0.1 wt%. Tensile and fractural tests were performed using the three nanocomposite samples at -30 degrees C, 20 degrees C, and 45 degrees C. Results showed that the tensile strength of silanized samples at -30 degrees C was about 89% and 241% higher, respectively, than at 20 degrees C and 45 degrees C. The elastic modulus of silanized CNT nanocomposite at -30 degrees C was about 52% and 871% higher, respectively, than at 20 degrees C and 45 degrees C. The fracture toughness of silanized samples was higher than those of unmodified and oxidized samples at all temperatures. However, fracture toughness decreased with decreasing temperature. Specifically, fracture toughness of silanized nanocomposites at -30 degrees C was about 76% and 117% lower, respectively, than those at 20 degrees C and 45 degrees C.     

Effects of nanotube helical angle on mechanical properties of carbon nanotube reinforced polymer composites

Carbon nanotubes (CNTs) possess exceptional mechanical properties and are therefore suitable candidates for use as reinforcements in composite materials. The CNTs, however, form complicated shapes and do not usually appear as straight reinforcements when introduced in polymer matrices. This results in a decrease in nanotube effectiveness in enhancing the matrix mechanical properties. In this paper, theory of elasticity of anisotropic materials and finite element method (FEM) are used to investigate the effects of CNT helical angle on effective mechanical properties of nanocomposites. Helical nanotubes with different helical angles are modeled to investigate the effects of nanotube helical angle on nanocomposite effective mechanical properties. In addition, the results of models consisting of helical nanotubes are compared with the effective mechanical properties of nanocomposites reinforced with straight nanotubes. Ultimately, the effects of helical CNT volume fraction on nanocomposite longitudinal modulus are investigated.     

Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties

Polypropylene (PP)/multi-wall carbon nanotubes (MWNTs) nanocomposites were prepared by diluting a PP/MWNT masterbatch by melt compounding with a twin screw extruder and prepared nanocomposites were characterized for their rheological, mechanical and morphological properties in terms of MWNT loading. The rheological results showed that the materials experience a fluid–solid transition at the composition of 2 wt.%, beyond which a continuous MWNT network forms throughout the matrix and in turn promotes the reinforcement. The tensile modulus and yield stress of the nanocomposites are substantially increased relative to the neat polypropylene. Nanotube reinforcement thus enhanced the yield stress, while reducing the ductility. The same behavior is observed in flexural tests. Charpy impact resistance of the notched samples increases slightly by the addition of MWNT, while impact resistance for the un-notched samples decreases with the addition of MWNTs. Finally, optimum in mechanical properties was observed at 2 wt.% MWNTs, which is near the rheological percolation threshold. From transmission electron microscopic (TEM) and scanning electron microscopy (SEM) images, it was observed that nanotubes are distributed reasonably uniformly indicating a good dispersion of nanotubes in the PP matrix. These results reveal that, preparation of nanocomposites from masterbatch dilution is an excellent method to obtain well-dispersed CNTs, while limiting the handling difficulties in plastics processing industrial workshops.     

Preparation and mechanical properties of carbon nanotube grafted glass fabric/epoxy multi-scale composites

In the present paper, carbon nanotubes (CNTs) were chemically grafted onto surfaces of the amino silane treated glass fabric by a novel chemical route for the first time to create 3D network on the glass fibers. The chemical bonding process was confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy. The glass fabric/CNT/epoxy multi-scale composite laminates were fabricated with the CNT grafted fabrics using vacuum assisted resin infusion molding. Tensile tests were conducted on fabricated multi-scale composites, indicating the grafting CNTs on glass fabric resulted a decrease (11%) in ultimate tensile strength while toughness of the multi-scale composite laminates were increased up to 57%. Flexural tests revealed that the multi-scale composite laminates prepared with CNT grafted glass fabric represent recovering after first load fall. The interfacial reinforcing mechanisms were discussed based on fracture morphologies of the multi-scale composites.     

Effect of sonication parameters on the mechanical properties of multi-walled carbon nanotube/epoxy composites

In this study, the effects of duration and output power of sonication on the dispersion state of 0.5 wt.% multi-walled carbon nanotube (MWNT) in epoxy matrix were investigated. To disperse the MWNT in the polymer matrix, sonication powers of 25, 50 and 100 W and sonication times of 15, 45 and 135 min were used. Dynamic mechanical thermal analysis (DMTA) and tensile test were performed under different dispersion states of MWNT. The results indicated that with increase in the sonication time, there was an initial increase in Young’s modulus values followed by a drop in values at longer sonication times. The highest Young modulus was gained for the sonication power of 50 W and sonication times of 45 min. Also the highest tensile strength was obtained for the sonication power of 25 W and sonication time of 45 min. Also sonication at 50 W for 15 min was the most effective dispersion for achieving the highest glass transition temperature (T_g). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to characterize the dispersion state of MWNT. Well dispersion was observed as the power and duration of sonication were increased.