Syntheses and characterisation of novel N/O trispirocyclic cyclotriphosphazenes as ligands for endotopic metal-binding complexes

Novel cis,trans,trans and cis,cis,cis N/O trispirocyclic cyclotriphosphazenes, ctt-4 and all-cis-4, were synthesised by the reaction of hexachlorocyclotriphosphazene, N₃P₃Cl₆ (1), with 2-(1H-pyrazol-3-yl)phenol 2 in the presence of base. The reactions of ctt-4 and all-cis-4 with copper(I) iodide afforded binuclear complex 5 and mononuclear complex 6, respectively. All new cyclotriphosphazenes were characterised by NMR spectroscopy and the complexes 5 and 6 were also characterised by single-crystal X-ray structural analysis.     

Comparison of HPLC and NMR characterization of the stereogenic properties of cyclotriphosphazene derivatives containing two equivalent centres of chirality: Cis (meso) and trans (racemic) isomers

The di-spiro derivatives of the reaction of gem-disubstituted cyclotriphosphazenes, N₃P₃Cl₄X₂ (X = Ph, PhS, PhNH, PhO) with 3-amino-1-propanol are expected to exist as cis and trans geometric isomers and exist as meso and racemic, respectively. The geometric isomers were separated by column chromatography on silica gel and analyzed by elemental analysis, mass spectrometry, and ³¹P and ¹H NMR spectroscopies. The stereogenic properties of all the compounds (trans, 2a–5a) and (cis, 2b–5b) were investigated by ³¹P NMR spectroscopy on the addition of a chiral solvating agent (CSA), (S)-(+)-2,2,2-trifluoro-1-(9′-anthryl)ethanol; one example of a derivative with the trans configuration (compound 5a, X = PhO) has been found where the ³¹P NMR/CSA method does not lead to the expected separation of the signals of enantiomers, even up to a molar ratio of CSA:compound of 50:1. On the other hand, chiral HPLC methods have been developed in order to characterize the trans (2a–5a) and cis (2b–5b) forms of the cyclotriphosphazene derivatives and give good separation of enantiomers for the trans disubstituted compounds (2a–5a). It is found that chiral HPLC is more reliable than the ³¹P NMR/CSA method for characterising the stereogenic properties of the cis and trans isomers of di-spiro 3-amino-1-propanoxy cyclophosphazene derivatives.     

Zirconium phosphonate immobilized chiral amino alcohol for heterogeneous enantioselective addition of diethylzinc to benzaldehyde

The chiral (1R,2S)-(−)-2-amino-1,2-diphenylethanol and (1S,2R)-(+)-2-amino-1,2-diphenylethanol had been immobilized on the layered frame of zirconium phosphate to obtain zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b. The enantioselective addition of Et₂Zn to benzaldehyde using zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b as heterogeneous catalysts yielded secondary alcohol in 80.1% yield and e.e. values of up to 54.3%, which was only 7.6% e.e. lower than that using the corresponding ligands (1R,2S)-(−)-2a and (1S,2R)-(+)-2b as homogeneous catalysts. The zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b were characterized by IR, SEM, XRD and TG analysis. SEM and XRD data showed that the catalysts (1S,2R)-(+)-4b and (1R,2S)-(−)-4a were in aggregate and mesopore structure with the same interlayer spacing 2.48 nm and pore diameter 5.6 nm.     

A cis-directing effect towards diols by an exocyclic P-NHR moiety in cyclotriphosphazenes

Cyclophosphazenes containing the P-NHR moiety in an exocyclic spiro ring, N₃P₃Cl₄[NH(CH₂)₃O], (1), and N₃P₃Cl₄[NH(CH₂)₃NMe], (2), were used to investigate a possible directing effect of the P-NHR moiety on the formation of products in the nucleophilic substitution reactions with diols such as tetraethyleneglycol, 1,3-propanediol and 2,2-dimethyl-1,3-propanediol. The ³¹P NMR spectra of the reaction mixtures showed that only one kind of ansa product is formed in each of these reactions. X-ray crystallographic studies of the ansa products [(4a), (5a), (6a) and (7a)] have provided definitive proof of the cis-directing effect of the P-NHR moiety in cyclotriphosphazenes. It is likely that hydrogen-bond interaction between the incoming nucleophile and the P-NHR moiety of the reactant accounts for the preference for products with the substituents cis to the NH group.     

Ru(II)–CO complexes of thioarylazoimidazoles: Syntheses,structures, spectroscopy and DFT calculation

The complexes, cis-(CO)-trans-(Cl)-[Ru(SRaaiNR)(CO)₂Cl₂] (2) and trans-(Cl)-[Ru(SRaaiNR)(CO)Cl₂] (3) (SRaaiNR = 1-alkyl-2-{(o-thioalkyl)phenylazo}imidazoles; R = Me (1a) and Et (1b)) have been synthesized and characterized. The structural confirmation is achieved by single crystal X-ray structure determinations. The complexes show Ru(III)/Ru(II) couple and ligand reductions. Electronic structure and spectral properties of the complexes have been explained with the DFT and TDDFT calculation.     

Ring-opening metathesis polymerization of amino acid-functionalized norbornene diester monomers

Amino acid-derived novel norbornene diester derivatives, 5-norbornene-endo,endo-2,3-dicarboxylic acid bis((S)-2-N-(tert-butoxycarbonyl)aminopropyl) ester (1a), 5-norbornene-exo,exo-2,3-dicarboxylic acid bis((S)-2-N-(tert-butoxycarbonyl)aminopropyl) ester (1b), bis(N-α-(tert-butoxycarbonyl)-l-alanine) 5-norbornene-2,3-endo,endo-dimethyl ester (2a), bis(N-α-(tert-butoxycarbonyl)-l-alanine) 5-norbornene-2,3-exo,exo-dimethyl ester (2b) were synthesized and polymerized by the Grubbs catalyst, 2nd generation. Ring-opening metathesis polymerization of the monomers satisfactorily proceeded to give the polymers with fairly high molecular weights in good yields. The polymerization rate was not affected by the stereostructure of the monomers, endo,endo- and exo,exo-, while largely affected by solvents. The order of polymerization rate was as follows: acetone-d₆ > benzene-d₆ > DMF-d₇ ≈ CD₂Cl₂ > CDCl₃.     

O-Demethylation reaction at a diruthenium core: synthesis and structural study of two novel diruthenium compounds

The reaction between Ru₂(OAc)₄Cl and di(o-methoxyphenyl)formamidine led to the unexpected products trans-Ru₂(O₂CCH₃)₂(μ-N,N′-η²-N,O-o-MeOForm)(μ-N,N′-η²-N,O-o-MeOForm′) (1) and Ru₂(O₂CCH₃)(μ-N,N′-o-MeOForm)(μ-N,N′-η²-N,O-o-MeOForm)(μ-N,N′-η²-N,O-o-MeOForm′) (2), where o-MeOForm is di(o-methoxyphenyl)formamidinate, and o-MeOForm′ is the O-demethylation derivative of o-MeOForm, (o-methoxyphenyl)(o-oxyphenyl)formamidinate. Both compounds 1 and 2 were structurally characterized by X-ray diffraction analysis, and are isoelectronic with the previously studied chloro-tetracarboxylatodiruthenium(II,III) and chlorotetrakis(diarylformamidinato)diruthenium(II,III) on the basis of structural and magnetic data.     

Synthesis and gas permeation properties of various Si-containing poly(diarylacetylene)s and their desilylated membranes

Diarylacetylene monomers having trimethylsilyl groups and other substituents (substituted biphenyl, 1a and 1b; trimethylsilylmethylphenyl, 1c-e) were synthesized and polymerized with TaCl₅-n-Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s (2a-d). Polymers 2a-c had high molecular weights and were soluble in common organic solvents. Free-standing membranes of 2a-c as well as previously reported 2f-h were prepared by the solution-casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid to afford 3a, 3b, and 3f-h. Upon desilylation, biphenyl-containing membranes became less permeable (3a, b), whereas fluorene-containing membranes became more permeable (3f-h). In particular, 3h exhibited extremely high gas permeability (PO₂ = 9800 barrers), which is about the same as that of poly(1-trimethylsilyl-1-propyne). Desilylated membranes 3a and 3f-h showed different gas permeability from that of polymers 2i-k which have the identical chemical structures and obtained directly by the polymerization of the corresponding monomers.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Photo- and electroluminescence from deep-red- and near-infrared-phosphorescent tris-cyclometalated iridium(III) complexes bearing largely π-extended ligands

Deep-red- and near-infrared-phosphorescent tris-cyclometalated iridium(III) complexes bearing largely π-extended cyclometalated (C^N) ligands were newly synthesized, and their photo- and electroluminescence properties were investigated. When 2-(benzo[b]furan-2-yl)quinoline and 2-(benzo[b]thiophen-2-yl)quinoline were employed as C^N ligands, deep-red photoluminescence was obtained (Ir-1a and Ir-1b; λ_PL in CH₂Cl₂, 647 and 652 nm, respectively). In the case of the isoquinoline analogues of Ir-1a and Ir-1b, emission maxima were further red-shifted, ranging from deep-red to near-infrared regions (Ir-2a and Ir-2b; λ_PL in CH₂Cl₂, 696 and 690 nm, respectively). Especially, Ir-2b showed an excellent photoluminescence quantum yield (Φ_PL = 0.15), and a polymer light-emitting diode doped with Ir-2b exhibited deep-red–near-infrared electroluminescence with a high external quantum efficiency (λ_EL = 694 nm, η_{ext max} = 1.41%).     

Zirconium phosphonate immobilized chiral amino alcohol for heterogeneous enantioselective addition of diethylzinc to benzaldehyde

The chiral (1R,2S)-(−)-2-amino-1,2-diphenylethanol and (1S,2R)-(+)-2-amino-1,2-diphenylethanol had been immobilized on the layered frame of zirconium phosphate to obtain zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b. The enantioselective addition of Et₂Zn to benzaldehyde using zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b as heterogeneous catalysts yielded secondary alcohol in 80.1% yield and e.e. values of up to 54.3%, which was only 7.6% e.e. lower than that using the corresponding ligands (1R,2S)-(−)-2a and (1S,2R)-(+)-2b as homogeneous catalysts. The zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b were characterized by IR, SEM, XRD and TG analysis. SEM and XRD data showed that the catalysts (1S,2R)-(+)-4b and (1R,2S)-(−)-4a were in aggregate and mesopore structure with the same interlayer spacing 2.48 nm and pore diameter 5.6 nm.     

Cage-opening supramolecular isomerism in Cu(II) complexes

Reactions of Cu(NO₃)₂·3H₂O or Cu(CF₃SO₃)₂·6H₂O with semirigid ligands 2,6-bis(pyridin-3-ylmethyl)-3a,4,4a,7a,8,8a-hexahydro-4,8-ethenopyrrolo[3,4-f]isoindole-1,3,5,7(2H,6H)-tetraone (L1) and 2,6-bis(pyridin-4-ylmethyl)-3a,4,4a,7a,8,8a-hexahydro-4,8-ethenopyrrolo[3,4-f]isoindole-1,3,5,7(2H,6H)-tetraone (L2) result in 0D tetragonal prismatic cage (1, 4), 1D loop-and-chain (2, 5, 6), and 2D (4,4) network (3) metal-organic complexes, which comprise of U_a, U_b or Z type ligand conformations, respectively. Solid state X-ray diffraction and solution state ESI-MS analyses manifest the ring-opening isomerization mechanism among the complexes, and photoluminescence properties are also studied.     

A facile galvanostatic method for the synthesis of quinoxalinediones

Electrochemical oxidation of catechols (1a-d) has been studied in the presence of N,N-dimethylethylendiamine (3) as a nucleophile in aqueous solutions, using cyclic voltammetry, constant-current coulometry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (2a-d) participate in Michael addition reactions with N,N′-dimethylethylendiamine (3) via the ECECE mechanism to form the corresponding quinoxalinedione derivatives (6a-c).     

Formation of an unusual copper(II) complex from the degradation of a novel tricopper(II) carbohydrazone complex

An unusual copper(II) complex [Cu(L^1a)₂Cl₂] CH₃OH·H₂O·H₃O⁺Cl⁻ (1a) was isolated from a solution of a novel tricopper(II) complex [Cu₃(HL¹)Cl₂]Cl₃·2H₂O (1) in methanol, where L^1a is 3-(2-pyridyl)triazolo[1,5-a]-pyridine, and characterized with single crystal X-ray diffraction study. The tricopper(II) complex of potential ligand 1,5-bis(di-2-pyridyl ketone) carbohydrazone (H₂L¹) was synthesized and physico-chemically characterized, while the formation of the complex 1a was followed by time-dependant monitoring of the UV–visible spectra, which reveals degradation of ligand backbone as intensity loss of bands corresponding to O → Cu(II) charge transfer.     

Synthesis and gas permeability of nitrated and aminated Poly(diphenylacetylene)s

Poly(diphenylacetylene) [PDPA] derivatives were nitrated using a mixture of nitric acid and sulfuric acid. Nitration of poly[1-(p-trimethylsilyl)phenyl-2-phenylacetylene] (1a) proceeded, and the nitro groups were substituted to trimethylsilyl groups on benzene rings. The degree of nitration (DN) increased with reaction time, and it reached 0.41 for 3.0 h. Fluorine-containing PDPA (1b and 1c) showed less reactivity for nitration, and the DNs were only 0.18 and 0.06, respectively, under the same conditions. Nitration of PDPAs having n-butyl and t-butyl groups (1d and 1e) afforded the nitrated PDPAs, whose DN were 0.20 and 0.14, respectively. Reduction of nitro groups on PDPAs proceeded quantitatively to produce the corresponding PDPAs possessing amino groups (3a-e). Aminated PDPAs exhibited high CO₂ permselectivity compared to the corresponding non-aminated PDPAs. The CO₂ permeability coefficients of aminated PDPAs (3a-d) were lower than those of the corresponding polymers (1a-d) because the polymer chain packing was strengthened by the intermolecular interaction between polar amino groups, but t-butyl group-containing aminated PDPA (3e) showed high CO₂ permeability than 1e because the chain packing was weakened by the steric repulsion of bulky t-butyl groups.     

Synthesis and ion responsiveness of optically active polyacetylenes containing salicylidene Schiff-base moieties

Acetylenic monomers containing salicylidene Schiff-base groups (1a and 1b) as well as Schiff-base and hydroxy groups (1c) were synthesized and polymerized with [(nbd)RhCl]₂/Et₃N catalyst to afford the corresponding polymers 2a–c with high molecular weights (M_n = 2.6–7.2 × 10⁵) in high yields (75–97%). Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that the polymers formed helical structures with a predominantly one-handed screw sense. The addition of metal ions to salicylidene Schiff-base-containing polymers 2a and 2b produced insoluble polymer/metal complexes through ionic cross-linking as a result of salicylaldimine–metal ion complexation. Polymers 2b and 2c underwent a helix–coil transition upon the addition of HSO₄⁻, whereas these polymers did not exhibit responsiveness to other anions, such as F⁻, Cl⁻, and Br⁻.