Design of Magnetic‐Plasmonic Nanoparticle Assemblies via Interface Engineering of Plasmonic Shells for Targeted Cancer Cell Imaging and Separation

Magnetic‐plasmonic nanoparticles have received considerable attention for widespread applications. These nanoparticles (NPs) exhibiting surface‐enhanced Raman scattering (SERS) activities are developed due to their potential in bio‐sensing applicable in non‐destructive and sensitive analysis with target‐specific separation. However, it is challenging to synthesize these NPs that simultaneously exhibit low remanence, maximized magnetic content, plasmonic coverage with abundant hotspots, and structural uniformity. Here, a method that involves the conjugation of a magnetic template with gold seeds via chemical binding and seed‐mediated growth is proposed, with the objective of obtaining plasmonic nanostructures with abundant hotspots on a magnetic template. To obtain a clean surface for directly functionalizing ligands and enhancing the Raman intensity, an additional growth step of gold (Au) and/or silver (Ag) atoms is proposed after modifying the Raman molecules on the as‐prepared magnetic‐plasmonic nanoparticles. Importantly, one‐sided silver growth occurred in an environment where gold facets are blocked by Raman molecules; otherwise, the gold growth is layer‐by‐layer. Moreover, simultaneous reduction by gold and silver ions allowed for the formation of a uniform bimetallic layer. The enhancement factor of the nanoparticles with a bimetallic layer is approximately 10⁷. The SERS probes functionalized cyclic peptides are employed for targeted cancer‐cell imaging and separation.     

Synergistic Modulation of Surface Interaction to Assemble Metal Nanoparticles into Two‐Dimensional Arrays with Tunable Plasmonic Properties

A simple strategy based on the synergistic modulation of inter‐particle and substrate‐particle interaction is applied for the large‐scale fabrication of two‐dimensional (2D) Au and Ag nanoparticle arrays. The surface charge of the substrate is used to redistribute the double layer electric charges on the particles and to modulate the inter‐particle distance within the 2D nanoparticle arrays on the substrate. The resultant arrays, with a wide range of inter‐particle distances, display tunable plasmonic properties. It can be foreseen that such 2D nanoparticle arrays possess potential applications as multiplexed colorimetric sensors, integrated devices and antennas. Herein, it is demonstrated that these arrays can be employed as wavelength‐selective substrates for multiplexed acquisition of surface‐enhanced Raman scattering (SERS) spectra. This simple one step process provides an attractive and low cost strategy to produce high quality and large area 2D ordered arrays with tunable properties.     

Native MicroRNA Targets Trigger Self‐Assembly of Nanozyme‐Patterned Hollowed Nanocuboids with Optimal Interparticle Gaps for Plasmonic‐Activated Cancer Detection

The modernized use of nucleic acid (NA) sequences to drive nanostructure self‐assembly has given rise to a new class of designed nanomaterials with controllable plasmonic functionalities for broad surface‐enhanced Raman scattering (SERS)‐based bioanalysis applications. Herein, dual usage of microRNAs (miRNAs) as both valuable cancer biomarkers and direct self‐assembly triggers is identified and capitalized upon for custom‐designed plasmonic nanostructures. Through strict NA hybridization of miRNA targets, Au nanospheres selectively self‐assemble onto hollowed Au/Ag alloy nanocuboids with ideal interparticle distances (≈2.3 nm) for optimal SERS signaling. The intrinsic material properties of the self‐assembled nanostructures further elevate miRNA detection performance via nanozyme catalytic SERS signaling cascades. This enables fM‐level miR‐107 detection limit within a clinically‐relevant range without any molecular target amplification. The miRNA‐triggered nanostructure self‐assembly approach is further applied in clinical patient samples, and showcases the potential of miR‐107 as a non‐invasive prostate cancer diagnostic biomarker. The use of miRNA targets to drive nanostructure self‐assembly holds great promise as a practical tool for miRNA detection in disease applications.     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

Fabrication of Lamellar Nanosphere Structure for Effective Stress‐Management in Large‐Volume‐Variation Anodes of High‐Energy Lithium‐Ion Batteries

The use of high‐capacity anode materials to overcome the energy density limits imposed by the utilization of low‐theoretical‐capacity conventional graphite has recently drawn increased attention. Until now, stress management (including strategies relying on size, surface coating, and free volume control) has been achieved by addressing the critical problems originating from significant anode volume expansion upon lithiation. However, commercially viable alternatives to graphite have not yet been found. A new stress‐management strategy relying on the use of a lamellar nanosphere Si anode is proposed. Specifically, nanospheres comprising ≈50 nm Si nanoparticles encapsulated by SiO_x /Si/SiO_x /C layers with thicknesses of <20 nm per layer are synthesized via one‐pot chemical vapor deposition in various atmospheres. SiO_x is found to act as a stress management interlayer when it is located between Si and mitigates stress intensification on the surface layer, allowing nanospheres to maintain their morphological integrity and promoting the formation of a stable solid electrolyte interphase layer during cycling. When tested using an industrial protocol, a full cell comprising a nanosphere/graphite blended anode and a lithium cobalt oxide cathode achieve an average energy density of 2440.2 Wh L^?1 (1.72 times higher than that of conventional graphite) with a capacity retention ratio of 80% after 101 cycles.     

Pen‐on‐Paper Approach Toward the Design of Universal Surface Enhanced Raman Scattering Substrates

The translation of a technology from the laboratory into the real world should meet the demand of economic viability and operational simplicity. Inspired by recent advances in conductive ink pens for electronic devices on paper, we present a “pen‐on‐paper” approach for making surface enhanced Raman scattering (SERS) substrates. Through this approach, no professional training is required to create SERS arrays on paper using an ordinary fountain pen filled with plasmonic inks comprising metal nanoparticles of arbitrary shape and size. We demonstrate the use of plasmonic inks made of gold nanospheres, silver nanospheres and gold nanorods, to write SERS arrays that can be used with various excitation wavelengths. The strong SERS activity of these features allowed us to reach detection limits down to 10 attomoles of dye molecules in a sample volume of 10 μL, depending on the excitation wavelength, dye molecule and type of nanoparticles. Furthermore, such simple substrates were applied to pesticide detection down to 20 ppb. This universal approach offers portable, cost effective fabrication of efficient SERS substrates at the point of care. This approach should bring SERS closer to the real world through ink cartridges to be fixed to a pen to create plasmonic sensors at will.     

Plasmonic Cyclic Au Nanosphere Hexamers (Small 7/2023)

Rational design of plasmonic colloidal assemblies via bottom-up synthesis is challenging but would show unprecedented optical properties that strongly relate to the assembly's shape and spatial arrangement. Herein, the synthesis of plasmonic cyclic Au nanosphere hexamers (PCHs) is reported, wherein six Au nanospheres (Au NSs) are connected via thin metal ligaments. By tuning Au reduction, six dangling Au NSs are interconnected with a core hexagon nanoplate (NPL). Then, Pt atoms are selectively deposited on the edges of the spheres. After etching of the core, necklace-like nanostructures of Pt framework are obtained. Deposition of Au is followed, leading to PCHs in high yield (≈90%). Notably, PCHs exhibit the combinatorial plasmonic characteristics of individual Au NSs and the in-plane coupling of the six linked Au NSs. They yield highly uniform, reproducible, and polarization-independent single-particle surface-enhanced Raman scattering signals, which are attributed to the 2-dimensional isotropic alignment of the Au NSs. Those are applied to a SERS-based immunoassay as quantitative and qualitative single particle SERS nanoprobes. This assay shows a low limit-of-detection, down to 100 pm , which is orders of magnitude lower than those based on Au NSs, and one order of magnitude lower than an assay using analogous particles of smooth Au nanorings.     

Multilayer Amorphous‐Si‐B‐C‐N/γ‐Al2O3/α‐Al2O3 Membranes for Hydrogen Purification

The hydrogen and carbon monoxide separation is an important step in the hydrogen production process. If H₂ can be selectively removed from the product side during hydrogen production in membrane reactors, then it would be possible to achieve complete CO conversion in a single‐step under high temperature conditions. In the present work, the multilayer amorphous‐Si‐B‐C‐N/γ‐Al₂O₃/α‐Al₂O₃ membranes with gradient porosity have been realized and assessed with respect to the thermal stability, geometry of pore space and H₂/CO permeance. The α‐Al₂O₃ support has a bimodal pore‐size distribution of about 0.64 and 0.045 µm being macroporous and the intermediate γ‐Al₂O₃ layer—deposited from boehmite colloidal dispersion—has an average pore‐size of 8 nm being mesoporous. The results obtained by the N₂‐adsorption method indicate a decrease in the volume of micropores—0.35 vs. 0.75 cm³ g^?1—and a smaller pore size ?6.8 vs. 7.4 Å—in membranes with the intermediate mesoporous γ‐Al₂O₃ layer if compared to those without. The three times Si‐B‐C‐N coated multilayer membranes show higher H₂/CO permselectivities of about 10.5 and the H₂ permeance of about 1.05 × 10^?8 mol m^?2 s^?1 Pa^?1. If compared to the state of the art of microporous membranes, the multilayer Si‐B‐C‐N/γ‐Al₂O₃/α‐Al₂O₃ membranes are appeared to be interesting candidates for hydrogen separation because of their tunable nature and high‐temperature and high‐pressure stability.     

Understanding the Enhancement Mechanisms of Surface Plasmon‐Mediated Photoelectrochemical Electrodes: A Case Study on Au Nanoparticle Decorated TiO2 Nanotubes

Surface plasmon resonance (SPR) enhancement in photocatalyst and photovoltaics has been widely studied and different enhancement mechanisms have been established based on different heterostructure interface configurations. This work is intended to unveil the mechanisms behind charge or energy transfer in different plasmonic configurations of metal particle–semiconductor interfaces, especially with a dielectric layer. For this purpose, a series of composite photoelectrodes based on anodic TiO₂ nanotube (TONT) backbones coated with Au, Al₂O_3, or both are designed and characterized systematically. In conjunction with both experimental measurements and numerical simulations, it is revealed that in the TONT‐Al₂O₃‐Au electrode system (i.e., a thin nonconductive spacer between semiconductor and metal), the enhancement is dominantly governed by SPR‐mediated hot‐electron injection rather than conventional‐thought near‐field electromagnetic enhancement. Among all configurations, the TONT‐Au‐Al₂O₃ electrode shows the best photoresponse in both UV and visible regions. The superior visible light response of the TONT‐Au‐Al₂O₃ electrode is ascribed to the Al₂O₃ intensified local electromagnetic field that enhances the hot‐electron injection through the TiO₂‐Au interface, and an effective surface passivation by the Al₂O₃ coating.     

Recent Advances in the Synthesis of Intra-Nanogap Au Plasmonic Nanostructures for Bioanalytical Applications

Plasmonic nanogap-enhanced Raman scattering has attracted considerable attention in the fields of Raman-based bioanalytical applications and materials science. Various strategies have been proposed to prepare nanostructures with an inter- or intra-nanogap for fundamental study models or applications. This report focuses on recent advances in synthetic methods to fabricate intra-nanogap structures with diverse dimensions, with detailed focus on the theory and bioanalytical applications. Synthetic strategies ranging from the use of a silica layer to small molecules, the use of polymers and galvanic replacement, are extensively investigated. Furthermore, various core structures, such as spherical, rod-, and cube-shaped, are widely studied, and greatly expand the diversity of plasmonic nanostructures with an intra-nanogap. Theoretical calculations, ranging from the first plasmonic hybridization model that is applied to a concentric Au–SiO₂–Au nanosphere to the modern quantum corrected model, have evolved to accurately describe the plasmonic resonance property in concentric core–shell nanostructures with a subnanometer nanogap. The greatly enhanced and uniform Raman responses from the localized Raman reporter in the built-in nanogap have made it possible to achieve promising probes with an extraordinary high sensitivity in various formats, such as biomolecule detection, high-resolution cell imaging, and an in vivo imaging application.     

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost‐effective self‐assembly of 80 nm Au nanoparticles (NPs) into large‐domain, hexagonally close‐packed arrays for high‐sensitivity and high‐fidelity surface‐enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite‐difference time‐domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum‐gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3–5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10⁴ is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10⁸ is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.     

High Figure of Merit (FOM) of Bragg Modes in Au‐Coated Nanodisk Arrays for Plasmonic Sensing

Gold‐coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface‐enhanced Raman scattering (SERS), large‐scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface‐guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold‐coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96‐well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high‐performance plasmonic sensing.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.     

Fabricating a Homogeneously Alloyed AuAg Shell on Au Nanorods to Achieve Strong,Stable, and Tunable Surface Plasmon Resonances

Colloidal metal nanocrystals with strong, stable, and tunable localized surface plasmon resonances (SPRs) can be useful in a corrosive environment for many applications including field‐enhanced spectroscopies, plasmon‐mediated catalysis, etc. Here, a new synthetic strategy is reported that enables the epitaxial growth of a homogeneously alloyed AuAg shell on Au nanorod seeds, circumventing the phase segregation of Au and Ag encountered in conventional synthesis. The resulting core–shell structured bimetallic nanorods (AuNR@AuAg) have well‐mixed Au and Ag atoms in their shell without discernible domains. This degree of mixing allows AuNR@AuAg to combine the high stability of Au with the superior plasmonic activity of Ag, thus outperforming seemingly similar nanostructures with monometallic shells (e.g., Ag‐coated Au NRs (AuNR@Ag) and Au‐coated Au NRs (AuNR@Au)). AuNR@AuAg is comparable to AuNR@Ag in plasmonic activity, but that it is markedly more stable toward oxidative treatment. Specifically, AuNR@AuAg and AuNR@Ag exhibit similarly strong signals in surface‐enhanced Raman spectroscopy that are some 30‐fold higher than that of AuNR@Au. When incubated with a H₂O₂ solution (0.5 m ), the plasmonic activity of AuNR@Ag immediately and severely decayed, whereas AuNR@AuAg retained its activity intact. Moreover, the longitudinal SPR frequency of AuNR@AuAg can be tuned throughout the red wavelengths (≈620–690 nm) by controlling the thickness of the AuAg alloy shell. The synthetic strategy is versatile to fabricate AuAg alloyed shells on different shaped Au, with prospects for new possibilities in the synthesis and application of plasmonic nanocrystals.     

Hydrogen-Doping-Induced Metal-Like Ultrahigh Free-Carrier Concentration in Metal-Oxide Material for Giant and Tunable Plasmon Resonance

The practical utilization of plasmon-based technology relies on the ability to find high-performance plasmonic materials other than noble metals. A key scientific challenge is to significantly increase the intrinsically low concentration of free carriers in metal-oxide materials. Here, a novel electron–proton co-doping strategy is developed to achieve uniform hydrogen doping in metal-oxide MoO₃ at mild conditions, which creates a metal-like ultrahigh free-carrier concentration approaching that of noble metals (10²¹ cm⁻³ in H_1.68MoO₃ versus 10²² cm⁻³ in Au/Ag). This bestows giant and tunable plasmonic resonances in the visible region to this originally semiconductive material. Using ultrafast spectroscopy characterizations and first-principle simulations, the formation of a quasi-metallic energy band structure that leads to long-lived and strong plasmonic field is revealed. As verified by the surface-enhanced Raman spectra (SERS) of rhodamine 6G molecules on H_xMoO₃, the SERS enhancement factor reaches as high as 1.1 × 10⁷ with a detection limit at concentration as low as 1 × 10⁻⁹ mol L⁻¹, representing the best among the hitherto reported non-metal systems. The findings not only provide a set of metal-like semiconductor materials with merits of low cost, tunable electronic structure, and plasmonic resonance, but also a general strategy to induce tunable ultrahigh free-carrier concentration in non-metal systems.     

Surface-enhanced Raman spectroscopy studies of orderly arranged silica nanospheres-synthesis,characterization and dye detection

Silica nanospheres have been explored much for drug delivery, photocatalysis, sensors and energy storage applications. It also acts as a template for Surface-Enhanced Raman Spectroscopy (SERS) substrates. Uniform nanostructures at low cost with high reproducibility are the major challenges in SERS substrate fabrication. In the present work, silica nanospheres were synthesized using stober method and deposited on to glass slides using Vertical deposition techniques. Different size/thickness of Silver (Ag) nanoparticles were deposited onto silica thin films using sputter deposition technique. The monodispersity of silica nanospheres and size of silver nanoparticles (10 nm, 20 nm and 30 nm) were confirmed by FESEM analysis. The structural properties were confirmed through XRD. UV–Vis analysis revealed that the plasmonic properties of Ag@SiO₂ give high surface plasmons for 30 nm thickness of silver. The binding energy of Ag@SiO₂ confirmed through XPS spectrum. The fabricated SERS substrates were used to detect Rhodamine 6G (R6G), Methylene blue (MB), Methylene violet (MV) and Methyl orange dyes as an analyte molecule with a limit of detection at about 10^?11 mol/L. The addition of SiO₂ nanospheres decreases the Ag oxidation rate and increases their stability. The maximum enhancement factor (1.5?×?10⁷) achieved for 30nm thickness of Ag@SiO₂. The results and technique establish the potential applications and reproducible SERS substrate.

     

Split‐GFP: SERS Enhancers in Plasmonic Nanocluster Probes

The assembly of plasmonic metal nanoparticles into hot spot surface‐enhanced Raman scattering (SERS) nanocluster probes is a powerful, yet challenging approach for ultrasensitive biosensing. Scaffolding strategies based on self‐complementary peptides and proteins are of increasing interest for these assemblies, but the electronic and the photonic properties of such hybrid nanoclusters remain difficult to predict and optimize. Here, split‐green fluorescence protein (sGFP) fragments are used as molecular glue and the GFP chromophore is used as a Raman reporter to assemble a variety of gold nanoparticle (AuNP) clusters and explore their plasmonic properties by numerical modeling. It is shown that GFP seeding of plasmonic nanogaps in AuNP/GFP hybrid nanoclusters increases near‐field dipolar couplings between AuNPs and provides SERS enhancement factors above 10⁸. Among the different nanoclusters studied, AuNP/GFP chains allow near‐infrared SERS detection of the GFP chromophore imidazolinone/exocyclic C?C vibrational mode with theoretical enhancement factors of 10⁸–10⁹. For larger AuNP/GFP assemblies, the presence of non‐GFP seeded nanogaps between tightly packed nanoparticles reduces near‐field enhancements at Raman active hot spots, indicating that excessive clustering can decrease SERS amplifications. This study provides rationales to optimize the controlled assembly of hot spot SERS nanoprobes for remote biosensing using Raman reporters that act as molecular glue between plasmonic nanoparticles.     

Molecular Beam Epitaxy Scalable Growth of Wafer‐Scale Continuous Semiconducting Monolayer MoTe2 on Inert Amorphous Dielectrics

Monolayer MoTe₂, with the narrowest direct bandgap of ≈1.1 eV among Mo‐ and W‐based transition metal dichalcogenides, has attracted increasing attention as a promising candidate for applications in novel near‐infrared electronics and optoelectronics. Realizing 2D lateral growth is an essential prerequisite for uniform thickness and property control over the large scale, while it is not successful yet. Here, layer‐by‐layer growth of 2 in. wafer‐scale continuous monolayer 2H‐MoTe₂ films on inert SiO₂ dielectrics by molecular beam epitaxy is reported. A single‐step Mo‐flux controlled nucleation and growth process is developed to suppress island growth. Atomically flat 2H‐MoTe₂ with 100% monolayer coverage is successfully grown on inert 2 in. SiO₂/Si wafer, which exhibits highly uniform in‐plane structural continuity and excellent phonon‐limited carrier transport behavior. The dynamics‐controlled growth recipe is also extended to fabricate continuous monolayer 2H‐MoTe₂ on atomic‐layer‐deposited Al₂O₃ dielectric. With the breakthrough in growth of wafer‐scale continuous 2H‐MoTe₂ monolayers on device compatible dielectrics, batch fabrication of high‐mobility monolayer 2H‐MoTe₂ field‐effect transistors and the three‐level integration of vertically stacked monolayer 2H‐MoTe₂ transistor arrays for 3D circuitry are successfully demonstrated. This work provides novel insights into the scalable synthesis of monolayer 2H‐MoTe₂ films on universal substrates and paves the way for the ultimate miniaturization of electronics.     

3D Interdigital Au/MnO2/Au Stacked Hybrid Electrodes for On‐Chip Microsupercapacitors

On‐chip microsupercapacitors (MSCs) have application in powering microelectronic devices. Most of previous MSCs are made from carbon materials, which have high power but low energy density. In this work, 3D interdigital Au/MnO₂/Au stacked MSCs have been fabricated based on laser printed flexible templates. This vertical‐stacked electrode configuration can effectively increase the contact area between MnO₂ active layer and Au conductive layer, and thus improve the electron transport and electrolyte ion diffusion, resulting in enhanced pseudocapacitive performance of MnO₂. The stacked electrode can achieve an areal capacitance up to 11.9 mF cm^?2. Flexible and all‐solid‐state MSCs are assembled based on the sandwich hybrid electrodes and PVA/LiClO₄ gel electrolyte and show outstanding high‐rate capacity and mechanical flexibility. The laser printing technique in this work combined with the physical sputtering and electrodeposition allows fabrication of MSC array with random sizes and patterns, making them promising power sources for small‐scale flexible microelectronic energy storage systems (e.g., next‐generation smart phones).     

Ultrasensitive Surface‐Enhanced Raman Spectroscopy Detection Based on Amorphous Molybdenum Oxide Quantum Dots

Surface‐enhanced Raman spectroscopy (SERS) based on plasmonic semiconductive material has been proved to be an efficient tool to detect trace of substances, while the relatively weak plasmon resonance compared with noble metal materials restricts its practical application. Herein, for the first time a facile method to fabricate amorphous H_xMoO₃ quantum dots with tunable plasmon resonance is developed by a controlled oxidization route. The as‐prepared amorphous H_xMoO₃ quantum dots show tunable plasmon resonance in the region of visible and near‐infrared light. Moreover, the tunability induced by SC CO₂ is analyzed by a molecule kinetic theory combined with a molecular thermodynamic model. More importantly, the ultrahigh enhancement factor of amorphous H_xMoO₃ quantum dots detecting on methyl blue can be up to 9.5 × 10⁵ with expending the limit of detection to 10^?9 m . Such a remarkable porperty can also be found in this H_xMoO₃‐based sensor with Rh6G and RhB as probe molecules, suggesting that the amorphous H_xMoO₃ quantum dot is an efficient candidate for SERS on molecule detection in high precision.